Problem with Energy Management and One key Theater

I have a Lenovo G560 laptop. Actually, I have first installed Windows 7 x64 on my lappy but it caused many problems so I again reinstall windows 7 32 bit. But now Energy Management and One key theater are not working at all.
Is there any fix for it???

As I understand you are unable to use OneKey Theater and Lenovo energy management.
The installation of both OneKey Theater and Power Management are necessary for using OneKey Theater. Through "Start" à "All Programs" à "Lenovo", or "Start" à "Control Panel" à "Programs" à "Programs and Features", you can find out whether OneKey Theater has been installed.
If it has been installed, you need to make sure the following two items has been started in “Start à Run à msconfig à Startup”
After that, if OneKey Theater is still unable to be started, you can run it manually by double clicking "Onekey Studio" through "Local Disk(C" à "Program Files" à "Lenovo" à "OneKey Theater".
If OneKey Theater has been started, you can see "Onekey Studio.exe" under the "Processes" tab of "Windows Task Manager".
OneKey Theater can be download from the mentioned below web link.
http://consumersupport.lenovo.com/in/en/driversdownloads/Drivers_Show_2651.html
Lenovo energy management software can be download from the mentioned below web link.
http://consumersupport.lenovo.com/in/en/driversdownloads/Drivers_Show_2604.html
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Problem with type conversion and primary key during row fetch

[Note, this error occurs in Oracle XE, APEX 2.1.0.00.39]
I have been having a problem with Automatic Row Fetch:
ORA-01460: unimplemented or unreasonable conversion requested
So in an effort to resolve this, I created a PL/SQL process with the query below and was able to isolate the same error. The problem seems to come from one of the primary keys being a "number" type (APP_ID). The error occurs on the line:
where u.app_id=:P5_APP_ID
I have tried the following variations on this line in an effort to resolve this, but all generate the same error:
1) where to_char(u.app_id) = :P5_APP_ID
2) where u.app_id = to_number(:P5_APP_ID)
3) where to_char(u.app_id) = to_char(:P5_APP_ID)
I've also tried the laternate syntax "&__." and "#__#", but these don't function in the Source field and show up as syntax errors.
Any suggestions are welcome.
begin
for r in (
select app_name, apptype, appcreator, appurl
from application_users u, application_info i
where u.app_id=:P5_APP_ID
and i.app_id=u.app_id
and u.username=:P5_USERNAME)
loop
begin
:P5_APP_NAME := r.app_name;
:P5_APPURL := r.appurl;
exception
when others then
raise_application_error(-20000,'In Loop Failure',true);
end;
end loop;
exception
when others then
raise_application_error(-20000,'Out of Loop Failure',true);
end;
Thanks in advance,
Barney

I found a prior post referencing a similar issue and it was solved by using the "v(__)" syntax. This did resolve my issue, however, I have a quick follow-on which I'm hoping someone can answer quickly...
Since the "v(__)" syntax won't work for the Automatic Row Fetch (at least to the best of my knowledge), I have to do a manual process. However, the manual query as shown above doesn't actually populate any of the form values through the bind variables. They all remain at their cached values from prior data entry on the form.
Is using the bind variables for assignment incorrect, or is there something that must be done to get the updates to show up in the form (ordering of processes, etc.).
My manual process is running in the Load: Before Header state so I would have expected it to update all of the fields.
Thanks in advance,
Barney

Intermittent problem with cross dissolve and chroma key

It seems that in 1 out of 10 videos I produce in Final Cut Pro there is a problem with the cross dissolve effect and chroma key. What happens is that during the cross dissolve, clip A fades out with a green tint and clip B fades in with a green tint.
Today I am working with two videos that I captured using the same work flow on the same day. One project exhibits the tint while the second project does not. If I import the problematic footage into the good project the tint problem follows the footage. In the good footage, the cross dissolve produces a result that does not have a green tint. If I re-capture the "bad" footage the results are the same.
Has anyone else experienced this and does anyone have an idea how to resolve this problem?
Thank you.
Dual G5 Mac OS X (10.4.6)

