Problem with EMDP0001 customer field es60

Hi everybody. I added a new field (ci_evbs) in the t-code es60 using EMDP0001. The new field is showed in the t-code. the problem is that the data is not saved in the field, either in the table. my new fied is called "zzpsumintxt01"
I have filled this exits:
1.- EXIT_SAPLES60_002.
           move x_evbsd-zzpsumitxt01 to y_evbsd-zzpsumitxt01.
2.- EXIT_SAPLES60_003.
           move x_sub_obj-evbs-ZZPSUMITXT01 to xy_evbsd-ZZPSUMITXT01.
3.- EXIT_SAPLES60_007.
            move x_evbsd-ZZPSUMITXT01 to xy_sub_obj-evbs-ZZPSUMITXT01.
Is there anything else that i have to do that i'm not doing? because the field is ok, but it doesnt contain data or save it.
Anyone knows how to solve this problem?
thanks a lot.

Hello Miguel,
Can you please post your solution to this issue?
I'm having the same issue.
Thank you.
Allan

Similar Messages

Problem with the custom field - enabling

hi,
i am using one customer field in the shopping card header , and using BBP_DOC_CHECK_BADI to issue an error message if this field is left empty.
but the problem comes after the error message is issues , this field becomes disabled , and the user has to go back , and again come to the order screen to enter the value and order the cart.
i have tried all possible options , to keep the customer field enabled , but not able to do so.
have you got any inputs for me..
Edited by: khan voyalpad usman on Aug 21, 2008 12:29 PM

Hi,
Have you checked the BBP_CUF_BADI_2 implementation in your system ??
May be some logic there is disabling the customer field right after the error message is generated..
Thanks,
Pradeep

Problem is with the custom field validate in the custome tab

Hello Experts,
We have created additional tab in cProject Project definition level
with some Custom fields.
1. These all custom field we have maintained search help with Check
table. But cProject screen these fields it is allowing other values
also aprt from check table values. It is not through any error while
entering wrong value apart from check table values. Properly maintained
the check tables in back end.
2. One custom fields my client need only to allow Numeric values only.
For this we change the data element as 'NUMC' in field. But it is
allowing entering the char value also.
Kindly suggest if anything is needed to be done in webdynpro component
level to maintain validations for custom fields.
Thanks in advance for your help.
Thanks & Regards,
Raj

Hello Raj
I am having the same issue. Have you been able to resolve yours, and how did you ressolve it?
Thanks
Chatsworth

Problem with a Dynpro field (type numc)

hi everybody.
I'm developping a ModulPool application in wich i have 2 RadioButtons with 2 textbox fields.
What i pretend to do is, when the user clicks a radiobutton and strikes Intro, enable the corresponding textbox field and disable the other one.
My code runs fine, but i have a little problem. When I loop the screen table, to set the appropiate value to the 'input' property, in this case, when i try to disable it (input = '0'), I get a zero character in that field. This field has NUMC type, i'm sure this is the problem
'cos i've got no problem with the other field (type char). But i can't solve it.
Anybody's got an idea?
Thanks

What you are seeing is the normal behavior of a numeric field represented by the SAPgui. This is how all numeric fields are displayed via SAPgui. If you don't want to see the 0, then you just change the field type to CHAR and handle accordingly.
Regards,
Rich Heilman

Enhancement of component ERP_H with a custom field in the Web UI

Hi,
I'm facing an error when enhancing the component ERP_H with a custom field in the web UI.
I've followed the steps mentioned in the pdf document called "Enhancement Options for the Lean Order Interface" (Note
1224179):
I´ve done a enhacement on ERP_H component.
I added a field to the view Headerdetail called "ZZCCTYPE1", but when I set a value in UI, I haven´t read this field in abap code.
The SET method (SET_ZZCCTYPR1) in the context node is ok, in debug I see that the method current->set_property, is working fine.
I've tried to read the atribute with lr_entity->get_property_as_string ( 'ZZCCTYPR1' ), but doesn´t work. When I read other "standard field", the statement is ok and it has value.
When I set the value of the field from ECC (VA01/VA02), it is kept by the system.
Could anybody help me?
Thanks in advance,
Regards,
Andrea Ricci

Hi,
To add a new field, you have to first create it through T-Code EEWB where in you create a project, create extension which is assigned to a business object and create the new field through wizard - specifying the field name , type and length.
Once this is done, you can check the new field coming up in available fields for the relevant component's view in Tcode BSP_WD_CMPWB.
Hope this helps you out.
Cheers
Ravindra Valy
"Award Points if it is helpfull"

