Problem with enhancement RSR00001

Hi,
I hope you can help me. I've got a problem with the enhancement RSR00001. The include ist activated, but the coding isn't execute when I start my querie. No break-point help me. Nothing will run.
Any ideas?
Release BI 7.0.
Thanks
Martin

Hi,
I_STEP plays improtant role in filling up customer exit variable. Check it in your code. If not there, test it as follows.
First add IF I_STEP = 1 & your logic to fil your variable. And make you varibae as "Ready for Input". If you runn the report, you can see the values in selection screen.
Note: That the project which is having this enhancement RSR00001 should be in active version through CMOD. Sometimes usotmer exit won't work if project is in inactive versions.
Hope it helps tp solve your issue.
Regards,
Arun Thangaraj.

Similar Messages

  • Problem with Enhanced Healing Brush

    LR5.0, Windows7 (64 bit)
    I am having a problem with the Advanced Healing Brush, where the colors in the destination area don't match the colors in the source area, even with opacity at 100. Is this a known bug, or is this something I am doing wrong?
    Here's the original picture. I want to remove the date, and the spotlight underneath the date, on the bottom right.
    Using the enhanced healing brush, I try to remove this and replace it with a similar area of grass
    You can see the opacity is 100, and yet the color of the grass in the destination area is noticeably darker than the color of the grass in the source area.
    So, what is wrong here? Bug, or user error?
    By the way, I also performed a similar operation in Photoshop Elements, with much nicer results.

    Hi DJ,
    I find the healing brush a bit so-so. I've had the same result as yourself - it will blend in poorly leading to muddy tones.
    Also the boundaries of the brushed area are too distinct. Overall, I see the clone setting as more useful.
    I've had a cut at your picture, using multiple selections. I could do better,(the shadow lines are not well aligned) but I think this illustrates my point.
    I find that one large selection (even though that's the example used in the LR video) rarely works well for me.
    I think this tool can use some improvement.
    Hope this helps,
    hans

  • Problem creating enhancement RSR00001

    In my BW system, i want to use the enhancement RSR00001 which has a function module. In the function module EXIT_SAPLRRS0_001, there is a Z include ZXRSRU01. To use this i followed the following steps
    1. Create Project
    2. Assign the enhancement to it
    3. Go to the  function module EXIT_SAPLRRS0_001
    4. Double click on the include ZXRSRU01 to create it.
    When i double click to create it, i get the following error
    Program names ZX... are reserved for includes of exit function groups
    Message no. DS027
    Diagnosis
    You attempted to create a program name beginning with ZX but this name range is reserved only for includes of exit function groups (function groups containing only function exits).
    If you want to create a program ZXaaabbb, note the following for program type I (Include).
    1. The program is an include of the function group Xaaa:
    In this case, the INCLUDE ZXaaabbb statement should not be inserted in the main program SAPLXaaa, but in the program ZXaaaZZZ .
    2. The program is not an include of the function group Xaaa:
    Since the syntax check for includes of this name range searches for the global data in the program LXaaaTOP (not ZXaaaTOP), you may not be able to check the include in isolation (--> check main program).
    Procedure
    Choose a different program name
    what is it that i am missing?
    Thanks,
    NS

    Hi Nimmi,
    When you go to the function module screen just place the cursor on ur include name and do single click on that.
    Now press F2 button.
    And you will get the warning message now Just leave that as it is and press enter.
    Now you will get a new popup screen.
    I hope it helps.
    Reward points
    Thanks,
    Prasnanna

  • Problem with Enhanced Receiver Determination

    Hi Friends,
    I am doing the enhanced receiver determination scenario,  But it is giving the
    error in SXMB_MONI like this
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Receiver Identification
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
      <SAP:P1>Problem while determining receivers using interface mapping: Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264 Problem while determining receivers using interface mapping: Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264 Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264 System expected the element 'Receivers'</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    this is error is coming in the SXMB_MONI
    THE DATA type(Receivers) we create in basis component is comes automatically?
    are we have to create?
    in my scenario i creted manually,
    is it compulsory to specify the properties for the party and agency?
    is it compulsory to create 2 Receiver structures in msg structure?
    if yes what r those, actually i used from sap.help.com,
    Can any body should give me the solution for this, regarding mapping and configuration , if anybody experienced this scenario. Pls . give me  the guidelines to do.

