Problem with fan, temperature and battery after the restore from the stop (Macbook pro 15)
From a couple of weeks my macbook pro (15" 2.4 Ghz i7 4gb OS X 10.7.4) has this problem: when i close the screen it goes to stop and when i open it goes out the stop normaly but the fan and the temperature increase and the battery last nothing. So i reboot the mac and everithings go to normal way and also battery time increase in comparison with before...
I've found that samsung kies wifi started at the login and that the app used 91% of my cpu and filled up my ram so i went to: system preference > users and groups > login's elements > and i deleted the app from the list.
Similar Messages
-
Problem with fan noise and battery on g510
I bought an new lenovo g510 ( core i5 4200m and amd r5-m230 ) from 3 days
and notice that fan has a noise most of the time and when i check the battery wear level on hwmonitor it is has 1 % wear level so why i got these problem and my laptop is bought from just 3 days !!!!!!Hey. Really sorry for late answer. i got same model (but i7 , r7 m265 )
For the fan noise ; check out gpu and cpu temperatures . clean the fan dust with power manager program. and update drivers.
for the battery , %1 wear is nothing . only affects 1-2 mins . battery has internal smbus battery fuel gauge and it automatically calibrates battery full charge capacity. but you can manual calibrate fcc with power manager. we are very lucky because on some hp ,samsung etc laptops , battery comes with %10 wearage (like my old laptop).
you post this message 6 months ago. if your battery wear is >%15 now , send battery to service. they will replace a new battery. if battery wear <%10 , your battery is normal -
Hello, I have a problem with my iphone 4 battery, it looses 20% over the night with wifi on and without receiving any phone call or notification. It also uses 1 or 2% each time I check my iphone even if it is just to check up my messages. Is it normal? Please someone give me a solution
Yes this is fairly normal. When you have wifi on the phone, it drains the battery life of the device.
Here is an article that has some tips that you can follow so you can modify the settings on your device to extend it's battery life to the fullest.
http://www.apple.com/batteries/iphone.html -
So my itunes says that there is a problem with my itunes and i have to restore it but i have purchased ne songs through itunes on my ipod not through the computer so of course i would have to transfer purchases on my ipod to the computer before i restore it so it does not delete everyting and then i cant back them up. So i went to transfer purchases and It wouldent let me. So how do i transfer my purchases before i restore my ipod so i can back it uup so i dont lose everything. Thanks
There is a backup plan after doing the Restore. Read this.
-
Does Lion 10.7.1 fix problems with fan noise and hot in Air 2008 Model?
Does Lion 10.7.1 fix problems with fan noise and hot in Air 2008 Model?
I´ve installed a week ago but i downgraded to SL again. My CPU was hotter and high rpm fan eve in idle state.
Does fix 10.7.1 this issues?
I´ve got first generation macbook air, 2gb ram, ssd 60gb .Simply NO, we´re still waiting....
-
I am having a problem with very slow start up after expanding RAM on my 2009 Mac Pro.
I am having a problem with very slow start up after expanding RAM on my 2009 Mac Pro (8 Core 2.93GHz). When I run the Mac Pro with 2 x 2Gb RAM it takes 4 seconds before the gray screen, chime and spinning wheel appear.However when I expand the RAM to 20GB the grey screen and chimes appear after a long 20+ second black screen.
The RAM modules are paored 2 x 4GB Crucial CT51272BA1339.M18FMR and 6 x 2GB SAMSUNG M391B5673FH0-CH9, all DDR3 ECC.
Reading articles on the internet, I thought it may be damaged RAM modules, but I have completed memtest and all are okay. I have tried changing the pairs around and if I use any paired 2 modules the Mac Pro starts normally, only when I try running more than 2 modules the delayed start up happens. (black screen 20 Seconds)
I also have tried PRAM and SMU resets after changing the RAM setups, and the issues always occurs when I have more than 2 modules. As you can see I have 6 SAMSUNG modules and even with identical modules the issue happens, when increasing the RAM to more than 2 modules.
The Mac Pro runs fine after the start up screen and can see all the modules, but has anyone else come across this issue, or have any ideas as to why my Mac Pro is taking 20 seconds to start up with 20 GB RAM?Hi there. Thanks for your comments.
