Problem with Euro sign when converting it into PDF Format

Hi all,
i am facing problem with Euro (u20AC) sign,
it is displayina s #
when converting one smartform into PDF format.
Can any body sugest me in doing this??
it is appriciable if any body can help m??
thanks in advance
Regards,
Srikanth.

Hi Srikanth,
I think I'm facing the same issue as you. I looked at the note 323736 but my system seems to be up to date (at least for this issue). I have SAP_BASIS release 700.
Did you upgrade your system ? Did you do something else ?
Thanks for your help.
Best regards,
Pierre

Similar Messages

  • Problem with page size when converting spool to PDF

    I have a SmartForm invoice which is formatted perfectly when I print it using the printer options specified when I open the form. However, when I send the output to spool, convert it to PDF using FM CONVERT_OTFSPOOLJOB_2_PDF, then print to the same printer, the format is not correct.
    The PDF generation feature treats the page (standard letter size, portrait) as too large and shrinks the output to fit the page. It scales the entire invoice down by about 1/4 inch, which throws off our mailing envelope.  If I change the page scaling option of Adobe Reader to 'None', my invoice is scrunched up into the top left corner of the page.
    My page format is LETTER Portrait.
    Any help or suggestions will be appreciated. Thanks.

    hello see the sap note 843480

  • Problems with Capture Date when converting from PSE9

    I'm trying to troubleshoot a problem I'm having when converting my PSE9 catalog to LR3.4. Specifically, about 20% of my images (abouit 2,500 out of 12,000) didn't import with capture dates. I can clearly see the correct capture dates in PSE9 Organizer, but when I view the same imported images in LR3.4, there is no date. This occurs with dates that I've modified in PSE9 as well as dates straight out of the camera.
    This is a major problem for me because I'm used to organizing my photos in PSE9 using capture dates. On a related note, PSE9 allows you to set the capture date to a known year and unknown month, day, and time, but when imported into LR3, these dates are converted to Jan 01 of the known year. Sorry, but Jan 01 is not the same as unknown. Is there a way to correctly display unknown portions of a capture date in LR3 similar to the way it's displayed in PSE9?
    Sorry if this has been discussed before.

    How did you convert your catalog?  Did you use File > Upgrade Photoshop Elements Catalog, or did you use File > Import Photos?  You should use the former; the latter has many problems, among which PSE doesn't always correctly write medata (e.g. capture dates) into files. If you used File > Upgrade Photoshop Elements Catalog, post an image here and we can take a look at its metadata to troubleshoot.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    On a related note, PSE9 allows you to set the capture date to a known year and unknown month, day, and time, but when imported into LR3, these dates are converted to Jan 01 of the known year.
    Even though Adobe's XMP metadata standard allows for unknown month, day, or time, most programs including LR don't support it -- PSE is the only program I know of that does (and it has problems).  I use the conveniton of 1/1 12:00:00 to represent unknown values.
    See this FAQ for other issues with converting PSE catalogs to LR:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Converting_to_Lightroom

  • Convert PO into PDF format and send by an email to vendor

    We are using SAP version ECC 5.0. We want to convert SAP PO into PDF format and attached it in an email and send it to vendor. Please give me some tips to achieve this?
    Thanks in advance!
    Mrudula

    Hi!
    The way to achieve your goal depends on how you get PO printed - by sapscript, smartform or abap list.
    As have been mentioned you can create spool request and process it. But for sapscript and smartform you can proceed without spool request - just get back OTF data from corresponding FM and convert it to PDF.
    In case of smartform:
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
    formname = 'ZFORMNAME'
    IMPORTING
    fm_name = v_form_name
    EXCEPTIONS
    no_form = 1
    no_function_module = 2
    OTHERS = 3.
    w_ctrlop-getotf = 'X'.
    w_ctrlop-no_dialog = 'X'.
    w_compop-tdnoprev = 'X'.
    CALL FUNCTION v_form_name
    EXPORTING
    control_parameters = w_ctrlop
    output_options = w_compop
    user_settings = 'X'
    IMPORTING
    job_output_info = w_return
    EXCEPTIONS
    formatting_error = 1
    internal_error = 2
    send_error = 3
    user_canceled = 4
    OTHERS = 5.
    i_otf[] = w_return-otfdata[].
    In case of sapscript:
    options-tdgetotf = 'X'.
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
    options = options
    CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
    RESULT =
    RDI_RESULT =
    TABLES
    otfdata = i_otf
    EXCEPTIONS
    unopened = 1
    bad_pageformat_for_print = 2
    send_error = 3
    spool_error = 4
    OTHERS = 5.
    Then convert to PDF
    DATA:
    pdf LIKE tline OCCURS 100 WITH HEADER LINE,
    v_len_in LIKE sood-objlen.
    CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
       format                      = 'PDF'
       max_linewidth               = 132
      ARCHIVE_INDEX               = ' '
    IMPORTING
       bin_filesize                =  v_len_in
        TABLES
          otf                         = i_otf
          lines                       = pdf
       EXCEPTIONS
         err_max_linewidth           = 1
         err_format                  = 2
         err_conv_not_possible       = 3
         OTHERS                      = 4
    Then send as attachment as Max proposed.
    Regards,
    Maxim.

