Problem with Facebook & Twitter integration in OS X Mountain Lion

I recently downloaded OS X Mountain Lion from App Store, everything went okay until the next few days I noticed that Facebook and Twitter integration doesn't seems to work anymore. Whenever I clicked on 'Click to tweet or post', nothing happened. Help me..Thanks.

Same issue on my machine, OSX 10.8.2, mid-2010 MBP 13-inch
Nothing happens when clicking on "Click to Tweet" & "Click to Post" on the Notification area.
Have done the "Remove all website data" and "Reset Safari" procedure, but to no avail.
Sharing button on Safari works. It's only the buttons on the Notification Area that do not work.

Similar Messages

  • Problem with Logic Pro and Soft eLicenser on Mountain Lion?

    Hi!
    I have a bunch of Arturia synths, which requires the Soft eLicenser to work. This has always worked great with Lion, never any problems with eLicenser (never had to open it etc.)
    Now - I upgraded to Mountain Lion, and tested my synths to make sure everything was OK, experienced a bunch of problems, and did a full recovery to clean Mountain Lion.
    After installing the Arturia synths, and adding my licenses, I installed Logic. Everything worked fine!
    BUT!
    When I closed an Arturia synth within Logic, or closed Logic after running a project with one of these synths, I couldn't reopen any of these synths within Logic afterwards - In fact, I couldn't open the stand-alones either! And when I tried to open the eLicenser Control Center, it would just say "Reading eLicensers" forever. After a reboot, everything is OK.
    I can open and close eLicenser Control Center and standalone synths as many times as I want, as long as I don't open Logic, and then Arturia synths as an AU in Logic.
    I found a workaround: Open the eLicenser Control Center, and let in run in the background (cmd+H), and then open Logic. Then I could open Arturia synths and close them, close Logic and reopen etc. without any problems at all. NO PROBLEMS.
    Until I close the eLicenser Control Center, then I have to reboot to be able to start it again.
    I hope you understand what I mean here. It's a bit hard to explain.
    In short terms: Logic makes Soft eLicenser crash when a eLicenser synth has been opened as an AU.
    The same problem is when scanning the AU with AU manager. eLicenser window should be open before scanning.
    Does ANYBODY have the same problems? Can anyone who has these applications test it out?

    So it definitely seems to be a issue with Logic.
    I can't force this error in 10.7.X no matter how hard I try, but in 10.8.2 it's definitely Logic messing things up.
    Could it be auvaltool which has a bug? Or is that only run with AU manager on validation?
    Hopefully this discussion can get some attention, and maybe it could be corrected. I guess a lot of Logic Pro users also has eLicenser Control Center for validation of their products.

  • Is anyone having problems with the Notes feature in the new Mountain Lion OS?  When I open this feature it begins to pinwheel and then it closes and I get an error message!

    I am getting an error message when opening Notes with the new Mountain Lion OS.  When it opens it begins to pinwheel and then it closes and an error message box opens up.  Is anyone else having this problem?

    Try this: http://forums.adobe.com/message/2796075

  • Problems with my m-audio nrv-10 since mountain lion update

    I recently updated to mountain lion and now my M-Audio NRV-10 sound board won't register with Garageband, It finds the board and lets you select to use it but when I try talking through my microphone it doesn't register sound in Garageband (it is registering sound through the board itself). Does anyone have any fixes for this or indeed know why this is the case?
    This has come at a really annoying time since I have a podcast ready to go that just needs my spoken parts and I really don't want to use the built in microphone.
    Any help would be great

    FWIW, I've used an NRV-10 with mountain lion and garageband without problems.
    one thought: make sure you have the latest drivers from M-Audio.

  • Problems with Mail (on O2) since upgrade to Mountain Lion

    After having spent a frustrating few days trying to get this sorted, I thought I should make folk aware of the above problem. Since upgrading to Mountain Lion I have not been able to send email using smtp.o2.co.uk. The O2 call centre notes that a number of folk have been having this problem.
    Some have suggested setting Custom Port to 25 but this hasn't worked for me.
    Apparently O2 are going to get back to me within 5 days with an answer. I'm not holding my breath but am pleased to say I can still use my iPhone to send email.
    Can't help but wonder if this has anything to do with the fact that I signed up for an iCloud (***@me.com) account at the same time.
    Any thoughts?