In my project, both clips are source clips with Chroma, Color Smoothing and Matte Choker applied. A dissolve from non-chroma clip to chroma clip works fine. Only problem is with two chroma clips. In my dissolve, the error appears as red fringing in the area between the two masks.< </div>
You're using creative shorthand that doesn't help. "Chroma clip" means the clip to which you have applied all of these effects? What masks? Where are you getting the masks?
To understand what's going on with all them itty bitty pixels in a stack of interactive effects, do me a favor: render out a short piece, say 10 seconds of each of your chromaclips as separate movies over transparency using the Animation codec. Reimport them and put them over a solid colored Dissolve between them using different types of dissolves. Post back and tell us (me) what's going on.
I still consider this to be a bug -- nesting adds more steps to the workflow than if this bug did not exist. < </div>
It's not a bug. Your pixels are running down a pathway. It's a question of building the correct pathway and having the correct pixel wranglers with the right kinds of cattle prods.
bogiesan

Problem with childs nodes and automatic key mapping in a Data Object

Hi experts!
I'm doing the service order tutorial from the mobile help at [this link|http://help.sap.com/saphelp_nwmobile71/helpdata/en/21/9b5b924c3b434fba4767731794b029/frameset.htm] and I have a problem...
In the topic "Modeling the Equipment Data Object", says you have to mark the "Automatic Key Mapping" checkbox. So when I had to create a third child node ( the location node ) the system raised an exception with the message "Deselect automatic key mapping flag for more than two-level nodes". I'm trying deselecting the flag and creating the location node, but when I want mark again the automatic key mapping flag, this is disabled.
What can I do to solve this and create the three child nodes with the flag marked? It's a configuration thing?
Any help it's very welcome. Thanks in advance.
Best regards,
Simon.

The thing is: Its not allowed to use automatic keymapping if you have more than two levels. This is why the message showed up, and this is why its been disabled.
What automatic keymapping does: Figures out automatically which child node belongs to which parent (by guessing from the field name and type, which fields in the child correspond to which key fields of the parent).
On three levels, this becomes more complicated => Its disabled.
How to do keymapping yourself instead of having the DOE do it automatically: Do 'Explicit keymapping' from each child to its parent. Explicit keymapping is done by clicking on the corresponding menu button in the child node. Here you need to associate child node fields (they need not be key fields of the child, but they are allowed to be that as well) to each of its parent nodes key fields (so that each child can be associated to its parent).
Cheers

I am having problem with my F9 AND F10 KEYS TO CONTROL sound

i think my f9 and f10 keys are not working properly..
This question was solved.
View Solution.

Ok. I found where was the problem. Actually the letter O should be the number 0.
Please do the below procedure.
Uninstall the current driver for the IDT audio.
Resource:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Download and install the latest IDT audio driver for your model from here.
Restart the system.
Uninstall the current driver for the HP Quick Launch Software (if it's installed in the system).
Resource:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Download and install the latest HP Quick Launch Software driver for your model from here.
Restart the system.
Download and install the latest HP On-Screen Display Utility version from here.
Restart the system and check the results.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Software mirror problems with disk management and diskpart

I have a small server. It was originally using a single 250GB drive and one partition. It was a Dynamic Disk. Using Acronis I successfully did a backup/restore of the system to a 1TB drive to provide for storage.
I have two new same model Western Digital Blue standard format (512 sector) 1TB drives. One has the restored working system mentioned above. The other is empty. It is showing as a dynamic disk unallocated.
I attempt to mirror the system by using disk management, right-click on system drive and select "Add Mirror", get and choose 2nd disk selection, and the system churns for a few seconds and returns error message about DiskMgt not having up-to-date
info. I close and restart DiskMgt and get the same thing.
I invoked DiskPart and executed Select Volume 0, ADD Disk=1, after a few seconds I received the same error message.
I have tried both of these methods numerous times. I ran chkdsk /f/r on the primary drive and retried with same results.
Tom Fleischmann

Hi Tim,
à
the system churns for a few seconds and returns error message about DiskMgt not having up-to-date info
Would you please let me know the complete error message that you can get when mirror?
Meanwhile, please refer to following thread and check if can help you.
Windows
7 Pro Mirror
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Problems with instance manager and bound items

I'm having a problem with bound fields.
I have made a form that uses the instance manager so i can add several products,
i'm using a button to export all this to a XML file via XML schema but for some reason when i preview the form
i can add new instances without problems and the original instance works ok but the second instance and all instances after that changes when anything is changed in any of them, they are in other words linked.
Removing the xml schema made it work like it's supposed to but how do i get it to work with the xml schema?

