Problem with Express Connection Utility, acces provider DLL

I have installed Oracle Financial Analyzer 6.3.0, and when i want to start the program Express Connection Utility i get the error "Can't find access provider DLL" I don't know what the access provider dll's are, could some one say what those DLL's are or help me with my problem.

Ok thank you for clarifying that for me.
Try setting up the extended network again. This time, keep the Express (AX) in the same room as the Time Capsule (TC). Allow both base stations to restart.
Leave them together until you can verify that the extended network configuration is working. Once verified you can place the AX at the desired location. Note: Placement of the extending base station is critical for overall bandwidth performance of your extended network. Please check out the following AirPort User Tip for details.

Similar Messages

I have problem with Access Connections on L412 after that utilyty upgrade

I have problem with Access Connections on L412 after that utilyty upgrade in early August. Windows 7 Ultimate/x64.
It stops connecting to WPA2 Enterprise (AES-CCMP), Microsoft PEAP, no server cert, with any credentials I try to use. The same account(s) works with native Intel manager on other notebooks and on mobile devices. I lost the wireless connectivity to enterprise WiFi network.
And, after deinstallation of Access Connections, the inability to connect keeped intact with native Win7 WiFi management.
I think, something was broken in Access Connections 5.83 Build 83C753WW and some registry settings/ dll modules were altered but not returned to normal after deinstall.

Access Connections is definitely broken for WPA encryption. Both versions 5.02 and 5.84 fail for me. If I use the Windows XP wireless configuration instead of Access Connections, everything works.
Does anyone know how to report this to Lenovo? I chased links around the web site but couldn't find a place.

When trying to install a wireless printer, the WEP password says its incorrect. Is this a problem with the airport, my Internet provider or HP? I know the password is correct.

When trying to install a wireless printer, the WEP password says its incorrect. Is this a problem with the airport, my Internet provider or HP? I know the password is correct.

Your AirPort Extreme supports WPA.
WEP is outdated and considered fairly useless, so use WPA.
Be sure you are using AirPort Utility 5.6. If you are not running Lion then use AirPort Utility 5.5.3.
AirPort Utility 6.0 cannot administer 802.11b/g base stations.

SAP Screen Personas error "A problem with network connectivity has been detected"

Hi,
We just installed Personas release 100 SP02 and performed the
configuration steps necessary. But when we acces the url and logon to
personas we get the following erre
A problem with network connectivity has been detected.
Please check you connection and refresh your browser.
Any help to solve this issue would be appreciated.
Best Regards.

Please use this checklist to see if everything is correct:
1. restgui service handler class has CL_HTTP_EXT_ITS_BASIC
2. SPRO -> Sap screen Personas -> Maintain system has
       - 3 letter system id
       - "Server.Url" without typo and value in http(s)://<SERVER>:<PORT>/ format
       - "Service.Uri" without typo and value as /restgui
3, Note 2026487 is installed
4. If target system is different from source system then you are able to access the following
         - http(s)://<TARGETSERVER>:<PORT>/clientaccesspolicy.xml
         - http(s)://<TARGETSERVER>:<PORT>/crossdomain.xml
5. role is assigned to user under /n/persos/admin_ui -> User Maintenance -> Search -> Show user -> Role
If you still get error, then if you are using SSO, please check if you have configured login/create_sso2_ticket parameter correctly.
Thanks
Chinthan

TS1398 hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls hel

hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls help

At the very least, I recommend you restart your router, (your internet box).
More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it? Did you do anything to change your setup, and if you did, what?

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

Problem with JCo Connection Pool

Hi,
I have a problem with using an RFC Model in my WebApplication. So sometimes the access to the function block works, and sometimes it doesn't work. Now I know, that there is a problem with the connection pool. Look at this message:
com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool WD_X24_MODELDATA_DEST_CPIC_REKTO_DE_useDefinedUser is exhausted. The current pool size limit (max connections) is 10 connections.
So it looks like a problem with closing the JCo Connections after using. Do know where the problem is? Because I'm using many other function blocks with no problems.

