Problem with F110 posting
Hi i m trying to post using F110
I have entered parameters and run the "PAYMENT PROPOSAL"
When i display the Payment proposal log....its giving an error
"No suitable bank can be selected for company code 1234 pmnt mthd C in USD
No permitted payment method exists"
Please help!
Thanks!
HI,
Goto FBZP , check the Bank determination, check for payment method ( and Bank )is matching with your payment run or not? it is not able to pick up the bank ..i guess
payment method C and currency USD and house bank entry is missing it seems.
check the ranking order if u dont find entry then you make it.
Similar Messages
-
Problem with depreciation posting for an asset with a '0' net book value.
Hi,
I have a problem with depreciation posting on one asset. I think it should not be calculated and posted at all.
On 1st November 2010 (our Fiscal year starts on 1st November) there was acquisition posted to an asset and then it was reversed on the same day - so the net book value was '0'.
In AFAB depreciation run for April 2011 - it posted depreciatoion of 0.01 Euro, so now the book value is -0.01.
Do you know how this could have happened and what can I do to get the value of this asset back to 0?
Thank you,
KarolHi Murlidhar,
Thank you for your reply.
I just have one doubt - as depreciation of 0.01 Eur was posted in previous period leaving net value of asset equal to -0.01 Eur.
Shouldn't I get ritd of this asset value before I proceed with the steps you suggested?
I think it is not possible to reverse the depreciation - so I struggle to find a way to bring asset value back to zero.
Thank you,
Karol -
Problems with the posting period....
Hi guys,
every once in a while the old problem with the posting periods occurs. This morning it hit me and I went out to repair it.
Starting out from MMRV I checked the open period and it said 062009.
Using MMPV, by mistake, I opened 112009, so that I'm able to post to 112009 PLUS the previous period 102009 (which is ok so far). Later on I checked OB52 to see, if finance is not the problem. The opened period lasts from 012009 to 122009.
Long story short: everything seems perfectly alright, however it still doesn't work. It says: Posting only possible in periods 2009/11 and 2009/10 in company code 1000
I don't see where there could be a problem now...
Any help is greatly appreciated!
Thx & regards,
BobbyHi,
It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.
If there has already been postings after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
Steps are as below;
Go to Transaction Code SE38
Enter program name RMMMINIT
Execute or press F8 function button
Enter your company code (From and To)
Enter relevant date: Say 01/10/2009 for Oct. 2009 month to be opened as of now
That means, user can post for the month of sept 2009 as well as Oct. 2009
Refer SAP Note No. 487381 for more details.
As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
Again go to MMPI enter company code, period and year and execute.
Other way of doing it is follow these steps: ( *TRY in Sandbox But do not try in PRODUCTION SYSTEM*)
1. Use t.code: OX18, and delete the plants assigned to your CO.Cd and save.
2. Use t.code: OMSY and change the posting period to the one u want and save.
3.Go to OX18 and assign the plants you have deleted in step 1.and save.
Regards,
Biju K -
Hello guys,
i have some problem with F110 transaction,it is taking 30min and more for running a proposal.
can u tell me what would be the reason?
Best regards
BigyDear Bigy,
Are you processing this transaction in foreground or background?
I sueggest you to check the buffer space available in your system. Go through this transactions:
ST01 System Trace
ST02 Setups/Tune Buffers
ST03 Performance,SAP Statistics, Workload
ST03G Global Workload Statistics
ST03N R/3 Workload and Perf. Statistics
ST04 DB Performance Monitor
ST04_MSS Monitoring SQL Server (remote/local)
ST04M Multi DB connection
ST04N Database Performance Monitor
ST04RFC SAP Remote DB Monitor for SQL Server
ST05 Performance Trace
ST06 Operating System Monitor
ST07 Application monitor
Hope this will help.
Regards,
Naveen. -
Has anyone experienced a problem with FB posting since the installation of iOS 6?
Since the installation of iOS 6, I noticed that when I post a photo on FaceBook it does not show that post using my iPad or iPhone. I posted using my iMac and within seconds it showed up on two devices mentioned above. Please help.
Hello,
I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch/Ipad/Iphone/Ipod Classic, so I will try to find a solution to your problem.
Do the IOS update (the one that is the latest)
Reset All Settings: SETTINGS>GENERAL>RESET>RESET ALL SETTINGS
Use it until it dies (automatically shuts off)
Plug into Charge
Leave it 1.5 hours or longer after it reaches 100% --> Undisturbed (preferably overnight)
Give it a few days to Calibrate
This has helped me on my Ipod Touch 4th generation, running IOS 6.0.1
Hope that helps!
