Problem with exhange setup. Especially regarding kalender

Can't sync. my kalender with my exhange account.

Hi,
We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
Regards.

Similar Messages

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

Problem with TMS setup in HA systems

Dear colleagues,
Our team have installed a new production environmnent to ECC in HA. We have a ASCS in cluster and two dialog instance in each server(local instance).
A virtual host GPPR3CIB and two instances in local, node GPPR301 and node GPPR302. This is an ECC 6.0 on Windows 2003 Server and SQL server 2005.
The architecture is as follows:
- GPPR301 node:
   - Virtual ASCS ASCS_0 (message server)
   - ABAP Primary Instance PPR301_1 (disp+work)
   - ERS (Enqueue replication server) instace ERS_10
- GPPR302 node:
   -ABAP Additional Instance PPR302_2 (disp+work)
   -Virtual Database Instance GPPR3DB
   -ERS (Enqueue replication server) Instance ERS_10
Once the installation is complete you need to apply SAP Note No. 943334 - "TMS setup in high availability systems" to set up high availability STMS. The problem is to distribute the configuration after running
the report " 'TMS_MGR_LOADBALANCING" described in SAP note.
The message indicates problems trying to run the command tp.exe. It has followed the note No. 1010990 and we have checked the folder permissions of the kernel but the problem persists.
Any information or help regarding this type of setup would be welcome.
Thanks.

Hi,
We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
Regards.

Problem with J2SDK setup

Hi all,
I am experiencing problems with my J2SDK setup. I think my problem due to many previous versions of JDKs.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
I would be really grateful to you (and anyone else) for help with this problem.
Regards,
Vipul

Hi,
Thanks for getting back to me. I have altered my CLASSPATH and path. Unfortunately it is still not working. I have run java using the full path to the jdk and the jars are loaded in from the right place, but I still get the noclassdeffound error. I have removed all references to CLASSPATH and PATH. When I run with the verbose option (with no ref to the jdk in any variable), the jar files are loaded in from C\program files\java\j2re1.4.2_03! But there is no reference to this location in any variable.My j2sdk is installed in C:\j2sdk1.4.2_03.
Currently ,
CLASSPATH =".;C:\Program Files\eclipse\plugins\org.eclipse.swt.win32_2.1.1\ws\win32\swt.jar;C:\cygwin\usr\share\postgresql\java\postgresql.jar; C:\Program Files\Database Report Writers\DB Drivers\pg73jdbc.jar "
And PATH = " %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\cygwin\bin;C:\Program Files\Common Files\Adaptec Shared\System;C:\MSSQL7\BINN;C:\tools\ant\apache-ant-1.5.3-1\bin;C:\Program Files\cvsnt;C:\tools\ant\apache-ant-1.5.3-1\bin;C:\tools\maven\maven-1.0-beta-11-SNAPSHOT\bin "
Please help.
Ciao,
Vipul

Problem with Multiserver setup in LMS4.01

Hello,
we have a problem with a Multiserver setup in LMS4.01.The devices that should be manged in the slave server stay in unmanaged state.
Our goal configuation is:
Server-1 = DCR-Master
Managed devices = 4200
Apllications = RME, CM, IPM
Server-2 = DCR-Slave
Managed devices = 150 (this number is a subset of the 4200 devices on Server-1)
Applications = DFM + HUM
We created on the master-server a user-defined group with 150 critical devices and we configured a Master-Slave Setup as described in the documentation:
- Master Server - creating a peer user
- Slave Server - Creating a system identify user (with the same name/password as the peer user on the master server)
- Master + Slave Server - Creating certificate on slave + master server and import these certificates to each other
- Master Server - Enabling DCR-Master mode
- Slave Server - Enabling DCR-Slave mode
- Slave Server - Enabling at device allocation settings the functions <Inventory Mgmt>, <Fault Mgmt> and <Performance Mgmt> only
- Slave Server – Creating policy configuration for device allocation for the user-defined critical device group only
When I create the policy configuration on the slave server I can see all devices in the DCR and I can also see the user-defined group with the critical devices that I created on the master server. So there shouldn't be a problem with certifiactes or the peer/system identify users.
Now I would expect that I see the 150 imported devices in the slave server in a managed state. But when I check “Inventory> Device Administration> Manage Device State” in the slave server I see all 4200 devices in unmanaged state. And this looks wrong.
Any ideas about it?
Thanks + Regards
Hendrik

Hi Tomasz,
Nope. No solution from anyone. I had been fighting with it with several SAP Notes but not yet success. I opened a ticket with SAP but no solution yet.
I think it caused by our already existing SSL and integration with federated Portal.
I don't have any system with the same software to compare.
I followed all related notes by the book. My system was upgraded from BW 3.0B to NW04s SR1 SP Stack 10 then new Java add-in installation with usage BI-JAVA & EP SP Stack 10 .
I will conquer this some day- Wish me luck!
Thanks.
Mimosa

Problem with audio setup of IDT

Sorry, if this question isn't for this forum, but I need the solve of this problem
HP Pavilion dv6-6c53er.
Hello, it's me again.
My notebook is dv6-6c53er with two earphones outs and one microphone. So, I want to ask you a question. Can I set my earphones outs for different tasks or can I set them as independed outs. My English isn't so good, but that isn't so good, when i'm listening my music and when i get a message in skype - my music in earphones out is lost, but I hear Skype (soung of message), and music is playing on beats speakers, and past 2 seconds - again (in earphones - music, on speakers - nothing).
So, the problems are:
1) How I can set settings for each earphone out (to do it independed or to play different sounds)?
2) What Can I do with problem with Skype and outs?
3) Help me, please with settings in Traktor, because at Native Instruments forum I didn't receive resolve of my problem...
And problem with Traktor is:
I can't to set each earphone out for playing each deck in Traktor.
Help me, please with this problems!
Yours, Xardas007

I have the same problem. I was however able to install 9i. Then I was able to use the 9i Installer to install the 8.17 software. But I can not run the 8.17 Database Configuration Assistant. It will not start same as the 8.17 setup.exe.

Problem with keyboard setup.

Hi
I am having problem with my keyboard setup. When clicking the option key (alt) and a number key no symbols appear. Instead the computer gives away a beep. If I view the Keyboard viewer the symbols appear correct. I have created a new user and tried logged in as the new user. Then the symbols appear instead of the beep. What strange settings can I have made?
Thanks for your help.
/Erik

Yo
I seemed to have a folder in my users Library folder called KeyBindings and a file in there called DefaultKeyBinding.dict. When removing this everything was back to normal. So seems as though the file was steeling my option key mapping. Not good.
/E

Problems with email setup on my E72

I have problems with my email setup, the phone will not notify me when a new email arrives. I have had the unit in the shop, tried to get help form my service provider, have sent it back for repairs and it still will not work properly. The repair centre told me that it does have the latest software on it and said it should work fine. It,s a brilliant phone but this so frustrating. I would appreciate some help to get this sorted. Thank you, fuzzy2

Check homescreen applications-> e-mail notification.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Problems with Email Setup

I purchased a Blackberry Curve 9330 a few days ago, and am having problems with the email setup. I previously had an older model of the Curve, so have used Blackberry for email before. I'm going to Messagex ---> Options ---> Email Account Management and I get the following message:
"A new BlackBerry device has been detected. You must move email account(s) to resume email delivery to your BlackBerry device. Email delivery to your old device has been stopped."
It then lists the three email accounts I had on my previous Blackberry, and I click on "Move". It prompts me to enter my passwords for each email address, I do, and it says "Your password has been successfully validated." It shows all three email addressess. I return to my home screen, and the email icons are not there. I go back to Email Account Management, and it prompts me to "move" my email accounts and enter passwords all over again. I've done this at least 20 times at this point.
HELP!

Hi and Welcome to the Community!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your wireless service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Instalation Disc Missing, problem with language setup

Hello Microsoft
I have problem with installation of windows 7 home premium (x64). I got licence for polish edition of your OS. Now i was forced to reinstall this, but i lost my disc. I have found an english wersion of installation disc, so i thought hell yeah i will install
this and switch language later as many yours and external help sites says.
Well of course it can't be that easy, BECAUSE YOU HAVE BLOCKED LANGUAGE CHANGE in this particular OS.
So i would like to ask, can you provide a download link for polish installation disc for win home premium (x64)? (I have found lot of possible language versions but not polish)
By the way i have also tried to install language pack manually. What a suprise your clean fresh installed OS deletes any *.cab files, including the ones stored on external drives. I have my own *. cab packages with my personal files witch were also deleted
and if i had'nt made a backup - i would be seriously angry.
With regards

Sorry, but how about we stay aut of "Basic FAQ" answers?
1.) Windows upgrade anytime is no longer avaible for online purchase - this is my message when i run upgrade as 2nd link follows.
2.) I don't understand why im am suposed to buy and upgrade to ultimate wersion when USA/UK, spanisch, french, dutch!, danish!, italian, german or even czech can download an installation disc easly?
Even for other foreign customers you are providing the download disc link on this support site like for example:
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/where-can-i-download-windows-7-iso-i-have-a/7d964b05-2be9-4800-bc7f-3ca30356fc3d
http://social.technet.microsoft.com/Forums/windows/en-US/c0e78d7a-883d-4caa-a8c0-1e127a14612a/windows-7-home-premium-download
P.S I really tried to look for answers myself, but most of the links even on microsoft support in other topics are DEAD or redirected to windows 8 store.

