Problem with execution results (Control Center)

Hi,
I have created a mapping with output parameters.
Unfortunately, when i run the mapping, i can't see the values in
the output parameters through the job details reporting (control center).
Is there any patch that correct this problem ?
TIA,
Stéphan

Hi,I have also somewhat similar problem in creating content selector using e-business control center.The problem is that in the Window titled "Select Customer Segments", there are no radio buttons for specifying whether Qualifying visitors may belong to Any or all of these segments. Although it is mentioned in the documentation yet not available in actual.So when we try to save it the following error appears"Atleast one selected clause has not been completed. Offending clauses: [Action clause has not been completed.].Please tell me what to do?Regards,Atif

Similar Messages

Problem with E-Business Control Center

Hi,
I am trying to create a content selector using the e-business control cnter. When
I try to save it I get the following error.
The content selector is not complete. Please complete before saving. Could not
save the rule. Could not find GlobalContentSelectors to save the rule.
Can somebody help me with this?
Thanks and Regards,
Subramaniam

Hi,I have also somewhat similar problem in creating content selector using e-business control center.The problem is that in the Window titled "Select Customer Segments", there are no radio buttons for specifying whether Qualifying visitors may belong to Any or all of these segments. Although it is mentioned in the documentation yet not available in actual.So when we try to save it the following error appears"Atleast one selected clause has not been completed. Offending clauses: [Action clause has not been completed.].Please tell me what to do?Regards,Atif

Problem with a table control

Hi gurus,
I´ve a problem with a table control. It has 3 columns which one is a checkbox.
I can fill all fields but in the moment I mark the checkbox this line must be unwritable. How can I do it?
Thanks for all
Dani

Assign a function code to the checkbox column....
so when u check / uncheck any entry, PAI + PBO will be triggered....
In the PBO during the loop of table control, check the checkbox field value. if it is 'X', make the row readonly
by looping at screen and setting screen-input = 0 for rest of the columns.
like ...
LOOP AT tc_itab
       WITH CONTROL tc_test
       CURSOR tc_test-current_line.
   module set_row_readonly. " loop at screen and set input = '0' if checkbox is checked...
ENDLOOP.

Is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

is anyone experiencing problems with opening mission control from the desktop. Running mountain lion with parallels 7 and windows 7

I had been having a similar problem on Lion with Safari pdf files despite downloading the latest Adobe Reader XI.
I would constantly get the same messages - There was an error opening this document. The file is damaged and could not be repaired. And I would get a blank page when I tried to print the pdf if I tried printing from the Safari web page using File - Print from the top toolbar on my laptop.
Then I came across the grey Safari lozenge with action icons.
This allowed me, without downloading the pdf, to print the pdf file direct from the Safari page by using the Print icon on the grey lozenge that appears centrally three quarters down the screen.
Then I discovered that if I save the pdf using the Save icon from this same grey lozenge on the Safari page I can open and print this pdf version from my desktop.
I've tested it with a couple of different pdf files and these methods work using the grey lozenge icons but the same pdfs files don't work using File - Save As on the Tool Bar.

Problem with the table control BDC in FV60 transaction

Hi All,
I got the problem with the table control in FV60 transaction.
This is working for 900 line items.After 900 line items it is giving the problem like it is 1000th line item.You can post only 999 line items.
I know we can post only 999 line items,but in my file only 920 line items.
Please give me solution,if anybody come across this situation.
Thanks & regards,
rakesh.

Hello Rakesh ,
your file may have only 920 line items , but based on those line items, SAP may create few more new lines ( based on the clearing recon accounts , inter company transaction ...etc )...
regards
Prabhu

Problem with Creative Audio Control Panel

) Heya, I just bought a SB X-Fi Xtreme Audio and I've encountered a problem with Creative Audio Control Panel. My OS is Win7 x64; I have installed the newest drivers for SB. The problem is that I can't set my setup for headphones. I mean I can do that and it's working untill I turn off the PC or restart the system. After that it always sets for 2/2. Speakers. Any ideas how to make this thing to remember my settings the way I want it's Thanks!

