Problem with field divided on two pages

Hello to all.
On paper design view the last field on first page continue on the second page. Problem is that field not continue at the begining of the page but much lower.
Anyone know where or what is the problem?
Thanks.

If I use the view-source: protocol to check the m3u link then I can play the MP3 file via the HTML5 media player on Linux via GStreamer support.
view-source:http://www.nrcu.gov.ua/media/ur1.m3u
view-source:http://nrcu.gov.ua:8000/ur1-mp3.m3u
* http://nrcu.gov.ua:8000/ur1-mp3
* http://nrcu.gov.ua:8000/ur2-mp3
* http://nrcu.gov.ua:8000/ur3-mp3
* http://nrcu.gov.ua:8000/ur4-mp3

Similar Messages

Very urgent : Problem with field attributes in Datasource

Hi
I am getting a problem with field attributes in the datasource.
The issue came up after i modified the extract structure-i modified one field and
added one field to the structure.Now those two fields are not visible in BW.
When i checked with transaction rsa2, i could find that for those two fields , the
field attribute is 'A' which is 'Field in OLTP and BW Hidden by SAP'.
I tried to modify the field attribute to make it visible.Now the issue is that it is not getting reflected after transport in the Q system.What can be the issue.In the Q system its still the old value 'A' ,which makes the fields invisible.
Please let me know what can be the issue.
Regards
Leon

Hi,
did you change this attribute via RSA2?
you need to change your datasource via postprocessing (RSA6); then transport your DS to your Q source system.
Replicate your datasources in your BW.
Finally modifiy your Transfer Structure by editing your TRules ( tab Datasource/Tran structure), move your new fields from the right frame to the left frame)
Maintain your TRules
Activate
hope this helps...
Olivier.

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Problem with printing more than one page (ghostscript broken?)

Hello,
since one of the last package updates I have problems with printing more than one page. The print problems occurs as well with pdf files as well with printing websites. I use an actual KDE system with commercial turboprint printer driver. The first page always prints fine, but all consecutive pages are corrupted. As from a similar problem some months ago, I assume a broken ghostscript package. I tried to downgrade ghostscript to check that, but I get depency problems:
root@arch32 dieter]# ls -l /var/cache/pacman/pkg/ghostscript-*
-rw-r--r-- 1 root root 9906288 21. Mär 2010 /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
-rw-r--r-- 1 root root 11402624 8. Okt 22:44 /var/cache/pacman/pkg/ghostscript-9.00-1-i686.pkg.tar.xz
[root@arch32 dieter]# pacman -U /var/cache/pacman/pkg/ghostscript-8.71-3-i686.pkg.tar.xz
Löse Abhängigkeiten auf...
Suche nach Zwischen-Konflikten...
Fehler: Konnte den Vorgang (Kann Abhängigkeiten nicht erfüllen) nicht vorbereiten
:: libspectre: benötigt ghostscript>=9.00
[root@arch32 dieter]#
Anyone else having printing problems or a solution for my problem?
Thanks, Dieter

This may not be related but I had a problem printing a pdf today whereby the second page got corrupted. The same pdf had printed fine several months ago. I realised that (long story) for some reason I had switched drivers (HP printer) from hpijs to hpcups. I installed the printer again as a "new" printer using the hpijs driver and it printed properly this time.
So it may be that the bug causes issues with some drivers. You could try an alternative driver for the printer as temporary workaround?

