Problem with enabling Web Services on LaserJet Pro MFP M127fw

12:25 AM
I have a problem with enabling the HP Web Services. When I push the application button on the printer, the monitor shows "connecting..." and then nothing is happen or an error apear thet my device could not connect to servers. I can't print information sheet on web services panel to get the claim code and add my device in www.hpconnected.com . My device is connected to the internet with no problem by a wireless Dlink Router. I also changed my device IP from 192.168.1.11 to 192.168.1.55 manually, and I change Preferred DNS Address to 8.8.8.8 and Alternate DNS Address to 8.8.4.4 and nothings happen. I can see the menu but I can not enable the HP Web Services in there. no proxy. no firewall. I do not know what can I do for solveing this problem. Please help me.

Hi @AlirezaP
Welcome to the HP Support Forums. I gather that you are getting a connection error message when trying to enable the web services for your Laserjet Pro M172fw printer.
As you have already tried setting the manual IP address and manual DNS servers, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

LaserJet Pro MFP M127fw, Can't Enable Web Printing

I have tried using the machine to enable web printing as well as using the computer and typing in ip address. No matter which way I go I cannot enable web printing on my laserjet pro mfp m127fw. I am connected to the net. Can access the internet on other devices. So there should be no issues there. Is something wrong with the machine or is there something I can try? Of course we are NOW ready to start using this feature after having the machine for a while so I hope there is not something wrong with the machine.
Thank you!
This question was solved.
View Solution.

Hi @mdandy,
Welcome to the HP Support Forums. I see that you are getting a connection error message when trying to enable the web services for your Laserjet M127fw printer.
Please ensure the printer is up-to-date with its firmware. If you are unsure how to check I have included the Getting the Latest Firmware and Product Updates document to assist you.
Once you are up-to-date with the firmware, please set a manual IP address and manual DNS servers for the printer. The steps on how to set a manual IP address can be found in the Printer Does Not Maintain Wireless Connection document. For the DNS servers please use 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Alternate DNS server. These are Google’s public DNS servers.
Please let me know how things go.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Problem with RESTful web service

I am running into a problem with Flex Web Services (REST) in trying to get the proper format returned. I can see that the HTTP header is set to
Accept: */*;
rather than
Accept: application/xml
when sending the request. The web service was generated via the web services HTTP data services wizard. I edited it to set the resultFormat to xml
    // Constructor
    public function _Super_UsersService()
        // initialize service control
        _serviceControl = new mx.rpc.http.HTTPMultiService();
         var operations:Array = new Array();
         var operation:mx.rpc.http.Operation;
         var argsArray:Array;
         operation = new mx.rpc.http.Operation(null, "getUsers");
         operation.url = "http://localhost:8888/users";
         operation.contentType = "";
         operation.method = "GET";
         operation.resultFormat = "xml";
         //operation.serializationFilter = serializer0;
         operation.properties = new Object();
         operation.properties["xPath"] = "/";
         operation.resultType = valueObjects.Users;
         operations.push(operation);
         _serviceControl.operationList = operations;
         model_internal::initialize();
How does one configure the accept header?

Hi,
I have posted a simple application with the RESTful reference:
http://apex.oracle.com/pls/apex/f?p=13758
I can give you full privileges on this so you can look at the WEB service reference. Shall I send to you separately for login user?
It is using the RESTful service: http://apex.oracle.com/pls/apex/nd_pat_miller/demo/employee/{deptno}
This RESTful service tests fine when I test from within the RESTful web service module of the Workspace.
I based this on the Video demo tutorial for RESTful web service that Oracle published for 4.2 release. The video seemed to exclude the {deptno} in the URL but when I try that, it doesn't work either.
This is the error I am getting when I run this on my Apex environment: (it, of course, will not run the web service in the apex.oracle.com environment)
class="statusMessage">Bad Request</span>
</h3>
</div>
</div>
<div id="xWhiteContentContainer" class="xContentWide">
<div class="xWhiteContent">
<div class="errorPage">
<p>
<ul class="reasons"><li class="badRequestReason"><span class="target" style="display:none;">uri</span><span class="reason">Request path contains unbound parameters: deptno</span></li>
</ul>Thanks,
Pat
Edited by: patfmnd on May 8, 2013 3:33 AM

