Problem with faux column and min 100% height

hello
i',m trying to create a faux column on this page:
http://www.malcmabe.co.uk/listtest.html.
the column i'm trying to do is the left hand side menu
column.
i just can't get this to work, so i'm obviousley missing
something.
also, i've set the wrapper as minimum height of 100%. this
isn't working, so my hunch is that it's having a knock on effect to
the measurements of the left hand column....but i may be wrong
any help would be appreciated.
the css file is
http://www.malcmabe.co.uk/listtest.css
malc

malcster2 wrote:
> hello
>
> i',m trying to create a faux column on this
> page:
http://www.malcmabe.co.uk/listtest.html.
> the column i'm trying to do is the left hand side menu
column.
>
> i just can't get this to work, so i'm obviousley missing
something.
>
> also, i've set the wrapper as minimum height of 100%.
this isn't working, so
> my hunch is that it's having a knock on effect to the
measurements of the left
> hand column....but i may be wrong
>
> any help would be appreciated.
>
> the css file is
http://www.malcmabe.co.uk/listtest.css
>
> malc
Malcolm
That's not quite how faux columns work - you'd make an image
the width
of your container with the dimensions you need - perhaps a
line only to
separate a left and right column or something a little more
detailesd -
the image's height can be sliced very small as it will repeat
on the y
axis, attached via css to the container. You can then use
margins or
divs floated left and right to keep your content on either
side.
Something like this I made earlier......
http://www.bealeandpyper.co.uk/
and the background image......
http://www.bealeandpyper.co.uk/p7bpassets/images/p7bp_layout.jpg
btw most of us in here use the faster NNTP for accessing the
newsgroups
- OE, Outlook, Thunderbird and/or dedicated mail/newsreader
apps would
do to access them. Try clicking this link.....
news://forums.macromedia.com
HTH
chin chin
Sinclair

Similar Messages

Problem with faux column and 100% min height

hello
i',m trying to create a faux column on this page:
http://www.malcmabe.co.uk/listtest.html.
the column i'm trying to do is the left hand side menu
column.
i just can't get this to work, so i'm obviousley missing
something.
also, i've set the wrapper as minimum height of 100%. this
isn't working, so my hunch is that it's having a knock on effect to
the measurements of the left hand column....but i may be wrong
any help would be appreciated.
the css file is
http://www.malcmabe.co.uk/listtest.css
malc

malcster2 wrote:
> hello
>
> i',m trying to create a faux column on this
> page:
http://www.malcmabe.co.uk/listtest.html.
> the column i'm trying to do is the left hand side menu
column.
>
> i just can't get this to work, so i'm obviousley missing
something.
>
> also, i've set the wrapper as minimum height of 100%.
this isn't working, so
> my hunch is that it's having a knock on effect to the
measurements of the left
> hand column....but i may be wrong
>
> any help would be appreciated.
>
> the css file is
http://www.malcmabe.co.uk/listtest.css
>
> malc
Malcolm
That's not quite how faux columns work - you'd make an image
the width
of your container with the dimensions you need - perhaps a
line only to
separate a left and right column or something a little more
detailesd -
the image's height can be sliced very small as it will repeat
on the y
axis, attached via css to the container. You can then use
margins or
divs floated left and right to keep your content on either
side.
Something like this I made earlier......
http://www.bealeandpyper.co.uk/
and the background image......
http://www.bealeandpyper.co.uk/p7bpassets/images/p7bp_layout.jpg
btw most of us in here use the faster NNTP for accessing the
newsgroups
- OE, Outlook, Thunderbird and/or dedicated mail/newsreader
apps would
do to access them. Try clicking this link.....
news://forums.macromedia.com
HTH
chin chin
Sinclair

Problems with varchar2 column and a select statement

Hi to all,
I am new to ODP...so I would really appreciate your help..
I am having problems with using the following code:
con.ConnectionString = "User Id=bla;Password=bla;Data Source=bla;";
string cmdQuery = "SELECT * from try where data ="+textBox1.Text+"";
OracleCommand cmd = new OracleCommand(cmdQuery);
cmd.Connection = con;
cmd.CommandType = CommandType.Text;
OracleDataReader reader = cmd.ExecuteReader();
while (reader.Read())
MessageBox.Show(reader.GetString(0)+"");
cmd.Dispose();
con.Close();
where:
data is the name of a field in the table
textBox1 is the name of a text box where the user inserts the values..
The error that appears is "Invalid identifier"..
I hope it makes sense...and please help...