Problem with field GL Account is that it shows concatenated Chart of Accoun

Hello . Please help me. We have sap BI olap universe . problem with field GL Account is that it shows concatenated Chart of Accounts. But user want to trim the chart of account and show only account in list of values in webi report.
So What code I can put in Universe to remove this " 9000/" WHICH IS Chart of acct from GL Account
example List of values shows
9000/99030
9000/99070
I want to show as below
99030
99070
I tried replace function in universe it does not work. Pls help.
Thanks
soniya

Hi,
You can do it in Web Intelligence using the function Right().
Depending on the SAP BW version you have it is possible to build such calculated expression in universe on uniquename or name:
<EXPRESSION>RIGHT[0CALMONTH].currentmember.uniquename,5)</EXPRESSION>
OR
<EXPRESSION>RIGHT([0CALMONTH].currentmember.name,5)</EXPRESSION>
You have to replace 0CALMONTH by the unique definition of GL Accounts and you also need to use the object referencing GL Accounts in your query in addtion to the calculated expression.
Regatds
Didier

Problem with field label

Hello All,
I am having a strange problem with field label? I have created a table with three fields one is MANDT and and the remaining fields as PATID and PATNA.
I am maintaining the field label for these fields, but still i am not getting the names of the fields while i am calling the structure in my alv tree.
I d'nt know what is the problem here?
can any one tell me how can i solve this issue?
Regards,
Lisa

Hi lisa,
This is not the problem with Data Dictionary,
While declaring the fieldcatalogue for thr GRID.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
 I_STRUCTURE_NAME = 'ZTABLE'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
CHANGING
 ct_fieldcat = gt_fieldcat
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
If gt_fieldcat-fieldname = 'PATID'.
gs_fieldcat-ref_field = 'ZTABLE'.
modify gt_fieldcat from gs_fieldcat.
clear gs_fieldcat.
endif.
Because while calling the FM it is populatinh the fieldname
so you need to modify the fieldcatalogue with fieldname then it will pick the field labels from the Dictionary.
Hope this will solve your problem.
Regards,

Problem with field KONWA-Rate Unit(Currency or Percentage) of table KONP

Hi Gurus,
I m facing problem with field 'KONWA -Rate Unit (Currency or Percentage)' of table KONP. This field is showing Currency and '%' both in table KONP. For some materials its showing currency value and for some its showing '%'. Due to which its creating load problems. My question is how this '%' is coming (means is there any calculation behind that or something else) in table KONP and how can I identify this.
I am sure u will have the answer for this question so Thanks in advance.
Message was edited by:
        Amit Rajput
Message was edited by:
        Amit Rajput
null

Hi,
take the following example: you sell liquor to customers; in your country, when you sell liquor your company is entitled to pay customs and excise fees to governamental authorities.
These excises and duties are a percentage of the retail price. You'll then create such a condition record with this rate so that you calculation schema will post the correct value during the processing of billing documents...
hope this shed light
Olivier.
Message was edited by:
        Olivier Cora

Problem with config sync between two CSM-S modules

Hi everybody,
I have a problem with config sync between two CSM-S modules.
I am using CSM-S software version 2.1(8).
The acitve module is used in a 6509 with WS-SUP720-BASE supervisor running software version 12.2(18)SXF12a.
The standby module is used in a 6509-V with VS-S720-10G supervisor (no VSS setup) running software version 12.2(33)SXI3.
Failover seems to work fine:
switch-active#sh modu csm 2 ft
FT group 1, vlan 398
This box is active
Configuration is out-of-sync
priority 150, heartbeat 3, failover 40, preemption is on
switch-standby# sh modu csm 2 ft
FT group 1, vlan 398
This box is in standby state
Configuration is out-of-sync
priority 80, heartbeat 3, failover 40, preemption is on
The command (on active side) "hw-module contentSwitchingModule 2 standby config-sync" leads to following result:
switch-active:
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56042: Apr 14 16:21:44.223: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Bulk sync started
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56043: Apr 14 16:21:44.251: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configurations to Standby CSM, this may take several minutes!
2010-04-14T16:21:46+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56044: Apr 14 16:21:45.995: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:51+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56045: Apr 14 16:21:50.831: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:57+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56046: Apr 14 16:21:56.151: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56047: Apr 14 16:22:58.791: %CSM_SLB-3-REDUNDANCY: Module 2 FT error: Active: Manual bulk sync timed out
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56048: Apr 14 16:22:58.803: %CSM_SLB-3-REDUNDANCY: Module 2 FT error:
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56049: FT CONFIG SYNC: Failed config sync entity send
switch-standby:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2475: Apr 14 16:21:44.232: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Bulk sync started
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2476:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2477: Apr 14 16:21:44.240: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: STANDBY:Configuration is being received, This may take several minutes!
2010-04-14T16:21:49+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2478: Apr 14 16:21:48.824: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:54+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2479: Apr 14 16:21:53.964: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2480: Apr 14 16:21:58.852: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Started clearing configuration
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2481: Apr 14 16:21:59.400: %CSM_SLB-4-REDUNDANCY_WARN: Module 2 FT warning: Standby: Config Sync does not save running-config to startup-config
2010-04-14T16:22:00+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2482: Apr 14 16:21:59.400: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Previous configuration are being deleted from supervisor
The last log message on standby device seems to be correct - there is no CSM configuration after the attempted config sync.
Our configuration includes about 3500 lines and it is really uncomfortable to keep in sync manually.
Maybe someone has the same problem?
kind regards,
Christoph

