Problem with fading out particles in cs5

I have a problem with fading out particles or anything for that matter in my CS5 after effects! I set up the key frames right. O opacity at first and whatever number at next and it fades in fine, But when I try to do the reverse it will not fade out and only stops the effect if I cut its durration at the red par representing it on the top of the time line. This produces and rough aburpt cut of the effect which will not due. Please can anyone tell me what I am doing wrong that I can't fade out particles with opacity?

First question: What OS and what's the build of CS5.5?
Second question: What effect are you using? There are a bunch of ways to generate particles.
Last question: if you turn off the effect can you get the layer to fade out? Pressing Alt/Option + t will set a keyframe for opacity on your layer and reveal the keyframe in the time line. Do that, set the value to 0, then move down the timeline a few frames and set the value to 100. This should generate another keyframe. Now move down a few more frames and press Alt/Option + t or change the value for opacity to anything and then back to 100, or copy the previous keyframe and paste to set a 3rd keyframe. Finally move down a few more frames and set the value to 0. You should have 4 keyframes in your tlimeline for opacity. If you want to clean up the layer press Alt/Option + ] to set the out point for the layer.
Everything should work just fine. Turn on the effect and your layer and the effect should fade out.
If you want to do something else with the particles, like fade out a particle over the lifetime of the particle we'll need to know which plug-in you're using.

Similar Messages

Problems with TV Out signal after upgrading to iOS 5.1

Has anyone experienced problems with TV Out signals on their iPad 2 using the Apple HDMI Adapter after upgrading to iOS 5.1? I am trying to connect to my HDTV after upgrading and cintunally receive an "Unsupported Video Signal" message with a blank/back screen. Prior to upgrading, I had no connection problems and could view TV Shows, Movies, Music Videos, Keynote, etc...without problems. I've been unable to find any resolution to this problem, even followed Apple guidance to detach and reattach the HDMI adapter without success. Seems like a software bug to me and it's a major problem when trying to conduct business or personal activities. Hopeing Apple has a fix in work already...anyone else have any ideas? Thx in advance...

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
If that does not work, restore the iPad to the factory settings.

Problems with filling out PDF forms

We have problems with filling out PDF-forms. Aotomatic filling of forms is deactivated and we use the Adobe Reader 11.0.05. The problem is: After some time the inputs are wrong put down in the form. For example: I write 120 and in the form stands 125. We have already extinguished the cache. Thanks for your help in advance.

You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane.

Has anybody had a problem with greyed out wifi on i phone 4 gs

Has anybody had a problem with greyed out wifi setting on iphone 4gs

Forty four in the last week.
wifi greyed out

Problem with using mouse scrollwheel within CS5?

Hey all. Just upgraded my PS from CS3 to CS5, and I seem to be running into issues with the scrollwheel on my mouse.
When trying to use it from inside CS5 (say, inside a long 'Open...' window), it seems to lock up the entirety of Photoshop for a moment or two every few seconds. Checking the net out there, it looks like there appeared to be a problem with mouse wheels, but that was supposedly fixed nearly a year ago.
I checked for any updates or patches, but the most recent update I can see on the Adobe site is to 12.0.4, which has me doubly confused, as my copy of CS5 say that it is version 12.1, which, theoretically, is a more recent copy...?
I can provide system info, etc. if needed, but since I have not found anything along these lines since a year ago, I'm guessing there's probably some simple thing I'm missing somewhere.
Thanks in advance,
Steve M

You mean Photoshop plugins? No, the version of CS5 I'm having issues with is fresh as a daisy, just digitally downloaded and run for the first time earlier today. I think my old copy of CS3 has some, however, although since they are not being loaded into CS5 (presumably) I'm guessing those wouldn't be the culprit. If this helps any:
Model Name: Mac Pro
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
L2 Cache (per processor): 12 MB
Memory: 4 GB
System Version: Mac OS X 10.5.8 (9L30)
I'm using a Logitech Performance Mouse MX.
Thanks,
Steve M

Problem With File Crashing in Photoshop CS5

Hello I have a design file that I just created in Photoshop CS5 last night. I went in to do some editing today and it keeps craahing within a few seconds of being opened. I have never had this problem with a file before and I need it to turn in at work. ANy helpful ideas out there on what may be happening? It's happened at least twenty times now....

