Problem with External 2.1 digital speakers

Anybody have any problems with external digital speakers connected to the SPDIF connection? I have a 1215-600XT, and I tried connecting my old DELL Boston Acoustic 2.1 speakers. They worked, but any time a "sound" played, a loud pop would follow the end of the sound track. If its multiuple sounds (i.e. an application that is making numerous alert sounds) I get multiple pops. It even happens at the endf of music tracks. It was so annoying, I stopped using the speakers. before I invest in another set of speakers, want to know I am not wasting my time.
Also, anyway of getting the soundcard to support digital 2.1 or other sound? The set-up screen only shows stereo for external speakers and no way of adding more.
Sincerely
Scott

pmoney,
If you need a RMA, you will need to contact Customer Support either via email or phone. Also, it may be a fault with the sub and not just the cable alone, anyway contact Customer Support and they will be able to assist further.
Jason

Similar Messages

Problems with external context mapping

Hi ,
I am having the following problems with external context mapping from one WD component to another.
Problem description:
In the <i>Component Interfaces</i> I have defined a WD interface "InfA".
In the <i>interface controller</i> of this compoenent,I have ContextA and attributeA(cardinality 1..1).The contextA is marked as an "Input Element".
Now my webdynpro componentB adds InfA as used component.In componentB I decalre a contextB with attributeB and map it to contextA to set up the external context mapping.
Now I expect that if any webdynpro component implements this WD interface InfA ,he has access to contextA with the data getting filled from contextB.
After i have created the component for the used component I try to fill values in the source node contextB thru this code:
wdContext.currentContextB.setB(value);
But in the runtime I keep getting error nullPointerException for nodeContextB,suggesting that the mapping has not been completed.
Can anyone suggest due to what the error can come ,and, if its a webdynpro bug ,is there a workaround??
Thanks in advance for your help.
Best regards
Sourav

HI,
Valery : I personally checked by doing the example, if the names of value attribute are different in the child's interface and parents component controller then it throws the exception.
Sourav: NullPointer Exception is thrown when something is not properly initialised, if in the main component the cardinality of mapped origin is 1.1 then you need to access it element directly like:
wdContext.currentParentNodeElement().setFname("Abhijeet");
wdContext.currentParentNodeElement().setLname("M");
i will suggest just check out if you are declaring some element of value node and without initialising taking its use or what?
if this doesnt solve your problem, please post the expanded exception.
hope it helps
let me know if you face nay problem
regards

Problem with external punchout in SRM Server 713

Hello,
We upgrade from SRM_SERVER 701 SP 04 to SRM_SERVER 713 SP 02, now we have a problem with external catalog, we did not change anything in standard call structure, however now when the user access to external catalog, select a product and "checkout", SRM returns to shopping cart screen without products and no message are register in log in transaction code SLG1.
Our parameters in structure are:
10                     https://xxxxxxxxx                          URL
20 VIEW_ID          NAME                            Fixed value
30 VIEW_PASSWD     XXXXXX               Fixed value
40 USER_ID          SY-UNAME                   SAP field
50 BRANDING      search5                     Fixed value
60 LANGUAGE      ES                           Fixed value
70 COUNTRY      MX                             Fixed value
75 EASYORDER 1                          Fixed value
80 target _top                                  Fixed value
85 ~caller      CTLG                              Fixed value
90 OCI_VERSION     4.0                     Fixed value
91 FILTER                                      Fixed value
92 OPI_VERSION 1.0                     Fixed value
100 HOOK_URL                             return URL
110 returntarget      _top                       Fixed value
we made some test with parameter BYPASS_INB_HANDLER, set as 'X' but this not solve our issue.
We have an implementation in badi BBP_CATALOG_TRANSFER to map product category, even if I set an external breakpoint in this implementation, system does not pass through it, also we test with this implementation inactive and behavior is the same, nothing transfer to shopping cart
Does anyone know what's missing?
Thanks in advance.
Best regards,
José Luis D.

