Problem with End to End JHeadstart Tutorial ( Error: No XMLProvider found )

Good day,
When executing the step-by-step tutorial as listed at:
http://www.oracle.com/technology/consulting/9iServices/jheadstart.html
, I am following the "End to End JHeadstart Tutorial" ( http://www.oracle.com/technology/products/jdev/tips/muench/jhstutorial/index.html ):
I am getting an error "Error: No XMLProvider found" for C:\MyDemo\ViewController\public_html\WEB-INF\page\Employees5Table.uix at step 1d when I try to run the application at point 1d of the tutorial.
The particular file Employees5Table.uix has been generated in step 1c by doing a Run JHeadstart Application Generator for the ' Application Structure File' .
Can anybody provide me more information?
Regards,
Mike

Problem solved by using release 1!
I was using JDeveloper 10.1.2.1.0.1913 (JDeveloper 10.1.2 release 2, build 1913) instead of system10.1.2.0.0.1811 (JDeveloper 10.1.2 release 1, build 1811).
When I did it againg with the release 1 version, build 1811 the problem did not occure. The JHeadstart version was the same.
Looks like a bug to me in in release 2.

Similar Messages

Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
error, Location: 2'
When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
were illegible, but no other weirdness was observed.
I have microsoft 2008 installed on my Mac OS X version 10.6.8.
I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

Hi,
This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
Please use the "Fix it" tool in the following KB article to resolve the problem. See:
http://support.microsoft.com/kb/2528942
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Problem with End button

Hi,
We are facing a problem with the "End" button of IC Webclient(CRM 4.0). After confirming the contact, when we tried to end the contact using End button. It is not working.
Please help us as it is very urgent.
Thnks
YWa

Hello Yang,
1. Go to transaction SE80.
2. Select BSP Application: CRM_IC.
3. Open 'Page Fragments'.
4. Open the file WorkspaceBarPage.htm and go to edit mode.
5. Change the coding in WorkspaceBarPage.htm line 171 like in note 675512
Hope this will solve the problem
Best Regards,
Srinivas.

Having problems with ending my calls on iphone 5

When I try to tap end call on my phone the screen goes blank when I take it away form my ear? It will not let me hang up?

Sounds like a problem with the proximity sensor, which turns off the screen when on a call with the phone is near your face/ear and should turn it back on when the phone moves away again. Try cleaning the screen, especially near the top by the speaker. Also try removing your screen protector.

Is there a problem with ending a URL with somefile.swf?

I have a swf button that launches a new window (ex: http://domain.com/index.html) with the javascript:new.window method. I am finding that sometimes (1 or 2 times out of every 5 clicks) the window is nothing but blank white. I have found, by mistake, that if the javascript:new.window launches directly to (http://domain.com/somefile.swf) then it works everytime.
I think the problem with the blank browser window might be related to slower Internet connections. I can't seem to find anyone else with the blank browser window issue, so I'm wondering what side effects or problems might arise by using the swf as that url instead of an html file that runs the swf.
Flash player detection?
Could a browser decide to download the file (for saving) instead or running it?

I can't quite say what the issue with your swf not loading in the html is. It almost sounds more like an issue of the swf not loading.
If the user has Flash Player installed on their machine (which they should if they are getting your original button) then you probably don't have to worry about the browser trying to download the swf - its probably not going to.
What you might want to be more concerned about is window resizing. If the user can resize the window from the specified size in your js (if you have any) than Flash Player will resize. If the user extends the window beyond the height OR the width, then anything on stage but out side of the fla stage bounds will be visible. You can constrain the size in your js, and set resize = no.
But mainly, youre perfectly fine linking directly to the swf if that is all you need.

Netflix: am having problems with the iPad on it. Error box pops up and tells me 'safari cannot connect: too many redirects'. Also the iPad freezes on netflix. Advise needed. Thnx.

Whew, this is driving me nuts. I use the iPad for nearly all my online connection. Dunno why netflix is not working well on it lately; it used to work well enough.