HP LaserJet Pro MFP M127fw installer stopped working

Have dificulty installing HP LaserJet Pro MFP M127fw drivers on hp 32bit laptop with windows 7
Build in printer software stops halfway
Downloaded software stops halfway
Standard windows 7 printer driver works fine and can print with it, but has no scanner driver
HP printer scanner doctor indicates scan software is not installed and directs me to driver download on hp website
installation of this software stops also halfway
No errorcodes anywhere, just message box installer could not continue and trying to find a solution. That box diapears as well.
Installation fails on both wired network and usb
no errormessages in windows logbooks
The http connection works fine
tried installation with smart install on and off (is off at the moment)
Spooler service is running fine
Searched this forum and more people seem to have this problem but there is no solution mentioned in the end.
Please help
This question was solved.
View Solution.

Hi @Lize2 ,
I see that you are having issues installing the printer, the installer stops working. Thanks for providing that detailed information. I would like to help you out today.
It sounds like something is blocking the software from installing, since just the driver are being installed.
Disconnect the USB cable, run the uninstall from the CD.
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
Do a msconfig to turn off any startup programs that might be interfering with the installation.
Click on Start, in the search box type in Run, enter, then type in Msconfig, click OK.
Click the Services tab. Click to select the Hide All Microsoft Services check box. Click Disable All, and then click OK.
Then click on the Start Up tab at the top. Click on disable all.
Reboot the computer.
Temporarily turn off any Antivirus software and Real Time Scanning. Especially if you are using Mcafee.
Then run the installation again. Right click on the install and select Run as Administrator.
Test the printer again.
Then go back into msconfig and Enable the All Microsoft Services and Enable All on the Start Up tab. Turn the Antivirus software back on again and the Real Time Scanning.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet Pro MFP M127fw ePrint failures

We bought this printer several months ago. My boss wanted a printer that could be printed to remotely. I advised him to get one of the many Google Cloud Print ready printers out on the market, but the salesman at where ever he purchased this printer, told him the LaserJet Pro MFP M127fw was Google Cloud Print ready and that it also offered this amazing feature called HP ePrint. The salesman was only half wrong. Technically any printer is google cloud ready (at least in this braindead of a salesman's standards), as you just need to have it connected to a PC. However, any notion that this printer is an ePrint printer is an outright lie.
So that I don't get bombarded with the normal responses from the "HP Experts," let me list all of the steps I've done:
First, few days I dealt with customer support. Yes, dealt, as they were rude and ultimately had no information. Even after the ticket got "escalated," the advanced tech support still had little to add. I followed all of the steps for troubleshooting on the support pages as well as the forums. I've changed to static ip's, google dns servers, power cycled all the devices, did a full printer system restore to bring it back to "out of the box" shape in terms of settings/firmware, tried wired/wireless/usb connections, changed routers, opened ports, disabled and reenabled web services, tried all of the above through the browser with direct ip settings prompts, updated firmware, and I'm sure countless other steps that I honestly don't even want to remember.
I was told the web services e-mail given contains the claim code needed for www.hpconnected.com. When inserting it as required when adding a device, you'll get Unexpected Error unless it's feeling frisky, and then it gives the Invalid Claim Code prompt. Let's not forget that when I originally signed up, it was hpeprint.com, and when signing in, they took you on the wonderful whirlwind of a redirects from it to hpconnected and back, never getting past the sign in process.
Eventually, I put this printer far far away from me. Flash forward several months, and I've done all of the above and then some on top of updating to the latest firmware (which I had hoped would solve this issue finally). Nothing.
When enabling web services, no information page is printed. When trying to manually do so, we just sit and spin on the Connecting... screen on the LCD. If I try to do anything related to the web services features, I get the same result, except in the lovely times it changes to Unable to connect to server.. etc.
Outside of the ePrint issues, this device is really nice. But it is in no shape or form, an ePrint printer. Fact is, if I wanted this printer without the ePrint functions, I could have saved money I'm sure.
While searching today for possible new solutions on the forums, I see the following thread:
Eprint on HP LaserJet Pro M127fw
An "HP Expert" advises this kid to use google cloud print, which although comical, is enraging. This device has, and still is, being marketed as an HP ePrint featured printer. You can see on the official HP website it's listed:
HP LaserJet Pro MFP M127fw
or see the picture below. But as this other HP webpage shows, this printer is not listed as having these features:
HP Web-Connected Printers
If anyone has any useful advice, or can get me in touch with the Experts of all "HP Experts," I would love you to my dying breath. But more than anything, I really just want to know if this printer has, or ever will, have these features available. Because having it promoted on the boxes, in stores, on the websites, even having the LCD show settings for these features is nothing less than infuriating.

