Problem with fan noise and battery on g510

I bought an new lenovo g510 ( core i5 4200m and amd r5-m230 ) from 3 days
and notice that fan has a noise most of the time and when i check the battery wear level on hwmonitor it is has 1 % wear level so why i got these problem and my laptop is bought from just 3 days !!!!!!

Hey. Really sorry for late answer. i got same model (but i7 , r7 m265 )
For the fan noise ; check out gpu and cpu temperatures . clean the fan dust with power manager program. and update drivers.
for the battery , %1 wear is nothing . only affects 1-2 mins . battery has internal smbus battery fuel gauge and it automatically calibrates battery full charge capacity. but you can manual calibrate fcc with power manager. we are very lucky because on some hp ,samsung etc laptops , battery comes with %10 wearage (like my old laptop).
you post this message 6 months ago. if your battery wear is >%15 now , send battery to service. they will replace a new battery. if battery wear <%10 , your battery is normal

Similar Messages

Does Lion 10.7.1 fix problems with fan noise and hot in Air 2008 Model?

Does Lion 10.7.1 fix problems with fan noise and hot in Air 2008 Model?
I´ve installed a week ago but i downgraded to SL again. My CPU was hotter and high rpm fan eve in idle state.
Does fix 10.7.1 this issues?
I´ve got first generation macbook air, 2gb ram, ssd 60gb .

Simply NO, we´re still waiting....

Problem with fan, temperature and battery after the restore from the stop (Macbook pro 15)

From a couple of weeks my macbook pro (15" 2.4 Ghz i7 4gb OS X 10.7.4) has this problem: when i close the screen it goes to stop and when i open it goes out the stop normaly but the fan and the temperature increase and the battery last nothing. So i reboot the mac and everithings go to normal way and also battery time increase in comparison with before...

I've found that samsung kies wifi started at the login and that the app used 91% of my cpu and filled up my ram so i went to: system preference > users and groups > login's elements > and i deleted the app from the list.

Problem with clicking noise and using hdapm

I'm having a problem with my 2009 17" MacBook Pro, with Lion. I installed a new, larger hard drive, and ever since then a tinny clicking noise has been emanating from the laptop. I tried to install hdapm, and I am able to successfully download the .dmg file and mount the disk image. However, at this point, all I see is a .pkg file. I clicked to install the program, abd then added the command to Lingon to execute 'hdapm disk0 max' upon startup. However, Console said that it failed to execute this command. I tried entering it directly on Terminal, and still no luck. It should be compatible with my hard drive, but I'm not sure what I'm doing wrong. From what I've gathered, there should be another file in the original disk image that I can move into my Applications folder; however, I could not find it anywhere. Does anyone have any suggestions about how to resolve this issue? Thanks!

This is not a disk failure problem, regardless of how there are disk failure modes that act like this. It is a hard disk firmware situation that conflicts with OS hd controllers. It is a problem that comes and goes, or gets less of a problem or more of a problem depending on OS upgrades. Although I have it happening with a Seagate drive, it is reported on Western Digital drives.
It is also not only exclusively a Mac hardware problem or software problem. There are comments on Dell's forums, and even a Seagate firmware upgrade (which I fear to do.) There are also solutions where people boot to Unix, do the fix there, then reboot to Mac and it disappears and stays disappeared.
==>> N.B. – In Lion and the last couple versions of SL, you need to place a 'sudo' in front of the 'hdapm disk0 max'. Then it will work...for a while...maybe.
I have modified versions of the airport plist in the past from 'always on' to 'when needed' and that helps until the OS changes something. Then the same 'fix' won't make the constant head parking stop.
Different combinations of programs will start it up. Sometimes just getting the head busy for a while, like playing songs on iTunes, will stop it and upon closing iTunes will continue to keep it off. (Playing songs with a lot of percussion will not disguise the problem since by the time you try that you will be sensitized to hear the sound even when it is -96dB from ambient.)
A new variation with Lion has been to get the click going a couple minutes !!!after!!! putting the system to sleep! In fact, this problem has never been so uncontrollable as with Lion.
...and that is why I am back searching the forums to see if anyone has an up-to-date solution.

