Problem with"Evaluate User Policies"sch task after the upgrade OIM R1 to R2

Problem with "Evaluate User Policies" scheduled task after the upgrade from OIMg R1 to OIM 11g R2
After the upgrade process is completed we are having issue with Access policy not triggering if rule is set to custom attribute
- We had a Rule with custom attribute (Policy='Full-Time') the value gets populated by event handler which triggers the access policy in OIM 11g R1.. which worked fine in OIM R1
After the upgrade the value is getting populated but even after running "Evaluate User Policy" the Access Policy is not getting triggered.
We tested creating a rule with other custom attribute,policy does not trigger even after running Evaluate User Policy schedule Task in this case too
but if we try creating rule with OOTB attributes(Country='US') it works fine the access policy got triggered after running Evalute User Policy
One more issue we observed is
- Evaluate User Policy value usr_policy_update is not updated still set to '1' even after the Access policy got triggered (as it worked when rule is set to OOTB attribute)
I believe after the evaluate user policy gets triggered for a user it should update the value from '1' to '0')
Please let me know if you have any idea..Thanks!

well, I overcame the issue by 'fooling' the installer: on second node, change the scan ip address to point to something else (ie, different ip address to the scan in the first node, cleanup then rerun root.sh, it went past the trouble stage, then I still have problem later at the time database creation. I think scan ip address has to be setup correctly (round robin thingy)
This is how i did the cleanup before rerun root.sh
/u01/app/11.2.0/grid/crs/install/rootcrs.pl -verbose -deconfig -force

Similar Messages

I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade

I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade . I have tried & tried to pair again & that wont work either , suggesting it is the phones software . Can anyone help please

Hi there soulboycraney,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
-Griff W.

We have 3 iphones in my family. With the new upgrade 5.1 all the batteries last for just half day in normal use. The same problems happens to a lot fo friends after the upgrade! Is it possible to remove the problem?? Thanks. Mauro, Italy.

We have 3 iphones in my family. With the new upgrade 5.1 all the batteries last for just half day in normal use. The same problem happens t a lot of friends of mine after the upgrade. Is it possible to remove the problem??? Thanx!

We have 3 iphones in my family. With the new upgrade 5.1 all the batteries last for just half day in normal use. The same problem happens t a lot of friends of mine after the upgrade. Is it possible to remove the problem??? Thanx!

Why does my iphone5 have problems with internet based apps and browsing after the 6.1.2 update?

Hi,
I am having major issues accessing the internet and loading web apps after the 6.1.2 update on my iphone 5.
Anyone else having the same...have tried all th usual resets etc.
So frustrating - why can't Apple test software releases properly!
Vivek

hi
The problem is specifically on Wi-Fi, the apps that are persistently causing issues are:
Safari
Email
Facebook
Twitter
You Tube
The App store
BBC Iplayer
I keep restarting the phone which helps temporarily but then the Apps get timed out again. Looks like it cannot retrieve data over Wi-Fi.
Thanks for your help so far.
Vivek

Linksys M10 and Mountain Lion OS problems with Guest User - which router is best to upgrade to for Maverick and higher OS coming in fall?

Since we upgraded our OS to Mountain Lion the Guest User on the Linksys M10 router isn't working. Not compatible. Which Linksys should one upgrade to for use with Maverick OS and the newer releases coming this fall and onward?

Sorry - I have Maverick 10.9.4 and the guest user on the link sys M10 isn't compatible. Any suggestions on which wifi router to upgrade to for newer releases of OS coming?

Fascinate problem with app sharing links via email after Froyo upgrade

Since the Froyo 2.2 upgrade, I've noticed that anytime I select "Share" via email from an app - the Title is included in the email message, BUT NOT the the actual link. This happens with all news apps and other apps. Good grief. I'm 7 months into a 2-year contract and sooooo tired of bugs with this phone (Samsung Fascinate). Wish I'd waited for the iPhone. I know iPhones are buggy too, but this droid situation is like a friggin free-for-all sometimes.

