Problem with far away titles

I have set up the far away titles with a photo background, the only problem is that the colour I set for the text are all washed out. If I set the text to black, then it does not appear at all.
I just want the text to appear clear and readable in front of the photo.
Any suggestions??

What color are you using and what color is the background photo?
:)Sue

Similar Messages

IMovie HD 6 Editing with "far, far away" title

Is there any way to slow down the speed of the copy moving up the screen when using the "far, far away" title? The slowest I can get it to go is a 1 minute duration and that is too fast for my purposes.

I also like the mock Star Wars rolling credits, but find the version in iMovie 6 inadequate.
I therefore use an application called (surprise!) 'Rolling Credits' from:
http://www.rqs.ca/
which works a treat, but now costs $19.95!
Message was edited by: Klaus1

The "Far Far Away" title is displaying a white box rather than the entered text. Is there any way to restore the title code so that it works properly?

The "Far Far Away" title (which I have used quite frequently) has stoped working and just displays a white box where the text should be displayed.
Has anyone else experienced this problem or have a suggestion as to a resolution. This is in IMovie '11 Version 9.0.8.

Thanks for the reply Russ.
Yes, I've considered adding titles and/or generators in the FCPX storyline, but this creates a need to render the entire timeline. As I'm juggling library locations and hard drive spaces I just didn't want to add a new render that will occupy a lot of space. It's also a bit of visual clultter for me, so my goal is to find the best workflow for adding this stuff on or after export.

Using Far Far away title, cannot align edges

I am trying to make a nice far far away star wars type title which should look neat and aligned I am trying to create a fairly long title in imovie HD 6 and use the "far far away" title.
I can't get the edges to line up , It looks fine in the window whrere you type but after rendering it looks awful, all out of alignment. I have tried different font sizes, all with the same result! I am using a common font Ariel.
Anyone know how to fix this ?Please help much appreciated!!
Cheers!
cheznoel is online now Report Post Edit/Delete Message

Hi
Don't know BUT
are You aware of that space can be used in two ways ?
• Normal - in end of line it accepts a cut BUT
• [alt+Space] makes most program handle it as a letter eg 20° C will not be cut but
moves over to next line as a whole.
I use alt+Space to force the text to align and so on.
Yours Bengt W

Editing the "Far Far away" title in iMovie

I was wondering is there any way to slow down the word in the "Far Far Away" title with out changing the time of the whole title?

thesurgwithmac wrote:
I was wondering is there any way to slow down the word in the "Far Far Away" title with out changing the time of the whole title?
the 'speed' is determined by 'amount-of-text x length':
lots of words x 3 secs length = speeeedy
few words x 44 secs length = sloooooow

Problem with accent in Title

Hi there,
I'am using Adobe Captivate 6 on a mac, in French.
On each slide I have a Title (area defined in my main slide).
In the Title area, I cannot type accent such ü ö, but é à are working. In other text areas, is it working.
What could I do ? Is it a bug ?
Many thanks for your Help

Yes I tried with antother fonts such as Arial Times New Roman, it is the same.
I experience this also with other placeholders not only title ones, BUT... I found a partial issue.
When I am typing the wanting caracter such as "ü" in the search filed, and then Copy/Paste in my Title Placeholder it works.
I realy think is it a bug.
Regards
tchiboo
Le 30 sept. 2012 à 13:38, Lilybiri <[email protected]> a écrit :
Re: Problem with accent in Title
created by Lilybiri in Adobe Captivate - View the full discussion
Cannot help you, just hope someone of the staff pops in. It seems a bit strange however that this issue is only with the Title placeholders... the Spanish users had similar issues all the time. Did you try to change the font?
Lilybiri
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4738287#4738287
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4738287#4738287
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4738287#4738287. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Captivate by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Premiere Elements 13 , Problems with new text/titles

Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.

