Problem with external hd on new Imac 21,5'

I plug my external hard disk, but Imac doesn't mount it!
I can see it from Utility disk, but I can't activate...
I've tried different port, restart, but it's the same.
The hd is a 500 Gb Western Digital (My passport) formatted NTFS.
I've installed macfuse and paragon ntfs, but the problem is still there.
I've also create another account with administrator permission, but nothing change!
The hd work with no problems on windows and on others imac with paragon or ntfs.

just got a brand new iMac
If you are still within your 15 day return period.  Call Apple they will sent out iDVD at no charge.  (There are no realistic substitutes.)
You MUST speak to a senior advisor to get a free copy. The first tier people cannot do it.
408-996-1010
800-692-7753
If that doesn't work you can purchase iLife 11  (includes iDVD) on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
http://dealmac.com/lw/artclick.html?1,527850,1872219

Similar Messages

  • Problem with Setup Assistant and New iMac

    I just purchased a new imac intel (actually 2010 model from MacMall on closeout) and I want to transfer my files over from my old imac - 2004 G5 running 10.5.8
    During the initial start up of the new imac I choose the option to transfer my information from another mac (using setup assistant). 
    I connect using firewire and start up the old mac in firewire mode (holding down T).  After the new mac calculates the files to tranfer I cannot chose the continue button - the button is greyed out.  In addition the remaining space available shows a negative (red number).   This also occurs if I choose to transfer from a time machine back up on an external drive.   Help.

    You didn't mention what version of OS X is on the new system. I would strongly recommend starting over and using Pondini's
    Lion Setup Assistant tips
    or
    Snow Leopard Setup Assistant tips
    depending on what the new system has loaded on it. If you have been using Time Machine or a bootable clone backup for the old system you can restore from that backup rather than having to mess with Target Disk mode.
    If you still have difficulty call AppleCare, they're there to help on this type of issue. The number is in the owners manual.

  • Major Problem with kernel panic on new iMac: HELP!

    My housemates 24" core 2 duo imac kernel panicked when playing Call of duty 2 (side question: if anyone has any reason why it keeps freezing and the screen getting full of horizontal lines would love to hear from you)
    Now I can not start the computer. Whenever I restart, it plays the chime, but then has another kernel panic. Spoke to apple.. i reset the pram.. and then it came back.. ive zero data deleted my hardrive then re-installed osx.. and it is still doing it!! (i ran hardware tests and said everything was working fine..)
    The graphics card is nvidia 7600GT
    Also.. When starting up the imac, just after the apple logo white screen turns to the desktop, the screen flashes a lime green for a split second.. i know that shouldnt happen!
    It wont let me send a report to apple wen i get a window saying "imac shut down unexpectantly".. when the button clicks.. no report comes up.
    The operating is a 24" 2.16 Ghz iMac intel 2 core duo, 1GB RAM!
    Any help or advice would be very much appreciated.
    Cheers.

    I had the same problems. New iMac 24" arrived last week (a replacement because the first one had a faulty screen and keyboard). Set it up at the weekend and it seemed fine for 48 hours until I started watching a DVD on Christmas Day. About 2 minutes into the DVD I got a kernel panic, then the computer would not restart. I left it about an hour and tried again. It started successfully, but had another kernel panic when I opened the Dashboard. Again, it failed to restart. I think that something is overheating whenever the computer tries to do any 'work' and then it crashes. I too got panics when trying to boot from the installation disc. Spoke to customer support over the phone and nothing we tried worked, so I've had to send back for another replacement system.
    iMac 24" (Intel)   Mac OS X (10.4.8)  

  • Problem with time machine software/new imac

    Hi Everyone.
    I recently bought a (non-apple) USB hard drive to use with the time machine software. I have the hard drive plugged into the back of the imac.
    Everything is working great, but whenever the imac goes to sleep, it immediately wakes back up with the "improper device removal" message. I guess when the monitor goes to sleep it kills the USB connection.
    This is annoying, because I want to leave my hard drive plugged in so that backups can happen automatically, but I also want my computer to be able to go to sleep.
    Anybody know of a way to get around this problem?
    Thanks!

    I've seen this happen under 2 circumstances: 1) the external hard drive was defective and 2) the xternal hard drive didn't have an independent power supply, it was powered by the USB port. If your drive is powered by the USB port, hook it up to a powered USB hub and that should do the trick.