Hello Jason,
Thank you for your answer, but as I told, If I set an external breakpoint it does not stop for debugging, so I can't see table as you recomended. This process (debugging) is familiar to me, in last version I can do it.
Any suggestion?
Thanks in advance, best regards
José Luis D

I have a problem with external editing preferences where Photoshop will not launch when I choose "Edit In"...

Hi. I have a problem with external editing preferences. If I add Photoshop as an external editor, it won't launch when selected, if I add it as an additional external editor it will. Why? How can I fix this as I need to use Photoshop and another program as the additional external editor.
I use a Mac running OS X (10.8.5) and PS CS4 and LR 5.7. Any ideas on a fix? Thanks in advance.

I don't know why Photoshop won't start. However, it's possible to create external editor presets using the additional external editor tools. There are instructions on how to do this in the Lightroom help. You could assign Photoshop and create one preset, and then assign another program and create another preset.
I don't know if deleting your preferences would fix the problem or not. It can sometimes fix other problems.
Preference and other file locations in Lightroom 5

I am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation

i am having Problems with using my adobe digital Reader ,it gives me the error E_ADEPT_IO Activation,what can i do to activate

This is the Adobe Reader forum. If you are talking about Digital Editions, the right forum is here:
http://forums.adobe.com/community/adobe_digital_editions

Configuration problem with external Western Digital My Book 2 TB drive

How do I fix a configuration problem with my external Western Digital My Book 2 TB drive which used to both read and write. Something has happened so that the drive is now read only? There is 600 GB of data on the drive that I cannot lose, thus am very concerned about messing around with formatting the drive which is raid 1 and filled with data.

may not like to hear, but I'd skip on MyBook cases, nice looking as they are.
Get a 2nd drive case to recover to.
http://www.macsales.com/firewire
may need to play with the demo Data Rescue 3 from Prosoft
Backup/recover before repair is usually in order
never have one backup set. THREE sets of your data, minimum.
3rd party disk maintenance and repair should be a must and given rather than rely solely on Apple Disk Utility.
Data and system maintenance and recovery plan - should be like practice for sports, arts, military with practice and making sure you will know how and the tools you need - ahead of time
Resetting USB/FW ports, try another if one won't work. When 10.6 came out there was a lot of grinding teeth with external drives not working or mounting.

Error code 36 (problems with external hard drive)

I have just upgraded to Yosemite and am now having major problem with my external western digital hard drive. I cannot create new folders and when I hit command N I get error code 36. I also cannot move files from one folder to the next. When I try to move them I get the error message: "The operation cannot be completed because a file of that name already exists" and that simply isn't true. None of the files' names exist in the other folder.

Ok, It appears to be the fault of Western Digital. I ejected the hard drive and then plugged it back in and it said that the drive was broken but I could still read the files and it told me to save the files on another disk and reformat. So it was just a coincidence that I upgraded to Yosemite at the same time that my external hard drive broke.

Problems with External Monitor In XP

Ok, I've got a huge problem with XP on Bootcamp.
I've recently got a Samsung TV which I can use as an external monitor. This works absolutely fine when I'm using OSX, recognizes the TV and can use it as a second screen.
When I try to use the same monitor in Windows under Bootcamp, it works as an extension of my desktop, but not able to mirror my desktop. I want to do this so I can play my games on a large screen instead of a small one.
I've trawled the forums on this kind of problem and found a few answers. However, many of them talk about the ATI graphics drivers. I've downloaded the appropriate drivers and the control center from the website, but to no avail.
People have also said about going into display properties: settings: advanced and selecting the ATI tab. I have no ATI tab.
Also with the Catalyst Control Center, when I try to run it, it tells me that I dont have permission to change the settings and to contact my administrator, even though I am the administrator.
Does anyone have any ideas how I can solve this?
By the way. I'm connecting the external monitor via the DVI on my Macbook Pro to the HDMI connection on the TV.
Many thanks
Chris

My logic tells me, if you are using a new MBP the way it's designed is that even if you are plugged in at times it will go in battery mode for a few minutes in order to prevent battery damage, than it will recharge. This happens in the background without notice. However, within this couple of minutes you might notice your display screen to sleep because it is setup to sleep in 1 minute or less in the preference under battery mode. So within that window you might have your screen go blank since the entire process takes a lot more than a minute. I hope this helps.