High ATR,
Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
Grafikkarte: NVIDIA GeForce 8800 GT
If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
Project settings are the following:
General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
The video is a mixture of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
Thank you for your service.
thomasd
Von: A.T. Romano
Gesendet: Sonntag, 1. Februar 2015 23:55
An: Thomas Deschler
Betreff: Premiere Elements 13 , Problems with new text/titles
Premiere Elements 13 , Problems with new text/titles
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822>

IMovie 13 how do I change the speed of the Far Far Away title scrolling?

How do I change the scrolling speed of the Far Far Away wording?
Thanks in advance!!

Thanks. I did try this and it slowed the scroll down. There is still a residual problem which is there is a certain amount of blank screen at the end. I thought slowing the scroll would fill this dead spot. By lengthening the duration of the title, the scroll is now slower, but the black screen has also lengthened.The current dead time is now the final 6 seconds of a 25 second title. Any help on cutting out the dead scrren time. If this were a straight video clip I would simply trim it away. Any way to get the scrolling text to fill more than 80% of the title duration?

Problem with Date / Time Title - Showing Inacurate Information

I use iMovie to make videos for my job. The videos need to have an accurate running time and date displayed on them. I use the "Date/Time" Title option and the running time and date appear on the video. BUT- there is a problem. The time is wrong.
When I import a video clip (from my Panasonic HDC-TM80) into iMovie, I can see the "time and date created" as well as the "length" of the video clip. The time and date created shows the time and date of when the clip ENDS. When I overlay the "Date/Time" Title, it starts the time (at the beginning of the clip) from the created time (which is actually the end).
Example:
Clip Created (end of clip): 3/23/11 10:30:00am
Length of clip: 12 min. 35 sec.
The actual Date/Time Title should show 10:17:25am at the beginning and runs through 10:30:00am (the end).
But instead it shows 10:30:00am at the beginning and runs through 10:42:35am. This obviously results in a 12 min. 35 sec. inaccuracy.
Is this a problem with the software? Is there a way to contact someone to alert them of this problem? Or am I missing something simple?
Thanks in advance for anyone's help.
-as a quick fix, I adjusted the time and date on the video clips so that it would show the correct info, but I'm usually working with several clips at a time and it is laborious to change each one.

I don't have an answer but was wondering how you like the TM80? Except for the date/time issue, is it compatible with iMovie'11?
Thanks!

Problem with far cry 4 msi afterburner and sli

just wondering if anyone else could verify this for me when ever I try and launch far cry 4 with msi afterburner running and sli the game will crash everytime. disable sli leave msi afterburner running game will launch. enable sli turn off afterburner game will launch.
just trying to figure out if its my system or if this is a common problem thanks in advance

Game crashing could be caused by few problems, could be software or hardware. Assuming we're looking into hardware, I suggest you run MEMTEST for your RAM and see if your RAM is defected. Other than that, I can't think of any reason than power supply. But you stated you have a 480 W which should be sufficient. It could be a known problem with ATI on Far Cry? But if this's the case, ATI should be able to deal with it via Driver Update.
If it's software, this is broad. Does Far Cry have any patch?

Radeon 9700 pro problem with Far Cry game

When I playing far cry at High Deatils, after 5 minutes game will crashing, and i got graphic error message
I have Last update of official ati driver , and i tried OMEGA unofficial driver;
but problem still running.
Sys. Spcs.
Mobo MSI 865 Neo 2 P
CPU P4 3GHz HT
RAM 4x256 dual channel
Graphic Card Radeon 9700 pro 128MB/128Bit
PSU 480 Watt.

Game crashing could be caused by few problems, could be software or hardware. Assuming we're looking into hardware, I suggest you run MEMTEST for your RAM and see if your RAM is defected. Other than that, I can't think of any reason than power supply. But you stated you have a 480 W which should be sufficient. It could be a known problem with ATI on Far Cry? But if this's the case, ATI should be able to deal with it via Driver Update.
If it's software, this is broad. Does Far Cry have any patch?