Hello,
You need to increase the pool size via Visual Administrator.
Server 0 -> Services -> JCO RFC Connections.
Change the pool size from there. I believe a restart is in order.
Regards,
Jan

Problems with ipod connection.

Problems with ipod connection.
I have problems to connect my ipod to computer windows 7.
When I connect I get the following error:
"We encountered an ipod, but could not be identified correctly. Disconnect and reconnect the ipod and try again."
And it recognizes the ipod when trying to go play music or videos make me the following error:
"Error while trying to copy on disk. The device is not connected."
I've uninstalled all apple applications and re-installing, as I formatted the ipod and continues to set the same error.
What else can I do?

Hello,
While your symptoms don't exactly match the descriotion, this article may be usefull in discovering if there is a setting on your computer that is causing this to happen.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W.

Every time I try and update my iphone 4 to ios 7.1 in iTunes 11.1.5 it says "connection reset" even when there is no problem with my connection

I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
The exact error message is as follows:
"There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later."
I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
Any help you can give me would be appreciated.

Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].

See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?

I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?

Morning Gjakleinmark,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario

Problems with Document Connect

I have a problem with Document Connect. I am unable access office live workspace.
I have been on the help line with microsoft but they were unable to help.
Then I went to an apple store and was informed by one of the sales assistance that Document Connect never worked with the apple. Well what was the point in having it then?

I wish I knew what Document Connect is. I'd bet I could fix it. Not really, but what is it?

I have an Ipad mini with IOS7. A few days ago I began to have problems with wifi connectivity. I can connect to wifi with Google but cannot navigate in Safari nor any of my aps are able to acess wifi. Very strange. Not sure what to do!

I have an Ipad mini with IOS7. A few days ago I began to have problems with wifi connectivity. I can connect to wifi with Google but cannot navigate in Safari nor any of my aps are able to acess wifi. Very strange. Not sure what to do!

Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You may have to re enter your Wi-Fi password.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections

Problems with Express C2 version...

Hi all,
I have been getting some strange problems with Express lately. I get
the following message about an umimplemented method:
CurrentServiceDetailWindow: Got Exception.
SYSTEM ERROR: The method SetWindowTitle is unimplemented. It should be
implemented in a generated class.
Class: qqsp_ImplementationException
Detected at: CurrentServiceDetailWindow.SetWindowTitle
Last TOOL statement: method ResolveFormWindow.SetWindowTitle, line 1
Error Time: Wed Apr 23 18:37:13
Exception occurred (locally) on partition
"Resolve_1_0_MainWindows_CL0_Client", (partitionId =
8315DCCE-B5A8-11D0-9557-94203799AA77:0x162:0xc, taskId =
[8315DCCE-B5A8-11D0-9557-94203799AA77:0x162:0xc.122]) in
application
"Express_cl2", pid 120 on node ckdecalpha1.crosskeys.com in
environment
CentralEnv.
The method (SetWindowTitle) that Express is complaining about is my
own method, that I added a while back. Why should Express be
complaining about a method that it doesn't generate.
I've performed numerous Force Complete Generation on the business
model and application model, but I still get similar results of
unimplemented methods
I'm wondering if this could be linked to a previous corrupted repository
that we had before. We had to create a new repository and re-imported
exported projects (*.pex ascii format). Ever since then, I've been
getting this problem
Any help would be much appreciated.
Regards,
HC.

Bob, you're not going to believe this but I must confess. As I was online with support, he had me try to reinstall 5.5 so I could tell him the exact error message I was getting. Well, I suddenly realized that there were more options as to which software I was trying to upgrade and that I had chosen the wrong one. Once I put in the correct software selection it installed. Now, however, there are several error messages that came up at the end of the installation. So I have to deal with that now. I briefly ran Premiere just to see if it would work and it did but I am sure there are functions that will not work until fixed. What next. The good news is that the serial number problem is over, my bad.
Thank you for your interest, Ted

Problem with Express Connection Utility, acces provider DLL

Similar Messages

Maybe you are looking for