Problem with extract data from R/3 to BW

I want extract data from R/3 system.the problem is when I run the infopackage,I can see the status is yellow In the Monitor and the data can't extract to BW.but in the source system,the job of extracting data has been finished.
(use the Tcode: WE02)the Outbound IDocs and Inbound IDocs are OK，but in the BW system ,I canu2019t see the Inbound IDocs.
In the source system use Tcode: SM50,I can see the process SAPLQOWK is running for a long time and run out system memory.
use Tcode : SM58, I execute LUW, the data can transfer to BW system,but the report SAPLQOWK is not stop.
it would be stopped by canceling the process manually in operating system or it run out time.
why can't i extract data from R/3 system successfully ?
why the process SAPLQOWK can't finish?
how can i do?

Hi,
I hope the note 527481 would help you to sort out this problem.
Regards,
Anil Kumar Sharma .P

Similar Messages

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

Problem when extracting data from R/3 to BI

Hi Experts,
I am facing a strange problem. While i am extracting data from R/3 yo BI. One Infopackage is running successfully and i can see the data at Bi side. But while I am running another infopackage for another data source it is taking long time and at last loading results into failure.
I have gone through SDN also but not able to find any inputs.
I think it might be the reason with the Idocs. The error it is giving is
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
All of the packets from the source system arrived
I am not able to see list of Idocs in sm58.
What might be the reoson?
Regards,
sridhar

Hi,
See if its a full schedule it again by deleting any old requests....
And then when going thru job overview>in the sourcesystem>u can execute there itself and chk the status of the job...
If its no there then the job might have missed up due to some unfair reason....it happens sometimes also..some times it will be in scheduled only....once select all active/cancled/finished and so on...
And also chk under details tab...under extraction....whether data selection scheduled and requested and finished....????
If not there try to run it again and at the same moment monitor in source with jobname as BIREQU_* and select all input entries as canceled/active/finished......
rgds,

Problems to extract data from 0HR_PY_1

Hi Experts,
I'm using BW v.7 to extract data from standard data source 0HR_PY_1 of SAP-ECC, with delta update.
When I try to extract the data job finishes with error (red status) and all data-packages have error message ABORT in customer routine 9998.
Although I'm using BW v.7 I have activated 3.x extraction (DataSouce -> InfoSource -> Update Rule).
Any help will be welcome!
Alex

I've found the problem by myself

Problems in extracting data from r/3

Hi Guys
I am extracting data from r/3(QA) to BW(QA), into an ODS. Now, my previous load failed but i saw from RSMO that the load had more than 4 million records. I am scheduled the load again. And in monitor(RSMO) it says:
(yellow symbol) 17:24:50 ( 762040 From 0 Records )
and in status, it says everything ok, no error, process is still goin on. And in details this is the last line at the moment:
"Transfer (IDocs and TRFC): Missing messages or warnings"
Data Package 29 : arrived in BW ; Processing : Selected number does not agree with transferred n
"Processing (data packet): Warning received"
Data Package 29 ( 23810 Records ) : Everything OK.
I am assuming that there are 100 packages like this in total. Will my data load into the ODS finally??
Thanks.

Hi Chintai,
If you are extracting delta records, then you can view the number of records in RSA7.
I suggest you go to details tab of the monitor, you would be knowing the activites that are taking place..
Check if your transfer rules, update rules are done for atleast for few of the data packages.
Regards
Manga(Assign points)