Inkscape/X11 Problems with external Monitor

Hello,
I´m using Inkscape to create vector art on my MacBook Pro.
Since my update to Mavericks I´m having problems with X11. I have the version 2.7.5 of XQuartz installed currently.
After some troubles, Inkscape opens up just fine.
But I cannot drag Inkscape over to my external monitor, which is based to the right of my notebook.
Inkscape simply disappears.
I´m quite the DAU ;-) with Computers and Software, so it would be nice, if you can help me.
Thanks a lot in advance!
Best,
Sonja

How about trying a native Mac app like iDraw http://www.indeeo.com/idraw/

Permissions problem with external HD

Prior to updating to 10.4.3, I was able to write to any external HD to transfer large files betweek my iBook and a windows PC. After upgrading, I am no long able to use 3 out of the 4 external HDs that I used to be able to. I always get an error message stating a problem with permissions. I get info on the drive and it says read only and will not allow me to change to read and write. I plug the same drive into my Windows PC and change the permissions to read and write, and get the same message when I go back to my iBook, I get the same read only problem.
Any ideas?

Eric,
I, too, apologize for the delay in posting. I have been away from the discussions for a rather extended period.
Well, any NTFS formatted volume will only be accessible to you as read only. No, this is not something new, but has always been the case. To make matters worse, I have heard that Windows no longer provides any way to create a FAT-32 volume; one must use OS X to format the volume or use a third-party application in Windows. This information may be incorrect, but I wouldn't be surprised if it is true (we're talking about Microsoft, here).
If you can copy any data on this drive to some other location, then use Disk Utility to format it as FAT-32, the data can then be copied back and it can be used to transport the data cross-platform, with read/write access on both ends. Is this a possibility for you?
Scott

Problem with external Lacie disk

Hi!
I have some serious problems with my Lacie 250GB Porche disk.
The disk shows up on my desktop but it does not allow me to read and write to it. Apple's disk tool does not manage to fix the disk. I have tried running Diskwarrior, but it gives me an error saying that the disk could not be rebuilt due to a disk malfunction. I am now using Techtool Pro 4.0.4. I have not used Techtool before, only DW. Im running a process called "Recover Files Using Directory Data"...is this the one I should be using? The manual was'nt all that clear about this...Please please help me as I have 44GB of client projects on this disk.
Thanks in advance,
Tom - Norway

Hi Richard!
Thanks for your response!
I have now bought Data Rescue II from ProSoft:
http://www.prosofteng.com/products/datarescueinfo.php
It seems that the problem is my external harddrive and not the machine. I get read errors when I try to open projects in Photoshop / Indesign etc.
There are of course companies that can retrieve my data, but thats like my last solution cause they cost loads of money
Hoping that Data Rescue can clone my data to this new hd. The process seems to be taking days... 165.2 hours left and it has been working for two days now
Tom - Norway

RMDATIND uploading problem with external material numbers

Hi,
I'm using LSMW direct input program RMDATIND (Object:0020 Method:0000) for creating materials.
I have a problem with uploading materials which have two types of external material numbers.
For example one material number is 1111-333 and then we have 10000000. The problem is that direct input won't create materials with number 1111-333 though it's possible to create them manually. It works fine with material 10000000.
Does anyone know how fix this issue?

Sweth123 wrote:
Hi Guys:
>
> Clicked check box External number assignment without Check., When I am creating a material (mm01) with only numeric characters it is giving me an eror message saying for this material type Numeric characters are not allowed.
>
> i should be able to create a material with external number range and it can be numeric or alpha numeric?
>
>
> Thanks
> Sweth
Hi,
go to the path Define Number Ranges for Each Material Type click on maintain groups & select the materila type & select the mouse on material type & click on maintain after that maintain the number ranges.
for ex: from 300000000 to 399999999 internal no.range
from A to ZZZZZZ external no.range
from this u can able to create a material with external number range and it can be numeric or alpha numeric
Regards
Raj.