Problems with Compiz and Title bar,

Hello , i've been trying to setup compiz with arch using the open source drives and i'v gotten it working how ever if i enable the screen decorate it freezes when i start fusion-icon and i have no button or ablity to move the windows in the title bar.
i have a Radeon x1200 series graphics card
also i would like to know how show the drives that are mounted on the desktop
Last edited by livinglifeback (2010-01-06 22:13:30)

So you are using fusion-icon and have Compiz enabled and Emerald set as your window decorator and that's when you run into trouble. Correct me if I'm misunderstanding your problem, but if I'm not it's probably because none of the Compiz plugins are enabled by default. Load the Compiz control center and start enabling some of the plugins. At minimum you need windows, move windows, and plugins like that enabled. Hope that helps.

CS5 export problem with Shakey/Jumpy titles

looks ok fully rendered in adobe premier XS5 but after i export it into an avi the titles are all jumpy/shakey. Any ideas? I saw the same problem was posted and never answered last year so i know im not the only one.
PS- does everybody here use the youtueb presets on premier or do they have their own tweeks? Does my shakeyness havee anythign to do with converting it to an avi? Whats the best advice for a youtuber. thanks

please give us more information about your sequence settings and export settings, framerate of your titles, etc.
only the titles are shaky and the video looks good?
also when you test an export using "match sequence settings" ?

Any common problems with Japanese sub-titles?

Hi one and all,
I have been asked to take on a project involving adding Japanese sub-titles to a series of videos. The translation will be provided (so I will have access to the Japanese text to create the titles), however I have never worked with Japanese Kanji inside of Premiere Pro (7.2.2). Therefore I was just wondering if anybody in the community could let me know if there are any common pitfalls I need to look out for when using non-Roman alphabets in titles?
I have not imported any fonts for this so far. Kanji appears to display fine in the title window when pasted in and it exports fine as well.
Any advice on this would be greatly appreciated before I say 'yes' and then find myself in a world of headaches.
Many Thanks
Josh

Since post lacks information on what you have exactly done it could be useful to reiterate some points.
In GNOME3 IBus should work from the box, provided you installed input method and added it in system settings (I use kkc). GNOME breaks all other input methods except IBus, so that is your porbably best shot.
In other DE (or we should say more generic method) you should set environment variables and start input method daemon. For KDE and MATE (I start X with sddm) I put in .xprofile
export GTK_IM_MODULE=fcitx
export QT_IM_MODULE=fcitx
export XMODIFIERS=@im=fcitx
fcitx -d -r
local/fcitx 4.2.8.5-6 (fcitx-im)
local/fcitx-configtool 0.4.8-1
local/fcitx-gtk2 4.2.8.5-6 (fcitx-im)
local/fcitx-gtk3 4.2.8.5-6 (fcitx-im)
local/fcitx-kkc 0.1.1-1
local/fcitx-qt4 4.2.8.5-6 (fcitx-im)
local/fcitx-qt5 0.1.3-1

Problem with iWeb domain titles

Greetings, I'm hoping someone can help me. I recently replaced my old website with one that I created in iweb. However, as you can see from the screenshot, every page has a redundant and rather unnecessary title tab for the website address. I upload to my host via FTP, and I'm wondering if that has something to do with it. Any help is greatly appreciated. Thanks!
aaron

That is perfectly normal in iWeb and if you want it to change, don't name your site with your domain name within iWeb.
iWeb produces a sitename and you cannot leave this blank so when you publish to a local folder you get your site folder with the same name and the index.html file.
All you need do is to re-name your site in iWeb and then publish to a local folder and just upload that new site folder with the new name. Remember also that iWeb produces two index files, one that sits inside the site folder itself and then the other one that just points in towards the first page of the site and must sit outside the site folder.
This is totally normal in iWeb and is nothing that you have done - just change your site name to something different and more applicable to your site and then you won't get the double domain name.

Problem with far away titles

Similar Messages

Maybe you are looking for