Swing Applet in JSP: problem with fetching data from database

i am facing a problem while fetching data from database using Swing Applet plugged in a JSP page.
// necessary import statements
public class NewJApplet extends javax.swing.JApplet {
private JLabel jlblNewTitle;
private Vector vec;
public static void main(String[] args) {
JFrame frame = new JFrame();
NewJApplet inst = new NewJApplet();
frame.getContentPane().add(inst);
((JComponent)frame.getContentPane()).setPreferredSize(inst.getSize());
frame.pack();
frame.setVisible(true);
public NewJApplet() {
super();
initGUI();
private void initGUI() {
try {
this.setSize(542, 701);
this.getContentPane().setLayout(null);
jlblTitle = new JLabel();
this.getContentPane().add(jlblTitle);
jlblTitle.setText("TITLE");
jlblTitle.setBounds(197, 16, 117, 30);
jlblTitle.setFont(new java.awt.Font("Dialog",1,20));
jlblNewTitle = new JLabel();
this.getContentPane().add(jlblNewTitle);
Vector vecTemp = getDBDatum(); // data fetched fm DB r stored here.
jlblNewTitle.setText(vecTemp.get(1).toString());
jlblNewTitle.setBounds(350, 16, 117, 30);
jlblNewTitle.setFont(new java.awt.Font("Dialog",1,20));
} catch (Exception e) {
e.printStackTrace();
}//end of initGUI()
private Vector getDBDatum() {
// fetches datum from oracle database and stores it in a vector
return lvecData;
}//end of getDBDatum()
}//end of class
in index.jsp page i have included the following code for calling this applet:
<jsp:plugin type="applet" code="NewJApplet.class" codebase="applets"
width="600" height="300">
<jsp:fallback>Could not load applet...</jsp:fallback>
</jsp:plugin>
if i view it in using AppletViewer it runs perfectly and display the data in JLabel. (ie, both jlblTitle and jlblNewTitle).(ie, DATA FETCHES FROM db AND DISPLAYS PROPERLY)
BUT IF I CLICK ON INDEX.JSP, ONLY jlblTitle APPEARS. jlblnNewTitle WILL BE BLANK(this label name is supposed to fetch from database)
EVERY THING IS DISPAYING PROPERLY EXCEPT DATA FROM DATABASE!!!
i signed the applet as follows :
grant {
permission java.security.AllPermission;
Can any body help me to figure out the problem?

This is the Swing Applet java code
import java.awt.Dimension;
import java.sql.Connection;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
import java.util.Vector;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.JScrollPane;
import javax.swing.JApplet;
import javax.swing.JButton;
import javax.swing.JComponent;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JTree;
import javax.swing.ScrollPaneConstants;
import javax.swing.SwingConstants;
public class HaiApplet extends javax.swing.JApplet {
     private JLabel     jlblTitle;
     private JLabel     jlblNewTitle;
     private Vector     vec;
     * main method to display this
     * JApplet inside a new JFrame.
     public static void main(String[] args) {
          JFrame frame = new JFrame();
          NewJApplet inst = new NewJApplet();
          frame.getContentPane().add(inst);
          ((JComponent)frame.getContentPane()).setPreferredSize(inst.getSize());
          frame.pack();
          frame.setVisible(true);
     public HaiApplet() {
          super();
          initGUI();
     private void initGUI() {
          try {
               this.setSize(542, 701);
               this.getContentPane().setLayout(null);
                    jlblTitle = new JLabel();
                    this.getContentPane().add(jlblTitle);
                    jlblTitle.setText("OMMS");
                    jlblTitle.setBounds(197, 16, 117, 30);
                    jlblTitle.setFont(new java.awt.Font("Dialog",1,20));
                    jlblTitle.setHorizontalAlignment(SwingConstants.CENTER);
                    jlblTitle.setForeground(new java.awt.Color(0,128,192));
                    jlblNewTitle = new JLabel();
                    this.getContentPane().add(jlblNewTitle);
                    Vector vecTemp = getDBDatum();
                    jlblNewTitle.setText(vecTemp.get(1).toString());
                    jlblNewTitle.setBounds(350, 16, 117, 30);
                    jlblNewTitle.setFont(new java.awt.Font("Dialog",1,20));
          } catch (Exception e) {
               e.printStackTrace();
     }//end of initGUI()
     private Vector getDBDatum() {
          Vector lvecData = new Vector(10,5);
          Connection lcon = null;
          Statement lstmt = null;
          ResultSet lrsResults = null;
          String lstrSQL = null;
          String lstrOut = null;
          try {
               OmmsDBConnect db = new OmmsDBConnect();
               lcon = db.connectDb();
               lstmt = lcon.createStatement(lrsResults.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
               lstrSQL = "select DT_ID from P_DATATABLES";
               lrsResults = lstmt.executeQuery(lstrSQL);
               int i = 0;
               lrsResults.last();
               int length = lrsResults.getRow();
               System.out.println(length);
               lrsResults.beforeFirst();
               int recCount = 0;
               while (lrsResults.next()) {
                    recCount++;
                    lvecData.addElement(new String(lrsResults.getString("DT_ID")));
               //     System.out.println("ID : " + lrsResults.getString(1));
                    i++;
               }System.out.println("here 3 out fm while");
          catch(SQLException e) {
               System.out.print("SQLException: ");
               System.out.println(e.getMessage());
          catch(Exception ex) {
               lstrOut = "Exception Occured " + ex.getMessage();
          finally {
               try {
                    lrsResults.close();
                    lstmt.close();
                    lcon.close();
                    System.out.println("[DONE]");
               catch(Exception e) {
                    System.out.println(e);
         }//end of finally
          return lvecData;
     }//end of getDBDatum()
}//end of classOfcourse the above code compiles and runs well. in Applet Viewer
I plugged the above Swing Applet in a JSP page index.jsp
<jsp:plugin type="applet" code="NewJApplet.class" codebase="applets"
               width="600" height="300">
     <jsp:fallback>Could not load applet...</jsp:fallback>
</jsp:plugin>Every thing is working fine in AppletViewer...But if i view this in any browser, then only the jlblTitle is displaying. jlblNewTitle is not displaying(this label name is actually fetching from thedatabase)
can any body help me regarding this matter.? Thx in Advance.

