Problem with ethernet adapter

i bought usb-ethernet adapter to my mac, but it doesnt work with it. I tryed to connect it to windows and it started to work normally. Any ideas?

Hi Everyone,
I have exactly the same problem as SamuelMM mentioned, changing MTU does not work.
Anyone can help?
Thanks and best regards,
Yuxin Liu

Similar Messages

Problem with FTP Adapter in creating a new Folder

Hi all,
I have a requirement in which a BPEL process shud create a folder named as sysdate dynamically and write a
CSV file into that.(ex: PO/2010-03-09/PO_1.csv).I created a header variable for Oubound FTP adapter and
passing the file directory as concat('PO/',xp20:current-date(),'/') to outbound header directory variable.Problem is FTP
adapter is not creating the sysdate folder its says:1.check u have privileges 2.file name is too long....Blah....Blah.
But i have all the privileges for that user.If i manually create the sysdate folder the FTP adapter is placing the CSV
file.The same works fine with file adapter...but i need to use FTP since the FTP server can change in future.Seems to
be a problem with FTP adapter....can some one help.
Iam using SOA 10.1.3.4
Regards,
Edited by: 0racler on Mar 9, 2010 4:46 AM
Edited by: 0racler on Mar 9, 2010 5:49 AM

any thoughts????

Problem with FIle Adapter

Hi
We r facing typical problem with file adapter.
Lets say there are 30 files to be processed by placing an copy in arichive folder by file adapter based on pooling
parameters.
All the 30 files are picked up and we can see the copies in archive folder.
But when we go to RWB and check the audit log,
there we could see only 25 files , the 5 files are missing.
no trace found therre about the 5 files.
This is happening only some times and not to all the files placed in the FTP. Later when the same file is placed back from the Archive folder to the Source folder, the file is being picked and processed succesfully.
unfortunately this is happening on Production server
Any pointers which could trouble shoot this issue.
Regards
shekar chandra

Hi,
Couple of thing which you can try....
1. Use EOIO QoS and check if you still face the issue.
Is some program or application writing files to the directory? If yes I would recommend the use of a temporary name to write the files and then rename them.
Sometimes when an external application connects via FTP and transfers the files...
The file could be picked up by the adapter poll even before the transfer of data is done.
Which is why you will find that the file is archived but there is no xml message created for the same in the Integration engine.
Try increasing the poll interval. This helps sometimes.
Regards,
Sidharth

Problem with Lightning Adapter after update to IOS 8.1

Dear all,
last week I updated the Iphone 5S of my wife with IOS 8.1 since that time we can not connect the B&W Bowl via lighning adapter (Original Apple).
Before never any problem. I have the new Iphone 6 but IOS 8.02 and no any problem with same adapter to connect the B&W Bowl.
I also checked in my car same problem with IOS 8.1 we can not connect but with 8.02 no problem.
I contacted the Apple support and it looks it´s a problem with the new IOS 8.1.
Does anybody have the same problems with the connection to Docking Stations etc ?
best regards
Jens

measure the speed with speedtest http://www.speedtest.net
and maybe contact your carrier

I have Power Mac G5 1.8 single. I have a problem with ethernet port, before it was working with the internet, but now i shows it is connected even the cable is disconnected. I'm running Leopard 10.5. any help

I have Power Mac G5 1.8 single. I have a problem with ethernet port, before it was working with the internet, but now i shows it is connected even the cable is disconnected. I'm running Leopard 10.5. any help

Reset the PRAM.
http://support.apple.com/kb/HT1379
If that fails, reset the PMU.
Scroll down the following page and click the G5 link for instructions:
http://support.apple.com/kb/ht1939

Z77A-GD65 Problems with Ethernet (Intel 82579V) Code 10 and 55 error

it is just a day with disaster. I bought Z77A-GD65 yesterday, and now it almost driver me crazy , i have two most famous problem of the board ,the CODE10 and ERROR 55!!!
after i bought this board to home ,i spend few hour to figure out the reason why the system can not be booted.
the DIMM SLOT 3&4 of my board is malfunction,no matter what combination i use (1&3,2&3, 3&4...etc),but it works for 1 and 2(i have 4 ram sticks,all of them is fine)
i do upgrade to BIOS 10.5(thx god ,i have two computer ,otherwise i cant even do it because of following issue)
after i solve the problem by only plug in 2 ram (DIMM1&2), succeed to boot up, a new problem occurred to me ,the CODE10!
latest driver , clean system install ,cmos cleaned, does not help.
i have read this thread for code10
https://forum-en.msi.com/index.php?topic=158591.msg1167303#msg1167303
and for error55
https://forum-en.msi.com/index.php?topic=158224.0
it seems the best way to solve it is RMA.
I notice that there is an Authorized Motherboard Repair Center (East Coast):
361 Alden Road
Markham, Ontario, L3R 3L
i live in Toronto, can i just go there and give the board to them to fix it or i can only mail it?
If i need to mail it ,what should i do?