    Hi,
    the mapping creating the receiver list is not producing the required element "Receivers" from Namespace "'http://sap.com/xi/XI/System". Look to the operation mapping given in the enhance Receiver Determination (IB Directory)  and detect the corresponding mapping program (ESR).  Copy the source payload from MONI, test the mapping program and correct it.
    Regards,
    Udo

  • Problem with Enhanced Receiver Deterrmination

    Hi,
    I am facing an issue with the Enhanced Receiver Deterrmination (ERD) at runtime for an EOIO scenario. When a message gets split for the defferent service it fails complaining about mapping. If I retrigger it gets delivered.
    However if I provide a queue filter this failure does not occur even if logically that queue filter definition does not make any sense to the scenario. for eg: The filter is maintained for a different scenario say A, but scenario B which has ERD will work. I am well confused, shoot your questions pls. Please help in case you have faced similar issue. We are on 07s SP17.
    regards
    Unni

    Hi Venkat,
    You are correct, I use extended Receiver determination. As I have mentioned earlier, the scenario works well if I specify the queue filter, so all related objects exists.
    Basically the split message with out a queue filter is poinitng back to the source message. But if I re-trigger from moni it goes well. With a queue filter, it works without a cause.
    See the sample message for error
    - <SAP:Receiver>
      <SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
      <SAP:Service>BS_ENVISION_SAP_EMERG</SAP:Service>
      <SAP:Interface namespace="urn:sap-com:document:sap:rfc:functions">ZWM_INBOUND_NOTIFICATION_EMERG</SAP:Interface>
    - <SAP:Mapping notRequired="M">
      <SAP:ObjectId>oPLLbgxJOWimAK6rdZb/MA==</SAP:ObjectId>
      <SAP:SWCV>oZGAQNmpEdym2dnSCqoHjQ==</SAP:SWCV>
      <SAP:SP>-1</SAP:SP>
      </SAP:Mapping>
      </SAP:Receiver>
      *<SAP:Interface namespace="http://enbridge.com/envision/envision2/jdbc">MI_TBL_WMS_SOURCE_STAGING_SDW_EGD</SAP:Interface> *
      </SAP:Main>
    *The actual should be *
    - <SAP:Receiver>
      <SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty" />
      <SAP:Service>BS_ENVISION_SAP_EMERG</SAP:Service>
      <SAP:Interface namespace="urn:sap-com:document:sap:rfc:functions">ZWM_INBOUND_NOTIFICATION_EMERG</SAP:Interface>
    - <SAP:Mapping notRequired="M">
      <SAP:ObjectId>RNPgv18MOBmjhpr+oO1mNw==</SAP:ObjectId>
      <SAP:SWCV>oZGAQNmpEdym2dnSCqoHjQ==</SAP:SWCV>
      <SAP:SP>-1</SAP:SP>
      </SAP:Mapping>
      </SAP:Receiver>
      *<SAP:Interface namespace="urn:sap-com:document:sap:rfc:functions">ZWM_INBOUND_NOTIFICATION_EMERG</SAP:Interface>*
      </SAP:Main>

  • Problem with Enhancement Spot

    Hi Experts,
    I have implemented an enhancement spot in standard report program and export the data to some memory id. But the problem is when i am trying to execute the standard report the internal table which i want to export has entries. When i execute the custom program the tables does not has data. What is the problem and how can i solve that.
    Rgds,
    Bujji