Problem with upload data from CRM to BI system

When I try to perform full upload data from CRM to BI system with data source 0BPARTNER_ATTR (active version: Excutable). I waited for a long time but there are not any records were transfered (total records need to upload are 130) . I checked the log and can't find any errors.
Pls help me solve this problem.
Thanks and regard

Hi,
on the next day, the process finished with status not success.
The detail errors is:
Extraction(messages): Missing messages
          Missing message: Request received
          Missing message: Number of sent records
          Missing message: Selection completed
Transfer (IDocs and TRFC): Errors occurred
          Data package 1: arrived in BW; Processing: Selected number does not agree with transferred n
          Request IDoc: Application document posted
          Info IDoc 2: sent, not arrived; Data passed to port OK
          Info IDoc 1: sent, not arrived; Data passed to port OK
          Info IDoc 3: sent, not arrived; Data passed to port OK
          Info IDoc 4: sent, not arrived; Data passed to port OK
However, the data has been uploaded to infoobject. Pls explain to me about this error and why the data can be uploaded with this error.
Regard

Problem with applescript dates from Numbers

Can anyone explain this to me please?
tell application "Numbers" to tell table 1 of sheet 1 of front document
set value of cell ("C2") to "=NOW()"
set nowDate to (value of cell "D2")
log nowDate
end tell
results in
26 Mar, 2013 5:10 PM
appearing in cell C2, but the log tells me
(*date Wednesday, 27 March 2013 6:10:14 AM*)
I realise that the date formats will differ - and one of Yvan Koenigs's useful postings explains that when we extract a date from a Numbers table we get a UTC date time value. He also showed how to get rid of that problem with the formula :
="" & ref_to_date_time_cell
But the UTC time when I obtained the above result was 4:10 am on 26th March, not 6:10 am on 27th March. Why is this?
Incidentally, is there a better way of putting the current date into an applescript variable?

If your local time is 5:10 PM on the 26th when the UTC time is 4:10 AM on the 26th, your local time is apparently 13 hours ahead of UTC. Therefore, if the UTC time were 5:10 PM on the 26th, your local time would be 6:10 AM on the 27th. There is nothing inconsistant here. Numbers' value is a local time, but AppleScript thinks it is UTC and converts it.
In general, the current date command in AppleScript would be the best way to put the current date into an AppleScript variable; no need to involve Numbers:
set nowDate to current date
(See the Miscellaneous Commands section of the Standard Additions dictionary in your AppleScript Editor.)

Problem with uploading data from excel using BDC for tcode f-02

Hi All,
I am uploading data from excel using BDC for tcode f-02. The problem here is, while recording, the values of some fields are recording twice. I dont know why it's happening so. But if I run my abap program, I have to give those fields twice in my excel sheet. Otherwise data does not upload. But it is not the feasible way. We must give those fields once in excel. Please tell me, how I can solve the issue.
With regards,
Rosaline.

Hi,
in BDC each and every action is recording. If your press enter in same screen that also recorded once aging may be this is your case repeating field values will appear. we can solve the problem for repeat fields like below.
suppose in your excel having repeated field X1 X2 X3 the X2 contains repeated field X3 means delete the X3 field.
Now In your itab having X1 and X2 fields. While in the LOOP the ITAB pass the X2 field to repeated the fields.
LOOP at ITAB to WA.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'RM08M-EBELN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." 1st time pass the X2 fields
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'INVFO-BLDAT'.
bdcdata_wa-fval = wa-X2." pass the same value to repeated field
APPEND bdcdata_wa TO bdcdata_tab.
Endloop.
Hope you can understand.
Regards,
Dhina..

I have a problem to extract data from oracle dump file (.dmp) using oracle database or any other tools.