Code 10 means the device cannot start. You have the right driver for the Intel 82579V is shorted by either a motherboard screw or a raiser under it. The ethernet adapter has lights which light up id driver is installed (even though code 10 is in effect).
Solution: Remove 1 or 2 motherboard screws and turn the pc on. Repeat until you find out which screw caused the issue. For me it was the screw closest to the ethernet controller.
The wa i fixed it was I was used a plastic washer and I was still able to have the motherboard screw in and at the same time not get code 10 anymore and my Intel 82579V worked fine since.

Windows 8.1 Upgrade problem with Ethernet on a Flex 15

Windows 8 was upgraded to Windows 8.1 Upgrade on a Flex 15.
The first time I tried to do the upgrade, I had enough problems that I re-installed from a Windows 8.1 image. All went well and all the drivers work except the Ethernet. The upgrade was relatively painless if you ignore the necessary reboots.
The latest Ethernet driver was downloaded from Lenovo and it was upgraded through Device Manager to version 8.26.218.201
In spite of Device Manager saying the Realtek ethernet adapter is working, no network is recognized by Networks and Sharing Centrewith when an ethernent cable is plugged into the Flex 15 i. The cable is good and has been checked by way of another computer.
I have previously used the hard-wired ethernet once and it worked but I do not remember where the laptop stood during the pgrade path.
This may be a hardware problem which will require mailing the laptop for the repair, or it may be a software / dirver issue.
If anyone has a suggestion, please let me know. The only other thing I can do is reistall from scratch to confirm it is a hardware problem.
With thanks in advance.
Solved!
Go to Solution.

OK So I'm not the smartest cookie in the cookie jar.
The Ethernet worked all along, but I inserted the ethernet cable UP-SIDE-DOWN. The Flex 15 has a 1/2 size ethernet female plug and it has a small cover which flips down. This is to allow the adapter in a thin shell
The male end can be plugged in upsidedown unlike a normal-sized ethernet female. It goes in, but does not click. So a word to the wise ... the plastic prong of the male end is on the bottom.

Problem with ethernet

I had a connect with 2 computers - pc and macbook. I often switched cable between them and one day connect on macbook disappeared and it still disappears. But connect on pc is ok and I don't know what is a problem - or it's a bad cable, or it's a bad ethernet-adapter. Does anybody know what I must doing?
p.s. sorry with english, I don't know it very good

But I haven't a modem - just a cable, which plugs into ethernet port. And macbook says that cable isn't plugged in, but it can't be true!! Later all was ok and I had a good connect!

Problems with Ethernet controller and PCI device driver on Satellite L30-10X

Hellow!
Sorry for my bad English, I'm from Russia.
Just few days ago I bought Satellite L30-10X with W Vista on board. My opinion, that this OS does't very good on this computer, so I install W XP.
I have some problems with drivers. At first, I dont know what model I have:PSL30 or PSL33? I download all drivers for both models. But, after installation, computer doen't find drivers for Ethernet controller and PCI device...

Hi
Satellite L30-10X belongs to the PSL33E series. This number can be found on the label placed on the bottom of the unit!
You have to choose this number from the driver download form to get the compatible XP drivers.
I dont know why you are not able to install the LAN driver. Ive got the same notebook with Vista and Ive installed the XP and all drivers run fine.
I assume you have installed the drivers in wrong order. Please take the look in the Toshiba installation instruction txt file. In this order you have to install the driver! Its important.
I think you should install the XP again to ensure the clean registry and then download and install the compatible XP drivers like mentioned in the installation instruction file.
Good luck

Problem with ethernet port

So I have a wierd problem.
Sometimes the ethernet port is working, sometimes not.
I've tested the ethernet cable and it works perfect with other computerS.
I've tested my macbook pro with other ethernet cables and the problem still occurs.
I've tested the ethernet plug (in the wall) and it works pefect with other computerS.
So only last potential problem : the ethernet plug / card IN my macbook pro.
It is a 2.8 Ghz Intel Core i7 with 8 Gb of 1067 Mhz DDR3 RAM, and OS X 10.7.4.
The problem is just random... sometime it works, sometime it doesn't... sometimes it works, and stop working... sometimes it works for days without problems... sometimes it doesn't work for days, with nothing to do.
Can anyone help? I don't think I'm on the warranty anymore... so before I go drop my MBP at an Apple Store, I want to make sure I've tryed everything.
Especially for the price I paid for this MBP, can't believe I'm hustling with such a basic feature......
THANKS FOR THE HELP!!!