It sounds like your XML schema may not be properly setup to reflect the unlimited number of instances.
<xs:element name="products">
     <xs:complexType>
          <xs:sequence>
               <xs:element name="product" maxOccurs="unbounded">
                    <xs:complexType>
                         <xs:sequence>
                              <xs:element name="product">
                                   <xs:complexType>
                                        <xs:sequence>
                                             <xs:element name="productName" type="xs:string"/>
                                             <xs:element name="useCase" type="xs:string"/>
                                        </xs:sequence>
                                   </xs:complexType>
                              </xs:element>
                         </xs:sequence>
                    </xs:complexType>
               </xs:element>
          </xs:sequence>
     </xs:complexType>
</xs:element>
The element you wish to repeat should have a "maxOccurs" property that is greater than 1. You should also make sure that your subform is properly linked to this element.

[SOLVED] a problem with gpg-agent and ssh keys

I'm baffled by a strangle problem:
My setup is as follows: I use gpg-agent with --enable-ssh-support, so that my ssh keys are handled by it. All was fine (when I ssh'ed to another machine, a pinentry window popped up, asked for a password, and if I entered the correct one, gpg-agent would decrypt its copy of my private ssh key and use it for identification). But: I needed to change my ssh key, and so I generated a new one. Next, I ssh-add'ed it to gpg-agent (one password to decrypt the private key, then twice another password for gpg-agent). I uploaded the public key to a server. The setup should be complete.
The problem is that when I ssh to a machine, a pinentry window comes up, but it does not accept my password (the one that I entered twice when ssh-add'ing the key). I tried adding with various different passwords (always deleting ~/.gnupg/private-keys-v1.d/*, since 'ssh-add -d ~/.ssh/id_rsa.pub' would not work for some reason - it would not make gpg-agent forget the key), different pinentry programs ( -qt4, -gtk-2, -curses), and still the same problems. Pinentry itself seems to work fine, since if I enter two different things when it asks for a new passphrase for the key, it detects that there's a problem.
So, can anyone help? What could I try (please don't post just to say that I could/should use ssh-agent, or keychain, or anything else. I have used various things, and I like this setup the most. It worked before, and I would like to find out why it stopped working and how to get it back to speed.)
Thanks.
Last edited by bender02 (2010-02-15 09:52:54)

Thats a known bug with the new gpg version.
http://lists.gnupg.org/pipermail/gnupg- … 38045.html
You could use an older version of gpg or use a development version.

Problems with database modelling and primary keys

Hi,
I use JDeveloper exclusively for data modelling and generating the sql to build my db.
Its good but i have found a bug that can be rather annoying:
If i change the primary key of a table, the change does not seem to register within the model. So when i try and create a foreign key relationship to another table, the type is of the old type (say i went from varchar2 to number).
The only way around this is to delete the table and create it again. This also causes problems because the db generation wizard will then refuse to open properly (because it does not know that a table has been deleted).
Is this a known issue?
Cheers
Rakesh

Is this forum meant for reporting bugs or not? This issue i have stated is repeatable and in the current version.
R

Problems with 2 computers and one ATV.