If you do a search, you will find several threads dealing with file corruption in CS5/ CS5.1. The long and short of it is, that the file is a goner, but feel free to try things like opening it in another program (Art Rage, Corel Painter, GIMP) or image viewer (XnView, ACDSee) to recover at least parts of it...
Mylenium

Problem with 'Fade Out'

As part of an edit, I am trying to both 'Fade In' and 'Fade Out' of a particular video. The 'Fade In' works fine, but I'm having problems with the 'Fade Out'. For some strange reason, while the video part of it fades out properly, the audio that also fades out is not the correct audio - it is audio from earlier in the video (I'm assuming that - it is a live music video - the part that is fading out is crowd response, but the audio somehow has music in it)
This is my first time using iMovie '08 - I have used past versions of iMovie over the last few years and have NEVER had this problem. Any suggestions or known fixes? Any feedback much appreciated.

still confused. I don't get a yellow band when I select a clip - it just kinda gets highlighted.
Also - when I go to audio FX in the editing field, it really has nothing to do with selecting audio - just a bunch of equalizer options. Not really sure why a basic fade out wouldn't control both the video as well as audio of the clip. It always did in previous versions of iMovie.

Problems with spry accordian widget in CS5

I am updating a client's website and am having problems with the spry accordian widget. I read that it has been replaced with jQuery in the latest version and am told I can modify my existing spry widgets but cannot add new ones. In trying to modify the existing widget I get error alerts. I guess adding a new accordian tab is not considered a modification of the existing widget. I only have CS5 version of DW. What to do? Thanks in advance for your help.

Hi Patricia,
you with your CS5 can continue to use the spry accordian widget BUT it's inopportune. I quote from different contributions of the forum: "Spry has been deprecated and is no longer officially supported by Adobe", “Adobe abandoned Spry late last year after CS6 came out. Future products will probably not contain any Spry so learning to use jQuery is a valuable skill to have for the future.” So I/we recommend you to switch to a jQuery library for your further requirements."
You may have a look here: http://www.dynamicdrive.com/dynamicindex17/ddaccordionmenu.htm, where you will find a wide range of different menus.
On the other hand - to become closer with your problem - you could send us the link to your website in question.
Hans-Günter

Problem with Adobe Aplication Manger/Updater cs5

i have just installed my CS5 Premium on my new (purchased used) macbook pro after a clean install (OSX 10.8.5)
All the programs works fine but the Aplication Manger say there is updates for all the programs so i open it and and start the updates
it downloads as it shud (according to the progress bar) but when i shud install the updates it gives me the following error messages:
The following updates where unable to install. If you whiz to install these updates, pleas fix the problems below an retry:
Adobe Bridge CS5 4.0.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later.
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe® InDesign® CS5 7.0.4 update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
Fireworks CS5 11.0.2 Update
There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.
I have tryde quitting and tryde again several times with no luck
Anny ideers on how to fix this ?

My Application Manager says somthing else. It's downloading the updates but then the installation fails. Normaly I can live without the upgrades, but my Camera RAW format is not compatible with the old version of Cameraw Raw and I realy need ad least this one.