    Hi ,
      Problem got resolved by myself, thank you guys...
    Rgds,
    Bujji

  • I am having a problem with enhancing a .class for JDO

    Hi
    i am having a rpoblem with JDO . please help me for this.
    Buildfile: build.xml
    compile:
    xdoclet:
    [ojbdoclet] May 26, 2005 11:08:55 AM xdoclet.XDocletMain start
    [ojbdoclet] INFO: Running <ojbrepository/>
    [ojbdoclet] May 26, 2005 11:08:56 AM xdoclet.XDocletMain start
    [ojbdoclet] INFO: Running <torqueschema/>
    build:
    build_if_with_mainclass:
    enhance-jdori:
    [java] Enhancer: options:
    [java] verbose = true
    [java] quiet = false
    [java] forceWrite = true
    [java] noWrite = false
    [java] sourcePath = null
    [java] destinationDirectory = build/classes
    [java] propertiesFileName = null
    [java] doTiming = false
    [java] classNames = {
    [java] }
    [java] jdoFileNames = {
    [java] src/java/org/apache/ojb/tutorial5/Product.jdo
    [java] }
    [java] classFileNames = {
    [java] build/org/apache/ojb/tutorial5/Product.class
    [java] }
    [java] zipFileNames = {
    [java] }
    [java] dumpClass = false
    [java] noAugment = false
    [java] noAnnotate = false
    [java] JDO ENHANCER: using file: file:/D:/ojb-blank/ojb-blank/build/org/ap
    che/ojb/tutorial5/Product.class
    [java] Class Locator: using class files: {
    [java] build/org/apache/ojb/tutorial5/Product.class
    [java] }
    [java] JDO ENHANCER: using file: file:/D:/ojb-blank/ojb-blank/src/java/org
    apache/ojb/tutorial5/Product.jdo
    [java] -------------------------------------------------------------------
    [java] JDO ENHANCER: Enhancer: enhancing classfile ...
    [java] JDO ENHANCER: scanning class org.apache.ojb.tutorial5.Product
    [java] JDO ENHANCER: not found resource: META-INF/package.jdo
    [java] JDO ENHANCER: not found resource: WEB-INF/package.jdo
    [java] JDO ENHANCER: not found resource: package.jdo
    [java] JDO ENHANCER: not found resource: org/package.jdo
    [java] JDO ENHANCER: not found resource: org/apache/package.jdo
    [java] JDO ENHANCER: not found resource: org/apache/ojb/package.jdo
    [java] JDO ENHANCER: not found resource: org/apache/ojb/tutorial5/package.
    do
    [java] JDO ENHANCER: found resource: org/apache/ojb/tutorial5/Product.jdo
    [java] com.sun.jdori.enhancer.util.InternalError: assertion failed: cannot
    find class file for class: org/apache/ojb/tutorial5/Product
    [java] at com.sun.jdori.enhancer.util.Assertion.affirm(Unknown Source)
    [java] at com.sun.jdori.enhancer.meta.model.EnhancerMetaDataJDOModelIm
    l.declareField(Unknown Source)
    [java] at com.sun.jdori.enhancer.core.Analyzer.scanFields(Unknown Sour
    e)
    [java] at com.sun.jdori.enhancer.core.Analyzer.scan(Unknown Source)
    [java] at com.sun.jdori.enhancer.core.Controller.scan(Unknown Source)
    [java] at com.sun.jdori.enhancer.core.Controller.enhanceClass(Unknown
    ource)
    [java] at com.sun.jdori.enhancer.filter.Enhancer.enhanceClassFile1(Unk
    own Source)
    [java] at com.sun.jdori.enhancer.filter.Enhancer.enhanceClassFile(Unkn
    wn Source)
    [java] at com.sun.jdori.enhancer.Main.enhanceClassFile(Unknown Source)
    [java] at com.sun.jdori.enhancer.Main.enhanceInputFiles(Unknown Source
    [java] at com.sun.jdori.enhancer.Main.process(Unknown Source)
    [java] at com.sun.jdori.enhancer.Main.main(Unknown Source)
    [java] Fatal error while enhancing: JDO ENHANCER: An internal error occurr
    d while enhancing input class; detailed message: assertion failed: cannot find
    lass file for class: org/apache/ojb/tutorial5/Product
    [java] com.sun.jdori.enhancer.EnhancerFatalError: JDO ENHANCER: An interna
    error occurred while enhancing input class; detailed message: assertion failed
    cannot find class file for class: org/apache/ojb/tutorial5/Product
    [java] at com.sun.jdori.enhancer.filter.Enhancer.enhanceClassFile(Unkn
    wn Source)
    [java] at com.sun.jdori.enhancer.Main.enhanceClassFile(Unknown Source)
    [java] at com.sun.jdori.enhancer.Main.enhanceInputFiles(Unknown Source
    [java] at com.sun.jdori.enhancer.Main.process(Unknown Source)
    [java] at com.sun.jdori.enhancer.Main.main(Unknown Source)
    [java] aborted with errors.
    BUILD FAILED
    D:\ojb-blank\ojb-blank\build.xml:226: Java returned: 1
    Please help me asap
    bye
    Rahul S
    Senior Software Eng.
    Lionbridge Tech Pvt Ltd.

    Thanks for the suggestion. I have my iphone in an Otter Box and am not aware of getting any water in the phone. I tried cleaning out the docking opening with a toothbrush, no help. I will take your suggestion about going to Apple. Thanks again

  • Problems with enhanced podcast

    Hi,
    I have a podcast on iTunes in the music section which has many listeners.
    Currently the enhanced podcast is working fine in my iTunes locally. I created them via GarageBand, but if I upload them and refresh the xml file for iTunes and I download an episode from my iPhone, I must sync it to my iTunes before I get the picture within the link and description, very strange.
    Also, if I just want to play my episode over the iTunes Store via my iPhone the picture is not displayed correctly. There are just some fuzzy lines and that's it. This is the next problem I have to solve
    Cheers!

    Hi,
    I have a podcast on iTunes in the music section which has many listeners.
    Currently the enhanced podcast is working fine in my iTunes locally. I created them via GarageBand, but if I upload them and refresh the xml file for iTunes and I download an episode from my iPhone, I must sync it to my iTunes before I get the picture within the link and description, very strange.
    Also, if I just want to play my episode over the iTunes Store via my iPhone the picture is not displayed correctly. There are just some fuzzy lines and that's it. This is the next problem I have to solve
    Cheers!

