Problem with Extension Manager - NEWEST CC VERSION

Hello to all. Today I installed the latest version of Adobe CC - including Dreamweaver and Photoshop and the Extension manager - (August 29, 2014). When I try to install my Dreamweaver extensions (ExtendStudio)... I get the following message (image below) - Extend Studio says that I don't have the latest version of the Extension Manager but I just installed it from the cloud... (version - second image below - that is the latest version right?)... please help. Thanks

Thnaks
I've done it .... and it works
I can now use the "dashboard" extension from Kubota
I'm not familiar with this process, so another question : as it seems there
is also an Extension Manager for CS5.5, should I
- Download it and install (in this case would my ormer extension still work
- "Update PhotoShop to CS5.5 (but it says I have the latest updaytes) and
Extension Manager to CS5.5
Thanks again Have a good day

Similar Messages

DW CS4 with Windows 7 - problems with Extension Manager

Hi
I am new to this forum and have searched to see if anybody else has had this issue but can't find it.
I have recently installed CS4 on a Windows 7 laptop. I had originally downloaded and installed it on an XP laptop where it was all fine.
I had some problems with installation with the unlocking of the serial number on the new laptop - this was resolved by Adobe support.
However now I am trying to install extensions and get the message that the Extension Manager is unavailable and I have to re-install.
I have tried to contact Adobe using the Support portal but my post has been there for 4 days and I have had no response. I have just tried to call and after 12 minutes of being on hold - when the wait time was supposed to be 1 minute - I gave up.
Can anyone help with this. Does this mean an uninstall then re-install again? In which case I will have the same serial number issue that I had before. Or is there any other way I can install the Extension Manager?
Would really appreciate any help.

I had a somewhat similar experience with the 4.2.1 upgrade with my computer. With my Q6600 running at 3.2 GHz, Vista x64 and with PPro CS4/4.1 update, I ran the PPBM4 benchmark and scored an 83.8. I then installed Win 7 x64, clean install etc… and re-ran the PPBM4 benchmark, with the same 4.1 update and with all system configurations the same as before, my score improved to 68.8, fantastic! I was very impressed with Win 7 x64.
This was short-lived because I updated PPro from 4.1 to 4.2.1, re-ran the PPBM4 benchmark and my score fell to 83.1 seconds, not impressed with the 4.2.1 update as far as this benchmark was concerned. I replaced the Q6600 with a Q9450, also over clocked to 3.2 GHz and with Win 7 x64, ran the PPBM4 benchmark and scored a 68.1; I got back everything I had lost in system speed from the 4.2.1 update plus some.
The Q6600 does not have the SSE4 instruction set while the Q9450 does. Perhaps the 4.2.1 update benefited CPU’s with SSE4 while those CPU’s without it, took a performance hit, just a guess.

Problem with Extension Manager 5.5

I updated Extension Manager to what I think is the last versionWhen i try to install Dashboard extension from Kubota, I get a message telling that my version of Photoshop should be between 12.0 and 13.0.1My current vesrion of Photoshop is
Version Adobe Photoshop : 12.0.4 (12.0.4x20110407 x64Furthermore, when the panel for Extension Manager is displayed, no product is listed (even Photoshop) !Any idea ? Thanks

Thnaks
I've done it .... and it works
I can now use the "dashboard" extension from Kubota
I'm not familiar with this process, so another question : as it seems there
is also an Extension Manager for CS5.5, should I
- Download it and install (in this case would my ormer extension still work
- "Update PhotoShop to CS5.5 (but it says I have the latest updaytes) and
Extension Manager to CS5.5
Thanks again Have a good day

Trying to load server behaviour but problem with extension manager

I keep downloading the server behaviour extension from exchange which tells me that I need the latest version of the the extension manager. I have the latest version of extension downloaded through the cloud. But when I go to windows - manage extensions , it goes to the cloud panel and shows me that extension manager is up to date, and not ot the extension manager. So now I can't access server behaviours which is the reason I use DW in the first place. I have windows 7 , 4gb ram, DW CC.