Enhancing the component ERP_H with a custom field in the web UI

Hi,
I'm facing an error when enhancing the component ERP_H with a custom field in the web UI.
I've followed the steps mentioned in the pdf document called "Enhancement Options for the Lean Order Interface" (Note
1224179):
I´ve done a enhacement on ERP_H component.
I added a field to the view Headerdetail called "ZZCCTYPE1", but when I set a value in UI, I haven´t read this field in abap code.
The SET method (SET_ZZCCTYPR1) in the context node is ok, in debug I see that the method current->set_property, is working fine.
I've tried to read the atribute with lr_entity->get_property_as_string ( 'ZZCCTYPR1' ), but doesn´t work. When I read other "standard field", the statement is ok and it has value.
When I set the value of the field from ECC (VA01/VA02), it is kept by the system.
Could anybody help me?
Thanks in advance,
Regards,
Andrea Ricci

Hi Pooja,
When you created your custom views, did you bind the view context nodes to the corresponding context nodes of your component controller?
From the exceptions you reported it seems that this binding is missing.
To create this binding, you can right click on your view context node , choose "Create Binding" and bind it to the context nodes of your Component Controller.
Hope this helps.
Regards,
Nisha

Problem with the quantity field

hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsi

what about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Contract - problem with attachements (empty field in LOIO_OBJID)

Hi Guys,
We are using extended classic scenario of SRM 4.0 (SRM Server 500) and our latest support package is SAPKIBKS12. We have the following problem with contracts.
Sometimes when an attachment is added to a contract the system does not fill the following fields in tabel BBP_PDATT.
LOIO_CLASS: Normally filled with BBP_L_DOC
LOIO_OBJID: Normaly filled with a GUID size datastring
Whenever this happens and later on the contract is changed and released the system will raise an abort. We tried the following notes but no good result.
891293,919467,932602,964065. Some other notes that might be possible are 1042826/1085700/1083063 but we also don't have good experience with these ones.
Can anyone give us advice about two things.
1) Is there a way to fill the empty fields in BBP_PDATT so that existing contract will work properly again?
2) Does anyone know why this problem occurs and how to fix it for new contracts?
Hope to hear from you,
Arie

Thankyou for the reply. I have made following changes but still not working. I am creating the inquiry and customer material is not getting populated. Please guide in resolving the issue.
DATA : W_ENQUIRY_ITEM_INX LIKE BAPISDITMX OCCURS 0 WITH HEADER LINE.
W_ENQUIRY_ITEM_INX-ITM_NUMBER = THEAD-ITEMNO.
      W_ENQUIRY_ITEM_INX-UPDATEFLAG = 'X'.
      W_ENQUIRY_ITEM_INX-CUST_MAT22 = 'X'.
APPEND W_ENQUIRY_ITEM_INX.
CALL FUNCTION 'BAPI_INQUIRY_CREATEFROMDATA2'
   EXPORTING
   SALESDOCUMENTIN               =
     INQUIRY_HEADER_IN             = W_ENQUIRY_THEAD
IMPORTING
    SALESDOCUMENT                 = W_NUMBER
   TABLES
    RETURN                        = W_RETURN
    INQUIRY_ITEMS_IN              = W_ENQUIRY_ITEM
    INQUIRY_ITEMS_INX             = W_ENQUIRY_ITEM_INX
     INQUIRY_PARTNERS              = T_INQUIRY_PARTNERS

Problem with Update Text fields in Infoset

Hi experts,
Here i would like to rephrase the question. Normaly while working with Infosets, when press "update text fields" button, those fields having text is updated. But one of my field is not updated. I need some help from you for that.
One more question i've that my field is having check table so i would like to know how exactly the text field is updated.
scenario.
Customized IT9320 has field prt_pos added. This field is having check table T528B. But i want text field to be attached is IT1000-STEXT.
How this can be done, because i suspect that just using check table field IT1000-STEXT is not attached to IT9320-prt_pos.
Please help. I'm really got stuck here.
Thanks a lot,
Toral.
Hi,
I'm working on customised Infotype. I need to add one new customised field ie Present Position. This field has number as well as text associated with it. There is a check table attached with this field so that text can be displayed alongwith number.
I need this field in SAP/Adhoc query. But when i go to SQ02 this fields shows only value. Text is disabled for this field. I'm not sure why is it so.
I looked into other infotype which as one field using same data element, and that field shows both value as well as text. Please help me to rectify this issue for present position field.
Thanks,
Toral.
Edited by: Toral Sheth on Jul 4, 2008 2:01 PM

You would be much better off with one multi-line form field.
There are many problems with trying to determine when one is at the end of the display field with text entry.

Problem with ME_PROCESS_PO_CUST setting fields to update..

