Problem with „Empty-File Handling" in PI 7.11
Hi,
Iu2019m working in PI 7.11 with file adapter, Sender CC, option: Empty-File Handling: Process Empty Files.
What I want to do is giving target file the system-date, if the source file is empty.
But I always get a mapping error in RTWB: Premature end of file.
It seems that the payload is empty.
Any idea?
Thanks a lot in advance!
Rene Dong
Edited by: Rene Dong on Aug 31, 2010 4:20 PM
What I want to do is giving target file the system-date, if the source file is empty.
The error you are getting makes sense. You should do a check in the mapping, if the payload is empty then use brute force to pass the system date.
Similar Messages
-
Problem with .sitx files (Safari but not Firefox???)
Hi All,
I have a website online (with help from iWeb and BBEdit) but am having a problem I cant figure out (this IS my first website!)
I am hoping that someone much more knowledgeable than me can help me with it.
I basically have a download section. Icons and desktops.
Now, when I (or anyone else) tries to download- everything seems to be fine in FireFox (even IE!) but not in Safari.
My desktops are compressed as .zip files. No problems there, everyone can download and open (including Safari users!)
My icons are compressed as .sitx files. This is where the problems come in. Firefox and IE download them no problem ('save to disk?' etc) However when one attempts to download the icons (.sitx files) with Safari it simply displays pages of gibberish (starting with the word 'Stuffit') which I am presuming is Safari trying to 'display' the contents of the actual stuffit file.
Why is this? Why wont safari simply download the .sitx files as it does .zip files?
Does Safari have some sort of inherent problem with .sitx files? Is it some sort of configuration within Safari preferences? or (and probably most likely!) is it something I have done wrong?
Oh, my website (page in question!) can be found here:
http://aoimedia.co.uk/news/news.html
Thanks in advance for all your valuable help
Kind regards
John
12 G4 Powerbook/Superdrive. (she's named Skates!) Mac OS X (10.4.4)Hi,
It sounds like the server the website/file is hosted on is not identifying the type correctly. As you've seen, different browsers will handle this situation differently.
Have a read of this article:
http://www.macosxhints.com/article.php?story=20040211102018600
Hope that helps. -
Create a message with empty file in Service pack 9
Hello.
I have the Service pack 9, and when PI read an emtpy file delete it inmediately.
Is there any way to create the message with an empty file? How?
Thank you.Look into empty file handling in the file adapter. Below is from the sap help documentation for the file adapter.
Sender File adapter
Handling of Empty Files
Specify how empty files (length 0 bytes) are to be handled.
u25CB Do Not Create Message
No XI messages are created from empty files.
The files are processed according to the selected Processing Mode.
For example, if the processing mode is Delete, empty files are deleted in the source directory.
u25CB Process Empty Files
XI messages are created with an empty main payload.
The files are processed according to the selected Processing Mode.
u25CB Skip Empty Files
No XI messages are created from empty files.
Empty files are skipped and remain in the source directory.
Receiver File adapter
Select the Handling of Empty Messages:
u25CB Write Empty File
An empty file (length 0 bytes) is put in the target directory.
u25CB Ignore
No file is put in the target directory. -
Problem with Offline Files with Cisco NSS322 (firmware 1.3)
Hi
We've recently bought a new NSS322 NAS box to replace an ageing Windows SBS 2003 file server. We've upgraded the firmware to 1.3, and begun moving files across from the Windows server to the new NAS box. However, we're having a problem with Offline Files on the NAS, as attempting to make directories available offline on Windows clients (only tried Vista Business 32-bit so far) we get loads of errors stating that these files cannot be made available offline "because they are in use" (or something like that).
Any suggestions as to why this might be? It doesn't appear to affect all files, but most of them.
I've read somewhere that the "allow oplocks" setting can affect this if disabled, but it is already enabled on the device, so this can't be the cause of the problem.
Any help you could provide would be much appreciated, as at the moment this issue is rendering our NAS unusable as we rely heavily on the offline files functionality.
Thanks in advance.
I have some more information - this appears to be related to the ownership permissions of the files on the NAS. New files created on the NAS can be made available offline, and have the ownership of the person who created the file, however, the files we moved across from the server are all listed as being owned by the user "guest" (I think this may be related to the fact that when we moved the files over, the user was logged in as "admin" rather than a user on the AD Domain). I should be able to resolve this through changing the owner of the files on the NAS, but I can't seem to do this, as I get an "access denied" error each time I try to change ownership.