Hi sunrotor,
Welcome to the HP Support Forums. I see that you have had some issues with setting up the ePrint feature of your Laserjet Pro MFP M127fw printer.
Thank you for the very detailed post of things that you have tried. I had a customer who was able to connect with the ePrint servers when using a Level 3 Communications DNS server when trying to connect with their Laserjet Pro M125nw printer. I have included About.com’s list of Free & Public DNS Servers which the Level3 is the first one listed. Please try setting a manual IP address and manual DNS server for the printer using the Level3 servers instead of the public Google DNS servers.
I have also included a post by @VisionAiry that lists all the Incoming and Outgoing Printer Ports. Please ensure that the ports are available for using ePrint.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP LaserJet Pro MFP M127fw will not print anything except its own config

Just purchased a HP LaserJet Pro MFP M127fw. I cannot manage to get it to print using any type of connection to the printer.
I can connect to the printer from my Ubuntu PC and my Android phone, but when I attempt to print, the job just hangs, never erroring, but never completing. I have attempted printing from various applications, including a test page from the HPLIP tools, but the jobs reports "processing".
When I attempt to print an information sheet from the printer's front panel, it asks me to confirm, but then nothing happens.
I can connect to the printer's web server, but clicking on the print info button there does nothing.
I have successfully connected with HP's ePrint service using the printer's reported email address, but the service reports "problem with printer".
I don't know what else to try here.
This question was solved.
View Solution.

Hi richRemer,
I see that you are having issues printing from the computer and the Android phone.
I will be happy to help you.
Power cycle the computer and the router.
I would do a power reset on the printer. With the printer still turned on, disconnect the power cable from the back of the printer. Then disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
Print a hardware self test. Find out what the IP address is.
Printing a Configuration Report.
I have provided you with the Driver Support for Linux OS.
If you are still having issues please go to Linux support page.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can't receive fax LaserJet Pro MFP M127fw

While I can send faxes on my LaserJet Pro MFP M127fw, I can't receive them. I've downloaded the newest software & drivers, and the LaserJet Firmware Update utility, and run the fax test, with the report indicating it passed.

Hello @V122,
I'm sorry to hear that the reset made no difference.
Because your fax machine will manually answer faxes we know that the fax modem in your printer is functioning properly. In saying that, I did a bit more research into the Fios phone line that you're using and I do believe that your issue lies with your digital fiber-optic phone line.
Faxing is old analog technology. Nowadays many phone providers offer digital phone lines (like your Fios line). These digital phone lines should work OK with your fax machine. However, there is a lot more static noise and interference on those digital phone lines that cause fax receiving issues. Because your fax can manually answer we know, as I previously stated, that the fax modem is functioning. However, the fax signal isn't strong enough (probably due to digital interference) to prompt your machine to wake up and automatically answer the fax. Simply stated, your machine does not detect a fax coming through.
According the the User Guide for your printer: "HP products are designed specifically for use with analog phone services." Source: User Guide: Page 110 (120-128)
Because Fios operates like Voip (Digital internet based phone line) we could try to lower your Fax Speed to Slow on your printer to give your fax machine more time to 'listen' and 'connect' as the digital signals transfer much faster than analog signals.
How to Lower Fax Speed:
Select the Setup button on your printer
Right arrow to Fax Setup
Right arrow to Advanced Fax Setup
Select Fax Speed and alter this to Slow
Once the Fax Speed has been changed to slow, please try to receive a fax automatically again to see how your printer responds.
Please let me know if the Fax Speed adjustment resolves your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

