Problem with /etc/system file

I changed /etc/system file and reboot Sun Solaris Intel (5.8)
and I got :
* IPC Semaphores module is not loaded
I did same thing on another box before and was fine. I now that I run some utility before rebooting, but I forget which one.
Can somebody help me.

Thank you very much.
That solve my problem. The problem, if I undersend well, was not in my new /etc/system file, problem was (it is not problem) because I run sysdef right after booting machine and that modul probably is not loaded yet. With forceload sysdef shows what I expected. About
some utility, probably that was something else.
Regards,
Ivan Aksentijevic

Similar Messages

Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

InDesign CS5 causing problems with InCopy assignment file but not content files

I'm having a strange InDesign/InCopy CS5 issue (Mac OSX 10.6.6; all system & Adobe updates are current). In my InDesign doc I have one assignment file containing two content files. All of the InCopy pieces work fine in InDesign (i.e., I can check out/in, edit, etc.). When I go to open the assignment file in InCopy, InCopy starts to open it but then crashes. If I try to open each content file directly in InCopy, no problem. I've tried deleting and recreating new assignments in InDesign, but they all have the same result in InCopy.
I think this actually is a problem with the InDesign file because if I export the InDesign file to IDML, then try to open the IDML file, InDesign crashes! I've trashed my InDesign preferences, made sure all cross-references are up to date, etc. Anybody have any ideas what else to look for in my InDesign file that might cause this problem?
Thanks!
Andrea

Thanks John!
1) Here are the first 10-ish lines from the crash report that is generated when I try to open the IDML file:
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   ???                               0xa0c266f0 _XHNDL_trapback_instruction + 0
1   com.adobe.InDesign.Indexing       0x20778192 GetPlugIn + 341394
2   com.adobe.InDesign.Indexing       0x20779009 GetPlugIn + 345097
3   PublicLib.dylib                   0x0129228b CScriptProvider::AccessProperties(IScriptRequestData*, IScript*) + 571
4   com.adobe.InDesign.Scripting      0x1f4befe8 GetPlugIn + 166440
5   com.adobe.InDesign.Scripting      0x1f4c2e31 GetPlugIn + 182385
6   com.adobe.InDesign.INXCore        0x20641444 GetPlugIn + 45220
7   PublicLib.dylib                   0x0142c9e8 CScriptDOMElement::GetMultipleAttributes(K2Vector<IDType<ScriptID_tag>, K2Allocator<IDType<ScriptID_tag> > > const&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > >&) + 280
8   PublicLib.dylib                   0x0142bd38 CScriptDOMElement::InsertProperties(adobe::version_1::vector<KeyValuePair<IDType<ScriptID _tag>, ScriptData>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, ScriptData> > >&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short, short) + 1336
9   PublicLib.dylib                   0x0142beab CScriptDOMElement::SetSimpleAttributes(adobe::version_1::vector<KeyValuePair<IDType<Scrip tID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short) + 91
10 PublicLib.dylib                   0x0142c0d3 CScriptDOMElement::SetAttributes(adobe::version_1::vector<KeyValuePair<IDType<ScriptID_ta g>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&) + 51
11 PublicLib.dylib                   0x0142a2ea CScriptDOMElement::SetAttribute(IDType<ScriptID_tag>, DOMAttributeValue const&) + 202
2) That works. Moved all pages (frame threading was preserved) to a new doc, exported to IDML, opened new IDML file just fine. Woo hoo! One of my editors won't be pleased that all of the tracked changes have disappeared, but at least the file functions now
Wish I knew what caused the problem in the first place so we could (hopefully) prevent this from happening again. Any ideas?
Thanks again for your help!
Cheers,
Andrea

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem with preview PDF files on Windows 7 32bit

Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.

I think I figured it out after reading other forums. Thanks!

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Problem with printing txt file

I have a problem with printing txt file. My code looks like :
String filename = something.txt";
DocFlavor flavor = DocFlavor.INPUT_STREAM.AUTOSENSE;
PrintService[] services = PrintServiceLookup.lookupPrintServices(
          flavor, null);
PrintRequestAttributeSet pras = new HashPrintRequestAttributeSet();
pras.add(PrintQuality.DRAFT);
pras.add(new Copies(1));
pras.add(MediaSizeName.ISO_A4);
pras.add(Sides.ONE_SIDED);
pras.add(Chromaticity.MONOCHROME);
PrintService service = ServiceUI.printDialog(null, 200, 200,
          services, services[0],
          null,
          pras);
if (service != null)
try
DocPrintJob job = service.createPrintJob();
FileInputStream fis = new FileInputStream(filename);
DocAttributeSet das = new HashDocAttributeSet();
Doc doc = new SimpleDoc(fis, flavor, das);
job.print(doc, pras);
Thread.sleep(10000);
catch(FileNotFoundException e)
catch(PrintException e1)
catch(InterruptedException e2)
It doesn't work :(
What is my purpose: I would like to print .txt file but I would like to get PrintDialog where I can choose PrintQuality, Chromaticity etc. I found also that I should use DocFlavor.INPUT_STREAM.TEXT_PLAIN_HOST but I don't know how.
I will be very gratefull for help :)