    I got a fix. it works for me. while i'm on ML. safari and mail doesn't work properly. mail can't send emails with attachment and safari unble to open certain webpages.
    i've log into my Internet modem, enable router mode from bridge mode. it works fine now. no promlem with sending emails or surfing the web. hope it'll helpful for u guys.

  • What are the problems with Photoshop Elements 10 and  iPhoto in Mountain Lion?

    I have Adobe Photoshop Elements 10 and would like to install it on my new iMac with Mountain Lion. I have read about compatibilty issues with iPhoto.  Is there a way to correct this or is PSE 11  a better option? 

    Can I suggest posting this question in the iPhoto forum?  There are some true iPhoto wizards there who probably know the answer to your question.
    Here's a link for you:
    https://discussions.apple.com/community/ilife/iphoto

  • Problem with Admin access to downloaded apps in Mountain Lion

    I am using a full admin account on my MacBook, running Mountain Lion Version 10.8.2.
    I have downloaded 2 applications and installed them.
    When I try to open the applications, I keep getting the following message:
    Cannot install required resources.
    Your user account doesn't have sufficient access privileges. You will need to run this game once from an administrator account. Afterwards, you will be able to run it from this account.
    What I do not understand is that I AM doing this from a full administrator account. ALL of the profiles I have on my laptop are full Admin accounts.
    What am I missing?

    Thanks. I really appreciate your help.
    Unfortunately, after doing both, neither action solved it.
    I am seriously beginning to regret migrating to Mountain Lion. Should have stuck with Snow Leopard...

  • Problems with my Time Capsule since updated to Mountain Lion

    Since I have updated my MacBook Air (late 2010 model) to OS X Mountain Lion, I am experiencing problems connecting my Macbook Air to Time Capsule and experiencing problems in Time Machine copies to the Time Capsule:
    1.- When I turn on my computer, Time Machine starts working, taking a lot of time searching the backup disc (my Time Capsule), then appears an error message (Can not find the disk or it says that the Time Capsule is already in use);
    2.- After several attemps (restarting the computer and restarting the Time Capsule), sometimes Time Machine starts to work, but it shows that it has to copy approximatly 28 G. Also the copy is to slow (it only copied 500 Megabytes in two days).
    In the meanwhile the Time Capsule light is turned on (green) - so it seems the Time Capsule is working normally an the problem would be Time Machine.
    I would not like to restart everytime my Time Capsule or restart my computer in order to make Time Machine works. I would really appreciate help for solving this problem (I apologize for my so basic English).
    My Airport Utility Version is 6.1 (610.31)
    My Time Capsule Version: 7.6.1.
    My Computer: MacBook Air (late 2010)
    My System: OS X Mountain Lion (when I used OS X Lion all was working normal)
    Thanks in advance for your help !!!

    The first backup after an update will be quite slow (but shouldn't be anywhere near that slow).  And the searching on the backup disk will have to be repeated on every backup attempt until one completes normally.
    Connect to the TC via an Ethernet cable. 
    Also see the green box in #D2 of Time Machine - Troubleshooting.  Something there may help get back on track.
    (and your English is fine -- better than many who speak it natively, I'm sorry to say.)

  • Problems with my second monitor after upgrading to Mountain Lion

    Basically I have a Mac Pro 8-core with two video boards (2 x NVIDIA GeForce GT 120 512 MB) connected to two monitors. After upgrading to the Lion Mountain, 90% of the time when I start my MAC the second monitor doesn't show it image, keeps in full black screen, what puzzle me is, I can see the mouse arrow on it, so its alive, but its in black, than I have to restart the computer over and over again until it finally make the second shows it contains.
    Have anyone experienced the same problem?!