  • Problems with enhanced retropay setup

    Hi everyone, I'm not sure why but my enhanced retropay setup is not working.
    This is what I've done:
    a.) Enabled INCIDENT_REGISTER for my legislation (SA)
    b.) Made sure all triggers are working
    c.) Created a non recurring element, Basic Salary Retro
    d.) Created a recurring element Basic Salary
    e.) Attached my retro event group to Basic Salary element. Set as default component. Added start of time end of time, Basic Salary Retro as element
    f.) Run Payroll for January 2013
    g.) Made change to basic salary
    h.) Run Retropay enhanced pdf
    At this point, there is no data in the report. Any ideas why? Please don't point me to the metalink I already tried there.
    Many Thanks,
    Igwe

    Hi Igwe,
    Its strange the steps mentioned by you is fine. Is your Basic element assiciate with salary Basis? If yes then please try the below steps and check.
    1. Change Table Event Updates for PER_PAY_PROPOSALS table
    a.Navigate: Menu option > Other Definitions > Table Event Updates
    b.Query for PER_PAY_PROPOSALS in table name field
    Add Insert, Update & delete Event type for PROPOSED_SALARY_N column and change type DATE_EARNED
    Also, Check the Table Event Updates for for the tables PAY_ELEMENT_ENTRIES_F and PAY_ELEMENT_ENTRY_VALUES_F exist for the Date_Earned Change type.
    2. Manually Regenerate the Dynamic triggers again
    Unflag the enabled and generated flag for your dyanimc triggers and save
    Re flag the enabled generated flag and save
    3.Check if all dynamic triggers for PAY_ELEMENT_ENTRIES_F, PAY_ELEMENT_ENTRY_VALUES_F and PER_PAY_PROPOSALS table exist for legislation and business group
    Rerun the report.
    Hope it helps.
    Thanks,
    Sanjay

  • Problems with enhancing 0FI_GL_4 Error R8570

    Dear Colleagues!
    I have some troubles enhancing the 0FI_GL_4 Structure.
    I did the things I have to do in RSA6 (include CI_BSIS for the field LSTAR), and I even got the extractor to work in RSA3 once! But now it does not work any more..
    I suddenly get the error message:
    "Extraction Structure includes invalid field INCLUDE with ABAP type" (R8570).
    Does anyone out there know what this means??
    Hope you can help, will certainly sign points!
    Regards Silje

    I think I found it:
    I had an append in the DTFIGL_4, in addition to the INCLUDE. So I deleted the Append and now the LSTAR filed is there and picking up data.
    But I cant seem to transport this to test! Whenever I activate the DTFIGL_4 or CI_BSIS it does not lay on a transport!
    I checked Object Directory for both, and CI_BSIS was on package ZZBW (that I am used to) but DTFIGL_4 was on another package (BWFI) and SAP was set as user. How can I transport my now well functioning datasource from dev to test?
    Silje

  • Problem with enhancing BP_HIER view BP_HIER/EOVPHierarchyTreeV

    Hi experts,
    Need some urgent help regarding enhancing of view BP_HIER/EOVPHierarchyTreeV  in component BP_HIER.
    I am facing a strange issue here.
    I enhanced the view BP_HIER/EOVPHierarchyTreeV and redefined a method EH_ONNEW_NODE.
    But when i check the TR object list , i do not see this method getting locked  in my TR.
    Still when i ported  this TR to the test system , it reflected in the system.
    But further when i tried porting the TR to the user test system, this change did not get reflected.
    Can anyone help me as to why could this be happening in only one system?
    Is it something related to any system setting at the BASIS side since it is happening only in user test system?
    Any pointers are highly appreciated.
    Thanks
    Swapna V.

    Hi Bhushan,
    Will this work around work when the view class itself is standard and not getting enhanced due to this issue?
    I had enhanced the view and the method and tried porting it in  a new TR again. But that also did not work.
    The IMPL,CTXT classes got locked in the TR , but the EH_ONNEW_NODE method was not locked in the TR somehow.
    Ideally waht i have seen is like , when ever protected section of a view controller class is modified, it gets locked into your TR object list .But here , i dont see even that. Also , the method is missing in the object list.
    Shown below is the object list in my TR :
    Page/Controller of a BSP Application
         ZBP_HIER                      EOVPHIERARCHYTREEV.DO
         ZBP_HIER                      EOVPHIERARCHYTREEV.HTM
    Class (ABAP Objects)
         ZL_BP_HIER_EOVPHIERARCHYT_IMPL
         ZL_BP_HIER_HIERARCHYTREEV_CTXT
    Table Contents
         BSPWD_CMP_C_REPL
             ZENHANCEMENT_SET       BP_HIER                       BP_HIER
    Thanks
    Swapna.

  • Problem with enhancement packages selection

    Mrs.
    I want to install SAP EHP4 on my ecc 6.0! when i'm traying to create de Maintenance Optimizer Transaction in the step 2 "Select files" on Calculate download files automatically should appear Maintance and Ehancement packages installation, but only appears Mainteance.
    Could someone help me please
    Thanks everyone!
    Carlos C.