There is IMP utility which provides me data as graphical way. But i need extract data in such a way so that i could able to use in my application.
thanks,
mohan

Hi,
EdStevens
Actually I was using SQL Developer. Sorry for the wrong define question. Now the real problem is:
I want to read or extract data in a txt file from Oracle Dump (.dmp) file without using Oracle sqlPlus or Oracle Database.
No need to say that i am able to extract dump data using sqlPlus. But for that, there is a little burden to install oracle database
or sql Developer.
I also listen about Oracle Loader a little bit. Is it a tool for providing extraction of data from Oracle dump file.
Thanks for your previous reply,
And now waiting for your suggestion.
thanks,
mohan

Problem with downloading data from cube into flatfile

Hi,
I am writing a program to download data from cube into flatfile .The program will be run in the background with user has given his selection in a table.the program works fine .The current problem which i am facing is the character length.e.g. Material is 18 ..but in my dynamic internal table it store the value of material with length of 10 character.
So i am not able to see the output material in correct format.Anybody knows how to change this format.
thanks in advance
Yogesh Mali

Hi Yogesh,
Theorethically, you can setup the material code length in TX OMSL, which uses the TMCNV table.
Why don't you change the structure of your internal table changing material fiela length from 10 to 18?
Best regards,
Eugene

Problem with reading data from screen and inserting in table

hi ther,
im new to abap-webdyn pro. can anyone suggest how to read data from screen and insert into table when press 'ADD' button.
i done screen gui , table creation but problems with action. what the content of acton add.
is ther any link that helps me or tut??
thankx in advance!
regards

Hi,
Create a context node for the screen fields for which you want to enter the values with cardinality 1.1.....
Now in the layout of your view bind the screen input fields to that context node(attributes) to the value property of the input fields...
Now in the action of ADD button....
--> go the wizard and select the read node button and select the node which you have created it generates the auto code for you.....
for example if the node is contains aone attribute like MATNR
reading the node from wizard will generate the code as....
DATA lo_nd_matnr TYPE REF TO if_wd_context_node.
DATA lo_el_matnr TYPE REF TO if_wd_context_element.
DATA ls_matnr TYPE wd_this->element_matnr.
DATA lv_matnr TYPE wd_this->element_matnr-matnr.
* navigate from <CONTEXT> to <MATNR> via lead selection
lo_nd_matnr = wd_context->get_child_node( name = wd_this->wdctx_matnr ).
* @TODO handle non existant child
* IF lo_nd_matnr IS INITIAL.
* ENDIF.
* get element via lead selection
lo_el_matnr = lo_nd_matnr->get_element( ).
* @TODO handle not set lead selection
IF lo_el_matnr IS INITIAL.
ENDIF.
* get single attribute
lo_el_matnr->get_attribute(
    EXPORTING
      name = `MATNR`
    IMPORTING
      value = lv_matnr ).
here the variable lv_matnr will contain the entered value......
now you can use this value for further process.
Thanks,
Shailaja Ainala.

Problem with recovering data from Bit Locker enabled hard disk with bad sectors

Hi,
I have Lenovo T430 laptop with Windows 7 and Bit Locker enabled hard disk. While working I encountered blue screen error multiple times. After some time, the laptop stopped to boot by itself and started showing error 'A disk read write error has occurred.
Press Ctrl+Alt+Del to restart' message. I tried to connect the hard disk to a different PC as a secondary drive and tried to check the disk to recover the data. The 500 GB disk is showing as unallocated space and I am not sure how to recover the
data from the hard disk. Appreciate your help to recover the data from corrupted hard disk.
I used the Lenovo Diagnostics tools available in BIOS and it showed 48 bad sector errors on the hard disk. I also used Windows 7 CD and tried auto repair but it looks like it didn't do anything.
Thanks in advance!

Hi SenneVL,
Since there are 48 bad sectors on your hard disk, this means the system can not boot any more, the data might not be restored in a normal way, you'd better turn to data restore company for help.
Regards
Wade Liu
TechNet Community Support

Urgent: Problem with reading data from cube.