If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
Cheers!
Pizza98704 -
Audio problems with Rezound, post software update
Hi All,
I had my Rezound for about a month before the firmware upgrade and never experienced any issues with audio playback through my headphones. However, since my phone was updated I'm getting consistent audio glitches. There are two types that I've noticed. The first is a high pitched whine that last for 2-10 seconds before fading out; this has happened consistently since the update. The second is a wave of static that's gets louder and messier until I pull out my headphones and I noticed this yesterday for the first time. I thought the firmware update was in part going to fix the Rezound's audio problem.
Has anyone else had these audio issues since the firmware update?
Is this currently a fixable problem?
Thanks!I also had no problems whatsoever prior to the update, including no audio issues. I have also recently noticed audio problems post update. These problems seem to be very intermittent and I haven't been able to connect their appearance to anything specific. I have noticed 2 problems, the wave of static problem and also a loud "click" that is very noticeable but kind of in the background. I'm ready to pursue other avenues of resolution for all the problems with this phone which I originally loved!! Verizon's answer is "you're stuck with it" or "we're working on it" or "we will send you a used phone" (so I can enjoy experiencing the same problems on a phone from who knows where with who knows what history after paying $300 dollars just 2 months ago)!! I am so tired of having to deal with the boot-looping problem!!! Why is it acceptable to sell or create a defective pricey electronic device with complete impunity? This would not be acceptable and would result in immediate and consequential retaliation in my career! Any one want to discuss what we might be able to do?
-
Problem with Editing Post !!!!
I am unable to edit my post?
Each time I try to go back and edit a word etc..
the board will generate a new posting instead of changing what
I just edited!!!
If they can't get it right I'll just stay off the site!
Apple should take the time to fix these bugs!
Looks like they already turned over Tech Support to this Discussion forum
If they don’t fix it, this may be my last post.
Compaq PC / 1GB Ipod Nano & 80GB Video Windows XP Pent 2.53 GHZ 512MHZ MB RAM 120GB HDOne sure way to end up with multiple posts of the same thing is to use the Back button to access the just-written post - each time that is done and the Post Message button is clicked, a new iteration of the message will be generated.
Using the Edit button should not generate a fresh copy of the message; to help notice where one is, the Edit page is a bit different than the original create message page, and uses a "Save" button rather than a "Post Message" button. -
I have been having a discussion with Tiest van Gool working through a problem implementing the example in a weblog:
/people/thomas.jung3/blog/2004/09/02/creating-a-bsp-extension-for-downloading-a-table
This morning I have been unable to post comments to any weblogs (I keep getting a message that I am not logged in - even when I clearly am logged in). Since we are working through a problem, I don't want to hold up my response. I hope that no one minds that I am going to continue the conversation here (and hopefully Tiest van Gool follows the BSP forum).
Tiest wrote:
Thanks for your answers and I guess it was quite late when I finished up because, yes, I had forgotten the extension definition in my pages. Regarding the second question I mistakenly mentioned method 'DO_AT_BEGINNING', I am refering to method 'DO_HANDLE_EVENT' in stead. Besides that I have on more issue that boggles me. The page seems to work fine but when I select the "download' option, a pop-up does appear but there are no values in there. Any idea what the reason for this might be? Thanks for sharing with the lucky few, all your knowledge. Tiest.
The DO_HANDLE_EVENT is a method in my controller class. This method is fired by the framework whenever a server event fires. If you are not working with Model View Controller, then this same logic can be placed in the OnInputProcessing Event Handler of yoru BSP Page.
Now why your texts aren't showing up is a little more difficult. I used text objects in my example. Are you coding in one language, but displaying in another. If so this might just be a missing translation issue. You might try replacing the text elements with just plain hard coded text to see if that makes a difference:
* <wa_menu>-text = 'Download as HTML'(d04).
<wa_menu>-text = 'Download as HTML'.Hi Sandeep,
It seems that you have post it on background only, because this is a large volume of data and this IDOC generally uses a BDC at the end to update database, so that might be causing the error.
Also you can try out some filters so some unwanted data will be blocked, or even a IDOC reduction technique can be used if applicable.
Best Regards,
Tapodipta Khan. -
Hi .. i,m facing an issue with intercompany Invoice posting .
I'm having delivery note as a reference to that invoice but im getting error message that delivery note doesnot exist..
i have entered correct delivery note..
how this can b overcome?
Thanks and regards..