LaserJet Pro MFP M127fw will not go to sleep

I just bought a LaserJet Pro MFP M127fw. Through the LCD Control Panel I set it up to go to sleep after 5 minutes. It will not go to sleep, the LCD panel is always on. I did the following from the LCD panel: Setup Menu >>System Setup >> Energy Settings >> Sleep/Auto Off after >> 5 Minutes Printer is connected via wireless. I'm using this printer on a Mac OSX 10.9 (Mavericks) and have installed the latest driver software from HP Support website. Anyone has noticed this problem and is there a solution to it? Thanks.

Hi tuanomsoc, I hope you had a good weekend!
The printer has a built-in surge protector, so by plugging into a surge protector or a power bar, it can cause power drains that affect the functionality. I would recommend the post below by , who has provided a helpful write-up on this exact question: Power Supply Related Issues Please let me know if you have any questions. Thanks for posting on the HP Forums!

HP LaserJet Pro MFP M127fw Does not recognise new toner cartridge

HP LaserJet Pro MFP M127fw - error message to install new cartridge
After printing a ream of paper, we got an error message to install a new toner cartridge. We couldn't overwrite it and continue to print. Installed a new HP toner cartridge and still get the same error message to install a new cartridge. I've done a hard reset already with no change. Will take any help I can get. This is the first toner cartridge change for this printer.

Hi @kdaniels79 ,
I see that you are experiencing issues with the toner not being recognised. I will certainly do my best to help you.
I have provided a document with steps for replacing the toner. Make sure all the orange packing material is removed and the sealing tape. Make sure a piece of paper didn't slide in part way from the paper tray, blocking any sensors.
Replace the Toner Cartridge.
Are you using Genuine HP Toner?
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet Pro MFP M127fw Scanner Jam - 2 printers now

I purchased a LaserJet Pro MFP M127fw earlier this year (February timeframe). Within a couple of months, the scanner feeder was pretty much always jamming at the second page. It eventually got to the point where it would jam at the first page. Prior to this, I had had no problems.
Because he expressed interest in it, I gave that printer to a friend. In April, I purchased the same brand of printer from the same store. All was well until several days ago when the scanner feeder started to jam on this printer - initially when the third page was being fed, and now the printer is doing it at the second page.
Both printers are connect via USB. My laptop is running Windows 8.1.
I've uninstalled and re-installed the drivers/software. I've attempted to run the HP Print and Scan Doctor but it repeatedly gets hung up and I have to close it from the Task Manager.
I called the store from which I bought the two printers and they suggested it might be a manufacturer defect.
Thoughts as to what may be happening?

Hello BFB101,
Welcome to the HP Forums!
I understand two Laserjet MFP M127fw that you bought, receive a paper jam in the automatic document feeder. I will do my best to assist you! Please make sure this printer is plugged into a direct wall, not a surge protector. I just want to see if this makes a difference.
I would follow this HP document on 'Original Jam: Clear jam, and then press OK' Message Displays on the All-in-One. Make sure there is no paper within the automatic document feeder since you keep experiencing this problem.
Try performing a hard reset on your printer for more than 60 seconds. Leave the printer turned on> Disconnect the power cord from the back of the printer.
The last step you can try is updating the Firmware on your printer. I will provide the HP website where this download is located here. Please choose your correct operating system.
If you're experiencing the same problem, then you will have to contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
Good luck.
I worked on behalf of HP.