Hi Christoph,
I am running into the exact same issue. Upon further investigation I've discovered that this is a known bug, CSCtd09117. You can read more about it here: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd09117 . Apparently this is fixed in ver 12.2(32.8.11)SX323 .
I haven't had a chance to upgrade yet, so I can't verify the fix, but if it works for you please let me know.
Regards,
Brandon

Problems with Apex4.2, SkillBuilders Modal Page plugin, IE9 and HTML5 theme

Hello everyone.
Please Help.
Again problems with Apex4.2, SkillBuilders Modal Page plugin, IE9 and HTML5 theme (Blue Respensive).
1. The problem is that all the popup windows display 100% of the width
2. After opens a popup window change the width of the parent window forms.
This happens only in IE9 browser.
In other browsers, the popup window only much larger than the form that is opened.
I can not change the size of the window.
Thanks.

Milk,
I changed the component level settings to use a fixed height and width (I adjusted edit, you still need to adjust create). You can try adjusting this some because the modal page should adjust a bit.
Then I added this CSS to the Inline CSS of the modal page:
section.uMessageRegion{position: static; !important;}
Let me know how this works for you.
Regards,
Dan
blog: http://DanielMcghan.us/
work: http://SkillBuilders.com/APEX/

Problem with field symbol

Hi!
I have a problem with a field-symbol like this:
DATA: gt_coep_ext TYPE kaep_t_coep_ext.
field-symbols <gt_data> type table.
ASSIGN gt_coep_ext TO <gt_pos_data>
This field symbol is used in the FM REUSE_ALV_GRID_DISPLAY as output table. I need add two fields in this <gt_data>. Is there any way to add new fields in the <gt_data> structure.
Thanks!!