Having problems with External Hard Drives on my Laptop

Ever since using linux i've always had the same problem. Whenever i connect a hard-drive, it keeps disconnecting/ spitting input-ouptut errors.
I thought it was because of the hard-drive failing, which turned out to be the problem with my last two, but i'm using another one (Seagate MomentusXT 500GB) and i'm getting the same problem.
I had just reformatted this hard drive from NTFS to Ext4 using Gparted, so maybe that's the problem? I'm really kind of lost.
I mount my HDD like this:
sudo mount /dev/sdd1 /mnt/usb
and unmount like this:
sudo umount /mnt/usb
It connects initially, and i'm able to put stuff onto it. I was able to put a whole TV series on it successfully, but when i tried copying my music onto it it failed and alot of the music didn't copy, giving me these errors:
ile system
cp: cannot create directory ‘/mnt/usb/music/Clawfinger’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Cake’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/The Glitch Mob - Discography’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Bastille - Bad Blood (The Extended Cut)’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/ARCTIC MONKEYS - DISCOGRAPHY (2005-13) [CHANNEL NEO]’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/NIRVANA DISCOGRAPHY @320Kbps CbR Mp3 [TuGAZx]’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/The Doors - STUDIO DISCOGRAPHY’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Tiesto - Red Lights (2014.Dance)’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Tiesto - A Town Called Paradise (Deluxe Edition) 2014 320kbps CBR MP3 [VX]’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Daft Punk - Discography - 1994-2013’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Pink_Floyd_Greatest_Hits’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Calvin Harris - Discography - 2007-2013’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Weezer [Discography]’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/MGMT’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Blackmill’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Avicii - Discography’: Read-only file system
cp: cannot create directory ‘/mnt/usb/music/Zedd’: Read-only file system
cp: preserving times for ‘/mnt/usb/music’: Read-only file system
I can then unmount and mount the HDD again, and try again, but i keep getting the same problem.
Here's my dmesg:
[22951.444217] usb 1-1: reset high-speed USB device number 19 using xhci_hcd
[22966.616452] usb 1-1: device descriptor read/64, error -110
[22981.892003] usb 1-1: device descriptor read/64, error -110
[22982.155518] usb 1-1: reset high-speed USB device number 19 using xhci_hcd
[22997.327767] usb 1-1: device descriptor read/64, error -110
[23012.603571] usb 1-1: device descriptor read/64, error -110
[23012.867002] usb 1-1: reset high-speed USB device number 19 using xhci_hcd
[23017.881048] xhci_hcd 0000:00:14.0: Command completion event does not match command
[23017.881078] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23023.098593] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23023.302055] usb 1-1: device not accepting address 19, error -62
[23023.462289] usb 1-1: reset high-speed USB device number 19 using xhci_hcd
[23028.476297] xhci_hcd 0000:00:14.0: Command completion event does not match command
[23028.476314] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23033.693797] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23033.897336] usb 1-1: device not accepting address 19, error -62
[23033.897435] usb 1-1: USB disconnect, device number 19
[23033.903973] sd 10:0:0:0: [sdd] UNKNOWN Result: hostbyte=0x01 driverbyte=0x00
[23033.903976] sd 10:0:0:0: [sdd] CDB:
[23033.903977] cdb[0]=0x2a: 2a 00 03 90 e5 10 00 00 f0 00
[23033.903982] blk_update_request: I/O error, dev sdd, sector 59827472
[23033.903985] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478464)
[23033.903987] buffer_io_error: 4990 callbacks suppressed
[23033.903988] Buffer I/O error on device sdd1, logical block 7478178
[23033.903990] Buffer I/O error on device sdd1, logical block 7478179
[23033.903991] Buffer I/O error on device sdd1, logical block 7478180
[23033.903992] Buffer I/O error on device sdd1, logical block 7478181
[23033.903993] Buffer I/O error on device sdd1, logical block 7478182
[23033.903994] Buffer I/O error on device sdd1, logical block 7478183