HP LaserJet Pro MFP M127fw Direct Scanning

Please provide me support how can I scan document to network folder by using touch key pad on this HP LaserJet Pro MFP M127fw device. I found only 3 options, copy , fax , application. There is no option to add scan to pc or scan to network. Is this possible to add this option in touch screen ? Thanks.

Hi @HP-Mtn ,
I see by your post that you want to know if the printer can scan to a network folder from the display. I would like to help.
This model doesn't have the option to scan from the printer directly or to a network folder.
You will have to install the printer software on the computer to be able to scan.
I have provided a document for how to scan through the HP software.
Just select your operating system from the list. Scan.
If there is anything else that I can help you with just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to upgrade firmware on LaserJet Pro MFP M127fw - HP Device Update cannot proceed

I just bought a new LaserJet Pro MFP M127fw and was trying to upgrade the firmware to the latest one posted on the support website of HP and the error I keep gettin is HP Device Update cannot proceed. Below is a screenshot
Everything is plugged in and I don't have any errors on the printer. Please help.

Hi @EddieTr ,
I see you're experiencing issues updating the printer's firmware. I would like to help you resolve this issue.
Power cycle the printer.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Print a Configuration Report to see which firmware version you have now. The latest Version is 20140129.
Printing a Configuration Report.
Connect the USB cable from the printer directly to the computer and run the firmware update again, if your version is older. (don't use a USB hub or Dock)
Be sure to select the newly created print queue for the USB connection while using the tool.
Please call our technical support at 800-474-6836 if the issue persists. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to Remove & Re-Enable Web Services on LaserJet printers supporting ePrint

If your LaserJet printer has been disconnected from or failed to connect to Web Services, you may need to power cycle your printer to reconnect. If that does not resolve the problem, you can remove web services, wait 30 seconds, then re-enable web services to re-establish your connection to ePrint and Print Apps. Note: this last step will result in a new email address being assigned to your printer.
How do I remove HP Web Services for my LaserJet printer?
Print a configuration page from your product, and locate the IP address.
At your computer, open a Web browser and type the product IP address into the address line and press Enter. The HP Embedded Web Server opens.
Click the HP Web Services tab.
Select the option to disable Web Services.
How do I enable or re-enable HP Web Services for my LaserJet printer?
To use HP ePrint, you must first enable HP Web Services. Re-Enabling Web Services uses the same procedure as enabling the Web Services.
Print a configuration page from your product, and locate the IP address.
At your computer, open a Web browser and type the product IP address into the address line and press Enter. The HP Embedded Web Server opens.
Click the HP Web Services tab.
Select the option to enable Web Services.
When Web Services are enabled, ePrint information appears in the HP Embedded Web Server. Look for the e-mail address that is automatically assigned to the product. The product also prints an HP Web Services information sheet that contains this e-mail address and instructions
If you were unable to register your printer in www.hpeprintcenter.com within 24 hours of printing your information sheet, you must re-enable the printer code by reprinting your information sheet. The information sheet will also provide your email address if you have forgotten it.
How do I print the Web Services Information Sheet for my LaserJet printer?
You can only add the printer to your HP ePrintCenter account within 24 hours after printing the information sheet. You can re-print the information sheet at any time from the printer control panel.
Print a configuration page from your product, and locate the IP address.
At your computer, open a Web browser and type the product IP address into the address line. The HP Embedded Web Server opens.
Click the HP Web Services tab.
Click the Print Information Sheet button.
I am an HP employee.