Please click "Tools"->"Preferences" menu item in Extension Manager CC, check "Enable detailed logging" option. Restart Extension Manager. Try to install the extension. After the error message pops up, quit Extension Manager. Send the log files under "C:\Users\<YourUserName>\AppData\Roaming\Adobe\Extension Manager CC\Log" folder to [email protected]
Note that the "C:\Users\<YourUserName>\AppData" folder is hidden by default. You have to check "Organize"->"Folder and search options"->"View"->"Show hidden files, folders, and drives".

Invalid Signiture problem with Extension Manager

When I try to load an extension to Dreamweaver CC I get an error saying the extension does not have a valid signiture. I have tried a number of extensions with the same result.
Can anyone tell me what I am doing wrong please.
Thanks
Brian

Please click "Tools"->"Preferences" menu item in Extension Manager CC, check "Enable detailed logging" option. Restart Extension Manager. Try to install the extension. After the error message pops up, quit Extension Manager. Send the log files under "C:\Users\<YourUserName>\AppData\Roaming\Adobe\Extension Manager CC\Log" folder to [email protected]
Note that the "C:\Users\<YourUserName>\AppData" folder is hidden by default. You have to check "Organize"->"Folder and search options"->"View"->"Show hidden files, folders, and drives".

Problem with Extension Manager in DW 8

In DW 8, when I click Command, the Extension Manager is
grayed-out even when I'm logged in as an Administrator. I can
install entensions by double-clicking them but they are not
available in the program thereafter and the Extension Manager is
still grayed-out.
Is there a fix for this?

Reinstall the Extension Manager.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"quintalr" <[email protected]> wrote in
message
news:ela1i6$4g1$[email protected]..
> In DW 8, when I click Command, the Extension Manager is
grayed-out even
> when
> I'm logged in as an Administrator. I can install
entensions by
> double-clicking
> them but they are not available in the program
thereafter and the
> Extension
> Manager is still grayed-out.
>
> Is there a fix for this?
>

Logon problem with oracle management server

I have problem with Oracle Management Server when I connect to the OMS message comes
The exception (java.lang.NullPointerException) occurred.
if any body have any idea pls tell us

Hi,
Oracle has changed the Enterprise Manager from version 1.5 to 2.0 .
With the new Oracle8i dataase server another service has been added.
If you want to user the OEM you have to install The Managment Server.
The Managment server has its own user and privileges and is recommended when using OEM.

10.1.3 problem with extensions.

C:\jdev\1013p\jdev\lib\ext\bc4j_junit_addin.jar!\meta-inf\jdev-ext.xml
I have general problem with extensions in the new developer preview.
At start up time, they all give error messages like this.
Error: <Line 3, Column 21>: XML-24534: (Error) Element 'feature' not expected.
Error: <Line 22, Column 14>: XML-24521: (Error) Element not completed: 'extensions'
C:\jdev\1013p\jdev\lib\ext\junit_addin.jar!\meta-inf\jdev-ext.xml
Error: <Line 3, Column 21>: XML-24534: (Error) Element 'feature' not expected.
Error: <Line 66, Column 14>: XML-24521: (Error) Element not completed: 'extensions'
JDeveloper starts OK, but the extensions don't work properly. JUnit appears in the New... menu, but doesn't display any sub-items. Jalopy (the newest one) appears in the preferences page, but causes the code editor context menu not to display.
I've run jdev.exe but there are no additional messages in the console window.
Windows XP SP2 Pentum M, 1GB RAM

Hi Jim,
Are you dropping 9.0.5 extensions into 10.1.3? You need to get 10.1.3 compatible extensions. Also, there are now two separate locations for extensions:
${jdev.home}/jdev/lib/ext : for "backward compatible" jdeveloper extensions (extensions from 9.0.5 and prior will probably work if dropped here, but may be affected by API changes... usually those extensions will need to be recompiled against the 10.1.3 extension API)
${jdev.home}/jdev/extensions : for new JSR-198 compliant extensions.
For JUnit, it's best to either install using Help->Check for Updates..., or download the 10.1.3 zip files manually and extract them into ${jdev.home}/jdev/extensions. The bc4j junit extension will not work in the 10.1.3 preview, because there is no ADF.
Thanks,
Brian

How come that I can't install muse-add-on with extension manager?