Hi cygnetswan,
I apologize for the delayed reply and understand your concern regarding the Froyo update. I would suggest deleting then re-adding your email account and clearing the cache for the specific app you are trying use.
To clear the cache go to: Menu>Settings>Manage Applications>All>Select the app you are using>Clear Cache. To delete your email account: Menu>Accounts & Sync>Select your email account>Remove Account. Please follow the previous steps to re-add your email account.
Additionally there was a software update released on June 08, 2011. If you have not already complete the updated, I have attached the link: Software Update. I hope these steps resolve your issue, if not please let me know.
Thank you for your patience,

Users added to a Task AFTER the BPM process has started

Does anyone know of a way to assign users to a task AFTER the BPM process has started?

Hi Craig,
whenever a Task Instance gets created, the assigned roles and groups are resolved into individual users. This means that changes to the roles and groups do not affect existing Task Instances.Then the only way to assign additional users is via "nominate" operation from the NWA or "delegate" from the Task UI. Such changes in the roles and groups will only take affect for newly created Task Instances.
Hope this helps.
Stefan

OIM 11 - Error while running scheduled job "Evaluate User Policies"

Hello,
We are trying to run the OOTB scheduled job " EValuate User Policies" with the default parameters. Job history shows the execution status success but diagnostic logs throw the following error. And the users donot get provisioned to their resources based on the access policies.
We are on OIM 11 BP05.
[2013-01-30T10:11:47.072-05:00] [oim_server1] [NOTIFICATION] [IAM-0080006] [oracle.iam.platform.kernel.impl] [tid: Thread-1033] [userId: oiminternal] [ecid: 3f3dc64898fb7625:-13c8cd5d:13c88a6943c:-8000-0000000000000002,1:26684] [APP: oim#11.1.1.3.0] Orchestration process moved to failed stage, and the corresponding error is - {0}[[
oracle.iam.platform.kernel.EventFailedException: Operation - EVALUATE_POLICIES that is submitted as part of the orchestration is not supported.
at oracle.iam.platform.kernel.impl.EntityDefaultActionHandler.execute(EntityDefaultActionHandler.java:53)
at oracle.iam.platform.kernel.impl.DefaultActionHandler.execute(DefaultActionHandler.java:41)
at sun.reflect.GeneratedMethodAccessor5717.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
at $Proxy254.execute(Unknown Source)
at oracle.iam.platform.kernel.impl.OrchProcessData.runActionEvents(OrchProcessData.java:1036)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:644)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:764)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.process(OrchestrationEngineImpl.java:519)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:459)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:378)
at oracle.iam.accesspolicy.impl.AccessPolicyServiceInternalImpl.evaluatePoliciesForUser(AccessPolicyServiceInternalImpl.java:78)
at oracle.iam.accesspolicy.api.AccessPolicyServiceInternalEJB.evaluatePoliciesForUserx(Unknown Source)
at sun.reflect.GeneratedMethodAccessor5730.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy574.evaluatePoliciesForUserx(Unknown Source)
at oracle.iam.accesspolicy.api.AccessPolicyServiceInternalEJB_bgsblp_AccessPolicyServiceInternalRemoteImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at oracle.iam.accesspolicy.api.AccessPolicyServiceInternalEJB_bgsblp_AccessPolicyServiceInternalRemoteImpl.evaluatePoliciesForUserx(Unknown Source)
at sun.reflect.GeneratedMethodAccessor5727.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy164.evaluatePoliciesForUserx(Unknown Source)
at sun.reflect.GeneratedMethodAccessor5726.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
at $Proxy421.evaluatePoliciesForUserx(Unknown Source)
at oracle.iam.accesspolicy.api.AccessPolicyServiceInternalDelegate.evaluatePoliciesForUser(Unknown Source)
at com.thortech.xl.schedule.tasks.tcTskUsrEvaluatePolicies$PolicyEvalWorker.run(tcTskUsrEvaluatePolicies.java:319)
at java.lang.Thread.run(Thread.java:662)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask$XLSchedulerThread.run(SchedulerBaseTask.java:157)
[2013-01-30T10:11:47.081-05:00] [oim_server1] [NOTIFICATION] [IAM-0080046] [oracle.iam.platform.kernel.impl] [tid: Thread-1030] [userId: oiminternal] [ecid: 3f3dc64898fb7625:-13c8cd5d:13c88a6943c:-8al.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
        at oracle.iam.accesspolicy.api.AccessPolicyServiceInternalEJB_bgsblp_AccessPolicyServiceInternalRemoteImpl.evaluatePoliciesForUserx(Unknown Source)
        at sun.reflect.GeneratedMethodAccessor5727.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
        at $Proxy164.evaluatePoliciesForUserx(Unknown Source)
        at sun.reflect.GeneratedMethodAccessor5726.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
        at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
        at $Proxy421.evaluatePoliciesForUserx(Unknown Source)
        at oracle.iam.accesspolicy.api.AccessPolicyServiceInternalDelegate.evaluatePoliciesForUser(Unknown Source)
        at com.thortech.xl.schedule.tasks.tcTskUsrEvaluatePolicies$PolicyEvalWorker.run(tcTskUsrEvaluatePolicies.java:319)
        at java.lang.Thread.run(Thread.java:662)
        at com.thortech.xl.scheduler.tasks.SchedulerBaseTask$XLSchedulerThread.run(SchedulerBaseTask.java:157)
Any answer is highly appreciated.
Thanks,
MBiswal