Hi All,
I am still having a few problems setting up my ATV as I want to. I have searched the forums and learned loads, but I still have a couple of areas that I need help on.
I have a 40Gb ATV.
I have an iMac G5 and a PB G4 both connected wirelessly to my TC. The TC has the iTunes library on it and I use this on both the G5 and PB. The iPhoto library is here too.
I have 2.2 on the ATV. I have set the ATV up on the G5 to sync photos and stream music and movies. This works fine and I set it up in settings/computers/new iTunes library, entered the 5 digit code and synced the photos etc.
On my G4, the ATV is listed in the preferences/ATV, but is not visible in the devices. I guess this is because I have not told the ATV to look here.
Now, to get the ATV to be able to be displayed on the G4, the only way to do it is to go through the settings on the ATV, link a new iTunes library. But this means my synced photos get deleted from the ATV.
What is the best way to have both my iMac G5 and PB G4 display the ATV in the iTunes devices list without having to re-sync my photos each time. This is probably down to me not really fully understanding the whole ATV thing. So far I really am impressed by it, but I am yet to get the best of it.
Thanks in advance.
Rob

You can only sync one library, if the the G5 library is the one you want synced you must stream the library from the G4.
('Settings/computers/connect to shared library' and not 'connect to itunes....'

Problems with power manager and saving settings Gnome3

Hi guys,
I installed on my Arch Linux system two desktop environments: xfce4 und gnome-shell. On xfce4 anything is fine, but on gnome-shell some preferences were not saved. Especially the time (I'm living in Germany, and the System always shows local time + 1h) and the startup-applications which I setted with gnome-session-properites are saved but nothing happens on next startup (e.g. guake is in the list and is not started automatically).
An other point is that the desktop folder is not loaded (I setted it with gnome-tweak-tool), but when I manually start nautilus, it is shown.
The last point is the power manager. I'm working on laptop and the battery symbol is not shown. I can watch my battery status with executing 'acpi' but thats very annoying. Other components of the power manager are not working, too. The laptop turns off it's monitor, when nothing is done within approx. 10 minutes (I setted as well in the xfce power manager that the monitor should not be turned off as in the gnome-power-manager). I installed the gnome power manager simply with pacman -S gnome-power-manager. Just for you to know.
Thank you for reading this and hopefully you can help me...
pausch
PS: please do not mind my mistakes, i am german and do not natively speak english.
Last edited by pausch (2012-01-08 14:33:15)

pausch wrote:
@wonder
anything looks better now, i think gnome is not built to start that another way than starting gdm...
no, works fine with startx. you only need to add proper stuff in ~/.xinitrc like explained in the wiki.

Hi I have had problems with photo's and films going onto a 2010 Apple classic MP3. Have managed to sort photos but it still refuses to copy the films purchased. It comes up with not copied cannot be played on this ipod.

Hi have had problems with photo's and films going onto a 2010 Apple Classic mp3. Have managed to sort photo's but the films won't copy and comes up with message videos not copied cannot be played on this ipod

razzbust wrote:
...but the films won't copy and comes up with message videos not copied cannot be played on this ipod
Self explanatory.
You could try creating an iPod version of the films.
Use CTRL and B to display the Menu bar shown above. Alternatively, use the ALT key, followed by the F key, the W key and finally the I (eye) key - that's (menu)/File/Create New Version/Create iPod or iPhone version.

Need help for the installation of one key theater and the improper working of touchpad

hi can anybody tell me how can i install one key theater in g560 laptop running on win 7 32 bit OS as me trying to install it but it doesnt work.
How to solve the touchpad issue in g560 as sometimes the touchpad stops funtioning or not sensing the finger movement.

Hi and Welcome to the Community!
I'm not sure, from your description, exactly what you are looking for. "Username" and "E-mail"? Are you perhaps looking for the ability to enter a "reply-to" email address that is different from the actual email address of the account you are sending from? If so, that feature is indeed not presently available in BB10. Among other features, it may be one that many hope are added to the BB10 platform with future OS releases. But, for now, it is what it is.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

I want to create a form with a manager completing one section and a staff member another. Both sections protected by different passwords.

I want to create a form with a manager completing one section and a staff member another. Neither should be able to edit the others. Can different sections be password protected by different passwords? I'm thinking there might be an "official use only" function.

You can use 2 forms in one portfolio.

Problem with Energy Management and One key Theater

Similar Messages

Maybe you are looking for