Manojhi,
for having del. note as ref in MIRO, first you must have entered the same del. note while making GR (MIGO), then only that is possible.
Have you done that,
other wise PO ref is the best & will work anyway
Regards
AK -
Problems with forum posting editor
Many times that I use any text formatting or (not sure what), when I try to preview or post the reply, I get error:
Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied.
Can anyone confirm they've seen the same issue?
Where should this bug report be directed?
When that error msg appears, nothing is ever been removed. The same text formatting & all content are the same, but it still doesn't allow submitting or previewing it.
It also doesn't highlight the errors,so they can be corrected. Just lets you guess.
When previewing or submitting this post, it gave the error. The 1st time, I found an extra blank line (a blank line?). Removed it, then I could submit.
To further test, I added basic formatting (bold, italics) & changed color of a word. Once, it accepted that. Another time, it didn't.
I removed all that formatting (by most editors' process) - still didn't like it.
Found it was the text color. It was removed on the page, but still a problem. I deleted the word & re-typed (no color). It accepted it. Takes too much time guessing - like a blank line.
If it requires plain text - OK. Just remove the wysiwyg & don't allow any imported / pasted content to be anything but plain text (remove all formatting).
I don't have this problem on any other forum that I remember. Thanks.Thanks, but nope - it's too inconsistent. Very. In the same post / reply, within a few min. span, or different days & posts or replys. Doubt that's related to moving up ranks?
Besides, how long do you have to be a member, how many posts, etc., before it allows using HTML, that 90+% of all forums allow the 1st day?
It's too much trouble, just to see Preview (no other forums work like this). Just because I accidentally hit Return twice?
I'd rather ditch rich text - but don't seem to be able.
I turned it off in CP settings & saved (it's still disabled in settings, after logout & login).
Logged out, closed page / tab.
Cleared all cookies, cache, etc.
Logged back in. Rich text still showing in the Post or Reply editor, though is still disabled in CP.
Most every forum will remove extra blank lines, spaces (if doesn't like them) - not force users to review every space.
If formatting (any) doesn't work, or if user hasn't achieve proper rank, just disable formatting toolbar.
Thanks. -
Problems with HTTP POST - HttpConnection
I am trying to send the data of a Textfield via a HttpConnection and POST Method.
Therefore, the Content-length request header is set to to length of the byte-Array accordingly.
Problem:
If Content-length is not set, the data is written to the output stream but then - i guess - the servlet doesn't parse the body of the request and request.getParameter("username") does not work from the servlet.
If it is set (Content-length), the data is not being transmitted!
connection = (HttpConnection)Connector.open("http://localhost:8080/servlet/VpeNetworkServlet");
connection.setRequestMethod(HttpConnection.POST);
//Build the Postmessage
String requestBody = "username=" + username;
//Transform the String to a Byte-Array
byte postMessage[] = requestBody.getBytes();
//set the length of content
//connection.setRequestProperty("Content-length", String.valueOf(postMessage.length));
//POST the data
os = connection.openOutputStream();
//Write it to the OutputStream
os.write(postMessage);
for (int i = 0; i < postMessage.length; i++)
os.
os.write(postMessage);
//flush the buffer!
os.flush();
Can anyone help?? Submitting via GET works perfectly, but I prefer POST over GET.
Thanx,
SVENHi Yaron,
do you have any suggestion about encoding data? I really have no idea about this. How to encode data and which technique we should use?
Thanks
Udsy
Hi,
There are 2 things that may help you :
1. use:
connection.setRequestMethod(HttpConnection.POST,READ_WR
TE);
2. Use:
connection.setRequestProperty("Content-Type","applicati
n/x-www-form-urlencoded" );
Notice:
You need to encode the data before sending it ovet
http.
Hope it helps,
Yaron G. -
Problem with New Posting Period
Hi Experts,
I am trying to create a new posting period for 2009 but the system will not update. I have done this for several companies on the same server and it worked but for some it wont work. I do not get an error message, the system does not respond at all.
I am using SB0 3005 A.
Regards,
LeboHi,
Check Note No. [1079168|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1079168]
Regards,
Jitin
SAP Business One Forum Team -
Problem with the Posting Date of Goods Receipt or Invoice Receipt for PO
Hi All,
I am working on 2LIS_02_SCL - Purchasing Data (Schedule Line Level),
For our report, we should get the scheduled PO quantity,actual PO qty, Scheduled date and actual date in the report.
we are getting all these fields from the above extractor...