I have tried all the different combinations of RAM setup, and as stated in my initial topic, the Mac Pro boot up time only slows when I have more that 2 modules. Where I place these does not seem to make a difference.
I have taken the Mac Pro to an Apple Reseller technician yesterday and they where not able to find any RAM errors. Apparently the boot up time is within Apple's acceptable parameters for this set up.
Could anyone that is running a Mac Pro 2009 with more that 4 modules of RAM, please let me know if the boot up time is normal. ( the time it takes from pressing the power button to seeing the gray screen around 16 - 20 seconds)
Or is anyone else having the same issues?
thanks for your responce -
I have a problem with my itunes. I cannot transfer apps from the itunes to my iphone 4s. Any time I try to snyc itunes tells me "The iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone. To authorize this computer for items purchased from the itunes store, choose, Store > Authorize This Computer. But anytime I authorize it tells me you have authorized including this computer 2 out 5 computers. And if I try again the same story over and over again. But I have many apps on my itunes which I want to transfer. Please someone help me.
Well Authorize the Computer...........
-
i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version. Any solution?
This from the crash log
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/Accounts.framework/Versions/A/Accounts
Referenced from: /System/Library/StagedFrameworks/Safari/Safari.framework/Safari
indicates there is a missing library on your system. What problems were you having before that caused you to delete Safari? How did you delete it?
You're best bet in this case is to re-install the OS. While doing a re-install will not normally harm your user data having a good working backup in cases like this is essential. -
TS1702 Having problems with Security questions to be able to download from the iTunes store
Having problems with Security questions to be able to download from the iTunes store
Security questions
Read this note for information on how to reset the security questions http://support.apple.com/kb/HT5312
This user tip may also help you Security Questions -
I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?
It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere. -
No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions' in Disk Utility ??......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..I'll try this every 2/3 wks and always get repairs.....yet, I don't really have issues....it's been weird.......it continues with 10.7 and the update to 10.7.1.. a sample:
Permissions differ on “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”
Group differs on “Library/Preferences/com.apple.alf.plist”; should be 80; group is 0.
Repaired “Library/Preferences/com.apple.alf.plist”
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.As described in this article, don't worry about it:
http://support.apple.com/kb/TS1448?viewlocale=en_US -
Problems with Mail, Safari and iTunes after updating to 10.5.6
Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
MichaelFirst, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop. -
Problem with black screen and crashes after installing windows 7 and bootcamp
K, so I partitioned my internal HD using Bootcamp, installed a new copy of Windows 7 Home, put in my Mac OSX disk and installed the additional stuff. I can successfully log in to Windows and open the browsers I have installed: Comodo dragon and Mozilla FF. McAfee auto installed with FF and I have Comodo Antivirus installed.
However, within minutes of use, my screen goes black, the computer does not shut down and reboot, I have to press the power button and wait a few secs for it to shut down then reboot. This has happened from both browsers while in Windows on Facebook in a game; while trying to save an attachment from an email via webmail and also while checking the inbuilt Windows settings for the display.
The latter produced the following report (below) on reboot and when I hit the "look for a solution" button, the actual window vanished after a few secs.
2 additional bits of info which may or may not be related:
a) running windows troubleshooter I discovered I have prob with:
driver for Inter (r) 5 series /3400 series chipset Family USB Universal Host Contoller - 3B3B
- I Googled this and it seems a common prob. Tried the reinstall, didn't work, so disabled it as suggested on some of the forum posts.
b) The OSX side of my computer seems to run fine most of the time, tho I have had the odd back screen, then wait, press reboot to power on and off in past as related in this post last month: https://discussions.apple.com/thread/4844797 (maybe a kernal panic..???)
Would anyone know what is causing these probs or what I can do about them? My computer is no longer under warranty and the couple of times I had probs while it was, I was told the probs were to do with the power supply and given a new one, I'm not sure if they looked at the logic board. The OSX side has also had an ongoing prob to do with sudden shrinkage of the image content, which I mentioned to the geniuses at the Apple store b4, but as it wasn't acting up there they couldn't do anything about it... ( looks as tho sm1 changed the screen resolution and whatever is in the browser window shrinks, tho desktop, is never effected - if that makes sense!.)
All in all tho, does make me wonder if the prob is based in the graphics switching..???