    'should appear Maintance and Ehancement packages installation, but only appears Mainteance'
    The Remote system for which you are trying to download/calculate the files might not be configured as ERP 6.0 type of System in SMSY. I guess, currently it is ECC 6.0 in SMSY, that's why you do not get EHP option there in MOpz.
    Please check and confirm, if this is the case then you have to change the system details to ERP

  • ThinkPad Bluetooth with Enhanced Data Rate Software Problem

    I'm having a weird issue. I use a X200t tablet with Windows 7 Profession 64-bit.
    Apparently my current "ThinkPad Bluetooth with Enhanced Data Rate Software" is Version. 6.2.1.2900.
    Thinkvantage System Update wants me to download and install Version 6.2.1.3100.
    However, it tries and I get Error 1935 and it rolls back. Now when I start windows I get an alert about BTTray.exe not loading.
    Of course I searched this problem, but it seems to be some ancient thing (years old) and I've never had a problem before with any of the Bluetooth updates.
    I did notice that in past versions people said when they tried to uninstall the old version and install the new one, it just wiped their hard drive. I don't want to risk that so I thought I'd check here if anyone knew what was going on.
    Thanks!

    Hi
    Welcome to Lenovo Community
    You can directly download and install this package . It will not do any harm to any other component of Operating System
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-70042
    Hope This Helps
    Cheers!!!

  • Problems with the Blackberry enhanced Gmail plug-in

    Hi.
    I use my Curve 8900 with a BES email account and added to this today a second Gmail account with support of the Blackberry enhanced Gmail plug-in.
    But this works not fine, I can not see the sent messages in the Gmail conversations, they simply disapeare after they have been sent (and they have been sent really). The same is with the sent message flag - if I filter this flag, I see no messages, but in the reality they are there. If I look in the sent message folder in my Gmail account from the computer, I see all the sent messages.
    Does anybody else have the some experience with the Gmail enhanced plug-in?
    Please, help me.
    Thanks a lot
    Robert

    I have problems with the gmail plug-in as well.  I have a bb 9700 bold and very often my gmail emails don't arrive in the email inbox.  They do arrive in the message box (the one that has everything including phone calls, sms, etc.) but the icon that is just reserved for my gmail emails do not receive them correctly.  Nobody is able to help me to figure out what is causing this; neither blackberry support or my telephone service provider.  Also sometimes once I read a mail, it vanishes from the inbox as well.  very strange...

  • Problem with htmldb 2 (Sorry APEX)!