Hi Gurus,
I am trying to read the data from the cube. Below is my code. It returns nothing. Could any please help me to solve this.
TYPES:
BEGIN OF S_DATA,
    Z_CHAR1    like /BIC/CTABLE-ZCHAR1,
    Z_CHAR2    like /BIC/CTABLE-ZCHAR2,
    Z_CHAR3    like /BIC/CTABLE-ZCHAR3,
    Z_FISCPER like /BIC/CTABLE-0FISCPER,
    0AMOUNT    type p DECIMALS 2,
END OF S_DATA.
data:
       i_s_data TYPE s_data,
       i_t_data TYPE STANDARD TABLE OF s_data
                      WITH DEFAULT KEY INITIAL SIZE 10,
       c_data TYPE s_data occurs 0 with header line,
       i_s_sfc   TYPE rsdri_s_sfc,
       i_th_sfc TYPE rsdri_th_sfc,
       i_s_sfk   TYPE rsdri_s_sfk,
       i_th_sfk TYPE rsdri_th_sfk,
       i_s_range TYPE rsdri_s_range,
       i_t_range TYPE rsdri_t_range.
DATA: end_of_data TYPE rs_bool,
     clear: i_th_sfc.
     g_s_sfc-chanm    = 'Z_CHAR1'.
     g_s_sfc-chaalias = 'Z_CHAR1'.
     g_s_sfc-orderby = 0.
     INSERT i_s_sfc INTO TABLE i_th_sfc.
     clear: i_s_sfc.
     g_s_sfc-chanm    = 'Z_CHAR2'.
     g_s_sfc-chaalias = 'Z_CHAR2'.
     g_s_sfc-orderby = 0.
     INSERT i_s_sfc INTO TABLE i_th_sfc.
     clear: i_s_sfc.
     g_s_sfc-chanm    = 'Z_CHAR3'.
     g_s_sfc-chaalias = 'Z_CHAR3'.
     g_s_sfc-orderby = 0.
     INSERT i_s_sfc INTO TABLE i_th_sfc.
     clear: i_s_sfc.
     g_s_sfc-chanm    = 'Z_FISCPER'.
     g_s_sfc-chaalias = 'Z_FISCPER'.
     g_s_sfc-orderby = 0.
     INSERT i_s_sfc INTO TABLE i_th_sfc.
     clear: i_s_sfk..
     g_s_sfk-kyfnm    = '0AMOUNT'.
     g_s_sfk-kyfalias = '0AMOUNT'.
     g_s_sfk-aggr     = 'SUM'.
     INSERT i_s_sfk INTO TABLE i_th_sfk.
      clear: i_t_range, i_s_range.
      i_s_range-chanm    = 'Z_FISCPER'.
      i_s_range-sign     = rs_c_range_sign-including.
      i_s_range-compop   = rs_c_range_opt-equal.
      i_s_range-low      = 200601.
      i_s_range-high     = 200606.
      APPEND i_s_range TO i_t_range.
        CALL FUNCTION 'RSDRI_INFOPROV_READ'
          EXPORTING
            i_infoprov             = 'ZC_CUBE'
            i_th_sfc               = i_th_sfc
            i_th_sfk               = i_th_sfk
            i_t_range              = i_t_range
            i_reference_date       = sy-datum
            i_save_in_table        = rs_c_false
            i_save_in_file         = rs_c_false
            i_packagesize          = 20
          IMPORTING
            e_t_data               = i_t_data
            e_end_of_data          = end_of_data
          CHANGING
            c_first_call           = i_first_call
          EXCEPTIONS
            illegal_input          = 1
            illegal_input_sfc      = 2
            illegal_input_sfk      = 3
            illegal_input_range    = 4
            illegal_input_tablesel = 5
            no_authorization       = 6
            ncum_not_supported     = 7
            illegal_download       = 8
            illegal_tablename      = 9
            OTHERS                 = 11.
            append lines of I_t_data to c_data.
Thanks
Regards
aarthi
[email protected]

Due to the nature of the cube design, that would be difficult, that's why there are API's, FMs, and MDX capabilities - to eliminate the need to navigate the physical structure. Otherwise you would have to concern yourself with:
- that there are two fact tables E and F that would need to be read. The Factview could take of this one.
- you would want to be able to read aggregates if they were available.
- the fact table only as DIM IDs or SIDs (for line item dims) to identify the data, not characteristic values. A Dim ID represents a specific combination of characteristic values.

Problem in extracting data from source system

HI
I am comparing source system and data in bW for a particular datasource.In this process in source system transaction RSA3 when i am trying to extract data its not showing the exact count.I couldnt able to understand the setting options like Datarecord/calls & Displa extr.calls in transaction RSA3.can some one assist in this..?

Vara Prasad,
I do know about the popup , but then the popup is displayed only AFTER the extraction completes. Asusming that you have about 10 million records - I cannot find the number of records without actually extracting it and my RSA3 will fail because it is too large of RSA3 , I was talking about if there was a method by which I could fins the number of records alone without extracting the data / running RSA3.
Also if your extractor has 20,000 records , and if you set 10 datapackets of 1000 each the popup will display 10000 whih is incorrect and you would have to increase the data packet / package size to finally arrive at the right number...

Problem with extract data from R/3 to BW

Similar Messages

Maybe you are looking for