Problem with IN OUT Number, OUT RefCursor for EF Model StoredProcedure call

When I call a stored procedure using the EF Model and implicit binding via App.config which has three parameters i.e. 'IN Number', 'IN OUT Number' and 'OUT sys_refcursor', the 'IN OUT Number' is not set correctly on return from the procedure.
The 'IN OUT Number' is for an error code and is set to 12345 on input and is then set to 54321 by stored proceedure for return.
The correct value is returned when the call is via OracleCommand using implicit binding via App.config but remains unchanged when the call is via EF Model and implicit binding via App.config.
The ODP documentaion says you cannot have two OUT RefCursors when using EF Model but does not say you cannot have OUT RefCursor and other non-RefCursor OUT parameters.
The idea behind this type of procedure is to have multiple input parameters to configure and filter the stored procedure and an output result set that consists of an error code and a collection of result rows in a RefCursor.
I am using 11g R2 database and ODP 11g Release 2 (11.2.0.2.30) and ODAC Entity Framework beta.
The query uses Scott/tiger schema with parameters department code, error code and list of employees for department.
code:
PROCEDURE TEST_PARAMETERS
DEPT IN NUMBER,
ERROR_CODE IN OUT NUMBER,
DEPT_EMPLOYEES OUT sys_refcursor
AS
BEGIN
DBMS_OUTPUT.PUT_LINE('DEPT = [' || DEPT || ']');
DBMS_OUTPUT.PUT_LINE('ERROR_CODE = [' || ERROR_CODE || ']');
OPEN DEPT_EMPLOYEES for SELECT empno, ename from emp where deptno = DEPT;
-- set ERROR_CODE for return
ERROR_CODE := 54321;
END TEST_PARAMETERS;
The App.config for implicit RefCursor binding is as follows ...
<oracle.dataaccess.client>
<settings>
<add name="SCOTT.TEST_PARAMETERS.RefCursor.DEPT_EMPLOYEES"
value="implicitRefCursor bindinfo='mode=Output'" />
<add name="SCOTT.TEST_PARAMETERS.RefCursorMetaData.DEPT_EMPLOYEES.Column.0"
value="implicitRefCursor metadata='ColumnName=EMPNO;
          BaseColumnName=EMPNO;BaseSchemaName=SCOTT;BaseTableName=EMP;
          NATIVE_DATA_TYPE=number;ProviderType=Int32;
          PROVIDER_DB_TYPE=Int32;DataType=System.Int32;
          ColumnSize=4;NumericPrecision=10;
               NumericScale=3;AllowDBNull=false;IsKey=true'" />
<add name="SCOTT.TEST_PARAMETERS.RefCursorMetaData.DEPT_EMPLOYEES.Column.1"
value="implicitRefCursor metadata='ColumnName=ENAME;
          BaseColumnName=ENAME;BaseSchemaName=SCOTT;BaseTableName=EMP;
          NATIVE_DATA_TYPE=varchar2;ProviderType=Varchar2;
          PROVIDER_DB_TYPE=String;DataType=System.String;
          ColumnSize=10;AllowDBNull=true'" />
</settings>
</oracle.dataaccess.client>
When the call is via OracleCommand both outputs are correct i.e. ERROR_CODE gets set to 54321 and the correct emplyees for department 10 are returned
code:
private void TestParametersViaOracleCommand()
try
string constr = "DATA SOURCE=ORCL;PASSWORD=tiger;PERSIST SECURITY INFO=True;USER ID=SCOTT";
OracleConnection con = new OracleConnection(constr);
con.Open();
OracleCommand cmd = con.CreateCommand();
OracleDataAdapter adapter = new OracleDataAdapter(cmd);
DataSet ds = new DataSet();
cmd = con.CreateCommand();
cmd.CommandText = "SCOTT.TEST_PARAMETERS";
cmd.CommandType = CommandType.StoredProcedure;
cmd.BindByName = true;
OracleParameter dept = cmd.Parameters.Add("DEPT",
OracleDbType.Int32,
ParameterDirection.Input);
dept.Value = 10;
OracleParameter errorCode = cmd.Parameters.Add("ERROR_CODE",
OracleDbType.Int32,
ParameterDirection.InputOutput);
errorCode.Value = 12345;
// RefCursor output parameter implicitly bound via App.Config
adapter = new OracleDataAdapter(cmd);
adapter.Fill(ds);
// should be 54321 and is ...
Console.WriteLine("after call errorCode.Value = " + errorCode.Value);
Console.WriteLine("list size = {0}", ds.Tables[0].Rows.Count);
// only one table
DataTable deptEmployeesTable = ds.Tables[0];
for (int ii = 0; ii < deptEmployeesTable.Rows.Count; ++ii)
DataRow row = deptEmployeesTable.Rows[ii];
Console.WriteLine("EMPNO: " + row[0] + "; ENAME: " + row[1]);
catch (Exception ex)
// Output the message
Console.WriteLine(ex.Message);
if (ex.InnerException != null)
// If any details are available regarding
// errors in the app.config, print them out
Console.WriteLine(ex.InnerException.Message);
if (ex.InnerException.InnerException != null)
Console.WriteLine(
ex.InnerException.InnerException.Message);
output:
before call errorCode.Value = 12345
after call errorCode.Value = 54321 (should be 54321!)
list size = 3
EMPNO: 7782; ENAME: CLARK
EMPNO: 7839; ENAME: KING
EMPNO: 7934; ENAME: MILLER
However when call is via EF Model the correct employees are returned but the ERROR_CODE parameter is unchanged on return.
code:
private void TestParametersViaEFModel()
var context = new ScottEntities();
Decimal dept = 10;
ObjectParameter errorCodeParameter = new ObjectParameter("ERROR_CODE", typeof(decimal));
errorCodeParameter.Value = 12345;
Console.WriteLine("before call errorCodeParameter.Value = " + errorCodeParameter.Value);
// RefCursor output parameter implicitly bound via App.Config
var queryResult = context.TestParameters(dept, errorCodeParameter);
// should be 54321 and is ...
Console.WriteLine("after call errorCodeParameter.Value = " + errorCodeParameter.Value + " (should be 54321!)");
List<TestParameters_Result> deptEmployeesList = queryResult.ToList();
Console.WriteLine("list size = {0}", deptEmployeesList.Count);
for (int ii = 0; ii < deptEmployeesList.Count; ++ii)
TestParameters_Result result = deptEmployeesList[ii];
Console.WriteLine("EMPNO: " + result.EMPNO + "; ENAME: " + result.ENAME);
output:
after call errorCodeParameter.Value = 12345 (should be 54321!)
list size = 3
EMPNO: 7782; ENAME: CLARK
EMPNO: 7839; ENAME: KING
EMPNO: 7934; ENAME: MILLER
errorCodeParameter.Value IS NOT CORRECTLY RETURNED!
If there is no RefCursor then both outputs are identical i.e. the parameters are being passed in correctly and the problem is not with the 'IN OUT' parameter. Also same thing is true if ERROR_CODE is made an OUT parameter. Also tried changing the position of the parameter in the list but still get same problem i.e. works when OracleCommand but not when EF Model. Also note that the RefCursor results are correct for both types of call i.e. it is just a problem with the value of the 'IN OUT ERROR_CODE' parameter.
I have also enabled debug stepping from Visual Studio 2010 into Oracle PL/SQL as described in
"http://st-curriculum.oracle.com/obe/db/hol08/dotnet/debugging/debugging_otn.htm"
and have verified by inspection that the correct values are being passed into the stored procedure and that the stored procedure is definitely setting the ERROR_CODE to 54321 prior to return.
Most of our stored procedures have these type of parameters i.e. several IN params to configure the work of the stored procedure, an OUT NUMBER parameter for the Error_Code if any and a RefCursor for the result list.
Is this a bug or a feature? Am I doing something wrong?