I've used the reset chache solution with mixed success. I finally tripped over something that actually works every time. The "secret" seems to be getting the apply button active when you are on the "location" where the ethernet connection is configured. Here is what I did.
move the ethernet connection configuration to another "location" within network preferences. I called mine Home Wired.
When the cable disconnected situation occurs, switch to the location that has wireless and enable wireless. Now turn it back off.
Switch to the wired location and highlight the wired configuration and click apply. It goes through the steps of acquiring an IP and then you are connected.
Easy peezy

Problems with File adapter

Hi All
I am facing some problems with XI system. XI production server was restarted couple of days back. From that time, 1 file is not reaching its destination. When i go to communication channel monitoring, i see this message for all the communication channels with file adapter "No adapter registered for this channel".
But, communication channels with SOAP adapter are working fine, and the corresponding files are reaching its destinations. So, what should i do to rectify this probelm? Do we have to restart XI server onceagain? Is there anything pirticular, to be careful about, while restarting XI system?
Many Thanks in Advance
Chandra Sekhar

Hi Chandra shekar,
Plz try to do the following steps:
1)Try after restarting the Java Stack.
2)Try after SLD cache.
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
This will help you to find SP Level
http://help.sap.com/saphelp_nw2004s/helpdata/en/1f/c45b4211aac353e10000000a1550b0/frameset.htm
http://hostname:5/CPACache/refresh?mode=full
Regards,
Vinod.

Encoding problem with Application adapter for OEBS

Hello All!
We going to pass value via app adapter from EBS Forms to Content Server page. Link to documentation Configuring the Managed Attachments Solution - 11g Release 1 (11.1.1)
We have done all setting, and this function is working now .
It is good working with English letters and numbers, but when we try to use Cyrillic we have a problem with Encoding in Content server page.
Data on Oebs table use ''CL8ISO8859P5'', but service xml for adapter has allays a title with charset=utf-8
System are:
OEBS 12.1.3
Webcenter Content 11.1.1.6
Adapter 11.1.1.6 + patch 16463891
Could you help us?

Hi Denis ,
Try this solution :
1) Log on to the APPS EBS schema and re-create the AXF_SOAPCall function using the following SQL:
create or replace
function AXF_SOAPCall (url varchar2, soapmsg varchar2, secure varchar2, walletid varchar2, walletpass varchar2) return varchar2 as
http_req utl_http.req;
http_resp utl_http.resp;
response_env varchar2(32767);
v_newcharset VARCHAR2(40 BYTE) :='UTF8';
v_Dbcharset VARCHAR2(40 BYTE);
v_Raw1 RAW(32767);
v_Stmt1 VARCHAR2(6000 BYTE);
begin
v_newcharset := 'AMERICAN_AMERICA.'|| v_newcharset ;
v_Dbcharset := 'AMERICAN_AMERICA.'||utl_i18n.map_charset(fnd_profile.value('ICX_CLIENT_IANA_ENCODING'),0,1);
v_Raw1 := UTL_RAW.CAST_TO_RAW (soapmsg);
v_Raw1 := UTL_RAW.CONVERT (v_Raw1,v_newcharset,v_Dbcharset);
if ( secure = 'true' or secure = 'TRUE' ) then
utl_http.set_wallet (walletid, walletpass);
end if;
http_req := utl_http.begin_request(url , 'POST', utl_http.HTTP_VERSION_1_1);
utl_http.set_header(http_req, 'Content-Type', 'text/xml; charset=utf-8');
utl_http.set_header(http_req, 'Content-Length', utl_raw.length(v_Raw1));
utl_http.write_raw(http_req, v_Raw1);
http_resp := utl_http.get_response(http_req);
utl_http.read_text(http_resp, response_env);
dbms_output.put_line('Response: ');
dbms_output.put_line(response_env);
utl_http.end_response(http_resp);
return response_env;
end;
2) Log on to the EBS and confirm that you can now open the Managed Attachments window for all records & forms, regardless of the use (& length) of multibyte string values.
This was caused by multibyte characters used with non UTF-8 language strings .
I presumed that you are seeing that when "Managed Attachments" option through the ZOOM button from an E-Business Suite (EBS) forms, nothing happens.If you have a support id then check the following note : 1409703.1 from MyOracleSupport portal.
Hope this helps.
Thanks,
Srinath

Pismo: problem with Ethernet access

Hello. I have a new (used) Pismo with OS 10.3 installed. I operate a LAN via a DSL connection. I cannot get the Pismo on to the network. I use a cable that works fine with my G4 iBook, but when moved over to the Pismo; the Pismo cannot be made to access the LAN. I have looked over all the settings and cannot figure it out. This is also happening with a similarly configured G3 iBook SE (clam shell). Any ideas or suggestions. Thanks.

