Problem with field standard ship-to  in delta extraction

Hi developers,
I have a problem because using in infosource 2lis_11_vascl the field MCVBAP  PKUNWE Ship-to this is correctly filled in init procedure, but when I effectued the procedure delta, also when the sales order is not modified, I lose this infomation
Thanks and Best regards
Domenico

Hi Domenico,
it's better in this case to open an OSS message to SAP support, because it seems a bug in the std logic !
Bye,
Roberto

Similar Messages

  • Problem with the standard   RMDATIND

    Good afternoon
    I say that tango is a problem with the standard load of the material RMDATIND where the burden me all the good materials but in the CAT type of feedstock me what brand as subject to lot but I do not step parameter that the program that will be That someone can help me ..

    Thanks for the suggestion to debug the problem - but I have no idea what I'm looking for.
    I answer to your question, this is not restricted to just the one user. It has happened to a few, but not all. Not sure what the trigger is.
    Now it has happened for a non-portal user, that is to say when I run it test mode from SE80. Debugging has not shed any light on it. All behaves as I would expect. All the alv formatting code is executed, then the component loads and by default the 'standard view' has all column set as hidden.
    Looking at this from a different perspective, when, in an alv you create a custom view and 'save as' to store the settings, does anyone know where that is saved too ? Can we delete the settings for the user ? or see the personalization ?

  • Has anyone else had problem with the STANDARD package?

    Hi Oracle gurus, has anyone here had the same problem with the STANDARD package? Or do I have to reinstall Oracle to make it work?
    Thanks.
    Ben

    missesboggs wrote:
    I literally just called AT&T and Apple about this today.  I was having issues with iMessage and texting my husband.  His texts back to me would show up as my name.  Turns out it's because we share the same AppleID.  So, I'm currently trying to change mine, but it hasn't worked so far.  I'm on hold with Apple right now to see if I can get it fixed.
    Both of you have registered the same email address for iMessage. If you were using a shared Apple ID and you updated your phones to iOS5, the default will be the Apple ID. Go into settings and change it.

  • Very urgent : Problem with field attributes in Datasource

    Hi
    I am getting a problem with field attributes in the datasource.
    The issue came up after i modified the extract structure-i modified one field and
    added one field to the structure.Now those two fields are not visible in BW.
    When i checked with transaction rsa2, i could find that for those two fields , the
    field attribute is <b>'A'</b> which is <b>'Field in OLTP and BW Hidden by SAP'</b>.
    I tried to modify the field attribute to make it visible.Now the issue is that it is not getting reflected after transport in the Q system.What can be the issue.In the Q system its still the old value 'A' ,which makes the fields invisible.
    Please let me know what can be the issue.
    Regards
    Leon

    Hi,
    did you change this attribute via RSA2?
    you need to change your datasource via postprocessing (RSA6); then transport your DS to your Q source system.
    Replicate your datasources in your BW.
    Finally modifiy your Transfer Structure by editing your TRules ( tab Datasource/Tran structure), move your new fields from the right frame to the left frame)
    Maintain your TRules
    Activate
    hope this helps...
    Olivier.

  • Problem with field GL Account is that it shows concatenated Chart of Accoun

    Hello . Please help me. We have sap BI olap universe . problem with field GL Account is that it shows concatenated Chart of Accounts. But user want to trim the chart of account and show only account in list of values in webi report.
    So What code I can put in Universe to remove this " 9000/" WHICH IS Chart of acct from GL Account
    example List of values shows
    9000/99030
    9000/99070
    I want to show as below
    99030
    99070
    I tried replace function in universe it does not work. Pls help.
    Thanks
    soniya

    Hi,
    You can do it in Web Intelligence using the function Right().
    Depending on the SAP BW version you have it is possible to build such calculated expression in universe on uniquename or name:
    <EXPRESSION>RIGHT[0CALMONTH].currentmember.uniquename,5)</EXPRESSION>
    OR
    <EXPRESSION>RIGHT([0CALMONTH].currentmember.name,5)</EXPRESSION>
    You have to replace 0CALMONTH by the unique definition of GL Accounts and you also need to use the object referencing GL Accounts in your query in addtion to the calculated expression.
    Regatds
    Didier