Message was edited by: redcitrus
Is there any chance someone's going to be able to help me with this? I've currently spent £500 on a box that I can't use. If it can't handle Offline Files satisfactorily, it's no use to us.
I've been looking at this a bit more - if appears that each user can make files they have created available offline, but files created by other people cannot - the error message that appears is: "The process cannot access the file because it is being used by another process".
I'm getting desperate here...can anyone help?
Message was edited by: redcitrusSorry, but I don1 speak very good english..
I was Try this quick test: As a quick test, you can do a forward all and make sure you can get into the ftp server.
but result it is to same.
I think, that problem is in firmware, becasue I know more people who own this router with to same firmware version (2.0.1.3), and have they to same problem how I.
I have DISABLED FIREWALL on my router and problem hold over.
If I replace router Cisco Linksys WRVS4400N by Ovislink router or any other, issue (problem) already no is.
Configuration in Cisco Linksys WRVS4400N and configurations in any other router is to same, but FTP connection via Cisco Lynksys always will crash.
If I connect to any other FTP server, sometimes requieres from me ftp login and password. It is OK, but if I assign login and password, after connect me to this FTP server, i see folders and files on this server, but without reason connecting fall down.
Few seconds later if I connect to the to same FTP server, sometime either not request login and password and connection fall down. -
JME Socket File Transfer - Problem with writing file
Hi everybody, i'm trying to code a P2P app for a school project and i have a problem when trying to write to a file.
This method recieves a file form a Socket Server computer that tries to send me a file to the mobile client.
The method recieves the IP adress (String add) and the port of the server.
Also, i would like to know about the buffer(byte) size.
This codes runs well in emulation, but it doesn`t write to a file.
And the main problem is:
"When i run this in the mobile, the file is created in the cellphone memory with a size of 0kb."
The server code was tested with a computer client and recieved the file succesfully.
The server recieves de socket connection form the cellphone without problem.
public void recibirArch(String add, int port) throws Exception {
try
recibArch.setText("Espere por favor...");
long start = System.currentTimeMillis();
int bytesRead;
int pasos = 12;
int current =0;
SocketConnection sock = (SocketConnection)Connector.open("socket://"+add+":"+port);
byte [] mybytearray = new byte [1024];
InputStream is = sock.openInputStream();
FileConnection fc = (FileConnection) Connector.open("file:///"+saveRoot+"5letras.txt",Connector.READ_WRITE );
if( !fc.exists() ){
fc.create();
} else
fc.truncate(0);
DataOutputStream fos = new DataOutputStream(sock.openOutputStream());
bytesRead = is.read(mybytearray,0,mybytearray.length);
current = bytesRead;
while ((current = is.read(mybytearray)) != -1)
fos.write(mybytearray, 0, current);
fos.flush();
current+=bytesRead;
long end = System.currentTimeMillis();
fos.close();
sock.close()
catch(Exception err)
String error = "ERROR: " + err.toString() + "\nDescripción: "+ err.getMessage();
System.out.println(error);
txtLog.setString(error);
Edited by: xtylo on Sep 30, 2008 10:56 AMThank you Tunde for looking at my issues!
The file size is not an issue here. We tested with empty files or files with smaller than 1KB sizes. They all showed problem. The frequency of file transfer shouldn't be a problem either. Through some user interaction on front panel, a couple of files will be transferred. That's basically how often the file transfer occurs.
Interestingly enough, I replaced the copy.vi with a subvi I created using DOS command with System Exec.vi and the issue of copying files went away. My co-worker tested on both XP machine and Windows 7 machine. The DOS command worked fine thru Lavview's System Exec.vi. I think I can take that as a work-around if we can't figured out why copy.vi wouldn't work. Still, it would be nice to know why it doesn't work.
Now I'm still facing some issues with the usage of Check If File or Folder exist.vi. Sometimes it can detect the existing files and sometimes it doesn't.
Thanks very much! -
[help needed] Javadoc problem with many files
Hi,
I have an Ant script generating my javadoc every night. I have about 5700 java files making about 42MB of data.
It worked fine for two years until two weeks ago, where the script stopped with the following message :
<<
[... big snip...]
[javadoc] C:\Temp\Java\blablabla.java:58: cannot resolve symbol
[...snip...]
[javadoc] public HtmlComponent getCell(
[javadoc] ^
[javadoc] 100 errors
[javadoc] 1 warning
BUILD SUCCESSFUL
Total time: 1 minute 40 seconds
>>
If I execute the javadoc generation on a smaller set of java source files, I still have a lot (100 displayed) of error messages like the one above (which generaly don't stop javadoc), but the generation continues :
<<
[...big snip...]