We have the same problem with download interruptions in our app v32.
And in addition it seems that every interruption of download leaves some unused data on device. When we try to continue the download, it mostly fails at the same point. But with every attempt the application takes more and more device space. It goes so far that we have three- or fourtimes more device space in use that is the common size of app and downloaded content, although we actually still didn't download the whole content. (We try also download the same folio with Adobe Content Viewer and it does the same.)
Finally we open the content and force to download remaining articles one by one with moving across the content manually. Articles where download fails we downloaded as last. It wasn't without problems but we have success after many attempts. In the end the device space used by app with content was enormous! When we deleted all content, used space was decreased by the size of folio, but the unused data wasn't removed until the whole application was deleted from iPad. We send it as bug report to Adobe.
Now we are in very bad situation, because our clients can't download their paid content. (Most of them hasn't so big patience as we had with downloading content.)
So we hope that dev team figure out soon what is going on or we are finished.

Problem with Drive Encryption for HP ProtectTools - Error EE050014

Hello!
I have a problem with starting up my HP.
I am using a HP Probook 4530s, have had it for approximately 2 years now - this is a new problem that has never occured before.
On startup, after swiping my finger/entering the password at the HP Protecttools screen, I get an error screen titled "Mcafee endpoint encryption" saying "Error 050014 file access error". As far as I'm concerned this is not a Mcafee product although it mentions Mcafee, and I will not receive any help from their support forums. All I can do is press enter, then the cursor is locked in place and nothing but restarting the computer can be done, and then the process repeats.
Before this error occured, I was going through files with an anti-malware program and it is possible I may have deleted something that might have triggered this, however since I cannot access the desktop or anything it is impossible for me to look into that.
I have been desperately looking for a solution for a while now but have come up with nothing solid. Any help is greatly appreciated!
Regards!

Hello matroid,
Your ProBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Problems with a QuickTime movie file. Error 2048 message

I am having problems with a QuickTime file.
The file is on a TDK 4GB pen drive.
I can access the file without problem directly from the pen drive.
I am using a Sony VAIO Laptop running Windows 7.
QuickTime version 7.71.80.42.
When I transfer the file to a folder or upload to send via e-mail on Hotmail and then try to open it I receive an Error 2048 message - "Couldn't open the file.......because it is not a file that QuickTime understands.
Any help would be appreciated.

You should be fine: a standard DVD can contain up to 120 minutes of video, but this includes menus etc.
iDVD is not concerned with file sizes, just length. It will automatically compress the iMovie file to the standard DVD format of mpeg2 - which is 4.7GB for 120 minutes!
I have once made a family DVD 115 minutes long, but after the family either protested or fell asleep, I have tried to keep them under 75 minutes!

Problem with shortcut....fatal error

itune 8.1.1 upgrade froze on installation. Now I get the above message when trying to reinstall/config itunes or any new program. Have tried restore etc but no luck. Any ideas.

I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you.

There is a problem with Adobe Acrobat Reader etc etc error code 103?? Help Please

Adobe Acrobat Reader issue as above - downloaded latest version again still issues. I am using an old Acer laptop with Windows XP which I only now use for printing

The etc etc refers to the usual standard message as follows - also re Acrobat I was merely repeating the message given.
'there is a problem with Adobe Acrobat Reader. If it is running exit and try again (103:103)' this was the exact message given. I had version 11.0.08 which I have now deleted and am using an earlier version 10.0.4 which seems to have resolved the problem for the time being

Problem with rendered tables in JHeadstart 10.1.3.3.87

Hi,
We have recently upgraded from Jhs 10.1.3.3.52 to 10.1.3.3.87 (using JDev 10.1.3.4.0.4270) and have run into a problem with a window using regions. We have horizontal region containers, vertical region containers, stacked region containers and detail group regions. The tables in these containers/regions are not rendering at all. When I compared the .jspx pages of both versions of Jhs I noticed the 10.1.3.3.52 version had the following code (which works) as
<af:panelGroup rendered="#{(bindings.AwardView1Iterator.*currentRowIndexInRange!=-1* and bindings.AwardView1Iterator.findMode!='true')}" id="AwardView1DetailGroupsBelow" partialTriggers="AwardView1Table">
and the 10.1.3.3.87 version had the following code as
<af:panelGroup rendered="#{(bindings.AwardView1Iterator.*currentRow!=null* and bindings.AwardView1Iterator.findMode!='true')}" id="AwardView1DetailGroupsBelow" partialTriggers="AwardView1Table">
the problem seems to be in the following line in the horizontalRegionContainer.vm and stackedRegionContainer.vm -
#JHS_PROP("rendered" $subRegion.rendered)
as in line 33 of the horizontalRegionContainer.vm - <af:panelGroup #REGION_PARTIAL_TRIGGERS($subRegion) *#JHS_PROP("rendered" $subRegion.rendered)* id="#REGION_ID()${subRegion.name}PanelGroup" and
as in line 32 of the stackedRegionContainer.vm - <af:showDetailItem text="#REGION_TITLE($subRegion)" *#JHS_PROP("rendered" $subRegion.rendered)* #JHS_PROP("disabled" $subRegion.disabled) #REGION_PARTIAL_TRIGGERS($subRegion) id="#REGION_ID()${subRegion.name}Tab">
has anyone run into a similar problem?
thanks,
Lana