    I installed htmldb 2 on a windows XP, Oracle 10gR1 (which has enhanced by companion CD downloaded form Oracle's site). Everything went OK but when I want to connect to it by this url: http://localhost:7777/pls/htmldb it takes my username,pass but says:
    "Service Temporarily Unavailable
    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
    Oracle-HTTP-Server/1.3.28 Server at localhost Port 7777"
    I noticed many differences between my installed Apache and documents of htmldb. I run a 9.0.4.0.0 Apache server and the dads.conf and httpd.conf are as following:
    # ============================================================================
    # mod_plsql DAD Configuration File
    # ============================================================================
    # 1. Please refer to dads.README for a description of this file
    # ============================================================================
    # Note: This file should typically be included in your plsql.conf file with
    # the "include" directive.
    # Hint: You can look at some sample DADs in the dads.README file
    # ============================================================================
    Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
    <Location /pls/htmldb>
    SetHandler pls_handler
    Order deny,allow
    Allow from all
    AllowOverride None
    PlsqlDatabaseUsername HTMLDB_PUBLIC_USER     
    PlsqlDatabasePassword @BI+fAonVS+7xU8G04irVINWznM6s+A9fuQ==
    PlsqlDatabaseConnectString chagh
    PlsqlDefaultPage htmldb
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDocumentPath docs
    PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
    PlsqlAuthenticationMode Basic
    PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
    </Location>
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://www.apache.org/docs/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # After this file is processed, the server will look for and process
    # E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/srm.conf and then E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "E:\oracle\product\10.1.0\Companion\Apache\Apache" will be interpreted by the
    # server as "E:\oracle\product\10.1.0\Companion\Apache\Apache/logs/foo.log".
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which Apache.exe is located
    # will be used by default. It is recommended that you always supply
    # an explicit drive letter in absolute paths, however, to avoid
    # confusion.
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    ServerType standalone
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache"
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile logs/httpd.pid
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you'll know because
    # this file will be created when you run Apache) then you must ensure that
    # no two invocations of Apache share the same scoreboard file.
    ScoreBoardFile logs/httpd.scoreboard
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #ResourceConfig conf/srm.conf
    #AccessConfig conf/access.conf
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # SendBufferSize: controls setsockopt() call made to set send buffer size on
    # all sockets. Default OS value on most Windows platforms is too small.
    # Larger values can help if the average page size served by OHS is
    # large (~64 k)
    SendBufferSize 16384
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    # Apache on Win32 always creates one child process to handle requests. If it
    # dies, another child process is created automatically. Within the child
    # process multiple threads handle incoming requests. The next two
    # directives control the behaviour of the threads and processes.
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn't really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For Win32, set this value to zero (unlimited)
    # unless advised otherwise.
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    MaxRequestsPerChild 0
    # Number of concurrent threads (i.e., requests) the server will allow.
    # Set this value according to the responsiveness of the server (more
    # requests active at once means they're all handled more slowly) and
    # the amount of system resources you'll allow the server to consume.
    ThreadsPerChild 50
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    #MinSpareServers 5
    #MaxSpareServers 20
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    #MaxClients 150
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    #Listen 3000
    #Listen 12.34.56.78:80
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #BindAddress *
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Please read the file README.DSO in the Apache 1.3 distribution for more
    # details about the DSO mechanism and run `apache -l' for the list of already
    # built-in (statically linked and thus always available) modules in your Apache
    # binary.
    # Note: The order in which modules are loaded is important. Don't change
    # the order below without expert advice.
    # Example:
    # LoadModule foo_module libexec/mod_foo.dll
    LoadModule mime_magic_module      modules/ApacheModuleMimeMagic.dll
    LoadModule mime_module          modules/ApacheModuleMime.dll
    LoadModule dbm_auth_module     modules/ApacheModuleAuthDBM.dll
    LoadModule digest_auth_module     modules/ApacheModuleAuthDigest.dll
    LoadModule anon_auth_module      modules/ApacheModuleAuthAnon.dll
    LoadModule cern_meta_module      modules/ApacheModuleCERNMeta.dll
    LoadModule digest_module      modules/ApacheModuleDigest.dll
    LoadModule expires_module      modules/ApacheModuleExpires.dll
    LoadModule headers_module      modules/ApacheModuleHeaders.dll
    LoadModule proxy_module      modules/ApacheModuleProxy.dll
    LoadModule speling_module      modules/ApacheModuleSpeling.dll
    LoadModule status_module      modules/ApacheModuleStatus.dll
    LoadModule info_module          modules/ApacheModuleInfo.dll
    LoadModule usertrack_module      modules/ApacheModuleUserTrack.dll
    LoadModule vhost_alias_module     modules/ApacheModuleVhostAlias.dll
    LoadModule agent_log_module     modules/ApacheModuleLogAgent.dll
    LoadModule referer_log_module     modules/ApacheModuleLogReferer.dll
    LoadModule perl_module      modules/ApacheModulePerl.DLL
    LoadModule fastcgi_module      modules/ApacheModuleFastCGI.dll
    LoadModule onsint_module      modules/ApacheModuleOnsint.dll
    LoadModule wchandshake_module     modules/ApacheModuleWchandshake.dll
    ClearModuleList
    AddModule mod_so.c
    AddModule mod_onsint.c
    AddModule mod_mime_magic.c
    AddModule mod_mime.c
    AddModule mod_access.c
    AddModule mod_auth.c
    AddModule mod_negotiation.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    AddModule mod_userdir.c
    AddModule mod_alias.c
    AddModule mod_env.c
    AddModule mod_log_config.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    AddModule mod_setenvif.c
    AddModule mod_isapi.c
    AddModule mod_vhost_alias.c
    AddModule mod_log_referer.c
    AddModule mod_log_agent.c
    AddModule mod_auth_anon.c
    AddModule mod_auth_dbm.c
    AddModule mod_auth_digest.c
    AddModule mod_cern_meta.c
    AddModule mod_digest.c
    AddModule mod_expires.c
    AddModule mod_headers.c
    AddModule mod_proxy.c
    AddModule mod_speling.c
    AddModule mod_info.c
    AddModule mod_status.c
    AddModule mod_usertrack.c
    AddModule mod_perl.c
    AddModule mod_fastcgi.c
