Problem with "Epson Stylus SX115 (SX115 like)" and the Airport Express

Hello,
I connect my printer on my airport express, via wifi connection. And the airport express doesn't recognize the printer (via the airport express utility)
When I connect my previous printer (a canon), it works well.
Thanks if you met this pb, to help me=

Hello,
I connect my printer on my airport express, via wifi connection. And the airport express doesn't recognize the printer (via the airport express utility)
When I connect my previous printer (a canon), it works well.
Thanks if you met this pb, to help me=

Similar Messages

  • Problem with "Epson Stylus SX110 (or SX115)" and the Airport Express

    Hello,
    I connect my printer on my airport express, via wifi connection. And the airport express doesn't recognize the printer (via the airport express utility)
    When I connect my previous printer (a canon), it works well.
    Thanks if you met this pb, to help me

    Hi All,
    I have intel based macbook pro running OSX 10.6.2, airport express with a connected EPSON Stylus SX115.
    I discovered two issues with using the printer via my Airport Express:
    1. I had to use the driver called 'Epson Stylus SX 100'. It ships with the op system. (note: NOT the 'Epson SX 100' !!! There is also one called like that, but it does not work for me...). When I tried to use the sx 110 driver, the printing stopped half way. Strange enough the sx 110 driver works ok when the printer is connected via a USB cable
    2. Now the more annoying problem.
    It takes ages before the airport express discovers the printer!!! After I scanned via an USB cable, I reconnected the printer to the Airport express. Printing was dead. Next I followed the Apple provided troubleshooting (restart sequence, etc). No success, the airport still couldn't find the connected printer, so I was getting really ******…..
    The solution I propose, as it worked for me already more than once on my macbook pro, is the following:
    1. Connect the printer to the Airport Express, switch the printer on and, and restart AE via the AE utility (Just to make your consciousness rest.):
    - Start Airport Utility: you can find the program by typing the name in spotlight
    - right click on the on the Icon of your Airport Express on the right of the window
    - Issue a restart (It takes some seconds to complete!)
    2. WAIT! As annoying it is, it takes about 15-30 min before Airport express discovers the printer.
    3. In System Preferences/Print&Fax add the printer: (NOTE: This is an optional step, in case the printer is set up the first time, otherwise skip to step 5. )
    - On the right, at the bottom of the Printers sub window, click on the + sign. This opens the Add Printer dialogue
    - In the Add Printer dialogue you should be able to see now your Epson printer discovered by Bonjour. Highlight it by clicking on it. (If you don't see your printer, you might have been impatient and waited to little after you connected the printer to the airport express, or you have some problem I did not have…)
    - At the bottom open the 'Print Using:' drop-down box, and choose the 'Select Printer' option. This opens a new dialogue. Scroll down to 'Epson Stylus SX 100 - Gutenprint v5.2.3'. Click on it, and press OK. This closes the 'Select Printer' dialogue
    - Back at the Add Printer dialogue, change the name of your printer to something more meaningful, to 'Epson SX 115 - Wireless' for example.
    - click ad
    4. Back at the Print & Fax dialogue, now you should see a new printer icon on the left with the name you just gave, and with an icon that does not look at all like your printer.
    5. Congratulations, you are done. You should be able to print now.
    I hope it helps

  • Problems with Epson Stylus 3000 IP Ethernet

    Problems with Epson Stylus 3000 IP Ethernet
    The printer stops processing after reaching 1,72% of printing.
    The Ethernet Cards led is on and blinking green.
    I am running
    Powerbook G4
    OSX 10.4.5
    Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
    I can se the printer in Epson MacAssist for OSX Ver 4.0.aE IP 10.0.0.6
    I can se it as well in Safari under the ip adress 10.0.0.6
    I have tried to test the printer in the Common Unix Printing System
    I can see the printer there as well.
    A test print here results in
    "ipp" stopped unexpectedly with status 1
    All my other printers work well and prints test sheets.
    The printer has not worked since Tiger.

    Can you please help me....
    I can't seem to get the Print Set up utility to find the Epson Stylus 3000 Gimp.
    I installed the GimpPrint Drivers that were on the Tiger 10.4.3 install DVD after I installed 10.4.3, and then updated 10.4.3 to 10.4.5.
    When I first installed 10.4.3, I didn't install the GimpPrint Drivers. I went back to the DVD after updating to 10.4.5, and then installed the GimpPrint Drivers.
    Can you please help me out in what I'm doing wrong. Everytime I try to find the Epson Drivers an "error:-50" comes up in the Printer Browser under IP Printer section.
    Here's what I'm doing:
    - I go into Printer Setup Utility
    - I choose Add Printer
    - I choose IP Printer
    - I choose Line Printer Daemon - LPD
    - I pop up the "Print using" and select the "EPSON".
    - Then I choose "EPSON Stylus Color 3000 - Gimp-Print v5.0.0-beta2
    - THEN I GET AN ERROR MESSAGE POP-UP! "An error occurrd while trying to add the selected printer. Error:-50"
    Where did you find the:
    Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
    Thank you for you help in advance!
    Micdim
    G4 Dual 1.42 gig   Mac OS X (10.4.5)   1G Ram, FCStudio, Logic Pro 7.1, Adobe CS2, After Effects 7, MSOffice 2004...

  • TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

    With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

    Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad.  Pay real close attention to the outgoing server name, and port.  You may need to change in on the pad. 

  • HT1338 has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    Have you tried calling Apple tech support?
    http://www.apple.com/contact/

  • I have an iPad 2 connected to airport express so that I can play and change music whilst I am teaching ballet class. Recently, I keep losing connection and the airport express gets quite hot. I have alway used Archos but changed to Apple for reliability!

    I have an ipad 2 with airport express that I use to play and change music whilst teaching ballet class. Recently, I keep losing connection and the airport express appears to be getting quite hot. I did use Archos but changed to Apple for reliabilty! Can anyone help or should I just buy a new airport express.

    I agree that it's probably interference. Only other possibility, since you mentioned it, it overheating. Is the express situated so that it is well ventilated? That is to say, not buried under other equipment and laying on its side? What does the status light do when you lose connection?
    CB

  • Which airport is good to extend my wifi, what is the difference between the AirPort Extreme and the airport express base sstation

    What is the difference between the AirPort Extreme and the airport express base station and which one can extend my wifi router.

    With rare exceptions of a few older routers, neither one can extend a non-Apple router's network wirelessly - they are not designed that way - but you can extend the wireless network if the Extreme is hardwired to the router or you can connect wirelessly and join the network as an access point that will provide remote ethernet access but not produce or extend the wireless signal - here is a comparison of the Apple base stations - http://www.apple.com/wifi/

  • What is the difference between the airport extreme and the airport express?

    What's the real difference between the airport extreme and the airport express except for the price and the size? Does one transmit with more range?

    Range is about the same, maybe a bit better on the Extreme, which has better antennas.
    The AirPort Exreme has Gigabit (1,000 Mpbs) Ethernet ports and the USB port will support a hard drive.
    The Express has 10/100 (up to 100 Mpbs) Ethernet ports, and will not support a hard drive at the USB port.
    The Express has audio capability for AirTunes while the Extreme does not.
    If you don't need to connect a hard drive and don't need the faster Ethernet ports, the Express is a good value.
    All the details here:
           Compare Apple Wi-Fi base stations          AirPort Express    AirPort Extreme    Time Capsule    

  • HT5022 Is it true that Airport Express Utility 5.6 is not compatible with OS 10.8.2, even though the Airport Express Utility 6.2 that I have is said to be incompatible with my Express?

    I've been having a problem with needing to reset my older Airport Express once or twice a week, and I thought that I'd check my settlings and possibly get any updates available.  I'm told when I try to use my current version of Airport Express Utility (6.2) that I need to unstall the older Airport Expess Utility 5.6.  But when I tried to install Utility 5.6, I was told that it was not compatible with my operating system.  Is it possible that under 10.8.2, I no longer have an usable Airport Utility program available?

    Welcome to the Apple Support Communities
    Although OS X Mountain Lion comes with AirPort Utility 6, AirPort Utility 5.6 is perfectly compatible. Follow these steps:
    1. Download AirPort Utility 5.6 > http://support.apple.com/kb/DL1482 if you have downloaded it yet, ignore this step.
    2. Open Terminal and type:
    cd ~/Downloads && pkgutil --expand ./AirPortUtility56.pkg ~/Downloads/AirPortUtility56 && gunzip -c<./AirPortUtility56/AirPortUtility56Lion.pkg/Payload | sudo tar -C / -xvf - "./Applications/Utilities/AirPort Utility 5.6.app"
    3. Open Finder, go to Utilities folder and open “AirPort Utility 5.6” to set up the AirPort Express

  • Can i sync my ATV with IMac, if they are connected by the airport express?

    My IMac is connected to Airport Express and the ATV is connected to Airport Express too, is it possible to sync them? I can't find ATV in ITunes

    sure, it shows me digits, but i could not find where i can place them.
    But i found where, in devices menu
    THX
    Message was edited by: Nikoloz Nikolaishvili

  • Got Cable DSL and the airport express won't transmit

    Admittedly, I'm a novice. I had Verizon internet until yesterday. all was dandy and I hooked it up all on my lonesome.
    Moved today and trying to hook up the Time Warner Cable/Internet and can't get the airport to work.
    The service works because if I hook it directly into my computer's ethernet I get a connection. But even after running the application to set up my airport I can't get the computer to read the ethernet connection thorugh my airport extreme.
    Couple of other wonky things: I can't seem to re-configure my airport because every time I try, after providing the correct password, it tells me there is an error in reading the configuration.
    I have odne a hard reset by presisng the reset button for ten seconds.
    I have turned off my firewall (I think) and have the internet sharing on.
    Driving me crazy: seems the airport just won't transmit the signal.
    Perhaps I need a DHCP address from the Provider? They told me I didn't.
    Any suggestions.... please?
    powerbook G4   Mac OS X (10.2.x)  