  • Problem with field label

    Hello All,
    I am having a strange problem with field label? I have created a table with three fields one is MANDT and and the remaining fields as PATID and PATNA.
    I am maintaining the field label for these fields, but still i am not getting the names of the fields while i am calling the structure in my alv tree.
    I d'nt know what is the problem here?
    can any one tell me how can i solve this issue?
    Regards,
    Lisa

    Hi lisa,
    This is not the problem with Data Dictionary,
    While declaring the fieldcatalogue for thr GRID.
    CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      I_BUFFER_ACTIVE              =
       I_STRUCTURE_NAME             = 'ZTABLE'
      I_CLIENT_NEVER_DISPLAY       = 'X'
      I_BYPASSING_BUFFER           =
      CHANGING
        ct_fieldcat                  = gt_fieldcat
    EXCEPTIONS
      INCONSISTENT_INTERFACE       = 1
      PROGRAM_ERROR                = 2
      OTHERS                       = 3
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    If gt_fieldcat-fieldname = 'PATID'.
    gs_fieldcat-ref_field = 'ZTABLE'.
    modify gt_fieldcat from gs_fieldcat.
    clear gs_fieldcat.
    endif.
    Because while calling the FM it is populatinh the fieldname
    so you need to modify the fieldcatalogue with fieldname then it will pick the field labels from the Dictionary.
    Hope this  will solve your problem.
    Regards,

  • Problem with field  KONWA-Rate Unit(Currency or Percentage) of table KONP

    Hi Gurus,
    I m facing problem with field 'KONWA -Rate Unit (Currency or Percentage)' of table KONP. This field is showing ‘Currency’ and '%' both in table KONP. For some materials its showing currency value and for some its showing '%'. Due to which its creating load problems. My question is how this '%' is coming (means is there any calculation behind that or something else) in table KONP and how can I identify this.
    I am sure u will have the answer for this question so Thanks in advance.
    Message was edited by:
            Amit Rajput
    Message was edited by:
            Amit Rajput
    null

    Hi,
    take the following example: you sell liquor to customers; in your country, when you sell liquor your company is entitled to pay customs and excise fees to governamental authorities.
    These excises and duties are a percentage of the retail price. You'll then create such a condition record with this rate so that you calculation schema will post the correct value during the processing of billing documents...
    hope this shed light
    Olivier.
    Message was edited by:
            Olivier Cora

  • Problem with field catalog after upgrade from 4.0

    Hi experts,
    We have recently upgraded from CRM 4.0 to 5.2.
    I am now experiencing a problem with generation of a transport request for field catalog in transaction CTFC_CRM. I can generate the field catalog without errors.
    The problem is that when I want to create the transport request in our dev system a pop up appears saying "Create object directory entry". Here I have to enter a package for some of the fields in the field catalog. The special thing is that the fields are not custom fields but rather SAP standard fields (using standard data elements). For example field BZIRK.
    These are SAP standard fields but they are not standard in the field catalog. In 4.0 I did not get this prompt but this has apparently changed from 5.0.
    What do I do? I guess if I need to create the objects I will need to use an SAP standard package. But how do I know what package to use?
    Any comments or suggestions will be highly appreciated.
    Best regards,
    Anders

    Hi,
    If you did just install database, then you use Embed PL/SQL Gateway.
    See this guide
    Upgrading Oracle Application Express in Oracle Database Express Edition
    I think you have not run step 5 script apxldimg.sql
    Regards,
    Jari

  • Problem with field symbols in ecc 6.0

    i have the following  code  written in 4.6 version   now i am executing the old report   in 6.0  but  i am facing with some unicode error.
      FIELD-SYMBOLS:
        <line_of_bs_table> LIKE tbl1024,
       READ TABLE bs_table INDEX row_bst ASSIGNING  <line_of_bs_table> .
        buffer_bsbuffer_ptr(aux) =  <line_of_bs_table> >col_bst.
    tb1024 is standard sap structure  for storing buffer contents
    i have the following error in ecc 6.0
    structure type   '<line_of_bs_table> >+col_bst'  does not start with a charecter type  field in unicode programs in such cases
    offset/ length declarations are not allowed.
    can any one tell how can a field symbol  structure is changed  to charecter  type.