I tested it on 3 printers (different models of hp). 2 of them don't give me any error but when it started print priter stoped (just as it dosesn't have a paper), but 1 of them doesn't react (there were no errors), i thought tahat something was wrong with printers but when I change DocFlavor.INPUT_STREAM.AUTOSENSE to DocFlavor.GIF and filename to dog.gif it works so mybe there is another way to print txt file

Weird Problems with K9A2 System

Can Someone Help Me?
I recently built a new system and have had nothing but problems. See system config in signature (Left off OCZ PRO Xtreme 1000W Power Supply With 4 12 Vrails at a max of 26 Amps each or 82 Amp all together and a 5 Volt rail at 30 Amps Max.) After putting it all (except the seagate 250 IDE drive), system would not even enter post. After strippin memory down to just 2 GB system finally entered post (although my memory were the same models from G.Skill one set was older and one set was new they had different voltages old required 1.9-2.0 while the newer worked at the default 1.8 voltage all timing and specs besides voltage were the same). I entered the bios setup and set my Memory voltage to 1.95 (What I had been runnin the older memory in my old system). Inserted all the memory back in and system booted right up to allow me to install my OS (Vista Home Premium 64-bit).
After the OS installed the system started having all kinds of wierd clitches/problems at one point it locked up and neither reset button nor the power button would work. After unplugging the power I noticed that the M connector for the front case switches was a little loose. I decided to just plug wires directly into board instead of using th M connector. Now my buttons worked again. I then proceded back into the bios and checked my voltages in the hardware monitor of the bios. All voltages looked to be fine with only an ocassional voltage fluctuation in the 5V line from 4.97 to 4.92 Volts and the 12V line was a little high 12.4 Volts. However, after booting back into vista and installing Everest Ultimate Edition it detected the that the 5 Volt line was only at 4.67 Volts. But was not fluctuating at all.
After installing the drivers for my system and proceding to install my anti-virus software the system started freaking out the mouse started lagging and sometimes not responding at all and the keyboard worked intermittently. I decided to remove the M connectors from these as well and that solved that problem. Upon rebooting the system and trying to install the Anti-Virus software again the system started telling me that I had just plugged in something to the audio connector. I had not so I just ignored it and continued to install my anti-virus. (the audio connector alert popped up 4X while I was finishing the installation of the software. I decided to test the audo so I but a DVD in and and watched the whole movie sound worked fine and no more pop ups about the audio connector until I started to install more software. During the next install of software the screen went black and the DVD and Hard Drive LED stopped flashing. It stayed this way for about 10 Min. I decided to hit the reset button and the system would not enter post again.
Once again I started to pull the Memeory It finnally worked after removing the new memory that I had just bought but none of my Maxtor hard drives were recognized and I started smelling smoke. ( Strange only the Maxtor drives went out, all had the interface boards and one chip on each drive fried. After disconnecting these drives and replacing the maxtor 120 GB IDE drive that had fried with a Seagate 250 GB IDE drive and reinstalling everyting onto it since the maxtor was my boot drive the system started up and was running fine except for the occasioal audio connector popup I finished Installing the rest of my software and everything was running good. So I assumed the problems were due to faulty ram. I contacted NewEgg and arranges for an RMA on the memory went shipped the memory back to NewEgg came back and started to move file some file to my NAS200 After about 4 hours the system locked up again (It had been almost 36 hours since I had had anyother problems with the system and it had not been turned off the whole time. All temps were good CPU was at 29C and GPU was at 46C system temp was 31C according to my Everest Ultimate so I didn't think it was a heat related issue)
Upon restarting my computer I got a message that a recent overclocking attempt had failed (I did not try to overclock!!) After going back into Bios and resetting all my settings the computer would not post agian. I tried to clear the CMOS with the jumper just to make sure that there wasn't any coruption inthe CMOS. Still no Luck. Pulled out one stick of the older ram and it booted but very slow. I went to a local parts dealer and bought some extremely over prived memory just so I could get my system back to 2 GB because I had video edditing software that didn't work very good on 1 GB. After installing no post again. So I started testing each stick of memory that I had in DIMM 1 they all worked but anytime I insert one into DIMM 2 it would not boot. Finnally I but 2 sticks into DIMM 3&4 and It started up and ran good. I decided to set my bios Unganged option to enabled and put memory back into DIMM 1 No luck would not post. I removed the memory from DIMM 1 and computer has worked ever fine except for an error coming out from sleep mode. (Never had a computer that didn't have a problem with that) I even updated the BIOS to 1.5 which was suppose to fix the wakeup problem.
So here is what I have I can use Dimm 1 by itself or I can use DIMM 3&4 but not both together. I'm about to buy a Power Supply (single 12V rail at 40 Amps and a 5V rail at 50 Amps) because I think that the 12 V reading as 12.4 and the 5 Volts reading as 4.67 in Everest Ultimate and 4.97 volts in Bios might have something to do with some of my problems. I did not check the Memory that I RMA'd by them selves on DIMM 3&4. I think that they may have been good now.
Can the 5V line registering the way it is 4.97 Bios/4.67 in Windows cause DIMM 2 to not function and create the lockups or can the socket or board be bad and that be what is causing this problem? And Should I RMA the motherboard back or just purchase a different motherboard?
System is pretty Stable as it is now with the voltages as they are. I really wantt to be able to put my new memory that I get back from NewEgg in and have my 4 GB of memory.