Peter,
OK, that is similar to my own setup (substituting a cable modem for the DSL, but I used to have a DSL). Wondering why you are using the LinkSys Router instead of the Airport Base station, since the ABS will do everything as well as pass Appletalk packets (between computers, wired and wireless) while the Linksys will only work with TCP/IP.
Anyway, I assume you Linksys is set up to hand out DHCP addresses and also do the NAT from the single DSL IP address. Your computers are all set up to receive a TCP/IP address via DHCP, right? Finally, I would create a location in 10.3.9 Network system preference that has ONLY the Ethernet network port configuration defined. Do not leave it set to "automatic" since it may try to connect using some other means (such as the modem). If you have upgraded to Airport 4.2, that may also be causing some problems, although it is the Ethernet connection we are talking about.
Note that I have had some problems with DHCP in the past so I use hard-defined Ethernet addresses for all my machines and not DHCP. Mine are all in the 10.0.1.x range (using the Airport Base station), but I think Linksys uses the 192.168.1.x range. You might try that, too.
How are you using your Airport Base Station? And what model is it? Do you have wireless clients? Did any of the above resolve the issue?
Steve

Satellite A200 - Problems with AC adapter

Hi,
The problem concerns an Satellite A200 (PSAF6A-02H01N).
Recently there has been problems with the Laptop taking several attempts to start up Vista, it would lock up while loading or just crash and freeze just after loading Vista.
But Once it was up and running the laptop would happily work for hours with the AC adapter plugged in.
The problem has now got worse and the laptop will not finish loading Vista without crashing.
We have now narrowed the it down to only having a problem when the AC power adapter is plugged in.
The Laptop battery will charge normally with the AC adapter plugged in and the Laptop in standby or switched off.
The problem still exists with the AC adapter plugged in and the battery removed.
The notebook will start up and run perfectly with the battery in and no AC adapter connected. Once the AC adapter is plugged in the Laptop will show that the battery is charging then after a few seconds it will crash or freeze and the only escape is a complete shutdown.
The laptop will only run under battery power for about 30mins max.
I have checked the Voltage output of the AC adapter and this appears to be a consistant 19.4 Volts.
Is it just an AC adapter problem or does the problem lie with the laptop?
Thanks in advance..
Gaz.

Crashing/BSOD's can be caused by many things. The first thing to do is check the RAM and HDD for problems.
Test the RAM for errors. You can use the free Memtest utility:
1) Go to http://www.memtest.org/#downiso and download the "Pre-Compiled Bootable ISO (.zip)"
2) Open the ZIP file and extract the ISO file to a temporary folder.
3) Burn the ISO to a blank CD using an "Image-to-Disc" or "Bootable CD" project in your CD/DVD burning software (dont use a normal Data Project).
4) Insert the Memtest CD into your laptop and turn it on, press F12 to launch the boot menu, and select "CD".
Test the Hard Disk for errors by using DFT.
DFT Download: http://www.hitachigst.com/hdd/support/download.htm#DFT
Download the ISO File and burn it to a CD-R Disc (There is also a Floppy Disk version if that's easier).
If you dont know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
Restart your laptop and boot from the DFT Disc.
Choose the "Advanced" Test and let it run (it may take an hour or so).
If you see a red message box, the HDD is faulty.
An error code 0x70 means there are bad sectors and the HDD needs replacing.

Problems with MagSafe Adapter including sparks

When I plug my adapter into the plug socket I always see white sparks when plugging it into an extension lead. Is that normal or safe?
Also I have been having problems with the magsafe as when plugging it into my Mac Book Pro it doesn't always charge and you have to fiddle around with the wire to get it to start charging or unplug it a few times. I am also finding the magsafe bit is getting extremely hot as is the Mac Book Pro itself. Even when using it for simple web browsing. The CPU sometimes reaches 90° as well.
I have also been experiencing quite a lot of freezing / crashing / lagging on my mac book recently as well. Could this be related?
Should I take this to an apple store?

I have had a similar problem. There are a few questions you might want to answer:
1. Does your MBP have any fraying cables or wires? If so, you should replace the Magsafe power adapter as quickly as possible. This can damage your laptop, eventually.
2. Is your "Magsafe" an original unit? If it's a knock-off, this could account for electrical instability.
3. Does your Magsafe power adapter take power directly from the wall socket, or do you have multiple plugs? Sparks or heat indicate that the adapter is taking in a large amount of energy - that may not be fully grounded.
I mention these questions because I hope to spur more questions, which might eventually solve your problem. I have no idea whether the freezing and crashing is related to your problem, but it's certainly possible. I would strongly suggest writing detailed notes of the problem, and then proceed to the Apple Store.

Problem with ethernet adapter

Similar Messages

Maybe you are looking for