  • Problems with ps elements 10 on imac

    hi,
    i just downloaded the programm yesterday from the app store onto my imac. i want to use it as an extention to my aperture 3.
    I have the following questions/problems:
    + starting the programm takes at least 2 minutes, is this normal? I use an Imac Quadcore I7 with 12 gb onboard
    + the preferences: i can only extend the used memory up to 3gb, although i have 12 gb on board?
    + I can not store the preferences, when I shut the programm down, it tells me I do not have the legitimation to store the preferences?!
    + panorama foto work is mostly running out of memory?! 12gb on board
    Please can anybody help me?
    Thanks
    mikle

    No, it does not work on the other account. Problem is still/again the same. In the new account it works perfekt.
    Von meinem iPad gesendet
    Am 08.01.2012 um 22:16 schrieb "Barbara B." <[email protected]>:
    Re: problems with ps elements 10 on imac
    created by Barbara B. in Photoshop Elements - View the full discussion
    If it works in the new account it should hopefully work in your other account, so just log out of that one and go back to the old one and see if it does.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4125222#4125222
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4125222#4125222. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problems with horizontal lines on the iMac. Someone knows the solution?

    For several months my Imac has horizontal lines have been growing. Problems with horizontal lines on the iMac. Someone knows the solution?

    You have 14 days to return the computer w/no questions asked.  Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.
    That being said, no new Mac comes w/Snow Leopard which your profile confirms you have.
    Mac OS X (10.6.8)

  • Problem with maps in Mavericks on iMac

    I have a problem with my Maps on Mavericks.
    I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
    As you can see, it just stays blank all the time.
    I'm  also running Parallels 9 and don't know if that has something to do with problem.

    Spent days trying various fixes, but this is the one that did it for me. Thanks!
    livetowin
    Re: Problem with maps in Mavericks on iMac 
    Dec 8, 2013 7:14 PM (in response to robin1943)
    Try this
    Since my date and time were incorrect and imessage was not working as well, I tried this
    1. Go to system preferences and click date and time
    2. Select date and time tab
    3. Uncheck "set date and time automatically" and manually enter the correct time
    4. Go to time zone tab and uncheck the box there too
    5. Go back to date and time tab and now check the box "set date and time automatically"
    6. Then check the box in time zone as well
    Now open maps and see if it works!

  • I have a problem with dust on the monitor (iMac 27).

    I have a problem with dust on the monitor (iMac 27). it appeared after half a year of use (in a clean room is not dusty). Replaced by a matrix of times under warranty. But after a while, again, there were shortcomings in the upper corners of the matrix. The guarantee is no longer valid. Am I entitled to free replacement of the matrix or the display?

    Re: I have a 27" iMac that has developed smudges at top left and right of the screen.  Of course it has just gone out of warranty. Anyone had a similar problem or found a solution?
    From the  More Like This  on the right

  • Problems with external context mapping

    Hi ,
    I am having the following problems with external context mapping from one WD component to another.
    Problem description:
    In the <i>Component Interfaces</i> I have defined a WD interface "InfA".
    In the <i>interface controller</i> of this compoenent,I have ContextA and attributeA(cardinality 1..1).The contextA is marked as an "Input Element".
    Now my webdynpro componentB adds InfA as used component.In componentB I decalre a contextB with attributeB and map it to contextA to set up the external context mapping.
    Now I expect that if any webdynpro component implements this WD interface InfA ,he has access to contextA with the data getting filled from contextB.
    After i have created the component for the used component I try to fill values in the source node contextB thru this code:
    wdContext.currentContextB.setB(value);
    But in the runtime I keep getting error nullPointerException for nodeContextB,suggesting that the mapping has not been completed.
    Can anyone suggest due to what the error can come ,and, if its a webdynpro bug ,is there a workaround??
    Thanks in advance for your help.
    Best regards
    Sourav

    HI,
    Valery : I personally checked  by doing the example, if the names of value attribute are different in the child's interface and parents component controller then it throws the exception.
    Sourav: NullPointer Exception is thrown when something is not properly initialised, if in the main component the cardinality of mapped origin is 1.1 then you need to access it element directly like:
    wdContext.currentParentNodeElement().setFname("Abhijeet");
        wdContext.currentParentNodeElement().setLname("M");
    i will suggest just check out if you are declaring some element of value node and without initialising taking its use or what?
    if this doesnt solve your problem, please post the expanded exception.
    hope it helps
    let me know if you face nay problem
    regards