Create your one Fieldcat
Global data declaration ***
TYPE-POOLS: SLIS.
<types: ... . " user definded types>
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: G_REPID LIKE SY-REPID.
DATA: GT_OUTTAB TYPE <UD_STRUCT> OCCURS 0 WITH HEADER LINE.
<data: ... . " user specific data>
Initialization field catalog ***
INITIALIZATION.
G_REPID = SY-REPID.
PERFORM FIELDCAT_INIT USING GT_FIELDCAT[].
Data selection ***
START-OF-SELECTION.
PERFORM SELECT_DATA TABLES GT_OUTTAB.
Display list ***
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = G_REPID
 IT_FIELDCAT = GT_FIELDCAT[]
 TABLES
 T_OUTTAB = GT_OUTTAB.
FORMS ***
FORM FIELDCAT_INIT USING RT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
 DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
 DATA: POS TYPE I VALUE 1.
Initialize keyfield(s)
CLEAR LS_FIELDCAT.
LS_FIELDCAT-COL_POS = POS.
LS_FIELDCAT-FIELDNAME = <GT_OUTTAB_FIELD_NAME>.
LS_FIELDCAT-REF_FIELDNAME = <DDIC_REF_FIELD_NAME>.
LS_FIELDCAT-REF_TABNAME = <DDIC_REF_TABLE_NAME>.
LS_FIELDCAT-KEY = 'X'. " sets key field
 APPEND LS_FIELDCAT TO RT_FIELDCAT.
Initialize normal field(s)
POS = POS + 1.
clear ls_fieldcat.
ls_fieldcat-col_pos = pos.
LS_FIELDCAT-FIELDNAME = <GT_OUTTAB_FIELD_NAME>.
LS_FIELDCAT-REF_FIELDNAME = <DDIC_REF_FIELD_NAME>.
LS_FIELDCAT-REF_TABNAME = <DDIC_REF_TABLE_NAME>.
 APPEND LS_FIELDCAT TO RT_FIELDCAT.
Initialize hidden field(s)
POS = POS + 1.
clear ls_fieldcat.
ls_fieldcat-col_pos = pos.
LS_FIELDCAT-FIELDNAME = <GT_OUTTAB_FIELD_NAME>.
LS_FIELDCAT-REF_FIELDNAME = <DDIC_REF_FIELD_NAME>.
LS_FIELDCAT-REF_TABNAME = <DDIC_REF_TABLE_NAME>.
LS_FIELDCAT-NO_OUT = 'X'. " sets hidden field
 APPEND LS_FIELDCAT TO RT_FIELDCAT.
ENDFORM. " fieldcat_init
FORM SELECT_DATA TABLES RT_OUTTAB LIKE GT_OUTTAB[].
<user specific data selection>
ENDFORM. " select_data

über problems with Z10 for past two weeks.

Hi there
For the past two weeks I've been having major problems with my Z10. I started noticing that my Whatsapp messages were coming through, but not making a sound. I reset and set the notification settings again, but still no luck. I figured since it was a 3rd party app, I'd maybe need to reinstall it. But then I also noticed that my text messages weren't coming through. Then some of my notifications (Facebook, Text message, Whatsapp and email) started staying "unread" even after I'd read them and even marked them as read. In fact, in desperation I even deleted the one text message thread, but it was still showing in my HUB. When I clicked on it it just showed blank since there was no longer a message there, but it wouldn't "disappear" from the HUB. Also, emails come through, but there is no sound or unread notification and I only see them if I check through the "read" emails in the HUB.
The only thing that helps for this is when I restart my phone - then all my texts come through, notifications work fine and everything is dandy - for about half an hour, then the same thing starts happening. This is really annoying, because I have to restart my phone several times a day to make sure I don't miss important messages (which has happened during this time).
Last week I wiped my phone and restored an update from 2 weeks earlier (when the phone wasn't giving problems), but once again it only worked for an hour max, then it was back to the same old problems.
I'm really frustrated at the moment, because what good is a smart phone to me if all it can do is make and receive calls? The ONLY things working properly at the moment (as far as I'm aware) is BBM and making and receiving calls.
*desperate*

Hi there
For the past two weeks I've been having major problems with my Z10. I started noticing that my Whatsapp messages were coming through, but not making a sound. I reset and set the notification settings again, but still no luck. I figured since it was a 3rd party app, I'd maybe need to reinstall it. But then I also noticed that my text messages weren't coming through. Then some of my notifications (Facebook, Text message, Whatsapp and email) started staying "unread" even after I'd read them and even marked them as read. In fact, in desperation I even deleted the one text message thread, but it was still showing in my HUB. When I clicked on it it just showed blank since there was no longer a message there, but it wouldn't "disappear" from the HUB. Also, emails come through, but there is no sound or unread notification and I only see them if I check through the "read" emails in the HUB.
The only thing that helps for this is when I restart my phone - then all my texts come through, notifications work fine and everything is dandy - for about half an hour, then the same thing starts happening. This is really annoying, because I have to restart my phone several times a day to make sure I don't miss important messages (which has happened during this time).
Last week I wiped my phone and restored an update from 2 weeks earlier (when the phone wasn't giving problems), but once again it only worked for an hour max, then it was back to the same old problems.
I'm really frustrated at the moment, because what good is a smart phone to me if all it can do is make and receive calls? The ONLY things working properly at the moment (as far as I'm aware) is BBM and making and receiving calls.
*desperate*

Urgent - problem with multiple users on same page

Hi all,
I have got an big problem with my app:
when several users are using the same page, the action launched by USER_A affects the page displayed and used for USER_B.
If there is only one user using the page, there is no problem at all.
The webapp is deployed on Tomcat or JBoss and the problem remains the same on both.
Thank you for your help.
PS: I am not accurate because I don't know what to paste here.

In fact, all my page beans are in REQUEST scope...
The only bean in Application scope is the standard applicationBean created by Creator itself.
We use one Bean in session scope which contains another class.
I will try to explain our common process:
- when logging into the app, the session Bean stores user data (rights for using app,...);
- when navigating in the app, the user can search data, modify them and create one (if he has the right to do it);
- to define the screen, we use a lot the beforeRenderResponse();
- when viewing a data, the user can choose to modify it, so depending on the action, the page is in "CONSULT" mode or "MODIFY" mode. In the second one, he can display new gridPanel (as a subform) to populate datatable.
The problem is obvious while using this grid: my grid can disappear if someone else has validated his form before me and if my page goes trough the beforeRender of my page.
It is not really clear. If needed, i can give access to our application to show the problem (and msn adress too to talk about it).
Thank you

Problem with exporting and printing from pages to PDF

I have a problem with my Pages
My font will not be embeded in my pdf files.
I have saved as a ps file and in to the destiller and my fonts are missing.
I need to send my file to the print shop but they will not accept my file and i now understand why.
fonts are missing...
Is there a workaround.
I have no problem in Indesign or quark but pages.....
I need help
thanks a zillion