Just to clarify ....
If the ERROR_CODE parameter is made an 'OUT' parameter instead of an 'IN OUT' parameter the correct return value is given for the OracleCommand invocation but the WRONG value is still returned for the EF Model invocation i.e. just changing the parameter from 'IN OUT' to just 'OUT' does not fix the problem.

Problem with Text tool in Photoshop CS5

I just purchased PCS5 this morning and they told me that I should download the trial version till I get the actual CDs... I have Photoshop CS4 and never had any serious problems. After downloading and installing CS5 it seems everything is working ok... however there are 2 problems...
1. It does not interact with Bridge 4 (when I make changes in Bridge, CS5 does not see it)
2. Any time I try to click on 'TEXT' tool icon, the application crushes... and I cant do anything... I have to restart the application.
Dont care much about 1st problem, but can't do without the 2nd one....
Any ideas?
Thanks a million in advance

Hi
Have you tried following solutions?
- update Photoshop to 12.0.4
- remove bad & duplicated fonts and clear system font caches
- update or uninstall 3rd party font management application
- remove all 3rd party plugins including font management application plugin
- launch Photoshop 32bit mode
- upgrade your Mac OS
If above solutions don't help, please contact me ([email protected]).
Thanks,
Kyoko

Problem with TV out, only audio, no video

I has just bought a new ipod video 30GB and I also bought a A/V cable
of apple. But when I connect to my television. Only hear audio from
television but no video.
I tried a lot of ways as folows:
+ video setting : changed TV out --> ON
+ I tried restone ipod to factory condition
+ I tried to change the position of 3 connectors (Yellow,Red, Whitle)
of A/V cable (according to standard, Yellow is video connector).
+ I tried some tips from Discussion Techniques from Apple Forum
But I still can't see video, just hear audio from Television.
What's problem?
I think Ipod only send the audio signal, not video signal.
Can you help me to solve this problem?
Thank you very much.

As well I had the same problem with my i-pod and the one of my wife. The solution was simple:
config: i-pod 60Gb; i-pod 30Gb
cable: no name audio/video A/V cable
TV-out: select ask (not on!!!)
cable into TV: white on white
yellow on red
red on yellow
There are no problems with bad video quality if volume is high, just working fine
What may be the problem: I think, the automatic detect (if you put your setting for TV-out on your i-pod to on) is not working. As well as using only headphones there must be an electronic cirquit detection; means with no Apple stuff just not working. As well there are the yellow and red cable changed; means white and yellow have audio; red video.
Working so for video and diashow on my pod each time I´ve to select TV-Out manually starting video or Dia Show. In that moment both applications are starting in small windows, not in Full Screen mode on the pod.
The order to connect TV or i-pod doesn´t matter; it´s just the manual setting the i-pod for TV-out.
I hope, the info can help you.
i-pod 60Gb Windows XP Pro

Problem with dial out

I have a SPA2002 adapter which I use with an asterisk server. On the asterisk I have configured call forwarding that can be enabled by dialing *21*number#. The problem is that the linksys adapter won't let me dial *21, it immediately gives a busy tone, I guess because it tries to process it as a service itself. How can I configure the adapter to dial out with *21*? I have tried to alter different parameters of the adapter configuration, but without luck.