- The problem seems to be fixed Here's the solution for my card: <a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493" title="Linkification: http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493"]http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493[/url]

Anyone else having problems with the music controls in the control center?

Ever since the iOS 7 post release update (iOS 7.0.2) I've have trouble with the music controls not working properly. Wondering if anyone else was experiencing the same issues....

IslandPrince89 wrote:
That actually helped but it seems that there are a lot of bugs in the iOS 7.0.2 ..
You can use this Link to send your Feedback to Apple
http://www.apple.com/feedback/

Hdmi sound problems with m9150f in media center

I am running a pavilion m9150f Q6600 vista 32 bit and GeForce 8500 gt graphics on a sony wega 55" lcd projection tv. Recently I have been having problems with media center sound. Recorded programs from standard channels (2-64) seem fine but hd channels (1341, for example) produce an error message stating "Unsupported Audio Signal. Please check device output." Which kills all sound from Pc. After shuffling through various output options, often returning to the original settings, and occasionally reinstalling devices or drivers, the problem is fixed. Then, seemingly at random, POOF!, error occurs again.I am at my wits end and am ready to throw my PC out in the street and hit it with a bus! Please help prevent its untimely demise.
Thank you.

Hi again
I have downloaded the Realtek sound driver from the Tosh page and unzipped it.
(I have chosen the driver for Vista!!! I suppose you use Vista???)
There is a folder called sound. Access this folder and run Setup.exe
But before you will start this procedure you could access the device manager (control panel -> computer -> device manager) and choose sound, video, and game controller. There you have to mark realtek AC and click on uninstall and reboot the unit.
After this sound driver removing you should start the new driver installation described above. (setup.exe)

Strange bug/problem in mobile server control center

I am running Mobile server control center for settings some properties for synchronisation. When I leave the system idle for few minutes, I get the following errors:
WTG-10109: Web-to-Go could not locate requested URL
Web-to-Go could not locate requested URL /admin/console/usrblank.html
Please contact the application vendor
Also this error "oracle.html.HtmlRuntimeException: HtmlFile.toString() IO Exception caught" .
I had to restart the server again. This happens all the time when I leave the system idle for few minutes.
I dont think this is a session problem. Even if this is session problem then it should give a valid error message.
My session timeout was set to 180 minutes(default).
Your suggestions will help us to evaluate the product.
Thanks a lot in advance.
regards
Yugandhar

RP
thanks but I tried all combinations and understand from metalink and other replies in this discussion forums, we need to remove the mobileadmin schema and reinstall it.But dont know why - is it a bug or some problem with installations.
I am still not able to enter as ADMINISTRATOR/ADMIN or administrator/admin(if case sensitive).
thanks in advance for suggestions.
regards
Yugandhar

Problem with the result of multiple queries in Web Intelligence (BO XI R2)

We have a problem with Web Intelligence reports. Behavior of the results is like if we selected the function Count in Designer the properties indicators. Same queries separated one for one report give correct results and together 7 queries in one report give correct results only for the first query and for others (6 others) same results for each date (if report is monthly) or the same result for each hour (if the result is daily) for all Queues tested (other which were not tested have result 0). Even the function Sum inserted into the report structure behaves weird u2013 we have the same result as in the filed (it is a copy of that result, not a sum). We tested queries together in SQL Developer and they give correct results, while in BO big query which contains script from Query 3, Query 2 and Query 1 cannot be completely executed (it executes without end).
We use Business Objects XI R2 SP3.
Thanks in advance.

Hi Peter,
I guess it is the problem due to the merged dimension and different granurality level in the BO queries. From the document properties uncheck the option of auto-merge common dimension objects or manually unmerge all the common dimensions
than give it a try.
I guess this would solve your problem. If not can you provide more query details like what objects you have used in the query.

Problems with iPhone Result of Bad Music???

In the last few weeks I've been experiencing problems with my iPhone. I did a lot of research online, and figured that it is NOT this "dead strip" that others have been having problems with; however, 75% of the time, the slide bar will not respond for the first 7-8 times I try and answer a call or turn off an alarm.
As time went on, the problem got more frequent and more involved. The phone might work fine all day, but as soon as someone tried to call, it starting going nuts, even after the call was over. None of the applications would respond to my touch and in the rare case that they opened, they would run incredibly slow and crash. The phone would freeze and need to be restarted. In the more recent days, during the restart, in which the only buttons I'm holding are the sleep/wake and home, my music would spontaneously start playing, starting alphabetically with the first artist on my list with no controls for me to stop it.
Most of the time, after a restart, the phone would continue to work fine, until a call comes in and starts the process all over...
After failing an attempt to fix the problems by deleting many songs and videos to clear up some room on the hard drive, I decided to restore my iPhone, as I have done once before, but this time not syncing with previously backed up data. I allowed iTunes to erase all the contents of my phone and then manually put most things back on. Since then, the phone has been working flawlessly. However, there is one problem remaining...I have not put any of my music back on the phone.
And now I am afraid to!! Even though all that same music has been on my phone for 3 months, and only now have I begun to experience problems, is it possible that the iPhone operating system is more fragile and more vulnerable to bad files that might otherwise work fine on my computer? I have no viruses on my computer, and I have never installed any of these problematic third party applications on my phone. And if it's not the music, what else could be causing these problems???

This is exactly what apple care is for. Why delay and torture yourself when you can take it in and either have it fixed or have it replaced?
Take it in to Apple

Problem with JDBC results calling simple stored procedure in VC 7.0

Hi all,
I am building a simple VC model which calls a stored procedure on a JDBC database. I have created the system in the portal, defined the alias and user mapping, the connection test is fine and the VC "find data" lists my bespoke stored procedure.
The stored procedure is :
CREATE PROCEDURE dbo.dt_getBieUsers
AS
select * from dbo.emailuserlink
GO
When I test it using query analyser, it returns 3 records each with the two fields I expect - user and email address.
I drag the model onto the workspace in VC and create an input form ( with just a submit button ). i drag the result port out to create a table. This has no fields in it.
I build and deploy as flex and the app runs, I click the submit button and SUCCESS! I get 3 records in my table each with 2 fields. The data is all correct. The problem with this is the fields are determined at runtime it seems.
I go back to the table and add 2 columns "email" and "address".
i build and deploy and run the app. Again I get 3 records, but this time the contents of all of the rows is not data, but "email" and "address". The data has been replaced by the header texts in all of the rows.
Can anyone help? Why isn't the data being put in my columns as I would expect?
I tried to build and deploy the app as Web Dynpro rather than Flex to see if it was a bug in Flex. The application starts but when I click the submit button to run the JDBC stored procedure I get a 500 Internal Server Error
com.sap.tc.wd4vc.intapi.info.exception.WD4VCRuntimeException: No configuration is defined for the entry JDBCFunction
    at com.sap.tc.wd4vc.xglengine.XGLEngine.createComponentInternal(XGLEngine.java:559)
    at com.sap.tc.wd4vc.xglengine.XGLEngine.getCompInstanceFromUsage(XGLEngine.java:362)
    at com.sap.tc.wd4vc.xglengine.XGLEngine.getCompInstance(XGLEngine.java:329)
    at com.sap.tc.wd4vc.xglengine.wdp.InternalXGLEngine.getCompInstance(InternalXGLEngine.java:167)
    at com.sap.tc.wd4vc.xglengine.XGLEngineInterface.getCompInstance(XGLEngineInterface.java:165)
The JDBC connection I am using has a connection URL of jdbc:sap:sqlserver://localhost;DatabaseName=BIEUSERS
and a driver class of com.sap.portals.jdbc.sqlserver.SQLServerDriver
Can anyone solve my wierd problems?
Cheers
Richard

Hi Richard,
After you drag and drop the data service, right click on it and choose "Test data service". Then click on "Execute" and after you see the result on the right, click on "Add fields" button (inside the same window). Now you'll see that the fields are on the tabel. This is required only for JDBC data services, since this data (how the resultset is built) is not know in DT and it needs to be run firest - then analysed and only then you have to add the fields to the table).
Regards,
Natty

Problems with the items (control) in forms 9i (Re)

Hello,
I write this problem in a other post and but don't have any feedback about it(So I will give another try:-) )
The problem that I will describe don't happen all the time and is very rare but I want to know if it's a normal bug of forms or something more special of our PL/SQL code...
So here we are.
Is there others developpers here that have problems with the mouse cursor of the user that seems to be "jammed"(blocked, trapped) in a text item (or another control, like a list item). When this problems happen, the user can't go on another field of the forms with his mouse cursor(Mouse click), the only thing that can resolve that is to refresh the page with Internet Explorer, and after that, he is free to go on another field of the forms.
This problem is very rare but happens sometimes.
Thanx in advance!

Hi,
This problem is due to failuer of navigation of mouse cursore. For more specific solution can you give the error message and error code, So that we can have exact picture. Waiting for error code......

Problem with programmatically control histogram color

Hi,
I'm developing a function to display multiple channel histogram. But I can not programmatically control the color. I use XY graph to display, and there's no problem with other type of plots.
Attached is the example vi I use for the test. Please tell me if I make any mistakes.
Inhaler
Attachments:
histogram_colortest.vi ‏38 KB

instead of using plot.color, use the fill/point color.
-Joe

Problem with a Table Control Scroll Down.

Hi,
I´m working with a table control in which I select one of the many lines the table contains and I move it into a structure, I delete the data of the table control internal table and I move the selected line back into the internal table to show only that record. My problem is the following:
Whenever I have to scroll down to select a line, the selected line doesn´t appear afterwards. I believe that it´s because the scroll bar disappears and keeps on showing the line where the record I selected used to be and because the selected record is added in the fist line of the TC.
Is there any way of avoiding the disappearrance of the vertical scroll bar? Or how can I show the record added in the first line if the TC only displays the position where the selected record used to be?
This is the logic I use to show the single record.
READ TABLE TI_ASIGLOT WITH KEY PUSH = 'X'.
IF SY-SUBRC = 0.
    MOVE-CORRESPONDING TI_ASIGLOT TO ST_ASIG.
    CLEAR TI_ASIGLOT.
    REFRESH TI_ASIGLOT.
    MOVE-CORRESPONDING ST_ASIG TO TI_ASIGLOT.
    ST_ASIG-CPEND = ST_ASIG-GAMNG.
    MOVE ST_ASIG-CPEND TO TI_ASIGLOT-CPEND.
    APPEND TI_ASIGLOT.
Thank´s and regards.
Lucila

Well, I´m going to anwser my own question. The problem was that in my TC the top field value was the line number of the record I've selected. So the only thing I had to do to fix it was to asign 1 to the field TC-top_line inside the form where I select the record.
READ TABLE TI_ASIGLOT WITH KEY PUSH = 'X'.
IF SY-SUBRC = 0.
    MOVE-CORRESPONDING TI_ASIGLOT TO ST_ASIG.
    CLEAR TI_ASIGLOT.
    REFRESH TI_ASIGLOT.
    MOVE-CORRESPONDING ST_ASIG TO TI_ASIGLOT.
    ST_ASIG-CPEND = ST_ASIG-GAMNG.
    MOVE ST_ASIG-CPEND TO TI_ASIGLOT-CPEND.
    APPEND TI_ASIGLOT.
    W_INI = 1.
ELSE.
    MESSAGE I889(100) WITH TEXT-T07.
    EXIT.
ENDIF.
z_result-top_line = 1.
(z_result is my TC )
Best regards,
Lucila

Problem with execution results (Control Center)

Similar Messages

Maybe you are looking for