Problem with Export Schema form CCM 2.0 SP4

Hello all,
when I am trying to export schema form CCM I am getting the following exception /CCM/CX_EXPORT_ERROR
The exception occurred at following point
program: /ccm/cl_catalog_model=======cp
include: /ccm/cl_catalog_model=======cm01c
line: 28
any hint?
Gordan

Hello all,
i'm facing the same problem with CCM 2.0 SP6..
Anyone know the solution?
Thanks for your help!
Antonio

Similar Messages

Summary: Problem with export (maybe...terminated sucEE to XE issues exp/imp

Summary: Problem with export (maybe...terminated successfully with warnings) and import (IMP-00022: failed to process parameters)
I used PL/SQL developer to make a parameter file (initially I used it to export, then I just stole the file to try again). It contains 100 tables from a single schema.
Export from prod DB using exp parfile=test.par: Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
server uses ZHS16GBK character set (possible charset conversion)
About to export specified tables via Conventional Path ...
. . exporting table CONTRACT_INFO 12 rows exported
EXP-00091: Exporting questionable statistics.
'Export terminated successfully with warnings.' !!!I want to import into the cs2_user schema (same privileges as on the production DB) trying:impdp 'sys as sysdba'@danieldb schemas=cs2_user dumpfile=test01tables3.dmpThat gets the error: UDI-00014: invalid value for parameter, 'attach'
I then thought maybe you have to use imp/exp or impdp/expdp instead of a combination (exp + impdp) so I tried: imp 'sys/admin as sysdba'@danieldb touser=cs2_party_owner file=test01tables4.dmpbut then I just get: IMP-00022: failed to process parameters
Anyone see why its all failing? :s
Mike

you must input SID name into single-quotes like:
C:\Tools\Oracle\product\10.2.0\db\NETWORK\ADMIN>expdp 'sys/manager@stb as sysdba'
Export: Release 11.2.0.1.0 - Production on Thu Feb 9 13:46:16 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
UDE-06550: operation generated ORACLE error 6550
ORA-06550: line 1, column 11:
PLS-00201: identifier 'SYS.DBMS_UTILITY' must be declared
ORA-06550: line 1, column 11:
PL/SQL: Statement ignored

Problem with Exporter for MS Access 3.2 in SQL Developer

Hi,
I have problem with exporting tables and data from MS Access to XML with Exporter for MS Access 2000.
This error ocurr: 'Error #5 - XML Exporter'
When I use Exporter for MS Access 2002 this error ocurr: 'Error #3478 - XML Exporter'
Any leads how to solve this problem ?

Thread moved to Forum Home » Database » SQL Developer
SQL Developer
Please, stay tune there.
Nicolas.

Problem with exporting a report to excel vial citrix server

Hi,
We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .
Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
Can any body have idea on above mentined?
Regards,
SK.

I understand that you're trying to download the file to a local computer through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

I'm having problem with exporting video from premiere pro cc 2014

I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
When I click Export and media, the window for exporting appears and it starts exporting video.
But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
It literally says it has a problem with compiling, but I don't know what the real problem is.
I tried many things like restarting computer and Premire Pro but it's no use.
But it works when I use Adobe Media Encoder CC 2014 for exporting video.
If anyone knows any possibilities about why this problem happens, please let me know.

I'm having a similar issue. When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render. Randomly, at some point in the process, the render just stops and the ETA just keeps climbing. I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it. Even a clean re-install of CC 2014 doesn't work.

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

Problem with database schema objects in the entity object wizard

Hi All,
When creating a new entity object, I am facing a problem with database schema objects in the entity object wizard, database schema objects (check boxes for tables,synonyms...) are disabled. Actually I am using a synonym but I am not able to select the synonym check box.
Can any of you folks tell me how to enable the database schema objects (check boxes for tables,synonyms...).
Thanks in Advance.
Raja.M

Make sure your using rite version of jdeveloper..
Make sure your using apps schema and check whether your able perform DML operations in the schema vis sql developer.
--Prasanna

Problem with exporting devices to non-global zone

Hi,
I've problem with exporting devices to my solaris zones (i try do add support to mount /dev/lofi/* in my non-global zone).
A create cfg for my zone.
Here it is:
$ zonecfg -z sapdev info
zonename: sapdev
zonepath: /export/home/zones/sapdev
brand: native
autoboot: true
bootargs:
pool:
limitpriv: default,sys_time
scheduling-class:
ip-type: shared
fs:
dir: /sap
special: /dev/dsk/c1t44d0s0
raw: /dev/rdsk/c1t44d0s0
type: ufs
options: []
net:
address: 194.29.128.45
physical: ce0
device
match: /dev/lofi/1
device
match: /dev/rlofi/1
device
match: /dev/lofi/2
device
match: /dev/rlofi/2
attr:
name: comment
type: string
value: "This is SAP developement zone"
global# lofiadm
Block Device File
/dev/lofi/1 /root/SAP_DB2_9_LUW.iso
/dev/lofi/2 /usr/tmp/fsfile
I reboot the non-global zone, even reboot global-zone, and after that, in sapdev zone, there is no /dev/*lofi/* files.
What i do wrong? Maybe I reduce my sol 10 u4 sparc instalation too much.
Can anybody help me?
Thanks for help,
Marek

I experienced the same problem on my system Sol 10 08/07.
Normally, when the zone enters the READY state during boot, it's zoneadmd will run devfsadm -z <zone>. In my understanding this is to create the necessary device files in ZONEPATH/dev.
This worked well until recently. Now only the directories are still created.
It seems as if devfsadm -z is broken. Somebody should issue a call to sun.
As a workaround you can easily copy the device files into the zone. It is important not to copy the symbolic link but the target.
# cp /dev/lofi/1 ZONEPATH/dev/lofi
Hope this helps,
Konstantin Gremliza

Problem with navagation of forms

Hi everybody
I have a problem with navigation of forms
I have two forms say a and b.In form a i have a button and i want, when i press that button the form b should open.I wrote when_button_pressed trigger for that button in form a as open_form('b'); Raise form_trigger_failure;
When i run form a and press the button form b is not opening.It is giving me a message as 'form b cannot be opened'
Can somebody tell me where i am wrong.I have compiled b.
TIA
Prajakta

Why are you using Raise form_trigger_failure;
You don't need it.
Try doing open_form('b.fmx');
If this doesnt work
I think your problem is that the fmx file for form b is not in the path to be found.
make sure to include the direcoty in the forms60_path or have it in the same directory as form a.

Problem with Exporting Data to Excel

Hi Everyone,
I have problem with exporting the data to a excel file. I am using a XP
system in German which uses comma "," as the decimal point , and I also set
"Use localized decimal point*" under the FronPanel Options to be true. But
the exported excel file can not recognize (or just ignore) the comma for a
whole column (flow rate), for examle "1,234" (1.234 in non-german system)
would be 1234. But if I open its text file where the data came
from by calling Excel directly, there will be no problem. Is this a bug of
LabVIEW, or I forget some settings?
Thanks a lot!
Le
P.S: The LabVIEW version is 8.2.1 and the Office version is Office2007.

Hi Le,
Sound familiar; here in The Netherlands we have the same problem. That is why we use the English versions for XP and Office.
I don’t quite understand how you interface to Excel. Directly with ActiveX or through a CSV file.
Can you explain a bit more ?

URGENT : Problems with exporting a translated application

Hi ! I have a problem with exporting a translated application. Effectively, I exported both applications (The normal and the translated version). I want now to apply the translation XLIFF. I want to know if it is possible to apply my old XLIFF file. The problem is that I can't select the same ID for my application.
I really have problems!
Anyone can help me ?

When I import the translated version, the translation works a little bit. Effectively, all my reports appear but there is no item that appears.

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

I am facing a new problem with xml schema, plz help me

Hi @,
I am facing a problem with xml schema validation. Below is my code.
public void initialize(String cfgFileName) {
try {
try {
DOMParserWrapper parser = (DOMParserWrapper)Class.forName("dom.wrappers.DOMParser").newInstance();
parser.setFeature( "http://apache.org/xml/features/dom/defer-node-expansion",true );
parser.setFeature( "http://xml.org/sax/features/validation",true);
parser.setFeature( "http://xml.org/sax/features/namespaces",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema",true );
parser.setFeature( "http://apache.org/xml/features/validation/schema-full-checking",true );
Document document = parser.parse(cfgFileName);
System.out.println("Vijay .. code .. damar\n");
}catch (org.xml.sax.SAXParseException spe) {
} catch (org.xml.sax.SAXNotRecognizedException ex ){
} catch (org.xml.sax.SAXNotSupportedException ex ){
} catch (org.xml.sax.SAXException se) {
if (se.getException() != null)
se.getException().printStackTrace(System.err);
else
se.printStackTrace(System.err);
}catch (Exception e) {
System.out.println("Caught unknown exception : \n");
e.printStackTrace(System.err);
System.out.println("Vijay .. code .. success\n");
DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();
//docBuilder.setErrorHandler(myErrorHandler);
cfg = docBuilder.parse(new File(cfgFileName));
cfg .getDocumentElement ().normalize ();
} catch (Exception e) {
e.printStackTrace();
In the above code I am parsing the xml file and i am doing schema validation. Schema validation is proper and it is validating correctly. Only problem is that, It is validating and showing error correctly correctly but it is not catching that error.
For clear understanding I am printing one statement before parsing and after parsing.
SYSTEM.OUT.PRINTLN("Vijay .. code .. damar\n") this is before parsing
SYSTEM.OUT.PRINTLN("Vijay .. code .. success\n") this is after parsing
Here what is happening means, It is validating correctly and showing error :
[Error] nw_layout-new.xml:800:97: Datatype error: Value 'y' does not match regular expression facet 'yes|no'..
Vijay .. code .. damar
Vijay .. code .. success
Here it is showing error and still continueing not catching.
Plz give solution for this.
Thanks
vijay K

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

Problem with export files

Hello,
I have got the version 5.3, original.
I have a problem with export files. After work with a lot of picture in dng format, I try to export all picture in jpg format, but the number of pictures exported are less than the original number.
Why?
Thank you in advance

There is nothing you are doingt wrong, the web people need to check their Flash stuff, most importantly realyl include al lthe files you provide them with. there's a reason why it spits out 4 files...
Mylenium

How can I fix this problem with exporting Pages files?

Hello,
I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
Does anyone know how to fix this problem?
Thank you in advance!
Best regards,
Filipe

Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
Likewise a display might not fail until powered on and off a few hundred times.

Problem with Export Schema form CCM 2.0 SP4

Similar Messages

Maybe you are looking for