You're mixing up two things.. there's the asterisk as in one of the button on your phone, and then there's the asterisk as in your PBX.
hwittenb was refering to the button on the phone.. your phone dialplan needs to allow dialling stuff like "*21*" - so if you can post the dialplan on your phone, we can see if it indeed allows that number to be dialled. I'm guessing it doesn't since the call never gets to your PBX.
There are two essential pieces to tracking down a problem with your VoIP equipment:
The configuration of every device involved
SIP protocol traces
And don't forget: there's no such thing as giving too much information when describing a problem.

Problems with user out of OS administrator group

Hi!
I have the following problem. I did an installation of several clients that point to a server, several months ago. The clients work with Windows 200 Professional. The installation in each client was made with a Windows user that has administrator privileges. I had no problems with the clients working with this user and they have been working up to now. But, when I try to take the OS user out of the ADMINISTRATOR group and into the groups USER or RESTRICTED USER, nothing works. I can't do anything that involves oracle and I get the following errors:
- When I try to connect to my application, it says:
Initialization error
Could not load "C:\oracle\ora92\bin\oci.dll"
OracleHomeKey : SOFTWARE\ORACLE\HOME0
OracleHomeDir: C:\oracle\ora92
Found: oci.dll
Using: C:\oracle\ora92\bin\oci.dll
Loadlibrary (c:\oracle\ora92\bin\oci.dll) returned 0
- When I try to start the HTTP Server, the following error appears:
Permision Denied. Could not open document config file c:\oracle\ora92\apache\apache\conf\httpd.conf
Why?, whats happening?. Is there any special privilege that must be given to my non-administrator user?.
Does it have to be in the Administrator Group necessarily?.I don't think so, but I don't know the solution. Any ideas?
Thanks a lot

It is probably a file system permissions issue. Try granting whichever users or roles need the Oracle client read/execute access on the %ORACLE_HOME% directory and subdirectories.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Possible problems with Check out and Open Component and delayed publishing

Hi,
I've experienced some seemingly wrong behaviors of the checkout and open component and also with the delayed publishing feature, I've listed it down :
1) The all important one:
We know we've delayed publishing features for content, if we set the Release Date metadata at a future date, the content will not be released immediately, but do we have a delayed publishing features for a website page. Through manage website the user can add / delete a page(section), may do include or exclude from navigation etc.. but can they set a future date when a particular page can be included in or excluded from navigation? This should be a standard feature for a WCM solution and I hope there is some solution for sure.
2) Can we set a datefield with a calendar feature as a page custom (section) property?
3) Again the issue with checkout and open component, only the user with admin privilege seems to be able to change the content, normal contributors cannot, cause every time is tries to check in with the old author name, so the user has to have admin privilege to assign a different doc author's name. No trace also who is making the changes.
4) Also facing a lot of problems while trying to implement when we use this checkout and open component. As we cannot check who is making the change there is to way to set us a step for self review, also user can only approve or reject but cannot edit the doc before passing it to the next step, if the step user is created using tokens then only checking out of the doc takes it pass the step user, but everything is working perfect with contributor data file. No problem whatsoever. Even if we use manual check out and then check in (i mean without using checkout and open component) this is working fine. But the main problem with non-technical users will be they would not like the content server portal at all and they would always prefer ms word over anything else. They would directly like to double-click on the website page, the word doc will pop up and they would make change and save.
Issue 1 and 4 are killer issues for us, I need your help to find a solution. I have few more issues that i will post later.
Regards,
Nirmalya
vijayr: Are u Vijay Ramanathan? Product Manager, Oracle UCM, u r my mentor sir.

Hey Shotdawq,
I was a bit low on bandwidth, so could not visit the forum any sooner.DIS is dynamic integration studio, it works on the webdav protocol.
you will need to install DIS on the client machines. The POC that i did was integration of SiteStudio with CheckOutAndOpenInNative.
I am also planning to referenc this functionality from WebSphere, what i have in my mind is to copy the java script from my sitestudio page and paste
it in the JSP, and then using the CIS or RIDC will execute the serverices. At present i am stuck in some other work, If i get this thing working i will
update you. In the meanwhile if you have some question for me, feel free to throw them.
cheers,
sapan

Problem with fading out particles in cs5

Similar Messages

Maybe you are looking for