To help improve the organization and information sharing in this forum this post/discussion has been closed and replaced.
Please see this post: <link to new “Enable Disable Web Services on your printer” post.
If after reviewing the post above you still have questions/issues with your web-connected printer, you can either review and comment in existing posts in this forum that report issues like yours, or if necessary start a new post requesting assistance.
Miles
HP Employee

Problem with CFMX web service function return

I made a post yesterday about a web service function I was
writing, as it turns out my post was extremly incorrect for my
problem. With this web service function I can return an array just
fine, I can return one instance of an object just fine, however,
when I try to return an array of the object I keep getting the
error:
Could not perform web service invocation "SelectGames"
because AxisFault faultCode: {
http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode: faultString: [org.apache.axis.AxisFault : ; nested
exception is: coldfusion.xml.rpc.CFCInvocationException:
[java.lang.IncompatibleClassChangeError : Dependent CFC type(s)
have been modified. Please refresh your web service client.]];
nested exception is: coldfusion.xml.rpc.CFCInvocationException:
[org.apache.axis.AxisFault : ; nested exception is:
coldfusion.xml.rpc.CFCInvocationException:
[java.lang.IncompatibleClassChangeError : Dependent CFC type(s)
have been modified. Please refresh your web service client.]]
faultActor: faultNode: faultDetail: {
http://xml.apache.org/axis/}stackTrace:
AxisFault faultCode: {
http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode: faultString: [org.apache.axis.AxisFault : ; nested
exception is: coldfusion.xml.rpc.CFCInvocationException:
[java.lang.IncompatibleClassChangeError : Dependent CFC type(s)
have been modifie..
which basically means that the CF server needs restarted.
However if I restart the CF server, no matter how many times I am
still getting this error. If I change up my web service function to
return just a normal array of integers or strings, or I change it
to return one instance of the arbritrary complex type it all works
just fine. I am still a little new on this subject and any
enlightenment would be great. If anyone has found a way around this
please let me know.
Here is my complex type:
<cfcomponent>
<cfproperty name="Game_id" type="numeric">
<cfproperty name="gameDate" type="date">
<cfproperty name="Starttime" type="string">
<cfproperty name="Place" type="string">
<cfproperty name="Level" type="string">
<cfproperty name="Sport" type="string">
<cfproperty name="Gender" type="string">
<cfproperty name="Opponent" type="string">
<cfproperty name="Type" type="string">
<cfproperty name="Link" type="string">
</cfcomponent>
I loop trhough a query and set a cfobject of the types above,
then I append that object to an array and try t o return the array.
Here is the basics of the loop:
<cfset theArray = arrayNew(1)>
<cfobject component = "games" name = "test>
<cfloop query ...>

<cfset arrayApend(theArray, test)>
</cfquery>
<cfreturn theArray>
my return type is array, I think the problem is I need to
specify the return type to be an array of arbritray complex types
which is impossible to do in CF. Anyone find a way to get around
this?? Any feed back at all would be greatly appreciated.

Yes, I have tried it and return type any does not work in
this situation since this function is being consumed by a web
service. It needs to be in the form of an array of arbritrary type
that is defined in a cfc file. Since this is WSDL the returntype
has to be specified to every last bit.

Problem with Oracle Web Service Proxies reusing classes and exceptions

We have an application that have many web services and we're having a really hard time working with Oracle Web Service Proxy. We have many web services that share the same classes for parameters and exceptions. When we generate de proxy classes, it generates a lot of _LiteralSerializer classes. Because I'm reusing the same classes and exceptions it generates the same _LiteralSerializer classes for this classes and they get replaced. For Example
I have classes A and B and Web Services X and Y that use this classes. When I generate the 2 proxies it generates A_LiteralSerializer and B_LiteralSerializer on the 2 proxies and they get replaced and I get "No serlalizers for A class or B class". This problems repeats a lot of times and this problem is a huge risk for our project. We're using JDeveloper 10.1.3.4.
Is there a way to avoid this with Oracle Web Service Proxies?
Regards,
Néstor

Resolved when I create a deployement profile explicitly.
The Webservice.deploy that gets created automatically when I create a web service was giving this issue.
Thanks
Saikrishna

Problem with enabling Web Services on LaserJet Pro MFP M127fw

Similar Messages

Maybe you are looking for