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057 Additional information about the problem:
BCCode: 333
BCP1: 0000000000000001
BCP2: 0000000000000002
BCP3: 0000000000000003
BCP4: 0000000000000004
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1 Files that help describe the problem:
C:\Windows\Minidump\032413-20872-01.dmp
C:\Users\KittyH\AppData\Local\Temp\WER-166952-0.sysdata.xml Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtWhen booting up hold down the option key and pick the Mac startup disk. To make it automatic, once in your Mac side go to preferences, startup disk and pick the Mac disk. Next time you boot up it will boot up to Mac OS.
-
Problems with 8220 WiFi and battery
I'm not sure if these 2 problems are related. I've had a 8220 for 11 months and notice my battery life has really deteriorated the last few days. at the same time accessing WiFi from my phone is not as reliable. I know there is no problem with my Wifi as I have no problem accessing it from my laptop from the same connection.
Is this problem related to my battery? or are there other ways to improve WiFi connections from my 8220.
thanksI had exactly the same problem with WiFi calls (see my old posts on dropped calls). I tested my phone in another WiFi location (in a coffee shop) and didn't have problems. Even though my computer recognized the signal, my phone dropped the calls. I changed my router and verified that all phones jacks (except the router) were using DSL filters. Since then, the problem disappeared (except when I synch music).
When outside, the phone will periodically drop calls moving between WiFi and edge networks. However, I usually turn off the WiFi network anyway to conserve batteries. While at home, the WiFi connection is more reliable if I turn off the edge network so the phone stays on WiFi and doesn't look for another network. By default, I set my preferences to WiFi at home, so even if I forget to turn off the edge network, it still looks for WiFi. -
HP Probook 6540b problem with fan speed and sound card
Hi.
Sorry for my English.
I have installed Arch 32bit on probook 6540b (it has core i5 processor). Cpufrequtils works well - with governor set on ondemand frequency is adjusting correctly but fun is running max speed all the time. I have tried to configure lm_sensors but it doesn`t detect any sensors. Also fun folder in acpi is empty. It would be great if You could help me.
Thanks for any advice.
...ergh
Fan sometimes works slow so maybe its overheating problem.
But
I have another problem with sound on this laptop. I have IDT 92HD75B3X5 sound chip and snd-hda-intel module loaded for it but it doesn`t make any sound. In Amarok it looks like something is playing because progress bar is moving. I have tried everything from arch wiki and other sources but nothing works. Maybe You can help?
Thanks
Last edited by zennon (2010-08-22 08:57:07)Hi. Yes. I also tried all tricks with model etc. and nothing. Now I have installed oss and have some progress. I have sound on pcm2 when I run osstest, no sound on pcm1 (but it looks in test like it plays something) and input/output errors from pcm3 to pcm7. I have oss output in multimedia in kde and when I run test I can see moving strips or something (I dont know the word for it ) in ossxmix but I hear nothing. I I tried all configurations in ossxmix and nothing.
Last edited by zennon (2010-08-23 12:37:23)
Maybe you are looking for
-
I am attempting to upload a manually edited WADConfig xml to my VM. The WAD service is functioning correctly, I needed to add some custom WinEventLogs. The prescribed steps result in an error. What am I overlooking? I am following these instructions:
-
Validating Profit Center in CJ20N Transaction
Hi All, My requirement is to lock the Profit Center field(Make it grayed out) in the project using CJ20n transaction once it is created. Also when ever the user is trying to change the profit center by entering the project details, it should give an
-
"not enough free space" msg appearing incorrectly. Unable to properly sync.
I have been searching through the posts and haven't seen one similar to this: Initially, my nano worked wonderfully. Then, around Thanksgiving, anytime I tried to sync it with my laptop, I received an error stating it was too full to sync -- even if
-
Check user and organization in a workflow
Hi all, With a workflow i need to check the existance of a user and a organization. I can do it in the forms but i can't find a method to call in a workflow. I found a method called getObjectIfExists but i can't call it in a workflow. Thank you!
-
SMS appears as a Network Notification message
After loading the 4.5.0 version software in my Blackberry Curve (8310), I am facing a typical problem of my SMS being received as a Network Notification message by the Recipients. With this, in Nokia phones the message prompts for Save or Delete opti