    Hi elinuk,
    you have already posted this thread in the ABAP general forum under problem in field symbols in ecc6.0 and I think that this forum is more related to this issue than the DMS forum. So please close this thread and investigate this issue further in the ABAP general forum.
    Best regards,
    Christoph

  • Problem with FIELD SYMBOL upgrading from 46c to ECC6.0

    Hi people... i'm having big trouble making an upgrade from 4.6c to ECC6.0 with this portion of code of Z's programm.
    In the line
    ASSIGN (w_field) TO <fs_field>.
    i don't see any assigment, so <fs_field> remains empty, when enters into firts IF conditions it is TRUE, then go into second IF condition, it is FALSE, and finally assing
    <fs_field> = '/'.
    , at this point i have a DUMP telling me MOVE_TO_LIT_NOTALLOWED_NODATA
    I'm try any way of definition, assigment, but always i have a DUMP.
    Someone can give a hand with this issue!
    Thanks in advance!!!
    This is the full code from the FORM with the problem.
    *       FORM GRABA                                        *
    *  -->  VALUE(P_TABLE)                                  *
    FORM graba USING value(p_table) TYPE c.
      DATA:
        w_field(60),
        w_dd03l  TYPE dd03l.
      FIELD-SYMBOLS <fs_field>.
      CLEAR w_flag.
      CASE p_table.
        WHEN 'BGR00'.
          d_bgr00-group  = w_batin.
          d_bgr00-mandt  = sy-mandt.
          d_bgr00-usnam  = sy-uname.
          d_bgr00-xkeep  = 'X'.
          d_bgr00-nodata = '/'.
          d_bgr00-stype = 0.
          TRANSFER d_bgr00 TO w_fname.
        WHEN 'BBKPF'.
          LOOP AT gt_dd03l INTO w_dd03l WHERE tabname EQ p_table.
            CONCATENATE
                'd_'
                w_dd03l-tabname
                w_dd03l-fieldname
              INTO w_field.
            ASSIGN (w_field) TO <fs_field>.
            IF <fs_field> IS INITIAL OR <fs_field> EQ '/'.
              IF w_dd03l-fieldname EQ 'TBNAM'.
                <fs_field> = p_table.
              ELSE.
                <fs_field> = '/'.
              ENDIF.
            ELSE.
              w_flag = 'X'.
            ENDIF.
          ENDLOOP.
          TRANSFER d_bbkpf TO w_fname.
        WHEN 'BBSEG'.
          LOOP AT gt_dd03l INTO w_dd03l WHERE tabname EQ p_table.
            CONCATENATE
                'd_'
                w_dd03l-tabname
                w_dd03l-fieldname
              INTO w_field.
            ASSIGN (w_field) TO <fs_field>.
            IF <fs_field> IS INITIAL OR <fs_field> EQ '/'.
              IF w_dd03l-fieldname EQ 'TBNAM'.
                <fs_field> = p_table.
              ELSE.
                <fs_field> = '/'.
              ENDIF.
            ELSE.
              w_flag = 'X'.
            ENDIF.
          ENDLOOP.
          TRANSFER d_bbseg TO w_fname.
      ENDCASE.
    ENDFORM.
    Edited by: Matt on Dec 15, 2008 5:03 PM - Made subject more informative

    Gentlemen:
    The problem around this statement:
    ASSIGN (w_field) TO <fs_field>
    is explained as follows:
    1. In ABAP language, there are two ways for assigning a new value to a field-symbol.
    - Sentence: ASSIGN (values) TO <my_field_symbol>.
      In this case, the <my_field_symbol> receives from (w_field) the data type and value content of this variable. So, we keep that a FSymbol is assigned and, at the same time, receives an initial value.
    - Sentence: <my_field_symbol> = '/' or <my_field_symbol> = my_var.
      In this way, we only pass the content of the variable next to = sign. But before this, the field-symbol must had been assigned (using ASSIGN statement), in another case, the compiler raises an exception.
    Following the example of Federico... I think he tried to assign a field like this (please, supose the program imports the structure of a database table with a standard function, into a internal table which is looped by the work area w_field ):
    - If w_field contains 'BKPF-WERKS', so sentence ASSIGN will affect the field symbol, passing to this the data type and current content of table field BKPF-WERKS.
    - If w_field contains 'BKPF-.INCLUDE': *the column .INCLUDE obviously is not associated with a data type... so our statement ASSIGN... TO... never pass any data type or value to our field-symbol. So that, this field is never initialized properly, and when inmmediately you try to execute something like this: <my_field_symbol> = '/', the game (program) is over.. XD
    I hope this post was helpful for anyone...
    Best Regards!!
    RRG
    ABAPer(u) - EVOLution