Problems with 8220 WiFi and battery

I'm not sure if these 2 problems are related. I've had a 8220 for 11 months and notice my battery life has really deteriorated the last few days. at the same time accessing WiFi from my phone is not as reliable. I know there is no problem with my Wifi as I have no problem accessing it from my laptop from the same connection.
Is this problem related to my battery? or are there other ways to improve WiFi connections from my 8220.
thanks

I had exactly the same problem with WiFi calls (see my old posts on dropped calls). I tested my phone in another WiFi location (in a coffee shop) and didn't have problems. Even though my computer recognized the signal, my phone dropped the calls. I changed my router and verified that all phones jacks (except the router) were using DSL filters. Since then, the problem disappeared (except when I synch music).
When outside, the phone will periodically drop calls moving between WiFi and edge networks. However, I usually turn off the WiFi network anyway to conserve batteries. While at home, the WiFi connection is more reliable if I turn off the edge network so the phone stays on WiFi and doesn't look for another network. By default, I set my preferences to WiFi at home, so even if I forget to turn off the edge network, it still looks for WiFi.

HP Probook 6540b problem with fan speed and sound card

Hi.
Sorry for my English.
I have installed Arch 32bit on probook 6540b (it has core i5 processor). Cpufrequtils works well - with governor set on ondemand frequency is adjusting correctly but fun is running max speed all the time. I have tried to configure lm_sensors but it doesn`t detect any sensors. Also fun folder in acpi is empty. It would be great if You could help me.
Thanks for any advice.
...ergh
Fan sometimes works slow so maybe its overheating problem.
But
I have another problem with sound on this laptop. I have IDT 92HD75B3X5 sound chip and snd-hda-intel module loaded for it but it doesn`t make any sound. In Amarok it looks like something is playing because progress bar is moving. I have tried everything from arch wiki and other sources but nothing works. Maybe You can help?
Thanks
Last edited by zennon (2010-08-22 08:57:07)

Hi. Yes. I also tried all tricks with model etc. and nothing. Now I have installed oss and have some progress. I have sound on pcm2 when I run osstest, no sound on pcm1 (but it looks in test like it plays something) and input/output errors from pcm3 to pcm7. I have oss output in multimedia in kde and when I run test I can see moving strips or something (I dont know the word for it ) in ossxmix but I hear nothing. I I tried all configurations in ossxmix and nothing.
Last edited by zennon (2010-08-23 12:37:23)

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board.

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.

Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa

Hello, I have a problem with my iphone 4 battery, it looses 20% over the night with wifi on and without receiving any phone call or notification. It also uses 1 or 2% each time I check my iphone even if it is just to check up my messages. Is it normal?

Hello, I have a problem with my iphone 4 battery, it looses 20% over the night with wifi on and without receiving any phone call or notification. It also uses 1 or 2% each time I check my iphone even if it is just to check up my messages. Is it normal? Please someone give me a solution

Yes this is fairly normal. When you have wifi on the phone, it drains the battery life of the device.
Here is an article that has some tips that you can follow so you can modify the settings on your device to extend it's battery life to the fullest.
http://www.apple.com/batteries/iphone.html

HT4060 I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual

I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.

Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout

T430s fan noise and fan speed monitor not working?

Hi, I just bought this T430s from the outlet store. I noticed a rather loud fan noise and found out s lot of compalints about the T430 model. I guess the problem I have is not as severe as those T430 users (e.g. the noise may not be as loud), but I still want to monitor the fan speed. Here's my problem:
1. none of the third party software can show fan speed, they can only show the cpu temperature, such as speedfan and aida64.
2. I tried to download the fanspeedcontrol driver from lenovo, but after installing it, the task manager does not show that the fanspeedcontrol exe. is working.
I do not want to change the fan speed, but just want to monitor the speed so that I can have a better understanding of whats going on. Does anyone have the similar problem?
Thanks.