I downloaded an add-on for adobe muse. I could not add it via library panel. In creative cloud I tried to mark 'sync files' on, but for some reason that I don't understand it jumps allways back to 'sync files off'. So I tried to add the add-on with extension manager. Here I get the message: see screenshot. I wonder also why adobe muse is not in the product list of extension manager?
thanks for help

1. Extension Manager doesn't support Muse.
2. If the add-on file you downloaded is a ZXP file, you have to use the latest version of Extension Manager CC.

Cant install any extension for Dreamweaver with Extension Manager

I have installed dreamweaver cs6 but when i tried to install extension it says "This extension can not be installed, it requires Dreamweaver version 13 or greater.

You can only install extensions for DW CS5 with Extension Manager CS5. But this extension has declared it only supports CC or higher. So you can’t install it for DW CS5.

Problems with the iOS 5.1 version, HELP!

I just upgraded to the latest version - iOS 5.1 on my iPhone 4, but now the screen is freezing all the time, and the phone shuts down. Is this a problem with the new 5.1 version? What can I do to fix it?

Try to restore it... I'm hating this iOS 5.1, everything was working much better before it was released. I shouldn't have upgraded...

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

Problem with discovering Managed Servers

Hi,
I got problem with discovering managed servers, when I restart only administration
server while managed servers are running. During restart of admin server everything
seems to be ok (the directive: Starting discovery of managed server... appears
on the screen).
However when I start admin console through http, I cannot monitor performance,
browse logs etc. I can only shutdown managed server and I can see in a server
tag that particular managed servers are running.
I'm looking forward for any clues
Michal

Sorry,
i cannot stop those managed server - in Control tab I have active only option
to start those server but they are running. In logging tab when I want to browse
the log the message that probably this server is not running appear. However in
the tab when all servers are listened there is a message that they are running
"Michal" <[email protected]> wrote:
>
Hi,
I got problem with discovering managed servers, when I restart only administration
server while managed servers are running. During restart of admin server
everything
seems to be ok (the directive: Starting discovery of managed server...
appears
on the screen).
However when I start admin console through http, I cannot monitor performance,
browse logs etc. I can only shutdown managed server and I can see in
a server
tag that particular managed servers are running.
I'm looking forward for any clues
Michal

Problem with desktop manager/phone.

when i connect my blackberry curve 9360 to desktop manager, my phone screen has a picture with the phone and computer pointing each other with the arrows to show it is connected/connecting. when i start to back up my phone, these arrows go away. my phone is just 6 months old and works perfectly fine.

Try these steps:
1. Uninstall Blackberry Desktop with Media Manager
2. Restart computer
3. Install Blackberry Desktop with Media Manager
If your version won't work you may try different versions of "Blackbery Desktop With Media Manager".
You may download these versions here
if your issue solved set "Solution" mark at the relevant post

I have a problem with session manager session files because of the invalid json storage data submited by firefox

Hi, i have problem with session manager's session files. The problem is: the submitted storage data from firefox which is put between "storage":{ and its matching closing brace } But in some of my session files there is non equal { and } under storage's braces. I need to get storage data but in my case it is very hard to do. My question is there any char put before or after { and } like /{ or \{ to avoid confusion? If there is not such thing, i think there could be different solution but i am not sure: i look couple of my session files; after "storage":{...} there is ,_"formDataSaved" so i can get storage data in this example ... by looking between "storage":{ and ,"_formDataSaved" easily. Is there every time ,"_formDataSaved" after "storage":{ ? Thank you.

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

Problem with Extension Manager - NEWEST CC VERSION

Similar Messages

Maybe you are looking for