Thanks Steven!
We appreciate the reply and this solution. Could you, or anyone, point us in the direction of helpful documentation with respect to Velocity Templates. We don't really have as good an understanding as we would like, and most of our customizations are our best guess.
Thanks very much.
MaryB
U of Windsor

Basic problem with connecting to disk via Airport Extreme - No Disks Found

I've a Lacie BigDisk (500GB) which connects fine via USB or firewire directly to my Macs (HFS). When I plug it into the AirPort Extreme, the Airport Utility shows the disk as connected, and I've ticked File Sharing, with "Secure Shared Disks" set to "With base station password".
The AirPort Disk Utility is set to Automatically Discover AirPort disks and to Show AirPort Disks in the menu bar. It sees the Airport Extreme, and the action is set to "Connect with Password".
When I close the AirPort Disk Utility I can see the disk icon in the top menu bar, and clicking on this provides a menu with (greyed out) "No Disks Found", and the option to "Open Airport Disk Utility..."
Any ideas - it's driving me mad!
Thanks
Andrew

I am having the same problem with a Lacie 320 GB HD as well with my AEBS. I can't get it to stay recognized in Leopard. I have gotten it to work but only for 10 minutes then I have to unplug and start over. I know that it works fine in Tiger but I am having troubles with my drive "disappearing" with Leopard. From what I can tell others have had this problem but I am not finding a solution. Some have said going back to 7.1.1 works however my AEBS is 2 months old and the oldest firmware it has in the airport utility is 7.2. I have also found old versions on the apple website most look for an intel chipset which I do not have I am running a powerbook G4, also my friend on a new MacbookPro couldn't get them to work at all. Air disk is an amazing concept when am I going to be able to use it?

Problem with End separator in Sender FCC channel

Hi Experts,
If i use a special character as field separator it is working.The same character is not recognized as end separator.
We tried all different options ,still its not working.
Thanks,
Karthikeyan.

Hi Aamir,
We tried with single quotes and also as Hex values too.
As mentioned earlier, it is working as Field separator not as end separator.
Thanks,
Karthikeyan.

Problems with End User License Agreement

In April this year after trialling Acrobat Pro I decided to take out a year's sub to Acrobat Create. Since that time however I have been unable to open any pdf clicking on a web based (e.g. Google) url. Each time the following message appears - "Before proceeding you must first launch Adobe Acrobat and accept the End User License Agreement." I have of course downloaded Acrobat Reader but it makes no difference.
How do I resolve this problem please?

Can't click Accept | Acrobat, Adobe Reader
Mylenium

Problem with end seperator in file content conversion parameters

Hi All
I have a proxy to file scenario, and i am writing the file using file content conversion.
In my message type, there can be multiple object records in a single data record, as shown here:
<Data_Record>
<Field1>111</Field1>
<Field2>222</Field2>
<Object_Record>
<Field3>333</Field3>
<Field4>444</Field4>
</Object_Record>
</Data_Record>
Recordset Structure: Data_Record, Object_Record
Content conversion parameters:
Data_Record.fieldseperator: ,
Data_Record.end_seperator: 'nl'
Object_Record.fieldseperator: ,
Object_Record.end_seperator: 'nl'
My requirement is, every data record should be followed by new line character and every object record should be followed by new line character:
111,222(new line character)
333,444(new line character)
But, my current output is:
111,222,333,444(new line character)
The problem is, as the data record ends only after object record, i am getting new line character only after object record. (technically, the end tag of data record occurs only after the end tag of object record).
Now, how can i get a new line character after data record and after object record?
Thanks
Chandra

Hi Sekhar,
We know the input which you are trying to use(in XML ).
Can you please tell us the output which you are expecting here after using ContentConversion at receiver side.
Regards,
Prakash.

Problem with End to End JHeadstart Tutorial ( Error: No XMLProvider found )

Similar Messages

Maybe you are looking for