[23033.903995] Buffer I/O error on device sdd1, logical block 7478184
[23033.903996] Buffer I/O error on device sdd1, logical block 7478185
[23033.903997] Buffer I/O error on device sdd1, logical block 7478186
[23033.903998] Buffer I/O error on device sdd1, logical block 7478187
[23033.904015] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478524)
[23033.904027] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478554)
[23033.904050] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478584)
[23033.904066] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478614)
[23033.904080] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478644)
[23033.904095] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478674)
[23033.904110] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478704)
[23033.904124] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478734)
[23033.904139] EXT4-fs warning (device sdd1): ext4_end_bio:317: I/O error -5 writing to inode 16777759 (offset 0 size 8388608 starting block 7478764)
[23033.905630] sd 10:0:0:0: [sdd] UNKNOWN Result: hostbyte=0x01 driverbyte=0x00
[23033.905632] sd 10:0:0:0: [sdd] CDB:
[23033.905633] cdb[0]=0x2a: 2a 00 03 90 e6 00 00 00 f0 00
[23033.905639] blk_update_request: I/O error, dev sdd, sector 59827712
[23033.906165] Aborting journal on device sdd1-8.
[23033.906176] JBD2: Error -5 detected when updating journal superblock for sdd1-8.
[23033.906270] EXT4-fs (sdd1): Delayed block allocation failed for inode 16777761 at logical offset 0 with max blocks 2048 with error 30
[23033.906272] EXT4-fs (sdd1): This should not happen!! Data will be lost
[23033.906276] EXT4-fs error (device sdd1) in ext4_writepages:2395: Journal has aborted
[23033.906793] EXT4-fs (sdd1): previous I/O error to superblock detected
[23033.906801] EXT4-fs error (device sdd1): ext4_journal_check_start:56: Detected aborted journal
[23033.906802] EXT4-fs (sdd1): Remounting filesystem read-only
[23033.906803] EXT4-fs (sdd1): previous I/O error to superblock detected
[23033.906808] EXT4-fs (sdd1): ext4_writepages: jbd2_start: 9223372036854775807 pages, ino 16777762; err -30
[23033.907641] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907644] EXT4-fs (sdd1): previous I/O error to superblock detected
[23033.907690] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907692] EXT4-fs (sdd1): previous I/O error to superblock detected
[23033.907736] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907738] EXT4-fs (sdd1): previous I/O error to superblock detected
[23033.907771] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907773] EXT4-fs (sdd1): previous I/O error to superblock detected
[23033.907805] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907845] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907886] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907919] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23033.907947] EXT4-fs error (device sdd1): ext4_find_entry:1289: inode #16515073: comm cp: reading directory lblock 0
[23034.490498] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880225074480
[23034.490502] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802250744c8
[23220.391199] usb 1-1: new high-speed USB device number 54 using xhci_hcd
[23235.563509] usb 1-1: device descriptor read/64, error -110
[23250.839126] usb 1-1: device descriptor read/64, error -110
[23251.102653] usb 1-1: new high-speed USB device number 55 using xhci_hcd
[23266.274917] usb 1-1: device descriptor read/64, error -110
[23281.550616] usb 1-1: device descriptor read/64, error -110
[23281.814174] usb 1-1: new high-speed USB device number 56 using xhci_hcd
[23286.831502] xhci_hcd 0000:00:14.0: Command completion event does not match command
[23286.831579] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23292.049048] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23292.252556] usb 1-1: device not accepting address 56, error -62
[23292.412732] usb 1-1: new high-speed USB device number 57 using xhci_hcd
[23297.426714] xhci_hcd 0000:00:14.0: Command completion event does not match command
[23297.426728] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23302.644273] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[23302.847753] usb 1-1: device not accepting address 57, error -62
[23302.847781] usb usb1-port1: unable to enumerate USB device
Anyone know how to fix this?