Hi,
I'm fairly sure it IS the single quotes actually. Print out the string you're trying to excute, then try it outside odp.net, does it work?
For example:
SQL> select * from dual where dummy=foo;
select * from dual where dummy=foo
ERROR at line 1:
ORA-00904: "FOO": invalid identifier
SQL> select * from dual where dummy='foo';
no rows selected
Cheers,
Greg

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problem with checkbox column in matrix

Hello.
I have a little problem with checkbox column in matrix.
Column is binded to the UserData.
It has ValOn="Y", ValOff="N".
I use C++. It is wird problem. In matrix I have 10 columns - scrollbar role and if You want see checkbox column, You must role to the right. If this column is on the screen, and I use:
checkcell->PutChecked(VARIANT_TRUE);
then the checkbox is cheched, and if the checkbox isn`t on the screen and I use this comment - it nothing happening.
I tried to use ValOn="Y", PutChecked...
The problem i solved if the column is on the screen - if the column is first in matrix or second, but if it`s last I have a big problem.
My column with checkbox is not editable, but I tried to make it editable, check it, and then make it uneditable - the same efect.
How can I solve it ?
Sorry for my english.
Kamil Wydra

Hello Kamil,
I am not sure about your problem, but here is an example of how to use checkbox in UI API.
First, create the matrix with checkbox column in Screen painter, and the output is an xml file, like this. Type as 121 indicates that it is a check box.
- <column AffectsFormMode="0" backcolor="-1" description="" disp_desc="0" editable="0" right_just="0" title="Rented" type="121" uid="Rented" val_off="N" val_on="Y" visible="1" width="41">
<databind alias="U_RENTED" databound="1" table="@VIDS" />
<ExtendedObject />
Second, bind the column to table from DB. This is a bug of 2004 Screen Painter, so if you are using 2005 Screen Painter, there is no problem.
Third, when you open the form, you can check and uncheck the cell.
BTW, please set the editable of the column to true.
Hope this helps,
Nick

Problem with Data Model and Analysis View

I create an analyze in BI Publisher and then i create a data model using this object.
When i try to generate an XML with a number of rows the BI Publisher return an empty XML (Only with de DATA_DS tags but no data).   To bypass this problem i make and XML file by hand and this allow me to create reports and design it but when i try to view the reports i got the message that says "No Data Found".
So i was check the analysis and all looks appears to be fine, In the results tab it show me a complete table with the data i was looking to use.
So i try to repeat the error and when i try to create the XML for the Data Model i found this two error in the logs:
[root@server ~]# [2013-07-17T16:37:22.844-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b34,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.828-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:37:26.865-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] oracle.xdo.servlet.CreateException: Path: /FOLDER/MODEL.xdm is not pointing to a report. Actual type: ReportItem, sub-type: DataModel[[
        at oracle.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
        at java.lang.Throwable.<init>(Throwable.java:196)
        at java.lang.Exception.<init>(Exception.java:41)
        at oracle.xdo.servlet.ReportException.<init>(ReportException.java:36)
        at oracle.xdo.servlet.CreateException.<init>(CreateException.java:18)
        at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:104)
        at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:128)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.getDataModelPath(DataProcessorFactory.java:207)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:99)
        at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:78)
        at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:157)
        at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346)
        at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101)
        at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074)
        at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639)
        at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492)
        at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462)
        at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:280)
        at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:313)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
And when i try to view the report that use the analysis i got this two warning in the logs:
[2013-07-17T16:58:01.615-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d7c,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
[2013-07-17T16:58:02.034-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d84,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
As i understand there is has a reference to a null value but i cant find what column of the analysis has the problem.
Any ideas about how to solve or debug this?
Thanks

I follow your instructions and it works fine. I can create the XML and the reports can show data.
So, i already know that there is no problem with the data and with the BI Publisher installation but i still doesn know what is the problem with the analysis view that fails.
Any idea how to debug it?
Thanks.

Hy, I have a problem with a new iPad Mini.

Hy, I have a problem with a new iPad Mini.
When I try to use the cameras, it doesn't work.
I get to take 3-4 pictures and after that all I see is the shutter.
It happends even if just start the camera app, or the facetime app, after 4-5s.
I've reinstalled IOS 6.1 but nothing changed.
It is a new ipad. What can I do?

Ok, Orange Romania changed my iPad mini but now I have another problem.
I bought the iPad mini on 01/feb/2013, took it to service on 06/feb/2013, and got another ipad mini on 12/feb/2013.
But the new ipad mini keeps requesting the password for some user [email protected], and it does it from the first day of activation. This is suspect for me, so I checked it's serial with selfsolve.apple.com and it shows "Estimated Expiration Date: January 31, 2014" and since it has one year free service I am worried the iPad mini wasn't new.
Please help.

WebRowSet Problem with database columns defined as TEXT??

Hello,
Can somebody help me on this subject. (http://forum.java.sun.com/thread.jspa?forumID=31&threadID=778586)
I have the same problem with TEXT column when I try to populate the WebRowset.
Thanks,
Stephane

OK,
I change my postgresql driver for the lastest version (postgresql-8.2-506.jdbc3.jar) for JVM 1.5 and it's find...
This driver support the javax.sql.
St�phane
Edited by: Borealis on Oct 15, 2007 12:43 PM

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

Im having problems with my illustrator , and i don't know how to fix it?

hey, guys. um my illustrator is having this problem with the navigator . and its makiing this fat lines and when i click the line on the little box in the bottom
and put it at 100 % it comes out like this
all small and i dont understand why is doing this.
can tou guys please help me with this i have a big project due and i cant work with this like it is ...>!!!!!

You can change your artboard size without having to make a new document.
1. Click on the Artboard Tool
2. In the top menu, you can type new dimensions. Make sure to type in the correct units!

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board.

I have a problem with my motherboard and my battery of my 2010 macbook pro 13". It was just serviced with a new screen, keyboard, and logic board. How much will a new battery and motherboard cost and would it be worth it or should I just get a new computer. It was about 300 dollars to get it serviced last week. if it adds up to much past 600 dollars I will just get a new one. THANKS FOR ANY HELP!
P.S During classes today it began beeping in my bag. Like three kind of long steady beeps then a short pause, and when I opened it I couldn't see anything but it was on so I turned it off and back on.

Depends on what options your Apple store offers - if they can do a depot repair (where they send it out), that's around $300 for all parts & labor.
If the store doesn't have that option, a logicboard is around $600, battery $80-$100, from what I've seen.
If they JUST replaced the logicboard, you absolutely should NOT have to pay for another replacement - the replacement is covered by a warranty. If they want you to pay for it, make sure you have a copy of the receipt for the work that was recently completed so you can show it to them. They have no reason to charge you for another logicboard.
~Lyssa

Dynamic gallery with 3 columns and 5 rows with paging

guyz, i am new to spry and i need your help. i want to create
a dynamic gallery with data source as xml. i want to create a
gallery with 3 columns and 5 rows.Basically a wallpaper page where
there would be 15 wallpapers in a page with a link of downloading
wallpapers with resolution 800x600,1024x768 and 1280x1024.
for example if there are 63 wallpapers for a section , then
there would be 5 pages with 5th page having only 3 wallpapers.
everytime a wallpaper is added to xml, it automatically adds
it up in html...
plz help....i really want to create this asap and i cant find
any help...

thanks a ton for your response.... Meanwhile i figured out
the solution myself using photogallery tutorial where div fixes the
width and the next repeated element get shifted to another
line.....
now i am struck with another problem.
i need to give substring to a particular data on xml.
for example i have the following xml
<movies>
<data>
Important Note: These online forums are for user-to-user
discussions of Adobe products, and are not an official customer
support channel for Adobe. If you require direct assistance, or
prefer to contact Adobe support staff directly, please contact
Adobe support.
</data>
</movies>
i want to display only first 50 characters of data tag.....
whats the code/syntax to do so.....

Hi every body. I have some problem with my i pad mini's keyboard . After i opened the message icon , suddenly the shape of my keybord has been chenged . I don't know how to fix it? I was wondering if you'd mind helping me.thanks .

Hi every body. I have some problem with my i pad mini's keyboard . After i opened the message icon , suddenly the shape of my keybord has been chenged . I don't know how to fix it? I was wondering if you'd mind helping me.thanks

That's so you can text with your thumbs. If it does' tog back together automatically put your finger on the tiny typewriter and you should get a pop up to reconnect keyboard. Or more easily put a finger on each one and pop them together.

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problem with faux column and min 100% height

Similar Messages

Maybe you are looking for