  • Problem with field EIPO-SEGAL in Foreing trade

    Hi all,
    We have a problem with a field of foreign trade. The field is the EIPO-SEGAL. We customizing (path: Sales and Distribution -> Foreign Trade / Customs -> Periodic Declarations -> Control Data -> Inclusion and Exclusion Indicators -> Assign Item Categories for SD to Sales Orders / Assign to Item Categories for Deliveries SD) for a standard item category (TAX = Non-stock item) the exclusion indicator (01 = Exclusion indicator INTRASTAT). The material is a service provided to a client community, so it is not necessary to consider the bill in the Intrastat declaration (legal services do not have to testify).
    We have also cleared the GRWR condition for the particular sector of the material (50 = Services)
    The problem we detected is that this field is not automatically determined by generating a delivery document. This causes that when the invoice is generated, with reference to delivery, can not create the accounting document automatically require data on foreign trade.
    We have tried to locate some OSS note but without result for our problem.
    We do not know if it is a problem of customizing or is it a program error.
    Could anyone guide me on how to resolve this?
    I hope I explained it so that it understands (my English is not very good)
    Best Regards.
    Marga Lluva

    Hi all,
    We have a problem with a field of foreign trade. The field is the EIPO-SEGAL. We customizing (path: Sales and Distribution -> Foreign Trade / Customs -> Periodic Declarations -> Control Data -> Inclusion and Exclusion Indicators -> Assign Item Categories for SD to Sales Orders / Assign to Item Categories for Deliveries SD) for a standard item category (TAX = Non-stock item) the exclusion indicator (01 = Exclusion indicator INTRASTAT). The material is a service provided to a client community, so it is not necessary to consider the bill in the Intrastat declaration (legal services do not have to testify).
    We have also cleared the GRWR condition for the particular sector of the material (50 = Services)
    The problem we detected is that this field is not automatically determined by generating a delivery document. This causes that when the invoice is generated, with reference to delivery, can not create the accounting document automatically require data on foreign trade.
    We have tried to locate some OSS note but without result for our problem.
    We do not know if it is a problem of customizing or is it a program error.
    Could anyone guide me on how to resolve this?
    I hope I explained it so that it understands (my English is not very good)
    Best Regards.
    Marga Lluva