  • Converting files into pdf format in java

    Hi all,
    How can we convert a file into PDF format in java?My application does the
    file upload, and I need the files to be converted into PDF format.
    The uploaded file can be of any type. How can I do this?
    Please give me some help.
    Thanks and regards,
    Sandeep.

    >
    How can we convert a file into PDF format in java?My application does the
    file upload, and I need the files to be converted into PDF format.
    The uploaded file can be of any type. ...>1) Write a class that will intelligently render a file of any type..
    2) ... (well, do '1' first, then after getting your Nobel prize for AI, come back and we'll talk)
    >
    Please give me some help.>Please review your requirement.
    BTW
    - PDF sucks. It is designed for printing, and I (for one) don't want to kill more trees, and have no printer.
    - This subject (convert file to PDF) has been discussed on the forums a bazillion times. Did you search the forums before asking your two (very closely related) questions?

  • Problem with spot channels when importing PSD into AI CS3

    tried the Windows forum, and adobe tech support in The Netherlands. Hopefully someone here can help.
    b Problem description:
    I make spot colour separations of full colour artwork by using the index separation method in Photoshop. This creates several spot color channels in my PSD file.
    Normally I just place this PSD file in Illustrator CS2, and when I embed the file Illustrator makes objects of the spot channels. I can change the colors of these objects and delete them etc.
    Now with Illustrator CS3 when I import and embed a PSD file it just creates one object called "Spot Color Image". I can no longer adjust or delete separate spot channels.
    Maybe there is another way to achieving this but I cannot find it myself. Without this method Illustrator CS3 has become useless for me.

    Hi again, I did the same, and I see what you mean. The original image is an image, the channels are separate objects for me, but the original image isn't different channels.
    I found this in the Help file:
    Spot colors (up to 31 spot channels per file) import as a single N‑Channel raster image, which is placed over the process color image. The spot colors are added to the swatches panel as custom colors with the same name as in Photoshop. Imported spot colors separate correctly.
    Will think some more. Not sure what to suggest. Someone must have an answer to help you.

  • Problem with ChemDraw structures when converting word doc to pdf

    I am trying to convert a word document with ChemDraw structures in it to a pdf.  When it converts, I doesn't hold the chemical structures together.  Is there a quick solution?

    Bill@VT wrote:
    I realize that many word processors have an option to turn off the printer metric use. I finally found it in OFFICE 2007 and it is indeed off. It is not off in OFFICE 2003. Though it is available to folks, it is far from an obvious option in WORD. In the word processor I use it is NOT an option and there is actually a warning in the help about the printer metrics. The fact that there may be a switch in a package is not a given and the information I provide is not incorrect, though adding a comment about a switch option is reasonable.
    Yes it's on in prior versions that wasn't ny uncertainity. I wasn't positive it was off in Office 2007. Why do you make a strawman argument over something that isn't the point of contention ? <sigh>
    You were incorrect. Printer Metrics is the only answer because it's a global switch. You're not helping by telling people to use a solution that's not permanent. It's a clumsy hack.

  • How to stop Preview from changing resolution when converting JPEGs into PDF

    I am combining several JPEGs of identical resolution into a PDF using Preview, using either the sidebar or Automator action (http://discussions.apple.com/thread.jspa?messageID=11893607). For some reason, Preview changes the resolution of the PDF so viewing it at actual size (100% zoom) is bigger and pixellated. Example: a 960x600 JPEG becomes approx 1355x845. I figured it had something to do with dpi and indeed if I do the calculation and open up each JPEG in Photoshop and resize (without resampling, i.e. without changing pixels) to 101.5, the resulting PDF is pretty close to what it should be. (Calculation = 1355/960 * 72dpi.) But the slight resize and recompression lowers quality, plus it's a huge pain to go through all of that for every image.
    This issue is the same for simple saving a single image, the combining and use of Automator script has no impact.
    My question, in summary: how do I get Preview to save a JPEG as a PDF without changing its resolution?

    I have the same problem. I have a bunch of scanned documents (jpeg), and have been trying to make them a multi page document, instead of 20+ images.
    Using the Automator "New PDF from Images" preview action v1.0, supplied by Apple with Snow Leopard, and I am able to convert the images to a PDF.
    Using these images, the first page being 1032 x 1600 pixels, and telling the automator action to +size each page to fit image+, I convert them into a PDF.
    Converted PDF is viewable here.
    The original JPG is clearly higher resolution than the PDF, and the PDF loses the crispness of the original scan. Even using "+size each page to fit image+" does not make the page the original image size.
    What's happening here, and does anyone know a better way to convert Jpegs to PDF on the Mac - and keep the image resolution? I don't care about files sizes here, but keeping resolution and maintaining quality.