Ok, did you reimported the /metadata/iam-features-accesspolicy/event-definition/EventHandlers.xml from the BundlePatch folder?
Have you followed Addendum to OIM 11.1.1.5.6 Bundle Patch 06 Readme (Doc ID 1543504.1)?

Evaluate user policies

Hi All
I am facing an issue which should obviously have a solution and is very important a.Please post immediatly any solutions,workarounds or referneces to it if you are aware.
1. I have a group A which is goverened by an Access Policy
2. This Access Policy is provisioning Resources RA,RB,RC.
3. A user UserA is added to the group. The resource profile of the use now has three resources RA,RB,RC.
4. I now added another( new )resource RD to he Access Policy . Now the Access policy must provision RA,RB,RC,RD.
Now my question is , what do i perform for the existing users in the group to get the new resource RD?
Work arounds tried:
1. I have Retrofit Access Policy checked.(when the access policy is created)
2. I saw somewhere in the forum , that we have to run a scheduled task called Set User provisioned date. Which didn´t workout.
Please give me some clean solution on this. Is this really not an OIM OOTB feature? Does it need any configuration which is not published?
Thank you
Regards
Shashidhar

"I am currently using Evaluate user policies only.when there arfe more number of users this is being a very costly operation.
this is really making the system slow. is this the only way?can we not limit this task only to changed policies?"
As far as I can tell you only have two options:
For a small number of users, manually query up the users in OIM and click the "Edit" button on the User Details screen and then click "Save" (no other changes). This should evaluate the current access policy against the User and provision any missing resources.
Otherwise, for a large number of users, schedule the "Evaluate User Policies" out of your normall business hours (I wouldn't expect that you would normally be doing lots of changes to your access policies during the course of a normal business day unless you have an unusual arrangement with your access policies).

Problems with System Update 3.14.0019 after installation SP2

Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?
After this upgrade I view this error: "An error occurred while gathering user information."
Thanks for the help

A known issue. It wasn't supposed to be supported until SP2 is RTM. However, look at the stickied post in the forum for some bad news about SU.
x61s

The problem with forecast reports in SCOM 2012 after integration with VMM 2012

Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
   --- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support

I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices

I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
Sorry for my english, i am from Russia.

I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones!

How to prevent Evaluate User Policies to run for Bulk loaded users?

Hi,
I have an OIM 11G R2 environment, where i did a bulk load of abount 200,000+ users, and all the users' accounts were created using target recon.
How do I prevent the evaluate user policies scheduler from running for these users?
Any ideas are welcome.
Thanks,
Aravind Suresh

Hi,
I do have roles and access policies.
But i do not want them to applied to them at this stage as they already got everything through target recon.
Only for new users or these users on update i want the evaluate user policies to run.
Otherwise running evaluate user policies for these many users could be a very time and resource consuming task.
Thanks,
Aravind Suresh

Problems with a new IP phone 7906 after factory reset

Hi Guys
I am currently having problems with my new IP phone 7906 after doing factory reset and here is a video of it:
http://www.youtube.com/watch?v=vvCLtwIAwVw
I used this command I found on the net:
Hold down
while plugging in the phone and keep holding it until the message waiting indicator (red light) starts blinking. Then
release # and type 123456789*0# in sequence.
I was trying to switch my phone to sip and it also dont want to take tftp setup either.