For a PO which is opened (Delivery Completion indicator not set) - we where getting all field as in ECC(ME23N)
But for a PO which is finished(Delivery completion indicator is set) - we where are getting actual GR qty,planned qty,planned or scheduled date at schedule line level.But we are not getting the Posting Date of Goods Receipt or Invoice Receipt for PO from history EKBE for all the schedule line.
ex:
for open PO
PO num item num schedule line Planned date actual date difference actual qty planned qty difference
450002432 10 1 01/10/2011 02/10/2011 1 day 100 100 0
2 02/10/2011 04/10/2011 2 days 200 400 200
3 03/10/2011 07/10/2011 4 days 300 300 0
For the same PO when it is Finished or completed(Delivery completion indicator is set)
PO num item num schedule line Planned date actual date difference actual qty planned qty difference
450002432 10 1 01/10/2011 07/10/2011 6 day 100 100 0
2 02/10/2011 07/10/2011 5 days 200 400 200
03/10/2011 07/10/2011 4 days 300 300 0
for all the schedule line its displaying the last posting date(i think its taking from EKKO table)
Is there any possibility to get that posting date history ....You can have multiple receipts against a PO schedule line, but this extractor is not meant to go to that level of granularity. Please try to use 2lis_02_sgr instead which provides goods receipts per PO schedule line.
-
hi Experts,
i have taken 5 materials in my sales order, and do PGI via VL01n for 3 materials.
after that we got some error in my Delivery Documents, so i reverse my Delivery document by using Tcode VA09,
after reversing, we have an option to change the Quantity of material or reduce the number of material,
but the problem is that, now i want to include the remaining 2 materials in my same delivery document.
can i do this, if YES then how?
thanks and regards,
Vishal SinghDear,
In VL02 on the top click on DELIVERY DOCUMENT -- DELIVER SALES ORDER -- PUT ORDER NO. and also give selection for
Line ITEM in pop screen.
Regards
AJIT K SINGH
HAPPY TO HELP U
Edited by: AJIT K SINGH on Dec 22, 2009 5:46 PM -
Problem with rowNavigation posting order.
I have a MainViewObject with a ComboBox bound to an attribute (AttrComboBox).
The ComboBox LOV is derived from LovViewObject.
I have a ViewLink between LovViewObject and MainViewObject so the rows in LovViewObject depend on another attribute (AttrDiscriminant) in MainViewObject.
This works fine except...
It appears the rowNavigation event is given to MainViewObject's bindings before it's given (via the ViewLink) to LovViewObject.
The consequence is that when AttrComboBox tries to set its new value for the navigated row, the new value is not in the LovViewObjects's rowset as it hasn't been notified of the navigation yet.
The result is that the ComboBox displays blank even though the underlying AttrComboBox has the correct value.
How can I make sure the LovViewObject gets the rowNavigation event before the ComboBox binding does?
Tony.There are a few ways you could do it.. here's some suggestions..
If you're familiar with Excel macros, you could write an Excel macro that would take the imported data and format it the way you want it displayed.
If you're familiar with XSLT (okay, well, nobody is really familiar with XSLT, but if you can write enough XSLT to get the job done) you can use that to transform the document into the format that you want.
Have you tried ordering the fields in your form in the Hierarchy View so that they're in the order you want imported? I don't know if we guarantee that the order of the fields won't change, but I tried it in a test form and I find the output I get is always in the order that I've arranged the fields in the hierarchy.
The tab order wouldn't affect the order that the data gets written out in, but the hierarchy order would.
SteveX
Adobe Systems
Maybe you are looking for
-
Hello, can I get latest bios to my graphic card ? Current version NV316MH.186 My S/N: 602-V316-130B1505014241 Thanks
-
Why in Doha (Qatar) Iphone 4S doesn't connect to the GSM?
In Doha it seems that Iphone 4S cannot connect to the GSM; my old 3 and 4 were ok. It happens also with Iphone 4S of my friends.
-
Why has my apple tv forgotten my purchases after the upgrade?
I have had to re-enter all account and wireless details too, but the thing that really doesn't work is that it has no history of my purchases. Any ideas anyone?
-
PS CS5 opens but canvas invisible unless in motion
This is my story. Please read carefully, as I'm about to pull all of my hair out...I know this is long and detailed, but I'm trying to anticipate questions y'all might ask. I'm an experienced Photoshop user. I just installed Adobe CS5 (the whole suit
-
CS2 created loader, need to update to CS5
Hello I'm just learning about loaders and i have a loader created in CS2 and im using it in CS5 it seems to work correctly but has a few compiler errors. I tried to clean it up but only made it worse, anybody want to take a shot at it: var my_loader: