Problem with FCC @ Receiver Side (Reg., Shab's FCC blog)

Hi,
I have gone through the shab's FCC blog...https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3228. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I have configured the same in sender communication channel its working fine.
And have configured the FCC @ Reciver communication channel also with the following parameters.
RecordStructure= Header,Body,Trailer
Header.fieldSeparator = ,
Header.endSeparator= 'nl'
Body.fieldSeparator = ,
Body.endSeparator= 'nl'
Trailer.fieldSeparator = ,
Trailer.endSeparator= 'nl'
And, when I ran this interface its generating blank output file. So, what would be the problem
Can anybody can help me for the same....
Thanks n Advance.,
Abhi

Hi,
Refer this..
http://help.sap.com/saphelp_nw2004s/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
vasanth

Similar Messages

FCC Receiver side

Hi Experts,
Im working with the file to file scenario with FCC receiver side parameters ( sender xml with receiver text).
I want my fields with comma separated values...like... abc,xyz,mno.. so on...
Im giving the parameters as :
HEADER1.fieldSeparator: 'nl'
HEADER.fieldseparator: ,
Where the structure is Header1--->Header.
Im getting the error as :
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
Channel has not been correctly initialized and cannot process messages.
Please help.

Hi Robin,
My sender xml file structure is :
DT_FCCRec-->HEADER1->HEADER--->lastname,name,middle,company...so on till 10 fields.
My output file should be a text file with comma seperated values.
I need 5 rows...with 10fields seperated by comma:
name,lastname,firstname.....10 fields
name1,lastname1,firstname1...10fields
name5,lastname5,firstname5...10fields.

Problems with iPhone phone side

If this subject is in here already, I missed it in my search.
I've had my iPhone since Nov of 2007 and haven't had any problems with the phone side of it, until now. I've updated to 3.0.1, if I'm able to make/receive a call it's of very poor quality and usualy so bad I can't understand the person on the other end. If I haven't manually disconnected in frustration the phone will drop the call anyway.
The nearest Apple store is 3 hours away but from what I've been reading in here, the "Experts" don't know anything about v1.0 iPhones anyway so what would be the point of going. I have no need to upgrade to a 3G because I won't even use it for half of whats capable of. Heck, the v1.0 is more handheld than I need but up until now it has been the best phone I've ever had.
Is this an issue of the hardware being too old to play nice with the newer software or is this an ATT issue of using EDGE on a 3G network?

There is no issue with the older iPhones and the new OS (I have older original iPhone) running the latest OS (as so some of my friends, all with no issue).
Also, you are not using Edge on a 3G network, you are using Edge on Edge (they are different, the towers that had Edge get upgraded to add 3G or new towers are put in place with 3G and no Edge, yada, it isn't like Edge is replaced by 3G, they live separate lives)

Problems with sending/receiving picture messages

Does anyone know how to sort problems with sending/receiving picture messages on the iphone 4S? I've gone through all the re-setting etc at the place I bought it and it still doesn't work!! Spoken to 02 and they said it's an issue with Apple software?? Any help appreciated.

Can you send/receive SMS's? If so, and you can't send/receive MMS's, and MMS is turned on in Settings, 99.9% of the time the problem is on your carrier's end...most likely MMS is not provisioned properly on your account, regardless of what your carrier is telling you. Call back & have them remove MMS from your account & then re-provision your account for MMS.

Problem with BPM Receive step

Hy all,
I have a strage Problem with a BPM Definition into a receive step. I receive from SAP System IDoc and (per dynamic receive determination) I receive it into BPM.
But the Block that contains the receive Step can't be executed. I get following error message from XI :
Error when executing work item '000000177354'
Error when starting work item 000000177354
Work item 000000177345: Object FLOWITEM method EXECUTE cannot be executed
Error when executing work item '000000177354'
Runtime handle of object type could not be created
Exception 'ex_EDIFactOrder_received' caught and transferred to the exception handler
Error when executing work item '000000177354'
Could anyone help me please.
Thank's a lot.
Mat

I have following scenario :
Block 1
1) Infinite Loop with receive step
2) exception creation (2 minutes) (parallel to 1))
3) exception handler (parallel to 1))
Block 2
1) Mapping steps + send Steps + container Operation steps (set of flag)
2) Exception handler (paralle to 1))
Block 3
1) receive steps (where I get the error message)
I hope it's OK
Cheers
Mat

RD Gateway 2012 R2 (DMZ) - Problem with authentification (NULL SID)

Hello,
I have a problem with a RD Gateway 2012 R2, that domain users can't log on over the RD Gateway to the RD Sessionhost. I get an error message in the eventlog on the RD Gateway.
Protokollname: Security
Quelle: Microsoft-Windows-Security-Auditing
Datum: 09.12.2014 16:45:24
Ereignis-ID: 4625
Aufgabenkategorie:Anmelden
Ebene: Informationen
Schlüsselwörter:Überwachung gescheitert
Benutzer: Nicht zutreffend
Computer: DMZ2.bptest.local
Beschreibung:
Fehler beim Anmelden eines Kontos.
Antragsteller:
Sicherheits-ID: NULL SID
Kontoname: -
Kontodomäne: -
Anmelde-ID: 0x0
Anmeldetyp: 3
Konto, für das die Anmeldung fehlgeschlagen ist:
Sicherheits-ID: NULL SID
Kontoname: [email protected]
Kontodomäne:
Fehlerinformationen:
Fehlerursache: Bei der Anmeldung ist ein Fehler aufgetreten.
Status: 0xC000005E
Unterstatus:: 0x0
Prozessinformationen:
Aufrufprozess-ID: 0x0
Aufrufprozessname: -
Netzwerkinformationen:
Arbeitsstationsname: SCHULUNG
Quellnetzwerkadresse: -
Quellport: -
Detaillierte Authentifizierungsinformationen:
Anmeldeprozess: NtLmSsp
Authentifizierungspaket: NTLM
Übertragene Dienste: -
Paketname (nur NTLM): -
Schlüssellänge: 0
Dieses Ereignis wird beim Erstellen einer Anmeldesitzung generiert. Es wird auf dem Computer generiert, auf den zugegriffen wurde.
Die Antragstellerfelder geben das Konto auf dem lokalen System an, von dem die Anmeldung angefordert wurde. Dies ist meistens ein Dienst wie der Serverdienst oder ein lokaler Prozess wie "Winlogon.exe" oder "Services.exe".
Das Anmeldetypfeld gibt den jeweiligen Anmeldetyp an. Die häufigsten Typen sind 2 (interaktiv) und 3 (Netzwerk).
Die Felder für die Prozessinformationen geben den Prozess und das Konto an, für die die Anmeldung angefordert wurde.
Die Netzwerkfelder geben die Quelle einer Remoteanmeldeanforderung an. Der Arbeitsstationsname ist nicht immer verfügbar und kann in manchen Fällen leer bleiben.
Die Felder für die Authentifizierungsinformationen enthalten detaillierte Informationen zu dieser speziellen Anmeldeanforderung.
- Die übertragenen Dienste geben an, welche Zwischendienste an der Anmeldeanforderung beteiligt waren.
- Der Paketname gibt das in den NTLM-Protokollen verwendete Unterprotokoll an.
- Die Schlüssellänge gibt die Länge des generierten Sitzungsschlüssels an. Wenn kein Sitzungsschlüssel angefordert wurde, ist dieser Wert 0.
The domain administrator can log on successfully over the RD Gateway. When i log on a domain user on the RD Gateway server console first and then log on over the RD Gateway, the authentication works fine.
The RD Gateway 2012 R2 has been installed as well as the instructions (http://technet.microsoft.com/en-us/library/cc754191.aspx). I have tried a lots of things, but without a result.
e.g.
register NPS in the AD
all ports in the Firewall between LAN and DMZ are opened
set the "Network security: LAN Manager authentication level" to "Send NTLMv2 response only"
re-install of the RD Gateway 2012 R2
Environment:
All machines have Windows Server 2012 R2 or Windows 8/8.1 with the latest updates. All servers are virtualized with Hyper-V.
Domaincontroller (LAN)
RD Sessionhost (LAN)
RD Gateway (DMZ)
Clients (DMZ/WAN)
Hardware-Firewall (3-zone)
Does anyone have an idea, what might be the problem?
Best regards,
BpDk

Hi,
From your description seems there is user permission issue and that’s the reason you can’t logon to the remote desktop. For this you can I would like to check whether you have done the following steps for troubleshooting.
Need to create RD CAP and RD RAP policies and also add the user under RD CAP properties for proper access. RD CAPs allow you to specify who can connect to an RD Gateway server. You can specify a user group that exists on the local RD Gateway server or in Active
Directory Domain Services. You can also specify other conditions that users must meet to access an RD Gateway server. You can list specific conditions in each RD CAP. For example, you might require a group of users to use a smart card to connect through RD
Gateway.
When there is no AD DS in the perimeter network, ideally the servers in the perimeter network should be in a workgroup, but the RD Gateway server has to be domain-joined because it has to authenticate and authorize corporate domain users and resources.
Please check below article for more troubleshooting and provide access & authenticate user.
RD Gateway deployment in a perimeter network & Firewall rules
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Problem with File receiver

Hi, I have the following scenario, File->XI->File and
I have a problem with the File adapter (receiver). I can't generate it.
I was reading blog: File-Xi-File scenario donu00B4t work.
SXMB_MONI shows the message correctly but the receiver file is not generated.
Somebody can help me?
Thanks in advanced
Regards,
Sergio.

Hi Sergio,
I would suggest that you go through this blog for the entire File to File scenario and cross check this with the cofiguration done by you.
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
Also, do check these links for configuring your sender and receiver file adapters.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Regards,
Bhavesh
Message was edited by: Bhavesh Kantilal

My ipod classic crashes after about 2-3 days of being attached to my Kenwood KDC-248U receiver in Pickup. There are 2700 songs but only get through the first 200 Apple has replaced the Ipod 3x and Kenwood says it is not a problem with the receiver.

My ipod classic crashes after about 2-3 days of being attached to my Kenwood KDC-248C receiver in my Pickup. There are about 2700+ songs on the Ipod, but only get through the first 200 to 300 songs. The screen fades, but there is still power and a charge. Does anyone have a clue because I don't.?

There seem to be compatibilty isuue with KDC receiver and Ipod Classic firmware 1.1.2.
Here is an earlier post on the same problem.
https://discussions.apple.com/message/12471279#12471279
Good Luck on getting an earlier version ipod firmware. (Google it)

Problems with different received message from sql function

Hello all!
I have a little problem with my BPEL process. I call a sql function that returns a string. In this string I have a xml. The returned message can be something like:
<error><id>id_error</id><message>descr_error</message></error>
or
<comm>
<header>
children tags
</header>
<body>
children tags
</body>
</comm>
As you see, I can receive two types of messages. Of course, the process transforms string -> xml.
Depending on the type, the process must choose between two flows.
My questions are: what should be the solution(the steps) to determine what type of message the function returns? In my project, where should I define the same message types in order to assignate them to a variable? In a xsd?
Thanks in advance!!

seems like you could solve this with a <pick>. Take a look at the section "One Request, One of Two Possible Responses" in chapter 13 of the bpel developer guide.

Problem with file receiving through abap web service

Hi experts,
I need to created web service for import file from .NET application into SAP.
ABAP function expect hexadecimal string (same as GUI_UPLOAD / GUI_DOWNLOAD) but hexadecimal string from C# is too long (double longer), and I have no idea how to convert it. Also there is a problem with code page...
Is there some better way to do this? Any idea is welcome!

Hi Nemanja,
Please bear in mind that your SAP system is based on UTF-8 encoding. Since you have the xstring length doubled, most probably your sender system uses UTF-16 encoding. So what you need to do is change the encoding used by your .NET application when sending the data to SAP.
Alternatively, you can try using XSL Transformations in ABAP to have the input data converted from UTF-16-encoded xstring to ABAP structures. You can find a little example in this thread: ABAP data to XML conv with UTF-8 encoding and custom namespace. The point is to start your XSLT with the following: <?xml version="1.0" encoding="utf-16"?>.
Hope this helps,
Greg

Problems with the receiver

Hello,
I've just got my Nike + iPod today. I inserted the receiver to my iPod Nano and nothing happened...
When I go to Setting>About, there's no mention to the nike + ipod. The only place it shows in my iPod is under Settings>Main Menu. There I can find an on/off option, but it does nothing.
Do I have a broke one here?
Thanks,
Pedro

I would make sure both your iTunes and iPod software are fully up to date. If that is already so, try resetting your iPod with the receiver in it, by holding down your menu button and the center button at the same time for at least 3 seconds. This should shut off your iPod and give you the Apple trademark logo. Once that happens, you are ready to push the menu button and center button at the same time again and this should restart you iPod and hopefully Nike+ will then show up in our main menu (of course, you'll have to make sure that you still have Nike+ set to show on your main menu in your settings as you already played with).

PI - Problem with a receive WSDL message with encode (envelope)

Hello,
I'm having a ploblem with a PI interface with the scenario below (synchronous):
ECC (proxy) <-> PI <-> 3rdParty (soap)
The WSDL provided has a kind of envelope (soapenc:arrayType). Here's the structure declaration:
         <xs:complexType name="TTUDResultArray">
            <xs:sequence>
               <xs:element name="Success" type="xs:boolean" />
               <xs:element name="ErrorDescription" type="xs:string" />
               <xs:element name="Count" type="xs:int" />
               <xs:element name="Accounts" type="ns1:TTUDInquiryResultArray" />
            </xs:sequence>
         </xs:complexType>
         <xs:complexType name="TTUDInquiryResultArray">
            <xs:complexContent>
               <xs:restriction base="soapenc:Array">
                  <xs:sequence />
                  <xs:attribute xmlns:n1="http://schemas.xmlsoap.org/wsdl/" ref="soapenc:arrayType" n1:arrayType="ns1:TTUDInquiryResult[]" />
               </xs:restriction>
            </xs:complexContent>
         </xs:complexType>
When I import this WSDL as a External Definition, the field Accounts is displayed with error (in red), as the PI was incapable to read this kind of type definition.
Testing in SoapUI, the response message is displayed with a different structure than it's possible to see in the PI Operation Mapping:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/">
   <SOAP-ENV:Body SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:NS2="urn:TUDIntf">
      <NS1:InquireDateRangeResponse xmlns:NS1="urn:TUDIntf-ITUD">
         <return href="#1"/>
      </NS1:InquireDateRangeResponse>
      <NS2:TTUDResultArray id="1" xsi:type="NS2:TTUDResultArray">
         <Success xsi:type="xsd:boolean">true</Success>
         <ErrorDescription xsi:type="xsd:string"/>
         <Count xsi:type="xsd:int">2</Count>
         <Accounts xsi:type="SOAP-ENC:Array" SOAP-ENC:arrayType="NS2:TTUDInquiryResult[2]">
            <item href="#2"/>
            <item href="#3"/>
         </Accounts>
      </NS2:TTUDResultArray>
      <NS2:TTUDInquiryResult id="2" xsi:type="NS2:TTUDInquiryResult">
         <AvailableAmount xsi:type="xsd:double">49</AvailableAmount>
         <PaymentAmount xsi:type="xsd:double">49</PaymentAmount>
         <PaymentStatus xsi:type="xsd:string">AC</PaymentStatus>
         <PaymentNbr xsi:type="xsd:string">110201</PaymentNbr>
         <Success xsi:type="xsd:boolean">false</Success>
      </NS2:TTUDInquiryResult>
      <NS2:TTUDInquiryResult id="3" xsi:type="NS2:TTUDInquiryResult">
         <AvailableAmount xsi:type="xsd:double">50</AvailableAmount>
         <PaymentAmount xsi:type="xsd:double">50</PaymentAmount>
         <PaymentStatus xsi:type="xsd:string">AC</PaymentStatus>
         <PaymentNbr xsi:type="xsd:string">123456</PaymentNbr>
         <Success xsi:type="xsd:boolean">false</Success>
      </NS2:TTUDInquiryResult>
   </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I`ve tried to map the WSDL inside my interface, but always I test (on SPROXY or Runtime Workbench) an error message is displayed:
Error While Sending Message: Error stack from response: Runtime exception occurred during application mapping com/sap/xi/tf/_mmInquireEZCashtoEcc_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns1:mtInquireEcc_response. Values missing in queue context. Targe~
Someone knows if that's some tip of how to use this kind of WSDL?

Hello,
Looks like an RPC style WSDL to me. Can you ask the third-party to provide you with a document-literal wsdl? You can refer to the points mentioned by Stephan in this thread.
Problem with RPC/encoded WSDL
Thanks to Raj for pointing out that I did not have the thread link
Hope this helps,
Mark
Edited by: Mark Dihiansan on Dec 12, 2011 2:34 AM

E61: problems with automatically receiving emails

Hi.. I have had my E61 for quite a while already but am having problems with its internet connectivity. Basically everytime I attempt to connect to the mobile internet it very rarely connects on the first attemp, but normally I have to try 2-3 times for it to connect (even with full 3G reception. This means that when I set my email (IMAP) application to fetch emails every 2 hours it can't because it can't connect on the first time, so I have to manually connect to the mail application. Is there anything I can do to fix this with a firmware fix? or is it a problem with T-Mobile UK?
Thanks

It's the Yahoo servers. whether or not they are up and running have nothing to do with it. Password rejection is an ongoing problem with Yahoo. Sometimes it is caused by more then one device tryiing to access the Yahoo server with the same username and password at the same time or within minutes of one another. Yahoo by default only allows one connection for X amount of time. So if you have a smart phone with the yahoo mail setup on it and it tries to access the server and then your computer tries to access the server it will reject the request. Giving you the bad password dialog.
Switch your primary email over to Google Mail as Google does not have these restrictions and you can actually use IMAP with Google mail.
You can even forward all your yahoo mail to a google account so you don't have to go and change all your logons and contacts to use Gmail.

Problem with CC Receiver with AS2 Adapter Seeburger

Hi,
I try to test the AS2 Adapter with Receiver channel y one server and Sender channel in second server, but in the Receiver channel, I have the error :
"MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2."
I find the error and I found the URL Error in AS2 adapter. Object not found in lookup of as2.. Its urgent..!! with the same problem, but I have the same configuration in the Party of the receiver and the Sender, the same AS2ID name, and try with the solution in the forum respect the Party name in the scenario of the Receiver, but don't work.
My scenario is send an IDOC from R/3 to a partner with the AS2 receiver channel.
Is my fisrt scenario with AS2 adapter. Somebody help me please with any example or with any idea about the solution to my problem?
Greetings,
Hervey

I have resolved this problem, thanks.

Performance Problem on Soap Receiver Side

Hi,
my scenario is: FTP to SOAP (asynchronous) on PI 7.31 SP11.
The ftp sender is providing a few hundred files at once, unfortunately the processsing at productive environment takes too long, like 15-60 minutes, depending on the number of files.
What is really strange here, the same scenario is working 100% properly at the test environment! So i did some tests to find out the bottleneck:
FTP -> PI prod -> SOAP prod - slow
FTP -> PI test   -> SOAP prod - fast
FTP -> PI prod -> SOAP test   - fast
FTP -> PI prod -> NFS prod    - fast
So if found: Only slow, if i use the productive PI to productive soap receiver.
The adapter configuration is 100% the same as on test system.
I watched the slow messages and found:
First message:
Normal processing of the steps until "XISOAP: XI message received for processing".
Then it takes 4 seconds before "SOAP: Processing completed". This happens withing milliseconds on test environment.
Later messages stay longer and longer in a queue.The processing time is going up to 36 seconds (instead of 4).
-> Something is stopping / slowing them to be processed. This "stopper" becomes worse if more messages are processed.
Does anybody have an idea to explain this strange behaviour?
Regards,
Udo

Hi Udo,
The problem seems to be in the message system queue in the AFW in the production environment. It has sense because the SOAP pro and NFS pro are different adapters, however afaik the SOAP test channel uses the same thread pool that the SOAP pro in PI pro.
Have you check to increase the number of threads?. You can check the number of them,
in this URL http://host:port/MessagingSystem/monitor/systemStatus.jsp (System Status):
Regards.

Problem with FCC @ Receiver Side (Reg., Shab's FCC blog)

Similar Messages

Maybe you are looking for