Tim,
Found this on the net
http://www.cisco.com/en/US/ts/fn/620/fn62949.html
Might be woth giving it a go
6.Pull power on the phone (even if power is PoE).
7.Hold down the # key on the phone.
8.Continue holding down the # key and re-apply power.
9.While still holding the # key wait for the Message Waiting Indicator (MWI) light on the handset to start flashing.
10.Once the MWI light is flashing, release the # key and enter the following sequence exactly on the keypad:
3491672850*#
Once this sequence has been entered on the IP Phone, if all the network criteria above have been met, it should begin its recovery process. This process can take up to 15 minutes to finish. The phone may appear to be doing nothing during this time. However, if the phone does not recover after 20 minutes then it is possible that the recovery is stuck. In this case, re-examine your network and verify that steps 1-4 are in place, then re-issue the factory reset sequence.
* Note: The factory reset sequence is a way for a phone to clear flash and still upload to a valid firmware image. This is facilitated by the termxx.default.loads file, but requires that the image files listed in the termxx.default.loads file are available in TFTP for the phone to download. Open the termxx.default.loads file in any text editor. This loads file is essentially just a packing list showing all the OS and application files the phone needs to function. The files include a cnu, cvm, dsp, app and jar files. Please make sure that these files as listed in the termxx.default.loads file are in TFTP. ("xx" will be either "06" for the CP-7906G model, or "11" for the CP-7911G model.)
Additional Diagnostic Steps:
- Try a hard-coded IP address as a test to see if this resolves the upgrade failures. If it does, and the number of failing IP Phones is relatively few, this procedure may be the most expedient. After the IP Phone upgrades successfully, reconfigure the IP Phone to use DHCP.
- Try putting the phone on a hub or a different switch and see if this helps change the startup timing enough so that the upgrade completes successfully.
Regards
Alex

Sql Devloper 4.0.0.13 - problems with displaying user data types

Hi,
I have installed new version of sqldeveloper and have discovered some problems with displaying user data types. The data that is described as VARCHAR2 are displayed with ‘???’.
The problem persist in table view, script output and exported files.
My type is described as follows:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
when make select column from table that contains this type I get next results:
CASE 1:
SQLDeveloper Version 3.2.20.09; Build MAIN-09.87; JDK 1.6.0_43; Windows 7 64 bit
Select:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result:
        ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'TRAIK','TURBE','BABANA','3452','0',NULL)
END CASE 1;
CASE 2:
SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_40; Windows 7 64 bit
Select1:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result1:
ID ADRESALOKACIJA
         1 COMP.DPTY_ADRESA(124,4913,'???','???','???','???','???',NULL)
But if I select one element it is displayed normal.
Select2:
select id, a.adresalokacija.opcina
from dptr_saglasnosti a
where id = 1;
Result2:
ID ADRESALOKACIJA.OPCINA
         1 TRAVNIK
END CASE 2;
I have tried this scenario on three different pc with same output.
Pleas help me to get rid of the '???' in result.
Best Regards,
Omer

I tried on SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_45; Windows 7 64 bit; NLS setting is default
all data can show,No ??? in result
Test step as following:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE                                         NUMBER,
ID_DPSF_MJESTA                                        NUMBER,
OPCINA                                            VARCHAR2(100),
MJESTO                                            VARCHAR2(100),
ULICA                                 VARCHAR2(200),
BROJ                                   VARCHAR2(20),
SPRAT                VARCHAR2(20),
OSTALO                             VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
alter TYPE "DPTY_ADRESA" add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
CREATE TABLE dptr_saglasnosti (
adresalokacija        DPTY_ADRESA,
id    number);
INSERT INTO dptr_saglasnosti VALUES (
DPTY_ADRESA (65,225,'Vrinda Mills', '1-800-555-4412','sss','aaaa','eeeee','attta'),1 );
select id, adresalokacija from dptr_saglasnosti where id = 1;
ID ADRESALOKACIJA
1    HRCP.DPTY_ADRESA(65,225,'Vrinda Mills','1-800-555-4412','sss','aaaa','eeeee','attta')

Problem with"Evaluate User Policies"sch task after the upgrade OIM R1 to R2

Similar Messages

Maybe you are looking for