    Since you have changed modems (DSL to Cable), make sure you do a completer power recycle of your network components...
    Modem/Router Power ReCycling
    - Power-off the Cable modem & AEBS. (Wait for at least 30 minutes. If possible, leave the modem off overnight.)
    - Power-on the Cable modem; Wait at least 30 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Try connecting to the Internet. If still unsuccessful, continue...
    Perform a "hard" reset of the AEBS.
    - (ref: http://docs.info.apple.com/article.html?artnum=107451)
    Setup the AEBS for High-Speed Cable Service
    Using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, check these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - AirPort Network Name: <whatever you wish or use the default>
    - Create a closed network (unchecked)
    - Wireless Security: Not enabled
    - Channel: Automatic
    - Mode: 802.11b/g Compatible
    Internet tab
    - Connect Using: Ethernet
    - Configure: Using DHCP
    - WAN Ethernet Port: Automatic
    Network tab
    - Distribute IP addresses (checked)
    - Share a single IP address (using DHCP & NAT) (enabled)

  • HOWTO: Linux Audio Players and the Airport Express (Airtunes)

    Hi,
    I've written a description on how I got amaroK (Linux audio player) to stream audio to my Apple Airport Express (Airtunes):
    http://www.jroller.com/page/nwinkler?entry=amarokand_the_airportexpress
    Nils
    Other OS Fedora Core Linux

    Here is a link comparing all of the Express versions - http://en.wikipedia.org/wiki/AirPort_Express
    Here is an article on Airtunes vs Airplay - http://answers.oreilly.com/topic/2169-apples-airplay-what-it-is-and-how-its-diff erent-from-airtunes/

  • Activation problems with Apple TV 3 rd gen and the latest version of YouTube for Apple TV

    Since the latest version of YouTube for Apple TV you need to connect your iPhone Youtube account to your Apple TV for Youtube to use a personal account. It does this through youtube.com/activate. I have two Apple TV and have implemented the process the same on both. After that, everything works fine in about 12 hours, or as long as the Apple TV is "awake". Then, randomly, I have to once again carry out the activation process to use my personal Youtube account on my Apple TV. I consider this to be a big failure and a clear deterioration of YouTube for Apple TV. Does it really have to be this way? Why does my Apple TV forget the "pairing"? All of my devices (iPhone 5, Apple TV gen 3, latest software) are on the same wireless network.

    I don't have an answer for this, unfortunately. I've even had my Apple TV replaced (yesterday), and after about an hour of normal operation, it now fails to connect to servers, or connects intermittently and poorly, and it can no longer connect to the iOS Remote app. These are the exact symptoms that prompted the Genius Bar to replace the original unit.
    Either there is a basic flaw in Apple TV, or I'm extremely unlucky. All my other Mac and iOS devices have positively no network problems. Very frustrating.
    WiFi is provided by a late-model AirPort Extreme.

  • Problems with Itunes 11.1.5.5 and the pop up windows.

    Hi. First post here. Is anyone else having issues within Itunes where the pop up windows (such as get info or get album artwork) are layered behind the Itunes window? I have to reduce the window size and drag Itunes window to the lower corner of the screen to see the editing window and select it to show on top. Shouldn't it pop up on top of the window automatically? The right click context menu does, so it would seem to me that this is an issue within Itunes and not Windows 8.1. Any help would be greatly appreciated, as this is quite frustrating. Thanks

    Ok, just figured out how to get rid of AMDS... go to control panel...click on AMDS....choose REPAIR ,let it run through. if you see IGNORE pop up, hit it...it asked me 3 times i hit ignore 3 times. when it is done, go back now and choose to UNINSTALL it. this worked for me.....still cant download itunes though

  • Poor network speed with 1st generation time capsule and multiple airport express 5Ghz. My network speed slows to a crawl when not close to the time capsule. I get the range that I need, but the speed is painfully slow.

    Hello,
    I have a first generation time capsule running 802.11n (b/g compatable) and the airport expresse's are the newer 5ghz models. I have 3 airport express's and I have the range that I need. I can run the time capsule using 802.11n 5ghz, but I loose the range and can't connect to all of the airport express's. My computers and mobile devices run 802.11n. Does anyone have any suggestions on how to increase the network speed. Would the new airport extreme fix the problem?
    Thank you

    Unfortunately, you are experiencing one of the downsides to 5 GHz. That's because the higher frequency 5 GHz signals are much weaker than 2.4 GHz signals.
    After all, you always have to give up something to gain something else. In the case of 5 GHz, you gain potential speed but in return, you must give up penetration power and distance capability.
    In order to work well, 5 GHz signals need to almost have a line-of-sight relationship between devices. Unless you can achieve this, you will do much better to leave the Time Capsule running at the 802.11n (b/g compatible) 2.4 GHz Radio Mode and allow the Express devices to "extend" that network.
    As for the location of the AirPort Express devices in an exended network, that is critical for best performance. That's because the Express can only "extend" the quality and bandwidth of the signal that it receives. Post back if you need a few more tips on how to find the best location for the AirPort Express devices.
    Would the new airport extreme fix the problem?
    Unfortunately, no.

Maybe you are looking for