  • Problem with external punchout in SRM Server 713

    Hello,
    We upgrade from SRM_SERVER 701 SP 04 to SRM_SERVER 713 SP 02, now we have a problem with external catalog, we did not change anything in standard call structure, however now when the user access to external catalog, select a product and "checkout", SRM returns to shopping cart screen without products and no message are register in log in transaction code SLG1.
    Our parameters in structure are:
    10                     https://xxxxxxxxx                          URL
    20 VIEW_ID          NAME                            Fixed value
    30 VIEW_PASSWD     XXXXXX               Fixed value
    40 USER_ID          SY-UNAME                   SAP field
    50 BRANDING      search5                     Fixed value
    60 LANGUAGE      ES                           Fixed value
    70 COUNTRY      MX                             Fixed value
    75 EASYORDER 1                          Fixed value
    80 target _top                                  Fixed value
    85 ~caller      CTLG                              Fixed value
    90 OCI_VERSION     4.0                     Fixed value
    91 FILTER                                      Fixed value
    92 OPI_VERSION 1.0                     Fixed value
    100 HOOK_URL                             return URL
    110 returntarget      _top                       Fixed value
    we made some test with parameter BYPASS_INB_HANDLER, set as 'X' but this not solve our issue.
    We have an implementation in badi BBP_CATALOG_TRANSFER to map product category, even if I set an external breakpoint in this implementation, system does not pass through it, also we test with this implementation inactive and behavior is the same, nothing transfer to shopping cart
    Does anyone know what's missing?
    Thanks in advance.
    Best regards,
    José Luis D.

    Hello Jason,
    Thank you for your answer, but as I told, If I set an external breakpoint it does not stop for debugging, so I can't see table as you recomended. This process (debugging) is familiar to me, in last version I can do it.
    Any suggestion?
    Thanks in advance, best regards
    José Luis D

  • I have a problem with external editing preferences where Photoshop will not launch when I choose "Edit In"...

    Hi. I have a problem with external editing preferences. If I add Photoshop as an external editor, it won't launch when selected, if I add it as an additional external editor it will. Why? How can I fix this as I need to use Photoshop and another program as the additional external editor.
    I use a Mac running OS X (10.8.5) and PS CS4 and LR 5.7. Any ideas on a fix? Thanks in advance.

    I don't know why Photoshop won't start. However, it's possible to create external editor presets using the additional external editor tools. There are instructions on how to do this in the Lightroom help. You could assign Photoshop and create one preset, and then assign another program and create another preset.
    I don't know if deleting your preferences would fix the problem or not. It can sometimes fix other problems.
    Preference and other file locations in Lightroom 5

  • We have a mac laptop and dont have any problems with pdf files but our imac will not open them.  any suggestions

    we have a mac laptop and dont have any problems with pdf files but our imac will not open them.  any suggestions?

    Back up all data.
    In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
    /Library/Internet Plug-ins
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Anyone else having problems with popups since the new security upgrade? can't get rid of them

    anyone else having problems with popups since the new security upgrade? can't get rid of them

    You may have inadvertently installed adware. You do not need to download or install anything to fix it. It ought not to be related to any Apple security update.
    For a description of how this may have occurred, how to avoid it in the future, and for Apple's recommended actions read How to install adware. Apple's instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

  • Problems with FileVault 2 on my iMac mid 2007 with Mac OS LION on it

    Hi guys !
    Get a problem with FileVault 2 on my iMac mid 2007 with MAC OS LION on it. FileVault 2 works, but after rebooting my system, it was unpossible to select an account with the cursor of my trackpad. No chance.
    Before activate Filevault 2 the trackpad works fine. No problems to select an account. Anybody else with the same problem ?
    Regards
    Volker

    Hi EVO67 !
    I checked out your solution, but.... sorry it doesn't works.
    So I cut off the bluetooth connection of the magic trackpad from my iMac and pair it again, but the problem is the same.
    May be it's bigger bug with LION, so I need an update for this function.
    But thank you very much for your help.
    Regards
    Volker

  • Problem with External 2.1 digital speakers

    Anybody have any problems with external digital speakers connected to the SPDIF connection?  I have a 1215-600XT, and I tried connecting my old DELL Boston Acoustic 2.1 speakers.  They worked, but any time a "sound" played, a loud pop would follow the end of the sound track.  If its multiuple sounds (i.e. an application that is making numerous alert sounds) I get multiple pops.  It even happens at the endf of music tracks.  It was so annoying, I stopped using the speakers.  before I invest in another set of speakers, want to know I am not wasting my time.
    Also, anyway of getting the soundcard to support digital 2.1 or other sound?  The set-up screen only shows stereo for external speakers and no way of adding more.
    Sincerely
    Scott

    pmoney,
    If you need a RMA, you will need to contact Customer Support either via email or phone. Also, it may be a fault with the sub and not just the cable alone, anyway contact Customer Support and they will be able to assist further.
    Jason

Maybe you are looking for