I try to add new fields to a purchase order, everything works fine, I added the fields in CI_EKPODB and CI_EKPODBX
also changed structure ZPO_CUST_FIELDS and changed the screen in SAPLZ_PO_CUST_FIELDS
ME_GUI_PO_CUST is implemented ( it already was since we already had custom fields)
in ME_PROCESS_PO_CUST we have FIELDSELECTION_ITEM where I can set if the field needs to be editable or not.
for 1 field that has happenend in the past and the code reads
IF gt_trtyp NE 'A'.           " Transactietype <> Weergeven
    READ TABLE ch_fieldselection ASSIGNING <fs>
         WITH TABLE KEY metafield = mmmfd_cust_10.
    IF sy-subrc EQ 0.
      <fs>-fieldstatus = '.'.     " Veld is wijzigbaar
    ENDIF.
ENDIF.
when I check out the mmmfd_cust_10 I see that it is somehow linked to the old custom field
now I added more custom fields but I can't find there needed mmmfd fields ??
do they need to be generated somehow ? I can't find anything in the documentation or sdn about those fields ?
so the fields are visible in me22n but I have to set them to editable ! if there are more sollutions to this problem I'm glad to hear
kind regards
arthur de smidt

I was under the impression that the mmmf fields were added when new fields were added. seems that you can only use the 10 fields available

Problem in posting Custom fields in Purchase Order using BAPI_PO_CREATE1

Hi friends,
Did any body tried populating custom fields using BAPI_PO_CREATE1?
I am trying to populate custom fields in Header.
I am populating EXTENSIONIN-STRUCTURE with 'BAPI_TE_MEPOHEADER' and EXTENSIONIN-VALUEPART1 with respective values of fields using the code below.
T_CUSTDATA_IN-PROJECT_ID_NUM = '543211'.
T_CUSTDATA_INX-PROJECT_ID_NUM = 'X'.
MOVE 'BAPI_TE_MEPOHEADER' TO T_EXTENSIONIN-STRUCTURE.
*CLEAR T_BAPI_TE_PO_HEADER-PO_NUMBER.
MOVE-CORRESPONDING T_CUSTDATA_IN TO T_BAPI_TE_MEPOHEADER.
MOVE 'T_BAPI_TE_MEPOHEADER' TO T_EXTENSIONIN-VALUEPART1.
APPEND T_EXTENSIONIN.
MOVE 'BAPI_TE_MEPOHEADERX' TO T_EXTENSIONIN-STRUCTURE.
*CLEAR T_BAPI_TE_PO_HEADER-PO_NUMBER.
MOVE-CORRESPONDING T_CUSTDATA_INX TO T_BAPI_TE_MEPOHEADERX.
MOVE 'T_BAPI_TE_MEPOHEADERX' TO T_EXTENSIONIN-VALUEPART1.
APPEND T_EXTENSIONIN.
But still it is not populating the custom fields.
Can some body help me on this?
Thanks & Regards,
Ramesh Kodavati

Hi,
You require to implement the Badi ME_BAPI_PO_CUST
Method MAP2I_EXTENSIONIN or INBOUND
for changing the parameter CH_EXTENSIONIN in method INBOUND
or CH_STRUC in method MAP2I_EXTENSIONIN.
in addition to passing the extensionin parameters in bapi.
implement the above said bapi and put a break point in both of the methods (exactly i don't remember)
and check values are populating in the CH_STRUC structure.
Regards,
Dwaraka.S

Issue with new Custom field value in Material UI (EHP5)

Hi
We added new Custom field (country) in material UI for Routing the WF based on country.
we added this new field in material general data, When user press the "check" button in the header the value disappeared in the UI.
This field value required only in MDG CR level, this field value will not be updated in ECC active area.
Request your inputs to solve this problem.

resolved myself:
PROCESS BEFORE OUTPUT.
*                      Verarbeitung vor der Ausgabe
*MS17092009 Non eliminare modules standard.
MODULE set_propriety.
MODULE INIT_SUB.
MODULE GET_DATEN_SUB.
PROCESS AFTER INPUT.
*                      Verarbeitung nach der Eingabe
MODULE GET_DATEN_SUB.
CHAIN.
      FIELD MARA-ZBARCODE.
ENDCHAIN.
MODULE SET_DATEN_SUB.
FIELD MARA-ZBARCODE MODULE BARCODE_0001 ON INPUT.

Problem with People Picker field in sharepoint 2013 list

hi friends
i have a problem with people picker
default newitem.aspx
custom NewItem.aspx
why the selection option of the people piker is changing
how can i get the default functionality in custom page
please help me

Hello malli.share,
try to copy source code from newitem.aspx to custom_newitem.aspx (in SPD you can edit custom_newitem.aspx in advanced mode and paste the code).
Regards,
Alexander

Problem with non currency field calculations to become curr

Hi guys,
Is there a problem if I have a QUAN field and DEC field forming to become a CURR field? I mean a have this computation below:
v_var1 = v_var2 * v_var3.
where v_var1 type QUAN, v_var2 type DEC and v_var3 type CURR...
would it incur any problem with the calculations?
Thanks!

Hi,
Did you try ?
Worked for me flawlessly
tables bseg.
parameters : qty like bseg-menge,
amt like bseg-dmbtr.
data : result like bseg-dmbtr.
result = qty * amt.
write result.
The only issue is that the result will be rounded upto 2 decimals.
But if you declare result as
data : result(13) type p decimals 3.
Then there will be no issues.
regards,
Advait
Edited by: Advait Gode on Oct 3, 2008 3:59 PM

Problem with EMDP0001 customer field es60

Similar Messages

Maybe you are looking for