  • Dynamic ITAB copy problem with field type P

    Hello everyone
    I need to copy the structure of an internal table that is pass by reference into a method.
    Actually everything is fine else than the field type P with decimal is not created properly in the new itab.
    Scenario:
    An internal table is pass by reference to a method. We need to trait the data without modifying the original table. The Idea is to copy the structure and the data of the referenced internal table into an internal table created dymanically in the method.
    Here is what I did and working fine when there are no field of data type "CURR".
    Extract the structure of the reference data.
    Create a dynamic internal table.
    So far so good. Everything seams to work fine. BUT
    when I am trying to copy the data from the reference table to the just created internal table the field with data type "CURR" doesn't work.
    Here is my example:
    FIELD-SYMBOLS: <FS_TABLE> TYPE STANDARD TABLE,
                   <TMP_TABLE> TYPE STANDARD TABLE,
                   <LS_TMP_TABLE> TYPE ANY,
                   <LS_TABLE>     TYPE ANY,
                   <LS_VALUE>     TYPE ANY.
    DATA: lt_data      TYPE STANDARD TABLE OF vbak,
          ls_data      LIKE LINE OF lt_sortfield,
          ref_data     TYPE REF TO data,
          l_structure  TYPE REF TO DATA,
          lv_ltname    TYPE string.               
    select * from vbak UP TO 10 rows INTO CORRESPONDING FIELDS OF TABLE lt_data.
    * --- Assign the reference variable to the table
    * ---- Only use to simulate a parameter that is assign to a reference to a internal table
    unassign <FS_TABLE>.
    lv_ltname = 'lt_data[]'.
    ASSIGN (lv_ltname) to <FS_TABLE>.
    GET REFERENCE OF <FS_TABLE>[] INTO ref_data.
    * --- Assign the reference to the field-symbol
    UNASSIGN <FS_TABLE>.
    ASSIGN ref_data->* TO <FS_TABLE>.
    * --- Create a working area for the reference table to a field-table
    CREATE DATA l_structure LIKE LINE OF <FS_TABLE>.
    ASSIGN l_structure->* TO <LS_TABLE>.
    * --- Retrieve the structure of the field-symbol pointing to the internal table
    DATA: lr_tabledescr   TYPE REF TO cl_abap_tabledescr,   " Internal Table description
          _r_structdescr  TYPE REF TO cl_abap_structdescr.
    lr_tabledescr ?= cl_abap_tabledescr=>describe_by_data( <fs_table> ).
    _r_structdescr ?= lr_tabledescr->get_table_line_type( ).
    * --- Read internal table structure to create dynamic internal table
    data: ls_struc like LINE OF _r_structdescr->components,
          xfc           type lvc_s_fcat,
          ifc           type lvc_t_fcat.
    * --- Why the field (component) NETWR length is now 8 instead of 15?
    LOOP AT _r_structdescr->components into ls_struc.
      clear xfc.
      xfc-fieldname = ls_struc-name .
      xfc-datatype  = ls_struc-type_kind.
      xfc-inttype   = ls_struc-type_kind.
      xfc-intlen    = ls_struc-length.
      xfc-decimals  = ls_struc-decimals.
      append xfc to ifc.
    ENDLOOP.
    DATA:   dy_table      type ref to data,
    * --- Create dynamic internal table
    call method cl_alv_table_create=>create_dynamic_table
      EXPORTING
        it_fieldcatalog = ifc
      IMPORTING
        ep_table        = dy_table.
    * --- assign reference internal table to Field-symbol
    assign dy_table->* to <tmp_table>.
    unassign <ls_tmp_table>.
    DATA: ls_tmp_struc type REF TO DATA.
    CREATE DATA ls_tmp_struc like LINE OF <tmp_table>.
    ASSIGN ls_tmp_struc->* TO <ls_tmp_table>.
    Loop at <fs_table> INTO <LS_TABLE>.
    MOVE-CORRESPONDING <ls_table> TO <ls_tmp_table>.
    APPEND <ls_tmp_table> TO <tmp_table>.
    ENDLOOP.
    * <fs_table>-netwr length is 15
    * <ls_tmp_table>-netwr length is 8
    * ??????????? Why the length is different?
    * ??????????? It should a structure copy and have the
    * ??????????? same length
    I use VBAK as example, and the field NETWR is using data type "NETWR_AK" where it us a data type "CURR" with length 15 and decimal 2.
    When reading the structure, the method get_table_line_type of the class cl_abap_tabledescr return a length of 8 instead of 15.
    Any idea how to get the exact structure of a variable that is refering to a data type?
    Regards
    Daniel

    Hello Everyone
    Thank you for your replies.
    I think I didn't explain myself clearly.
    My goal is to be able to create an exact  structure copy of a "Type ref to data" into a new internal table that is not defined yet.
    Example:
      A method contain a parameter that is a ref to DATA type.
      That parameter is refering to an internal table from the calling program.
      Now I want to create an internal table into the method where this one will be an exact structure copy of the parameter.
      So, lets put some name here.
      parameter: ip_data type ref to data.
      FIELD-SYMBOLS: <FS_REF_DATA> TYPE STANDARD TABLE,
                                    <FS_CP_DATA>  TYPE STANDARD TABLE.
    ASSIGN ip_data->* TO <FS_REF_DATA>.
    " some code to assign the same structure to <FS_CP_DATA> from <FS_REF_DATA>
    " than copy the data from <FS_REF_DATA> to <FS_CP_DATA>.
    <FS_CP_DATA> [ ] = <FS_REF_DATA> [ ].  " This is working if no type P with decimal exist into the structure
    " Than I can play with the data of <FS_CP_DATA> without modifying the data of <FS_REF_DATA>.
    My problem would be solved if I can create dynamically an internal table that has an exact structure copy of the passed parameter.
    Regards
    Daniel