  • Problem with image location when converting word document to pdf

    Hello all,
    I am new to all this and this question may be already answered, but when I try to convert a word (2003-2007) document containing images (inserted photos) into a pdf document using Adober Reader 8, the images are moved from their original location and the size and ratio are changed.  Is there either a process for preserving the images as they are in the word doucment or a way to fix the problem?  Thanks for any help you can give.
    Regards,
    Rose

    Really not sure what you are trying to do since you can not import images into Reader. Since Reader can not create PDFs, we are at a loss of your problem. If you mean Acrobat, then tell us exactly the steps you are using to create the and what versions of both programs Like AA8.1., WORD 2003 (possibly release also) or WORD 2007. The different versions of WORD also also interact with Acrobat differently.

  • Problem with logo size when converted to eps

    I am brand new to Illustrator. I have created a logo and converted it to an eps file. My problem is that when I use the logo, it is a big square with a lot of empty space on the bottom. I sized the art board to the area around the logo but when I convert it I still get this big square with the logo on the top part when I paste it into my word document. How do I get it cropped down to the correct size. I have someone waiting for this and I can't even get it in a format they can use.

    Sounds like there is a hidden element somewhere forcing the entire document to wherever that element is, even outside the artboard.  Just a hunch.  Do a Command Y ( Mac ) or Control Y ( PC ) to see outlines.  Then, do a "Select All" and see if the element shows up anywhere.  Find it and delete it.  Now, maybe there is no hidden element.  This is what I do for every logo I've prep'd:  A.) if the artwork is 2" h x 3" w ( hypothetically speaking ), set your artboard size to 3 x 5.  Set an imaginary holding line to the 3x5 size by applying a rectangle 3x5 with no stroke and no fill > then Lock it ( Object > Lock selection ).  You may benefit by Exporting the artwork as an RGB .tiff and using that in Word.  However, you can import or insert an .eps in Word, but whatever works better.  Hope this helps.

  • Problems with some photos when converting Publisher files to PDF using Acrobat 9

    I tried to make a pdf of a publisher document that has a number of photographs. Two of the photographs appear grey with streaks -looks like some of the colours are not converting properly. The same document works fine with Acrobat 8 but not with version 9. Anybody have this experience?

    Graffit's suggestion did not work for me.
    I work for the Ontario government, and we are still using Office 2003. I am not sure what version of 9 we are using as we get bulk licences to use the program. I only got the program in August 2010. I used the default settings in the program.
    I try to open the publisher document in Adobe. I have also tried opening the publisher document, then converting it to the PDF. Both have two of the photos that don't convert properly. The other photos are fine.
    The two photos in question were given to us by the Communications department. I don't have the originals. The photos were copied from other document. I don't know what the format of the orginal photos were. The person in Communications has not responded to my request yet.

  • Problem with Euro Symbol when import a PDF in SAP

    Hi all,
    I developed a sap interactive forms based on two custom tables.
    It works fine, i can download from sap and upload in sap the data.
    I have a preblem if, in a text field, in the pdf file I put the u20AC symbol. with this symbol the system can't convert the pdf and so It isn't able to create the xml structure from the pdf file.
    Any suggestion?
    thanks
    enzo

    Very odd.
    But if you want help you will need to provide more details: OS, version of Acrobat, how the file were created, etc.

  • Converting JTable into pdf format

    Hi All,
    I have a fairly big Jtable with more than 100 columns in it. How can create a printable PDF version from it. THe current version of iText doesn't generate it right. It trims after 4 or 5th column.
    I am afraid that I can create a PdfTable from this big Jtable.
    Thanks

    Hi,
    I'm actually using iText and I think you have better to create your table as a PdfPTable. Doing this, you can display all the table : header + rows.
    look at the iText documentation, there are plenty of PdfPTable examples.
    hth

  • How to convert report to PDF format

    Hi,
    Please let me know the procedure to convert reports into PDF format.
    Thanks in Advance
    Irfan Hussain

    Refer these links
    http://www.sap-img.com/bc037.htm
    http://www.members.tripod.com/abap4/Save_Report_Output_to_a_PDF_File.html
    <b>CONVERT_ABAPSPOOLJOB_2_PDF</b> FM convert abap spool output to PDF

  • HT1567 GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE PO

    GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE POWER

    Please don't shout.
    Has the unit EVER been jailbroke?  Has it EVER been dropped?  Did it EVER get excessively wet?  Did you EVER load a pirated developer's version of the IOS?
    If "No" to all the above, first try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

Maybe you are looking for