    Hello Carlo!
    Sorry but I don't understand which part of my question is not clear. I've been to the Apple Store, they asked me to bring my 20kg Mac Pro and both 24" inches Eizo monitors to central London to have it checked. Well, honestly, this is impossible, is an invitation for an accident.
    Is just unbeliavable that no one has experienced my problem, looks like I am the only one person with two monitors using the Lion Mountain.

  • Upload data problem with HUAWEI E173 t mobile broadband and Mountain Lion

    I upgraded to Mountain Lion and updated my T Mobile Broadband software. It successfully connects to the internet.
    But within minutes I had exceeded my fair usage policy having browsed five websites!
    In T-mobile Internet Manager the Statistics shows huge amounts of data being uploaded ?in the background by OS X.
    It is not syncing devices in iCloud. I have no other programs open.
    It's uploaded 188MB in 30 mins. I have no idea what this data is or how to rectify this. Help, please?!

    Until you can install updated 64 bit software or get hold of a 64 bit T Stick..
    Boot your mac into 32 bit mode by holding down the 3 and 2 keys which should work OK.
    Lion is 64 bit..

  • Problems with Trainz Mac since upgrading to OSX Mountain Lion

    I have tried various screen resolutions but to no avail. The objects in the game have become very small.
    Any Ideas Please

    Try the app developer's FAQ's >   http://support.auran.com

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • I have problem with facebook

    Hi, 
    I have problem with facebook. I have smartphone Blackberry Pearl 9105 3G and I want to use facebook without wifi but i can`t and I don`t know what should I do. 
    I hope u`ll help me

    Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
    Call your carrier and inquire about having the BlackBerry Data Plan added to your account.
    Good luck.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problems with the groupware integration

    Hy experts,
    I have some problems with the groupware integration in SAP. I synchronize a own customized contact with a outlook date.
    The current problem is, that the outlook date are not generated only for one person. The Sales Representative and the Sales Representative get each a date.
    I have customized ‘Map Activity Text Types and Business Partners to Groupware’ with:
    Description= sales visit
    Text Type = Z003 (Outlook information – our own texttype )
    Planner =  00000022  (Person Responsible )
    Fct. Participnt = empty
    Fctn: Cont. Person = empty
    Can anyone tell me, how to customize the system, that only the Sales Representative get the date.
    I hope for help.
    Kind regards
    Torsten

    hi
    it is pretty simple
    you just maintain the calender mentainence only for the sales represntative,
    make sure that the person you want to display on calender ,the function category for that should be activity partner only
    and in transaction also maintain the calender settings
    just "person responsible" should have flag of callender as checked ,rest should be unchecked
    so just go inside your PDP and therein partner function maintain the settings
    in case of any doubt please revert back
    best regards
    ashish

  • I'm having problems with facebook notifications.  The sound doesn't work but shows up in banner.  Any suggestions?  I've tried everything but restoring.  Is it a phone problem or an app problem?

    I am having a problem with facebook notifications.  The sound doesn't work but appears as a banner.  I've tried everything but restoring the phone.  Is this a phone problem or an app problem?  Has anybody experienced this problem and were they able to correct it? 

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Maybe you are looking for

  • My itunes wont copy and paste from a shared library

    I am trying to move my itunes library from one computer to a new one. I can see my shared library, and copy the list of music, but then it won't paste into my new library. My daughters computer with itunes will paste her shared library, and when view

  • Why is the video buffering when downloading

    why is the video that I am downloading buffering on my imac.

  • Explain Plan for Multiple SQL

    Hi , Our db version is Oracle 8i and looking for solution. I have multiple select sql statments and need to get the explain plan for all statments. Is it possible to take explain plan for all statments one time? If so please provide the steps. Thanks

  • Price limit for material -- very urgent requirement

    hi gurus, i m facing a prob., actually we want to assign a certain amount for a material and we ask our users to procure that material from any vendor, But they can not exceed that limit which we had defined  while creating the info-record and Purcha

  • How can I work with report columns in computation or validation?

    Hi all, I have an updateable report. Bevor submitting canges, I want to do computation or validation on one of the report columns. But a report column is not an item. Is there a possibility to work with report colums? Thanks, Daniela