Since upgrade to FF13: having problems with flash content, especially videos when scrolling/multi tasking--freezing the video and sound for 1-2 sec. Any advice?

At first, the same night I decided to update--things were fine but after using the browser hours later a second time: some flash scripts would simply not respond and freeze the tab the content is on or like in my question, constantly stutter. The problem for flash videos only seem to occur when I scroll onto links or when moving up/down a page. I encountered similar problem with FF7--like that time, I installed/uninstalled the flash player and even resetted firefox but to no avail--the problem persisted. It is also present while in safe mode. P.s. such problem is seemingly not present in other browsers which brought me to ask this question for assistance.

I have the same issue. When I scroll past embedded videos, such as YouTube videos, they are torn or disrupted. The video may shrink in size when I scroll, etc. Issues only arise when scrolling past the video. When playing, no issues.
I've tried the following that did not help:
Safe mode
Video driver up to date
Flash completely up to date
All plugins up to date.
Only started happening when I updated to FF13.

I have problem with the voice especially with the skype programe.

Good day. I have a problem with my mini laptop (compaq mini Product :LF792EA#A2N). the voice is working good on yahoo and msn chat , but on skype and some other programes like tange , nymgo , the voice is totally not working .i can hear them but nobody can hear me ,, would you please advice me for what to do ?? that will be highly appreciaed.

can anybody provide me with the solution

HT4623 having problems with ios7 setup

downloaded ios 7, trying to set it up and i get connect to itunes part and then get a message on my computer saying there is a problem with my phone and visit the services centre but nothing has worked

Maybe you should try doing what the message says...

Tran.FBL1N - problem with showing correct amount regarding partial paymants

Hello,
Every day at my workplace I use transaction FBL1N which I use to see how much money I own to vendors and also to se how much is payed. However I have problem whit showing payed amounts for partial paymants (transaction F-59). For example:
I own some vendor EUR 20.000,00 and I decide to pay him EUR 15.000,00 using partial paymant option (transaction F-59) because that's amount I have at the moment on my bank account. After that, when I choose that vendor using transaction FBL1N (with enabled option Open items on current date) so I coiuld see how much it is left to pay him, amount EUR 15.000,00 is not subtracted and reprt is still showing me that I own him EUR 20.000,00 which ofcourse is not correct.
I also must note that in case I payed that vendor full amount I wouldn't have this problem and transaction FBL1N would show correct amount.
I hope someone can advise me about this and help me solve my issue.
Any help is appreciated and many thanks in advance for prompt replys.
Cheers;)
Adi
Edited by: samnovice on Jul 18, 2011 1:22 PM

thnx loky46, I understand it better now - I hva one more important question regarding this:
Is there any way I can found total amount I own to one or more vendors (_regardless_ if it is full or partial paymant or combination of both paymants)? For example:
Line 1 || VENDOR I || Eur 20.000,00 RE
Line 2 || VENDOR I || Eur 15.000,00 AB
TOTAL Eur 5.000,00
but without using this option:
you have to add the field "invoice reference" to your line layout and make a subtotal on it.
Also, is it possible for line Eur 15.000,00 to become Close item because that part is payed and for rest of amount of Eur 5.000 to be Open item because is still not payed. I assume this can't be done but on this way I could now exact total amount of money which I own to my vendor(s) and it would be a of great help to me in every-day work.
Thank you.
Edited by: samnovice on Jul 19, 2011 3:26 PM

KB2956170 Problem with profile setup - Outlook 2013

After installing KB2956170, any new users that do not already have an Outlook profile cannot access mail. When attempting to connect to the Excahnge server, you never get prompted for your smart card credentials and then the profile setup fails.
If you remove the update, everything is fine again.

Hi,
It's the first time that I have seen this issue, would you please provide the exact error message about this issue, and could you share your detailed system info? Also, if you have any log files about the issue, kindly share with us by sending them
to this email account: [email protected] (please use the link of this thread as the subject), this will help us investigate this issue.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Problem with exhange setup. Especially regarding kalender

Similar Messages

Maybe you are looking for