Problem with ERP User Role: Cant do Bank Reconciliation using SM35 Pls help

Hi Everyone,
I'm having soem problems. A user can upload the electronic bank statement (MT940 format) using FF_5 however when they attempt to process it using SM35 the file is not there.
I think we might be missing an authorisation object or something that stops the bank file from being transported to the processing function SM35 but I dont know what the missing object is or how to correct it.
If you can help - please do!
Many many thanks!
Ciara

Hi Andrew,
I'm able to run the programs as I have access to SAP ALL, I traced myself running the program (ST01) but cant make sense of the report to work out what's missing.
I'll try running the same trace for the user that is mising the authorisation objects to see what the difference is.
Thanks so much for your response - you obviously understood my question!
Much appreciated
Ciara

Similar Messages

Charm: BP problem with the user

Hi!
I have problem with the user for the usage of ChaRM.
When I try to set the the (urgent) correction in Development i get the following error.
There is no valid business partner assigned to your user.
Meanwhile the appropriate BP-entry for the user exists:
External BP number: <SID> <CLNT> <user name>
Identification number: <SID> <installation number> <user name>
Furthermore I have the following error, when I try to approve the change request:
Partner 141 (Change-Manager) is neither an employee nor an organizational unit
I would be great to get some help here.
Thank you
regards
Thom

Hi Thomm,
1. There is no valid business partner assigned to your user.
In BP under identification tab,
ID type idenification number
CRM001 <SID> <installation number><CLNT><username>
2.Partner 141 (Change-Manager) is neither an employee nor an organizational unit
Assign the BP role as "Employee" for Change Manager
regards
Naveen

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

Sql Devloper 4.0.0.13 - problems with displaying user data types

Hi,
I have installed new version of sqldeveloper and have discovered some problems with displaying user data types. The data that is described as VARCHAR2 are displayed with ‘???’.
The problem persist in table view, script output and exported files.
My type is described as follows:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
when make select column from table that contains this type I get next results:
CASE 1:
SQLDeveloper Version 3.2.20.09; Build MAIN-09.87; JDK 1.6.0_43; Windows 7 64 bit
Select:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result:
        ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'TRAIK','TURBE','BABANA','3452','0',NULL)
END CASE 1;
CASE 2:
SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_40; Windows 7 64 bit
Select1:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result1:
ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'???','???','???','???','???',NULL)
But if I select one element it is displayed normal.
Select2:
select id, a.adresalokacija.opcina
from dptr_saglasnosti a
where id = 1;
Result2:
ID ADRESALOKACIJA.OPCINA
         1 TRAVNIK
END CASE 2;
I have tried this scenario on three different pc with same output.
Pleas help me to get rid of the '???' in result.
Best Regards,
Omer

I tried on SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_45; Windows 7 64 bit; NLS setting is default
all data can show,No ??? in result
Test step as following:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
alter TYPE "DPTY_ADRESA" add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
CREATE TABLE dptr_saglasnosti (
adresalokacija        DPTY_ADRESA,
id    number);
INSERT INTO dptr_saglasnosti VALUES (
DPTY_ADRESA (65,225,'Vrinda Mills', '1-800-555-4412','sss','aaaa','eeeee','attta'),1 );
select id, adresalokacija from dptr_saglasnosti where id = 1;
ID ADRESALOKACIJA
1    HRCP.DPTY_ADRESA(65,225,'Vrinda Mills','1-800-555-4412','sss','aaaa','eeeee','attta')

Problem with"Evaluate User Policies"sch task after the upgrade OIM R1 to R2

Problem with "Evaluate User Policies" scheduled task after the upgrade from OIMg R1 to OIM 11g R2
After the upgrade process is completed we are having issue with Access policy not triggering if rule is set to custom attribute
- We had a Rule with custom attribute (Policy='Full-Time') the value gets populated by event handler which triggers the access policy in OIM 11g R1.. which worked fine in OIM R1
After the upgrade the value is getting populated but even after running "Evaluate User Policy" the Access Policy is not getting triggered.
We tested creating a rule with other custom attribute,policy does not trigger even after running Evaluate User Policy schedule Task in this case too
but if we try creating rule with OOTB attributes(Country='US') it works fine the access policy got triggered after running Evalute User Policy
One more issue we observed is
- Evaluate User Policy value usr_policy_update is not updated still set to '1' even after the Access policy got triggered (as it worked when rule is set to OOTB attribute)
I believe after the evaluate user policy gets triggered for a user it should update the value from '1' to '0')
Please let me know if you have any idea..Thanks!