  • Problem with field type STRING in table

    Hi Experts,
             I am new to ABAP. I have created a new transparent table which hold error info. One of the field has to store data of size about 1500 char.
    Since CHAR type is not acceptable for this field So I gave STRING type. Now when I try to create a TABLE parameter in a RFC enabled functional module using "LIKE YERROR" Then I get a error:
    "YERROR must be a flat structure. You cannot use internal tables, strings, references, or structure as component" 
    Why is this error? How to resolve it? Is it because I have used a field of type STRING in the table? If this is the problem then what other type can I use?
    What are other know problems with using STRING type?
    Please help!
    Thanks
    Gopal

    Hi,
    Try to declare it as type LCHR , it can hold up to 32000 chars.
    Regards
    vijay

  • Problem with field-symbols in UNICODE conversion

    Hi all.
    I'm in a UNICODE conversion project and I have a problem with a program that uses field-symbols.
    DATA: BEGIN OF wa_data_aux,
            mandt LIKE zindices-mandt,
            kschl LIKE zindices-kschl,
            datab LIKE zindices-datab,
            valor LIKE zindices-valor,
            descripcion LIKE zindices-descripcion,
            ernam LIKE zindices-ernam,
            erdat LIKE zindices-erdat,
            waers LIKE zindices-waers,
          END OF wa_data_aux.
    FIELD-SYMBOLS:
                   <fs2>  TYPE ANY,
                   <fs3>  LIKE wa_data_aux.
              <fs2> = <fs3>.
    This assignment results in a DUMP.
    Can anybody help me to solve this problem?
    Thanks!!

    TYPES: BEGIN OF wa_data_aux,
              mandt TYPE mandt,
              kschl TYPE kschl,
              erdat TYPE d,
              waers TYPE waers,
          END OF wa_data_aux.
    DATA: w_aux TYPE wa_data_aux.
    FIELD-SYMBOLS:
    <fs2> TYPE ANY,
    <fs3> TYPE wa_data_aux.
    w_aux-mandt = '300'.
    ASSIGN w_aux TO <fs3>.
    ASSIGN <fs3> TO <fs2>.
    WRITE : / <fs2>.
    GBY.