The font is coming from a notation software Sibelius 4 and is namned opus
Hmmm ... Sibelius is a music notation software and notations are marked up in MusicXML. Presumably the font file is an SFNT with TrueType splines, but it is probably not installed in OS X system folders - rather in an internal Sibelius application font folder. So presumably you do not see the font in FontBook and OS X font auditing does not apply to the font.
Sibelius exports EPS files, right? If memory serves, an EPS is still legal even if the font resource is not embedded. And in any case, we know from the behaviour that the font resource is not embedded for some reason. So how do you get Sibelius to put the font resource inside the graphic ... normally there is a button in the EPS export procedure that gives you the option to Embed All Fonts.
You do not seem to get this button, though. Or why else would you not have checked it already and the problem would have gone away already.
The next point in troubleshooting this is that you are not following the path that would let OS X detect that an external font resource is not embedded.
I go from pages-print-printer- acrobat Pro 8-save as Pdf-x
What you are doing here is telling Pages to tell OS X to generate a PostScript program within which is nested your Encapsulated PostScript program with the call to an unresolved external font resource.
So why does Acrobat Pro not detect the unresolved external font resource? Hmm ... did you try the Preflight option in Acrobat 8 Pro? It should provide information on unresolved embeddings.
I have also tried pages-print-printer- acrobat Pro 8 and save pdf as postscript and put the postscript file in destiller 8 pro with defalt setting high quality print
The whole problem with EPS and PS is that this sort of situation is possible in the first place (plus, what is worse, the PS program can include custom additions to the graphics model that then fail in the PS interpreter whence Apple GX normalizing, Adobe Distiller normalizing, and Apple Quartz normalizing). You want to get as far away from EPS and PS as possible, believe me.
So, you have not done what I posted that you should do in the first place. If I were you, I would first get rid of the problem that the EPS is making a call to an external font and then get rid of the problem that the PostScript is preserving the external call.
To get rid of the problem that the EPS is preserving an external call, simply open the EPS in Apple Preview which includes a NORMALIZER for EPS/PS, and then save out the graphic as PDF. Alternatively, if you don't trust Quartz for some reason, set up a hotfolder for Distiller, make sure the option to embed all fonts is enabled, and convert the EPS to PDF.
Now replace your EPS in Pages with PDF in Pages, and don't save PostScript to disk but save PDF to disk through the proper procedure which is File > Print > PDF > Save as PDF/X [for your custom configuration of the PDF/X-3 filter considering that no sane person in North Europe prints lowend US SWOP, we use ISO].
If you begin by telling OS X that you want PDF within which fonts are supposed to be embedded ALWAYS, then you have started the right way. Otherwise, you have not told the operating system what you want to do, and this then leads you into places where you are unlikely to have the expertise to troubleshoot problems.
So, forget placing EPS in the first place, place PDF. And forget saving PostScript to disk, save PDF to disk. If that does not sort your problem, here is the dirty solution for professional prepress.
Adobe Photoshop has an EPS rasterizer that has wide tolerances for poor PostScript programming (so does Adobe Illustrator 6 and higher by the way).
Therefore, if an EPS is posing problems, one workaround is to rasterize the EPS at high resolution in Photoshop and place that high resolution PDF in your layout.
Take care that you rasterize as 1 bit at the required resolution of the print provider, probably 2450 dpi. When you save the 1 bit as PDF, Photoshop automatically compresses to a very, very small file (don't be surprised if 15Mb compresses to something like 0.5Mb).
Rasterizing in Photoshop should not be necessary if you simply start by telling the operating system what it is you are trying to do. Then the operating system should be able to take the right decisions for you, and tell if you if finds problems it cannot resolve without turning to you.
Good luck,
Henrik
would-be technical writer

Problem with opening/saving files in Pages/Numbers/Keynote

Hello, First of all: sorry for my bad english.
I had this problem already several months ago and already contact with the Apple hotline.
The only thing that was said then and was helped "new user account" - well done.
But:
I can not do this every 3 months.
The problem: I can not open a Pages / Numbers / Keynote files anymore.
From iCloud / iCloud Drive it goes, locally stored open still.
I'll get the error: "File can not be opened."
Newly created files I can not save - no matter which hard disk - it will show "missing access rights"
Of course, I've already deleted preferences, reset NV-RAM and repaired permissions (access rights) - via terminal "reset password" also.
Anyone here knows this problem and knows a solution?
Thanks in advance.
configuration:
MacPro (2009)
2x2,93 GHz
24 GB RAM
SSD + HDD
OS 10.10.2

I have solved the problem.
It occurred in connection with my scripture library „Font Explorer X Pro“.

Problem with field catalog after upgrade from 4.0

Hi experts,
We have recently upgraded from CRM 4.0 to 5.2.
I am now experiencing a problem with generation of a transport request for field catalog in transaction CTFC_CRM. I can generate the field catalog without errors.
The problem is that when I want to create the transport request in our dev system a pop up appears saying "Create object directory entry". Here I have to enter a package for some of the fields in the field catalog. The special thing is that the fields are not custom fields but rather SAP standard fields (using standard data elements). For example field BZIRK.
These are SAP standard fields but they are not standard in the field catalog. In 4.0 I did not get this prompt but this has apparently changed from 5.0.
What do I do? I guess if I need to create the objects I will need to use an SAP standard package. But how do I know what package to use?
Any comments or suggestions will be highly appreciated.
Best regards,
Anders

Hi,
If you did just install database, then you use Embed PL/SQL Gateway.
See this guide
Upgrading Oracle Application Express in Oracle Database Express Edition
I think you have not run step 5 script apxldimg.sql
Regards,
Jari

Problem with field divided on two pages

Similar Messages

Maybe you are looking for