[javadoc] C:\Temp\Java\xxx.java:12: cannot resolve symbol
[...snip...]
[javadoc] public SelectionNoop(Fig fig) {
[javadoc] ^
[javadoc] Standard Doclet version 1.4.2_08
[javadoc] Generating C:\temp\JavadocNewSI\constant-values.html...
[javadoc] Building tree for all the packages and classes...
[javadoc] Generating C:\temp\JavadocNewSI\com\zz\common\job\common\class-use\ManagerDelegate.html...
[...big snip...]
[javadoc] Generating C:\temp\JavadocNewSI\stylesheet.css...
[javadoc] 6251 warnings
BUILD SUCCESSFUL
Total time: 23 minutes 33 seconds
>>
I don't understand what's going on. It is not a memory problem since it issues an intelligible message.
I also managed to generate javadoc for several subsets, so it can't be a problem with one file or folder crashing javadoc.
Any help welcome,
TugWell, it seems that the cause was indeed an empty java file...
The generation fails if the empty java file is the set AND a refering file is in the set. If only one of these conditions are missing, then javadoc goes on...
What I don't understand is that the empty file used to be here since may 2005 and the referring class is unchanged since 2004... it never bugged javadoc before.
Creepy...
Tug -
Problems with .ARW files and auto toning
problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the helpsorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place. -
Problems with compressing files with right hand click. it does not work.
Problems with compressing files with right hand click.
I am using the compress function in the Mac OS (File > Compress XX) from time to time. Today it does not work anymore. OS 10.5.6
I get a message: The content list cannot be created for compressing.
I tried it with files and folders and keep getting this message. Anybody any idea as to how to fix thisThanks I love my macbook!!!!
I also got further problems such as copy-paste not working etc.
so I fixed it just this morning by running Applejack 1.5 and am back up running noticing your post.
thanks for helping though! -
Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
Button=new JButton(Upload);
Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
int returnVal = fc.showOpenDialog(ActionDemo4.this);
if (returnVal == JFileChooser.APPROVE_OPTION) {
File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
textArea3.append(aa);
textArea2.append("Local URL:");
long l=file.length();
try
byte buff[]=new byte[(int)file.length()];
InputStream fileIn=new FileInputStream(aa);
int i=fileIn.read(buff);
String conffile=new String(buff);
String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
urlConn = url.openConnection();
urlConn.setDoInput (true);
urlConn.setDoOutput (true);
urlConn.setUseCaches (false);
urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
BikashThe errors are here:
byte buff[]=new byte[(int)file.length()];
InputStream fileIn=new FileInputStream(aa);
int i=fileIn.read(buff);
String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ...... -
What is the exact problem with this file?
Hi all,
There is an old form , which was not in use from many days.
Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
The login button has the following code:
DECLARE
UNAME VARCHAR2(30);
--USER_ID PARAMLIST;
V_USER APUSERMA.USER_NAME%TYPE;
V_PASSWED APUSERMA.USER_PASSWD%TYPE;
BEGIN
select user_CD INTO :GLOBAL.USER_ID from apuserma
where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
:global.compname := :compname;
compnm(:compname);
--USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
exception
when no_data_found then
MESSAGE('Incorrect Username or Password. Please Re-Enter');
message(' ');
RAISE FORM_TRIGGER_FAILURE;
END;
EXIT_FORM;
When i tried to compile, i got error saying ,
Error 201 at line 10, column 28
identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
I am not getting to know What is the exact problem with this file?
Help me with this please.
Thank You.
Oracle forms builder 6i.
Oracle 9i.Vijetha wrote:
I also want to know what is the use of win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
What does it do??
If i comment the following line , will it be a problem??
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
Because i commented the above line & compiled, so it is not giving any error now.
So please tell me what win_api_environment.read_registry does??
it's read windows registry value. So, no problem if you comment it.
Thanks -
Problem with Receiver File adapter
Hi
I have a problem with receiver file FTP adapter, while writting file in target folder, connection is failing, after retries, it writting file again. How to avoid this situation, is there any way to write the leftout part in the file.
VSHi
Thank u all, Problem is solved, i changed write mode to Over write existing file. It is working fine.
VS -
Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem
Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy -
Problem with import file type setting
Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?