well, I overcame the issue by 'fooling' the installer: on second node, change the scan ip address to point to something else (ie, different ip address to the scan in the first node, cleanup then rerun root.sh, it went past the trouble stage, then I still have problem later at the time database creation. I think scan ip address has to be setup correctly (round robin thingy)
This is how i did the cleanup before rerun root.sh
/u01/app/11.2.0/grid/crs/install/rootcrs.pl -verbose -deconfig -force

Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101

Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101# automatically calls and says "this number dows not excits",I wnat iOS 6.1.2 back ..

sorry for my bad english ..

Problem with both user and cmos password

I have problem with my user and cmos password, can formating clear the passward with remove the cmos battary.

It depends on the model. Formatting will not touch the BIOS or power on passwords but will take away the Windows user password and allow you to have a different one, but will kill all the data on the machine. Removing the CMOS battery might clear the BIOS password and power on password, but on most current laptops even that will not help. The BIOS data is on a chip that holds its contents even when all power is removed.

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or atleast maintain the charg over longer periods of time? I have a dc adapter. thanks

I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks

You should be able to use the battery if you get a car type charger which recharges mobile devices.
The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
 Cheers, Tom

HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be..

I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Problem in provisioning user from oim to active directory using ssl

hi,
problem in provisioning user from oim to active directory using ssl i am getting following error while provisioning user to AD.
15:18:12,984 ERROR [ADCS] Communication Errorsimple bind failed: 172.16.30.35:636
15:18:12,984 ERROR [ADCS] The error occured in tcADUtilLDAPController::connectTo
AvailableAD():simple bind failed: 172.16.30.35:636
15:18:13,015 ERROR [SERVER] Class/Method: tcProperties/tcProperties encounter so
me problems: Must set a query before executing
com.thortech.xl.dataaccess.tcDataSetException: Must set a query before executing
at com.thortech.xl.dataaccess.tcDataSet.checkExecute(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.util.tcProperties.<init>(Unknown Source)
at com.thortech.xl.dataobj.util.tcProperties.initialize(Unknown Source)
at Thor.API.tcUtilityFactory.getLocalUtility(Unknown Source)
at Thor.API.tcUtilityFactory.getUtility(Unknown Source)
at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.co
nnectToAvailableNextAD(Unknown Source)
at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.se
archResultPageEnum(Unknown Source)
at com.thortech.xl.schedule.tasks.ADLookupRecon.performReconciliation(Un
known Source)
at com.thortech.xl.schedule.tasks.ADLookupReconTask.execute(Unknown Sour
ce)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionActi
on.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown S
ource)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:520)
can any one help.
Thanks and Regards,
praveen,

Are you able to connect to AD over SSL through some LDAP Browser ?
Check the validity of Certificate ?
Does your certificate appear in the list ?

I'm trying to update my ipod touch but every time it downloads its fine until it processes it and it says it has a problem with my connection but my firewall is off?? Please help.

but every time i try to its fine until it processes it and then it says it has a problem with my connection but my firewall is off?? Please help.

I'm having the same problem trying to update my iphone 4(Just got a replacement), I also have firewall off...Hopefully someone can help. Mine says error -3259

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP
Hp mini 110 1140el

Yes bios password, i forgot my windows password so im trying to reset to manufacturing settings but keeps asking me for bios password... Please help

I purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

i purchased 2 weeks before i phone 5 but there is problem with sleep and wake up button its not responding can anyone help me in this issue.

You have a one-year hardware warranty & 90 days of free phone support. Take advantage of it, make an appointment at an Apple store or call AppleCare.

Problem with ERP User Role: Cant do Bank Reconciliation using SM35 Pls help

Similar Messages

Maybe you are looking for