Problem with end-of-Quiz feedback...Captivate 5.5

I've created a short course with a quiz. At the end of the quiz, i would like to have the learner go to one of two slides (one for pass - the other for fail). From the "pass" slide, I would like them to click a button where a PDF certificate will open. The "fail" slide will let the user review the content of the course.
Currently, my file will show the "pass" slide, but will advance to other slides when the button is clicked to print the certificate.
Thus far, the "fail" actions are acting as expected.
Can anyone give me suggestions of how I can fix my file?

Select the slides you want to hide in the Filmstrip, use the right-click menu to hide them. But it is not possible to show a slide by an advanced action, here I do not know what is meant at all? You can skip a slide using a statement Jump to, but a hidden slide will simply not been included in the published version, no way to get it back once the SWF (or other output) is created.
Another remark: be very careful with actions executed 'On exit' because they will only be done if the last frame of the slide is also reached. That is not always the case, if you have an interactive object that has Success/failure actions to go to another slide the last frames after the pausing point of that object will never be visited and the On exit action not be executed.
Lilybiri

Similar Messages

Problem with End button

Hi,
We are facing a problem with the "End" button of IC Webclient(CRM 4.0). After confirming the contact, when we tried to end the contact using End button. It is not working.
Please help us as it is very urgent.
Thnks
YWa

Hello Yang,
1. Go to transaction SE80.
2. Select BSP Application: CRM_IC.
3. Open 'Page Fragments'.
4. Open the file WorkspaceBarPage.htm and go to edit mode.
5. Change the coding in WorkspaceBarPage.htm line 171 like in note 675512
Hope this will solve the problem
Best Regards,
Srinivas.

Having problems with ending my calls on iphone 5

When I try to tap end call on my phone the screen goes blank when I take it away form my ear? It will not let me hang up?

Sounds like a problem with the proximity sensor, which turns off the screen when on a call with the phone is near your face/ear and should turn it back on when the phone moves away again. Try cleaning the screen, especially near the top by the speaker. Also try removing your screen protector.

Is there a problem with ending a URL with somefile.swf?

I have a swf button that launches a new window (ex: http://domain.com/index.html) with the javascript:new.window method. I am finding that sometimes (1 or 2 times out of every 5 clicks) the window is nothing but blank white. I have found, by mistake, that if the javascript:new.window launches directly to (http://domain.com/somefile.swf) then it works everytime.
I think the problem with the blank browser window might be related to slower Internet connections. I can't seem to find anyone else with the blank browser window issue, so I'm wondering what side effects or problems might arise by using the swf as that url instead of an html file that runs the swf.
Flash player detection?
Could a browser decide to download the file (for saving) instead or running it?

I can't quite say what the issue with your swf not loading in the html is. It almost sounds more like an issue of the swf not loading.
If the user has Flash Player installed on their machine (which they should if they are getting your original button) then you probably don't have to worry about the browser trying to download the swf - its probably not going to.
What you might want to be more concerned about is window resizing. If the user can resize the window from the specified size in your js (if you have any) than Flash Player will resize. If the user extends the window beyond the height OR the width, then anything on stage but out side of the fla stage bounds will be visible. You can constrain the size in your js, and set resize = no.
But mainly, youre perfectly fine linking directly to the swf if that is all you need.

Problem with viewing web site- feedback needed

I have a friend who had his site redesigned and integrated with Paypal recently.
He is a Windows user and I am a Mac user.
For some reason I am unable to view the blue Buy Now buttons on his site and if i keep trying long enough the browser will suddenly tell me that the site server cannot be found.
I was told by paypal that it was a cookie problem but i completly cleared out everything and it still does not work.
I have tried both IE and Firefox. IE will work for me sometimes, but once the problem begin happening in Firefox then IE stops working also.
I have also tried using my PC and if i use it before the Mac, i can see it fine but if the Mac starts messing things up i will no longer be able to view it on my PC. I called a friend while having this problem and he said he could see it fine on his PC (not Mac).
I am beginning to think that it is a wireless network problem since i have tried everything else i can think of.
Could some of you please view this page and just let me know if you have any problem seeing the two top Buy Now buttons?
Please also let me know what browsers you used...
The BUY NOW buttons in question should be just below the Download buttons...
Please give me some feedback. This will help me decide if it is a local issue or not.
URL for the page is:
http://www.butlerofficepro.com/products.html
Thanks, this would be a great help to my diagnosis 8-)

Works fine here in Safari.
I think you have a Router problem, or a Modem with a Broadcom Chipset in it.