OK I have removed the mother board and and checked for grounding issue or any damage from the fried hard drives board looks good did not find any grounding issues in the case. One thing I did not check was that I was using a Startech SATA to IDE converter to connect the the IDE drives that I didn't have the connectors on the board or.
I did some research before buying them and made sure to get one with a plastic box around the pcb due to so many people compaining that their's would short to the hard drive case. Since the loss of the HDD I didn't need the adapter so I quit Using it.
when I did my research on the adapter I found that many people had said that their HDD got hoter when using the adapter I guess my HDD just couldn't handle it. The Drive that I had connected with it was about 6 years old and I had been having intermittent problems with the connector not making a good connection when it was in my old system. (Anytime I would shut the power off for a long period of time and the HDD had a chance to cool down I would have to unplug and reconnect the ide cable from that drive.)
I didn't think that the problem would continue as I was moving it to an new case, motherboard, and cable.
And it just so happened that the drives that fried were all connected the the sata controller in the SB600 chip. My two SATA drives that survied the fire were on the Promise T3 controller. So I guess it is possible that the adapter/HDD configuration I had with the SATA to IDE caused some sort of feedback into the Motherboard's SATA controller and back into the oter HDD on that Controller. I have checked all SATA ports since this happened and they all still work so I'm assuming that it did not damage the chip.
As far as the memory situattion I don't see how the HDD frying could have damaged the Memory unless there is some special connectin between DIMM2 and the SATA controller that doesn't exist with the other DIMM slots. and if it had somehow effected the memory controller to cause this problem I would assume it would have done alot more damage to the cpu than just the memory controller part. So I think I'll try to RMA a new motherboard, if ZippZoomFly will let me this long after getting the board I've had it for about 3.5 weeks waiting on the other parts for the new system) and see what happens.
As for the memory, itself they are not mixed brands or models. I bought one set about a year ago when I purchased my X2 6000 processor and they have worked great as long as I kept the voltage above 1.9 V. The new memory has the same model # as the old but the label on them states the same timings and only a different voltage range. So as long as they voltage was set to within the range of both sets they should work exactly the same. I did notice that the board would only detect 3.25 GB instead of 4 GB, and I was prepared for this. Every Motherboard I have ever owned, no matter who the Manufacturer was, has had this problem. However Vista reported the memory correctly.
I guess if the new motherboard exhibits the same memory problem with not letting me use all slots then i'll buy a 2X2GB set

Problems with reading XML files with ISO-8859-1 encoding

Hi!
I try to read a RSS file. The script below works with XML files with UTF-8 encoding but not ISO-8859-1. How to fix so it work with booth?
Here's the code:
import java.io.File;
import javax.xml.parsers.*;
import org.w3c.dom.*;
import java.net.*;
* @author gustav
public class RSSDocument {
    /** Creates a new instance of RSSDocument */
    public RSSDocument(String inurl) {
        String url = new String(inurl);
        try{
            DocumentBuilder builder = DocumentBuilderFactory.newInstance().newDocumentBuilder();
            Document doc = builder.parse(url);
            NodeList nodes = doc.getElementsByTagName("item");
            for (int i = 0; i < nodes.getLength(); i++) {
                Element element = (Element) nodes.item(i);
                NodeList title = element.getElementsByTagName("title");
                Element line = (Element) title.item(0);
                System.out.println("Title: " + getCharacterDataFromElement(line));
                NodeList des = element.getElementsByTagName("description");
                line = (Element) des.item(0);
                System.out.println("Des: " + getCharacterDataFromElement(line));
        } catch (Exception e) {
            e.printStackTrace();
    public String getCharacterDataFromElement(Element e) {
        Node child = e.getFirstChild();
        if (child instanceof CharacterData) {
            CharacterData cd = (CharacterData) child;
            return cd.getData();
        return "?";
}And here's the error message:
org.xml.sax.SAXParseException: Teckenkonverteringsfel: "Malformed UTF-8 char -- is an XML encoding declaration missing?" (radnumret kan vara f�r l�gt).
    at org.apache.crimson.parser.InputEntity.fatal(InputEntity.java:1100)
    at org.apache.crimson.parser.InputEntity.fillbuf(InputEntity.java:1072)
    at org.apache.crimson.parser.InputEntity.isXmlDeclOrTextDeclPrefix(InputEntity.java:914)
    at org.apache.crimson.parser.Parser2.maybeXmlDecl(Parser2.java:1183)
    at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:653)
    at org.apache.crimson.parser.Parser2.parse(Parser2.java:337)
    at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
    at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:185)
    at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
    at getrss.RSSDocument.<init>(RSSDocument.java:25)
    at getrss.Main.main(Main.java:25)