Hi Alan, (I know this conversation was from several months back),
I don't know the answer to your questions. It seems that your fan is operational, as far as its most basic functional requirement.
I don't have experience with any particular software programs or widgets that indicate fan speed, sorry.
Do you have any view, through software, of the CPU (and GPU?) sensed temperature? Those would be very good data to observe.
If it were either disconnected or non-functional, I assume that your computer would report a POST error right after power-on (and self test).
But I just wanted to suggest here that in an unfortunate possible scenario, consider if the thermal grease on the heat sink(s) was inadequate (or was missing), then the fan would be running higher than normal (probably always spinning at a high rate), and it won't be taking enough heat away from the processor(s), i.e. inadequate cooling.
Which could be corrected by a technician (or DIY). This is pure speculation, it is not a definite, at all.
Larry

Problem with my iPhone 4s battery/charge.

Hi all,
I have a problem with my Iphone 4s battery / charge. I read through different forums and blogs and I found that some other users has my same problem.
My phone is loosing charge faster than anytime before. All started two weeks ago, before iOs 6.1.3 release. I use to charge the phone up to 100% every night. One mornign, i switched on the phone and I could no hear the typical sound of the screen unlocked. In addition the keyboard made no sound. I tried to control the volume with the side buttons, but once I pressed one of the two, nothing appeared under the speaker / sound logo. I left the phone just for a while and then the sound was back on. From that day till today, this thing is happening everytime i switched on the phone after a recharge.
PLUS, I noticed that the phone is loosing the charge very fast. About 10% every hour, even in stand by mode.
I tried to switch off all the email account and do and hard reset, but nothing changed.
I bought the phone 10 months ago.
What I have to do?
Many thanks
Niko

I would like to know the answer to that one. I realized this was happening just after upgradeing my iOS to 6. Then when I looked up my purchase date, I was about 5 days past my one year warranty. So I'm dead in the water. Apple will replace the battery, but it will be about $80+. I took it to the Apple store, and they checked a bunch of stuff, but said that it seemed ok. I'm debating getting a battery for a more reasonable price off of ebay. But if it's the iOS thats draining the battery, then I'm not going to be able to help it. I wish I knew a better way to tell if its the battery, the phone, or the iOS.

Macbook fan noise and heat

Hi .Help
Excessive fan noise and heat during use: Safari, or watching movies, etc.
15-inch MacBook Pro with Rtina Display 2013 OS X 10.9.2

Problem with active noise cancellation function : ...

My nokia 6720 have problem with active noise cancellation function. It seem not working because it also have noise when this function is active. So, I try to disable this function and found that the noise is reduce (but still not clear). How do I correct this problem?
Thanks.
P.S. Firmware version is 012.008

"I must must achive a segnificant attenuation of the noise in a closed volume using some NI devices ..."
At first glance I would say "probably can be done using an FPGA as a target" since the FPGA can close a very fast loop.
But to do that with a microphone input on a PC running Windows...
I suspect that would be an exercise in futility.
Anyone out there been able to turn around a microphone input fast enough to something like this?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Problem with both user and cmos password

I have problem with my user and cmos password, can formating clear the passward with remove the cmos battary.

It depends on the model. Formatting will not touch the BIOS or power on passwords but will take away the Windows user password and allow you to have a different one, but will kill all the data on the machine. Removing the CMOS battery might clear the BIOS password and power on password, but on most current laptops even that will not help. The BIOS data is on a chip that holds its contents even when all power is removed.

Toshiba sattelite pro ( SPM30 ) problem with black screen and white cursor

I have a toshiba SPM30 from a friend and I couldn't succed to resolve the problem with black screen and white cursor.I can enter in bios using F2 and I can use F12 but is not booting, I have some CD and DVD with Win Xp but it seeams that is not booting.I've traied to change the order in boot order: first CD/DVD and after HDD but still is not working...I saw that a HDD I can see details about it but at CD/DVD I can't see...I think that the CD/DVD is not working( but I can see the light and hear the sounds when I put a bootable CD or DVD)...Please, if someoane can help me......( byt the way I've traied to remove the bios battery and still is not working...)

Try f8 and try the repair your computer options
This explains advanced start up options:
http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-...
This explains start up repair:
http://windows.microsoft.com/en-us/windows/startup-repair-faq#1TC=windows-7
A system disc can be used for these repair options also, in your case if the DVD drive is not working you can use an external dvd drive if you have one.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Problem with fan noise and battery on g510

Similar Messages

Maybe you are looking for