-
Problem with URL File download
Hi every one i am facing a problem with URL File read Technique
import java.awt.Color;
import java.io.DataOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.net.URL;
import java.net.URLConnection;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JProgressBar;
public class JarDownloader
boolean isSuccess = false;
public JarDownloader(String url)
downloadJar(url);
public boolean isDownloadingSuccess()
return isSuccess;
private File deleteExistingFile(String filename)
File jarf = new File(filename);
if(jarf.exists())
jarf.delete();
return jarf;
public static void main(String args[]){
new JarDownloader("url/filename.extension");
private void downloadJar(String url)
try
URL jarurl = new URL(url);
URLConnection urlc = jarurl.openConnection();
urlc.setUseCaches(false);
urlc.setDefaultUseCaches(false);
InputStream inst = urlc.getInputStream();
int totlength = urlc.getContentLength();
System.out.println("Total length "+totlength);
// If the size is less than 10 kb that means the linkis wrong
if(totlength<=10*1024)throw new Exception("Wrong Link");
JFrame jw =new JFrame("Livehelp-Download");
JPanel jp =new JPanel();
jp.setLayout(null);
JLabel jl = new JLabel("Downloading required file(s)...",JLabel.CENTER);
jl.setBounds(10,10,200,50);
jp.add(jl);
JProgressBar jpbar = new JProgressBar(0,totlength);
jpbar.setBorderPainted(true);
jpbar.setStringPainted(true);
jpbar.setBounds(10,70,200,30);
jpbar.setBackground(Color.BLUE);
jp.add(jpbar);
jw.setContentPane(jp);
jw.pack();
jw.setResizable(false);
jw.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
jw.setLocationRelativeTo(null);
jw.setSize(220,150);
jw.setVisible(true);
int readlngth=0;
int position=0;
byte[] readbytes = new byte[totlength];
while(totlength-position > 0)
readlngth = inst.read(readbytes,position,totlength-position);
position+=readlngth;
jpbar.setValue(position);
File jarf = deleteExistingFile(filename);
jarf.createNewFile();
//FileWriter fwriter=new FileWriter(jarf,true);
FileOutputStream fout = new FileOutputStream(jarf,true);
DataOutputStream dout = new DataOutputStream(fout);
dout.write(readbytes);
dout.flush();
dout.close();
inst.close();
jw.setVisible(false);
jw.dispose();
isSuccess=true;
}catch(Exception ex)
isSuccess=false;
}From the above code i received the total length of the PAGE content (i.e here url is a file) when i tried to find the size of that file it return -1.
please help meI think the real problem is that you don't check the return value from read (it's probably less than data.length indicating an incomplete read). Isn't there a readFully somewhere?
-
Empty File Handling in xLink adapter
Helloo Experts
I am doing a scenario, which creates an empty file(when some mapping condition doesnt satisfy).
I dont want to write this empty file in the target directory.
This can be handled if a file adapter is used, but I am using a SOAP AXIS adapter, so I dont know how to handle this here.
I alaso tried using the StrictXml2PlainBean to avoid the creation, it creates 0 documents and a 0kb empty file.
Can anyone please let me know how this can be solved????
Also if some one has done this empty file handling in J2SE file adapter...can you tell how it was done.
Thanks a lot!!!!!!
Regards
ShobhaHi Gabriel,
You can write a simple script to copy a file from source folder to target in case the fiel size is ZERO bytes. The script will not copy the file if the filesize is more than zero bytes, This will be processed normally by PI server. You can call the script from sender communication channel parameter : "RUN OS command before message processing". Could you please specify the Operating System (OS) you are using in your PI server.
Regards
Anupam
Maybe you are looking for
-
Hi, My client wants to test inetgration scenario's between newly installed ECC server and old XI server. Please know that both the systems are on different servers and the SLD entries in XI correspond to the old ECC server. Is it possible that we can
-
Dependency injection nightmare
I can't get it what is wrong...given this faces-config.xml <faces-config xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.c
-
Preparedstatement - please test this code!!
I hope someone can test this code and tell me if it works. It seems to work on my computers (win98 and win2000, and access 2002 database, compiling etc,and even returns that it updated 1 record. But the database is unchanged. Commit is default to aut
-
Wie kann ich das update von photoshop 2014 herunter laden.
wenn ich auf Aktualisieren klicke, erscheint die Melgung, das Programm sei aktuell. Es handelt sich aber nicht um die aktuelle Version photoshop 2014
-
hey there! well i from india and i m facing problem connecting my debit card to the itune store ,as the very option is not there, can someone guide me how to get it connected , i have a mastercard debit card with me .please help me