    AddModule mod_wchandshake.c
    <IfDefine SSL>
    LoadModule ossl_module      modules/ApacheModuleOSSL.DLL
    </IfDefine>
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # Port: The port to which the standalone server listens. Certain firewall
    # products must be configured before Apache can listen to a specific port.
    # Other running httpd servers will also interfere with this port. Disable
    # all firewall, security, and other services if you encounter problems.
    # To help diagnose problems use the Windows NT command NETSTAT -a
    Port 7777
    Listen 7777
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    ServerAdmin [email protected]
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    ServerName localhost
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs"
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs">
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    Options Indexes FollowSymLinks MultiViews
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    # Under Win32, we do not currently try to determine the home directory of
    # a Windows login, so a format such as that below needs to be used. See
    # the UserDir documentation for details.
    <IfModule mod_userdir.c>
         UserDir "E:\oracle\product\10.1.0\Companion\Apache\Apache\users\"
    </IfModule>
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    <IfModule mod_dir.c>
    DirectoryIndex index.html
    </IfModule>
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    AccessFileName .htaccess
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    </Files>
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #CacheNegotiatedDocs
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    UseCanonicalName On
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    <IfModule mod_mime.c>
    TypesConfig conf/mime.types
    </IfModule>
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # mod_mime_magic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include mod_mime_magic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    <IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"
    # LogLevel: Control the number of messages logged to the error.log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    # Alternate "common" format to use when fronted by webcache:
    # LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
    # When webcache is forwarding requests to OHS, %h becomes the IP of
    # the originating webcache server and the real client IP is stored
    # in the ClientIP header. The common_webcache format can be used
    # in place of the common format when using webcache but with one
    # important caveat: if clients are capable of bypassing webcache
    # then it is possible to spoof the client IP by manually setting
    # the ClientIP header so the %h field should be monitored in such
    # an environment. Another alternative to specifying the ClientIP
    # header directly in a LogFormat is to use the "UseWebCacheIp"
    # directive:
    # UseWebCacheIp On
    # When this is specified, %h is derived internally from the ClientIP
    # header and the access log format does not need to be modified.
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog logs/referer.log referer
    #CustomLog logs/agent.log agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog logs/access.log combined
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On
    # Apache parses all CGI scripts for the shebang line by default.
    # This comment line, the first line of the script, consists of the symbols
    # pound (#) and exclamation (!) followed by the path of the program that
    # can execute this specific script. For a perl script, with perl.exe in
    # the C:\Program Files\Perl directory, the shebang line should be:
    #!c:/program files/perl/perl
    # Note you mustnot_ indent the actual shebang line, and it must be the
    # first line of the file. Of course, CGI processing must be enabled by
    # the appropriate ScriptAlias or Options ExecCGI directives for the files
    # or directory in question.
    # However, Apache on Windows allows either the Unix behavior above, or can
    # use the Registry to match files by extention. The command to execute
    # a file of this type is retrieved from the registry by the same method as
    # the Windows Explorer would use to handle double-clicking on a file.
    # These script actions can be configured from the Windows Explorer View menu,
    # 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
    # button allows you to modify the Actions, of which Apache 1.3 attempts to
    # perform the 'Open' Action, and failing that it will try the shebang line.
    # This behavior is subject to change in Apache release 2.0.
    # Each mechanism has it's own specific security weaknesses, from the means
    # to run a program you didn't intend the website owner to invoke, and the
    # best method is a matter of great debate.
    # To enable the this Windows specific behavior (and therefore -disable- the
    # equivilant Unix behavior), uncomment the following directive:
    #ScriptInterpreterSource registry
    # The directive above can be placed in individual <Directory> blocks or the
    # .htaccess file, with either the 'registry' (Windows behavior) or 'script'
    # (Unix behavior) option, and will override this server default option.
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    <IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/"..
    Alias /jservdocs/ "E:\oracle\product\10.1.0\Companion\Apache\Jserv\docs/"
    Alias /javacachedocs/ "E:\oracle\product\10.1.0\Companion\javacache\javadoc/"
    Alias /icons/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\icons/"
    Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
    <Directory "icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    <IfModule mod_perl.c>
         Alias /perl/ "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin/"
    </IfModule>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin/"
    # "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    </IfModule>
    # End of aliases.
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    # Directives controlling the display of server-generated directory listings.
    <IfModule mod_autoindex.c>
    # FancyIndexing is whether you want fancy directory indexing or standard
    # Note, add the option TrackModified to the IndexOptions default list only
    # if all indexed directories reside on NTFS volumes. The TrackModified flag
    # will report the Last-Modified date to assist caches and proxies to properly
    # track directory changes, but it does not work on FAT volumes.
    IndexOptions FancyIndexing
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found. If name.html
    # doesn't exist, the server will then look for name.txt and include
    # it as plaintext if found.
    ReadmeName README
    HeaderName HEADER
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    </IfModule>
    # End of indexing directives.
    # Document types.
    <IfModule mod_mime.c>
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbriviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    AddLanguage ar .ar
    AddLanguage da .dk .da
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fi .fi
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage es .es_ES .es
    AddLanguage he .he .iw
    AddLanguage hu .hu
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage ko .ko