Problems with Flash Security issues and Captivate projects

Hello,
We're putting together a flash based eLearning course that has been created primarily in Adobe Captivate with flash plugins. The course consists of several modules, all which are embedded into HTML files that are linked to each other.
Our client wants the project on a CD, which is starting to create some problems. Everytime the project goes to open another HTML/flash page, the security issue comes up that mentions that the flash player is trying to communicate to the internet.
Now usually the way to get around this is to go into the security settings and add the CD as an accepted URL - however we can't do this for several reasons. The main one is that we are encasing it within Firefox Portable (included within the CD and as such, read only) and the computers it is being used on may not be connected to the internet.
Any idea how we can get around this? Are the flash player settings stored somewhere locally on your computer, and can we configure them there? (perhaps through an ini or something) to place on the CD with the plugin for Firefox Portable? Is there a simpler way to address this that we're just not seeing?
Thanks,

Hi there
I agree with Michael.
Server2Go is also what I'd have offered. The mention of Firefox portable sound intiguing, but I'm really skeptical that it will do what is needed in this case.
In case it will help, here are some steps for Server2Go.
Download the Server2Go software from http://www.server2go-web.de/download/download.html
Choose the Micro package
This should result in receiving a zip file named distribute_apache1.3_micro.zip
Unzip the contents of the zip file to the root of your hard drive ( C:\ )
This should create a folder named distribute_apache1.3_micro
Open this folder and delete the following files and folders inside:
Files:
splash.bmp
logo.ico
readme.txt
Folders:
dlls
dbdir
cgi-bin
Open the htdocs folder and delete all files and folders inside.
Copy all of your Captivate output files to the htdocs folder
Rename the HTML page Captivate created to index.htm
Copy the contents of the distribute_apache1.3_micro folder to the CD-ROM and test!
Hopefully this helps... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Problem with inporting Flash buttons into Captivate

Hello
I have tried looking around for the fix to this issue, I think I have seen the problem sorted, but not how they have done it.
The problem is that i have made an interface using flash, and inported the SWF into Captivate, this is just a simple pop up menu with buttons and hyperlinks. The issue that I have come accross is that when I come to close the pop up (inside the flash swf) if there is a captivate button behind it it will click this as well. I was wondering if there was a line of AS3 coding that I can add so that when the pop up is loaded it will disbale all the captivate buttons, mouse interactions etc.
Not sure if this should be here or in the flash forum, but as its a captivate/flash issue ive posted it here.
Thanks in advanced for any replies
Nick

Hi,
Download and install ActiveX if you use Internet Explorer.
You need to install plug-in if you use Firefox, Opera, or Safari.
The following link has step-by-step information: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_heading_5
Also, after installing ActiveX, ensure that you disable ActiveX Filtering in Internet Explorer. See the following link for details: http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_2__Disable_Ac tiveX_Filtering__if_you_are_using_Internet_Explorer_9_
Thanks,
Sunil

Problem with End to End JHeadstart Tutorial ( Error: No XMLProvider found )

Good day,
When executing the step-by-step tutorial as listed at:
http://www.oracle.com/technology/consulting/9iServices/jheadstart.html
, I am following the "End to End JHeadstart Tutorial" ( http://www.oracle.com/technology/products/jdev/tips/muench/jhstutorial/index.html ):
I am getting an error "Error: No XMLProvider found" for C:\MyDemo\ViewController\public_html\WEB-INF\page\Employees5Table.uix at step 1d when I try to run the application at point 1d of the tutorial.
The particular file Employees5Table.uix has been generated in step 1c by doing a Run JHeadstart Application Generator for the ' Application Structure File' .
Can anybody provide me more information?
Regards,
Mike

Problem solved by using release 1!
I was using JDeveloper 10.1.2.1.0.1913 (JDeveloper 10.1.2 release 2, build 1913) instead of system10.1.2.0.0.1811 (JDeveloper 10.1.2 release 1, build 1811).
When I did it againg with the release 1 version, build 1811 the problem did not occure. The JHeadstart version was the same.
Looks like a bug to me in in release 2.

Problem with End separator in Sender FCC channel

Hi Experts,
If i use a special character as field separator it is working.The same character is not recognized as end separator.
We tried all different options ,still its not working.
Thanks,
Karthikeyan.

Hi Aamir,
We tried with single quotes and also as Hex values too.
As mentioned earlier, it is working as Field separator not as end separator.
Thanks,
Karthikeyan.