I read files from the web, but there is a XML tag
with the encoding attribute in the RSS file.If you are quite sure that you have an encoding attribute set to ISO-8859-1 then I expect that your RSS file has non-ISO-8859-1 character though I thought all bytes -128 to 127 were valid ISO-8859-1 characters!
Many years ago I had a problem with an XML file with invalid characters. I wrote a simple filter (using FilterInputStream) that made sure that all the byes it processed were ASCII. My problem turned out to be characters with value zero which the Microsoft XML parser failed to process. It put the parser in an infinite loop!
In the filter, as each byte is read you could write out the Hex value. That way you should be able to find the offending character(s).

Etc/system file corrupted how to recover it?

etc/system file corrupted how to recover it?

with boot -a you can only specify new /etc/system during boot , e.g. /dev/null
but if you want to recover it , you can do it from live kernel ( if you didn't reboot after /etc/system was corrupted )
with
echo ::system|mdb -k
or from previous crash dump simmilar way
cd /var/crash/`uname -n`
cho ::system|mdb unix.[x] vmcore.[y]

Problem with finding a File

Hi:
I am having problem with finding a file on the OS
(using Win2000) when given an absolute pathname;
here is the rough code:
//theFile is specified at command line
File f = new File(theFile);
BufferedReader in = new BufferedReader(new FileReader(f));When I run the program, I type
java myProgram C:\aFolder\theFile
But it can't find theFile. I am not sure what's wrong.
Thanx

No that can't be it; he takes the filename from the command line, so escaping isn't an issue (unless he used a shell that unescaped '\\' for him, but I think he's using the win2000 cmd shell).
Dunno, I have no idea of your filesystem or shell. Just do some debugging, around the lines of:
File f = new File(theFile);
if (f.exists()) {
System.err.println(theFile + " exists.");
} else {
System.err.println(theFile + " doesn't exist.");
}

Problem with reading config file

Hello,
I have problem with reading config file from the same dir as class is. Situation is:
I have servlet which working with DB, and in confing file (config.pirms) are all info about connection (drivers, users, passw, etc.). Everything work fine if I hardcoded like:
configFileName = "C:\\config.pirms";I need to avoid such hardcoding, I tryied to use:
configFileName = Pirms.class.getClassLoader().getResourceAsStream ("/prj/config.pirms").toString();but it isn't work.
My config file is in the same directory as Pirms.class (C:\apache-tomcat-5.5.17\webapps\ROOT\WEB-INF\classes\prj)
Also I tryied BundledResources, it isn't work fo me also.
Can anybody help me to solve this problem? with any examples or other stuff?
Thanks in advance.
Andrew

Thanks, but I am getting error that "non-static method getServletConfig() cannot be referenced from a static context"
Maybe is it possibility to use <init-param> into web.xml file like:
<init-param>
<param-name>configFile</param-name>
<param-value>/prj/config.pirms</param-value>
</init-param>If yes can anybody explain how to do that?
I need to have that file for:
FileReader readFile = new FileReader(configFile);Thanks in advance.

Problems with some PDF files

Hi,
I have problems with some PDF files. After clicking on link to the file Safari shows me insted of normal document (which is working on Windows) hashes, numbers etc like it was a problem with coding or something. First I was using Preview, I though that maybe installing Acrobat Reader with plugins will solve the problem, but ofcourse it didn't. Did somebody has this same problem?

Back up all data.
Please triple-click anywhere in the line below on this page to select it:
defaults delete -app Safari WebKitOmitPDFSupport
Copy the selected text to the Clipboard by pressing the key combination command-C.
Quit Safari. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign (“$”) to appear below what you entered. You can then quit Terminal. Test.

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with uploading a file in Clustered Environment

Hi,
I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
Is there any solution to upload the file to all the nodes in the cluster.
Thanks
Kiran

Hi,
This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes. However, there are some ways to get around this
1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
3. Store the files on a shared disk directly from the portal component.
Cheers
Dagfinn

Problem with /etc/system file

Similar Messages

Maybe you are looking for