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt_BR .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage sk .sk
    AddLanguage sv .sv
    AddLanguage th .th
    AddLanguage tr .tr
    AddLanguage cz .cz .cs
    AddLanguage ro .ro
    AddLanguage ru .ru
    AddLanguage zh-cn .zh_CN
    AddLanguage zh-tw .zh_TW
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    <IfModule mod_negotiation.c>
    LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
    </IfModule>
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    # For example, the PHP 3.x module (not part of the Apache distribution - see
    # http://www.php.net) will typically use:
    #AddType application/x-httpd-php3 .php3
    #AddType application/x-httpd-php3-source .phps
    # And for PHP 4.x, use:
    #AddType application/x-httpd-php .php
    #AddType application/x-httpd-php-source .phps
    AddType application/x-tar .tgz
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    # To use CGI scripts:
    #AddHandler cgi-script .cgi
    # To use server-parsed HTML files
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml
    AddType text/xml xbl
    AddType text/x-component htc
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #AddHandler send-as-is asis
    # If you wish to use server-parsed imagemap files, use
    #AddHandler imap-file map
    # To enable type maps, you might want to use
    #AddHandler type-map var
    </IfModule>
    # End of document types.
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #MetaDir .web
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #MetaSuffix .meta
    # Customizable error response (Apache style)
    # these come in three flavors
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (") marks it as text, it does not get output
    # 2) local redirects
    #ErrorDocument 404 /missing.html
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    # 3) external redirects
    #ErrorDocument 402 http://some.other_server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will not be available to such a script.
    # Customize behaviour based on the browser
    <IfModule mod_setenvif.c>
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    # End of browser customization directives
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your_domain.com" to match your domain to enable.
    <Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from localhost localhost localhost
    </Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your_domain.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    #</Location>
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phf_abuse_log.cgi.
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    # ProxyRequests On
    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    # </Directory>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    # ProxyVia On
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    # CacheRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a_domain.com another_domain.edu joes.garage_sale.com
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *
    #NameVirtualHost 12.34.56.78:80
    #NameVirtualHost 12.34.56.78
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/dummy-host.example.com
    # ServerName dummy-host.example.com
    # ErrorLog logs/dummy-host.example.com-error_log
    # CustomLog logs/dummy-host.example.com-access_log common
    #</VirtualHost>
    #<VirtualHost default:*>
    #</VirtualHost>
    SetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
    <IfModule mod_perl.c>
    # Perl Directives
    # PerlWarn On
    # PerlFreshRestart On
    # PerlSetEnv PERL5OPT Tw
    # PerlSetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
    PerlModule Apache
    # PerlModule Apache::Status
    PerlModule Apache::Registry
    # PerlModule Apache::CGI
    # PerlModule Apache::DBI
    # PerlRequire
    <Location /perl>
    SetHandler perl-script
    PerlHandler Apache::Registry
    AddHandler perl-script .pl
    Options +ExecCGI
    PerlSendHeader On
    </Location>
    # <Location /perl-status>
    # SetHandler perl-script
    # PerlHandler Apache::Status
    # order deny,allow
    # deny from all
    # allow from localhost
    # </Location>
    </IfModule>
    #Protect WEB-INF directory
    <DirectoryMatch /WEB-INF/>
    Order deny,allow
    Deny from all
    </DirectoryMatch>
    # Setup of FastCGI module
    <IfModule mod_fastcgi.c>
    Alias /fastcgi/ "E:\oracle\product\10.1.0\Companion\Apache\fastcgi/"
    ScriptAlias /fcgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin/"
    <Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin">
         AllowOverride None
         Options None
         Order allow,deny
         Allow from all
         SetHandler fastcgi-script
         <IfModule mod_ossl.c>
         SSLOptions +StdEnvVars
         </IfModule>
    </Directory>
    </IfModule>
    # Include the configuration for Apache JServ 1.1
    #include "E:\oracle\product\10.1.0\Companion\Apache\Jserv\conf\jserv.conf"
    # Setup of oprocmgr module.
    # This directive identifies each remote apache instance that will be
    # sending requests to processes (e.g., JServs), managed by local Apache
    # instances. This directive is used by the local process manager to share
    # routing information with remote apache instances via non-SSL HTTP messages.
    # The directive is repeated for each remote apache instance that will be
    # sending requests. The ProcNode directive that refers to the local apache
    # instance will be ignored, but may be supplied to facilitate uniformity
    # in configuration across apache instances. Arguments to the ProcNode must
    # be sufficient to reach the remote instance of apache via non-SSL HTTP
    # messages. It is not considered an error if the remote apache instance is
    # unreachable, as no assumption is made about the starting order or
    # availability of apache instances.
    # Syntax: ProcNode <hostname> <port>
    # Example: ProcNode abc.com 7777
    <IfModule mod_oprocmgr.c>
    <Location /oprocmgr-service>
    SetHandler oprocmgr-service
    Order deny,allow
    Deny from all
    Allow from localhost localhost localhost
    </Location>
    <Location /oprocmgr-status>
    SetHandler oprocmgr-status
    Order deny,allow
    Deny from all
    Allow from localhost localhost localhost
    </Location>
    </IfModule>
    # Include the mod_oc4j configuration file
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_oc4j.conf"
    # Include the mod_dms configuration file
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\dms.conf"
    # Loading rewrite_module here so it loads before mod_oc4j
    LoadModule rewrite_module      modules/ApacheModuleRewrite.dll
    # Include the SSL definitions and Virtual Host container
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\ssl.conf"
    # Include the mod_osso configuration file
    #include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_osso.conf"
    # Include the Oracle configuration file for custom settings
    include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\oracle_apache.conf"
    ------------------------------------------------------------------------------------------------------------------

    Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
    Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
    Secondly, I'm confused by your comment -
    I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
    Thirdly, I notice from your config file -
    ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed?

Maybe you are looking for