There is a whole lot of bad going on there.
There are problems both drive errors and USB errors. I don't believe it.
I have a hunch the drive is starving for power.
USB devices are supposed to function all the way down to 4.25V. Not all do.
USB ports are supposed to be able to deliver 4.25V at the end of the cable at 500mA. Not all do.
USB 2.0 devices are not supposed to draw more than 100mA unless they negotiate for more. Some violate that.
USB 2.0 devices are never supposed to draw more than 500mA. Some violate that. Especially disk drives.
My guess is that your drive is drawing excess current and the voltage drop through the port and cable are dropping you below 4.25; or at least below the voltage that your drive goes "Tango Uniform"[1]. Does your drive have the option for external power? If so try it. Following up on wtx's comment; USB 3.0 is capable of delivering more power. Also, some drives have used a cable that violates just about every aspect of the USB specification: A "Y" cable that plugs into two host ports to provide more power to the guest. I despise this solution with every fiber of my electrical engineering existence; never-the-less, you might try one.
edit: [1] Teats Up.
Last edited by ewaller (2015-04-04 17:02:04)

Post-Install Problem with External Firewire drive

I just installed Tiger 10.4.3 and the computer would not reboot. It would stop prior to the Starting Mac OS X progress bar and gray out letting me know that the computer needs to restart.
I finally got it to boot successfully by unplugging or turning orr my external Maxtor Firewire drive. The external drive was plugged during the install process (mistake?)
Via Software upgrade, I upgraded to 10.4.6 in the hopes that this would solve the issue. No luck and when turning the drive on, it immediately goes right to the gray screen and lets me know it will need to reboot.
Is this a known problem with a known solution? Did I FUBAR my drive somehow? Any suggestions for righting to ship?
Thanks!
Rob P

OK, last one before dinner. I found the panic log. here is what it says:
Description: Panic (system crashes) log
Size: 12.39 KB
Last Modified: 5/25/06 6:39 PM
Location: /Library/Logs/panic.log
Recent Contents: ...
panic(cpu 0): 0x400 - Inst access
Latest stack backtrace for cpu 0:
Backtrace:
0x000857F4 0x00085C24 0x000287B4 0x0008F6A8 0x000927B8
Proceeding back via exception chain:
Exception state (sv=0x24051780)
PC=0x00000020; MSR=0x40009030; DAR=0x11F23B98; DSISR=0x40000000; LR=0x16FE0DEC; R1=0x1227BB90; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x16FE0C58 0x16FE08DC 0x16FE043C 0x0021FFAC 0x0021FDA8 0x002206F8 0x00220D54 0x002111D0
0x00211194
Kernel loadable modules in backtrace (with dependencies):
com.maxtor.iokit.IOFireWireMxBt(2.0d1)@0x16fdf000
dependency: com.apple.iokit.IOFireWireFamily(1.4.0)@0x233d3000
Exception state (sv=0x22F58A00)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 6.8:
Wed Sep 10 15:20:55 PDT 2003; root:xnu/xnu-344.49.obj~2/RELEASE_PPC
Does this help anyone???
Rob P

Problem with Aperture 2 and Digital Camera Raw Compatability update 3.1

Has anyone using Aperture 2 experienced problems with the Digital Camera Raw Compatability update 3.1. It may be purely coincidence but, since downloading this on March 3, I get the dreaded red screen and unsupported image format on my previously downloaded and edited RAW photos. I use a Pentax k-7 with which, once set up, I have had no problems until now!
Please - any help would be very gratefully received

That probably explains why any checks that your computer did to see if the Camera Raw update was okay to apply didn't stop it. You should probably contact Apple and explain that they broke something that was working fine previously.
A few people have reported backing off Camera Raw 3.1 and going back to Camera Raw 3.0 for now. This note is one of the ones I've found describing how to do that, if you wish to try that. Or, you could head down the path Apple means to lead you on and upgrade to Aperture 3.
Message was edited by: Ailish Eklof

Problem with External 2.1 digital speakers

Similar Messages

Maybe you are looking for