Problems with End User License Agreement

In April this year after trialling Acrobat Pro I decided to take out a year's sub to Acrobat Create. Since that time however I have been unable to open any pdf clicking on a web based (e.g. Google) url. Each time the following message appears - "Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement." I have of course downloaded Acrobat Reader but it makes no difference.
How do I resolve this problem please?

Can't click Accept | Acrobat, Adobe Reader
Mylenium

Problem with end seperator in file content conversion parameters

Hi All
I have a proxy to file scenario, and i am writing the file using file content conversion.
In my message type, there can be multiple object records in a single data record, as shown here:
<Data_Record>
<Field1>111</Field1>
<Field2>222</Field2>
<Object_Record>
<Field3>333</Field3>
<Field4>444</Field4>
</Object_Record>
</Data_Record>
Recordset Structure: Data_Record, Object_Record
Content conversion parameters:
Data_Record.fieldseperator: ,
Data_Record.end_seperator: 'nl'
Object_Record.fieldseperator: ,
Object_Record.end_seperator: 'nl'
My requirement is, every data record should be followed by new line character and every object record should be followed by new line character:
111,222(new line character)
333,444(new line character)
But, my current output is:
111,222,333,444(new line character)
The problem is, as the data record ends only after object record, i am getting new line character only after object record. (technically, the end tag of data record occurs only after the end tag of object record).
Now, how can i get a new line character after data record and after object record?
Thanks
Chandra

Hi Sekhar,
We know the input which you are trying to use(in XML ).
Can you please tell us the output which you are expecting here after using ContentConversion at receiver side.
Regards,
Prakash.

Problem with control buttons/ Quiz project

Hi,
I have this quiz project , the problem is I can not rewind,
back nor forward th eproject??
what can I do ?
Appreciate any help
http://www.megaupload.com/?d=BCGABS48

Please don't cross post the same question to different forum
categories. This question appears to have been copied from a
different category and pasted here.
Please direct any replies to where the question first
appeared. You may do so by
clicking
here

Problems with end tiltles

hey everyone,
i am just about to finish a documentary. on the end we want to have the classic rolling title (credits), that my director made in after effects and exported as a quicktime file. it runs slowly from bottom to top.
but it jitters!! i de-interlaced it but that didn't do the trick. we watched it on a cinema projector as well and there it jitters too!!??
well, i remembered that someone warned me about that, so it seems to be a common problem, but i don't know what to do about it!
can anyone help!?
thanks

Well I'll highlight some words from your post that clearly show the source of you problem.
andy fb wrote:
that my director made in
You need the speed (rate) of the roll (Y pixels moved in n seconds) to be an evenly divisible number of your scan rate. Back in the day when I used AE I would remember the number, but you can't really fix it after its be rendered. Mostly I just use Motions prebuilt credit roll behavior.
o| TonyTony |o

Problem with ending user session in backend with BSP

Hi,
I'm having this strange problem. When I use the standard SAP Budgeting Maintenance BSP application for Enterprise Compensation Management, whatever sessions I have opened doesn't close it automatically in the backend system when I close the BSP application. It leaves my sessions open for a few hours.
I'm using the standard BSP functionality for Budgeting Maintenance, without any sort of modifications whatsoever.
Anyone else have this problem? Perhaps there's a OSS note out there somewhere.....
Thanks.

Hi,
the problem is, that the system gets no session exit.Are you are calling the right page for the applifcation entry point?
If yes, try the following:
Go SE80, have a look at the BSP-Applidcation 'SYSTEM' and the instructions in the page 'session_single_frame.htm'.
Copy the whole BSP-Application in your namespace.
Now, when leaving the Budget-Application, a sessionexit-page will be called, which correctly terminates the session.
Best regards,
Stefan

Problems with end of Podc

Hi All, I have a Creative Zen 8GB. Downloading podcasts are fine. However when listening to them it stops without warning 45-60 seconds before the end. It just goes back to the beginning
Have I done anything wrong?

I suspect that this is a firmware bug. If you are using Zencast Organizer:
-Connect the ZEN to the PC.
Select the podcast then choose the "Transfer" icon.
-The "Convert audio items and picture items into ZENcast videos" box
will be checked by default.
-Uncheck the "Convert audio items..." box. This will place the podcast
into the Music Library folder rather than the Video/ZENcast folder.
The entire file will now play back .

Problem with end-of-Quiz feedback...Captivate 5.5

Similar Messages

Maybe you are looking for