  • Problem with field-length in sql-loader

    Hello,
    (sorry I see it's the wrong forum -> SQL-Developer, I searched for SQL-Loader, is there a possibility to change the forum ?)
    I can't find an answer for my question at google, so I hope there is someone in this forum who can help me.
    I have a dat-File that contains 12 500 000 records and want to laod it via sql-loader. The first field contains the ID and there were numbers from 1 to 12 500 000 stored.
    When I run the sql-loader, the ID run up to 9 999 999 and then, for the last 2 500 001 records, ist starts at 1 again.
    I noticed a few things :
    1. Numbers < 10 000 000 don't make Problems
    2. Numbers >= 10 000 000 make Problems, the first digit ( in this example "1") is cut, so the number "10 000 001" ist stored as "1". It comes to double entries (IDs 1 to 2 500 000).
    3. The same field-definition, I have for the third field of the record -> there is no Problem. THERE I can store any number.
    4. I tried to store a number > 100 000 000 -> the first digit was cut too, but ONLY the first digit.
    5. I'm able to store any number manually in the Database.
    So, I have a problem with the first field. If the number is greater then 10 000 000, the first Number is cut. It doesn't make any differance, if the number is 10 000 000 or 999 999 999, just the first digit, in the first field, is cut.
    Any idea ??????????
    Here some infos :
    Database :
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    SQL-PLUS :
    SQL*Plus: Release 10.2.0.4.0 - Production
    Script sqlldr :
    sqlplus ${schema}/$2 <<EOF >>LOAD.LOG
    set timing on
    set echo on
    set heading off
    set heading on
    !sqlldr userid=${schema}/$2 control=surface_geometry.ctl log=surface_geometry.log
    exit
    EOF
    ctl-File :
    LOAD DATA
    INFILE imp_surface_geometry_test2
    TRUNCATE
    CONTINUEIF NEXT(1:1) = '#'
    INTO TABLE SURFACE_GEOMETRY
    FIELDS TERMINATED BY '|'
    TRAILING NULLCOLS (
    ID INTEGER EXTERNAL ,
    GMLID,
    GMLID_CODESPACE,
    PARENT_ID NULLIF PARENT_ID = BLANKS,
    ROOT_ID NULLIF ROOT_ID = BLANKS,
    IS_SOLID,
    IS_COMPOSITE,
    IS_TRIANGULATED,
    IS_XLINK,
    IS_REVERSE,
    GEB_ID,
    GEOMETRY COLUMN OBJECT
    SDO_GTYPE INTEGER EXTERNAL,
    SDO_SRID CONSTANT 31468,
    SDO_ELEM_INFO VARRAY TERMINATED BY '|/'
    (X FLOAT EXTERNAL),
    SDO_ORDINATES VARRAY TERMINATED BY '|/'
    (X FLOAT EXTERNAL)
    Table-Definition (sql-File) :
    CREATE TABLE SURFACE_GEOMETRY (
    ID NUMBER,
    GMLID VARCHAR2(256),
    GMLID_CODESPACE VARCHAR2(1000),
    PARENT_ID NUMBER,
    ROOT_ID NUMBER,
    IS_SOLID NUMBER(1,0),
    IS_COMPOSITE NUMBER(1,0),
    IS_TRIANGULATED NUMBER(1,0),
    IS_XLINK NUMBER(1,0),
    IS_REVERSE NUMBER(1,0),
    GEB_ID CHAR(7),
    GEOMETRY MDSYS.SDO_GEOMETRY,
    CONSTRAINT c_unique_id UNIQUE (ID))
    storage (initial 1M next 1M maxextents 1024) ;
    Some Entries in the dat-File :
    12556067| |XXX|12556066|12556066|0|0|0|0|0| |
    #3003|1|1003|1|/
    #4479400.000000|5333360.000000| 526.870000|4479380.000000|5333360.000000| 526.720000|4479400.000000|5333340.000000| 526.980000|4479400.000000|5333360.000000| 526.870000|/
    12556068| |XXX| |12556068|0|0|1|0|0| |
    #||/
    #|/
    12556069| |XXX|12556068|12556068|0|0|0|0|0| |
    #3003|1|1003|1|/
    #4479380.000000|5333380.000000| 526.600000|4479380.000000|5333360.000000| 526.720000|4479400.000000|5333360.000000| 526.870000|4479380.000000|5333380.000000| 526.600000|/
    log-File : (100 records for the test)
    SQL*Loader: Release 10.2.0.4.0 - Production on Fr Mai 28 15:16:43 2010
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    Kontrolldatei: surface_geometry.ctl
    Datendatei: imp_surface_geometry_test.dat
    Fehlerdatei: imp_surface_geometry_test.bad
    Datei für zurückgewiesene Sätze: nichts spezifiziert
    (alle Discards zulassen)
    Zu ladende Anzahl: ALL
    Zu überspringende Anzahl: 0
    Zulässige Fehler: 50
    Bind-Array: 64 Zeilen, maximal 256000 Bytes
    Fortsetzung: 1:1 = 0X23(Zeichen '#'), im nächsten physischen Satz
    Benutzer Pfad: Konventionell
    Tabelle SURFACE_GEOMETRY, geladen von jedem logischen Satz.
    Insert-Option in Kraft für diese Tabelle: TRUNCATE
    Option TRAILING NULLCOLS ist wirksam
    Spaltenname Position Läng Term Eing Datentyp
    ID FIRST * | CHARACTER
    GMLID NEXT * | CHARACTER
    GMLID_CODESPACE NEXT * | CHARACTER
    PARENT_ID NEXT * | CHARACTER
    NULL wenn PARENT_ID = BLANKS
    ROOT_ID NEXT * | CHARACTER
    NULL wenn ROOT_ID = BLANKS
    IS_SOLID NEXT * | CHARACTER
    IS_COMPOSITE NEXT * | CHARACTER
    IS_TRIANGULATED NEXT * | CHARACTER
    IS_XLINK NEXT * | CHARACTER
    IS_REVERSE NEXT * | CHARACTER
    GEB_ID NEXT * | CHARACTER
    GEOMETRY DERIVED * COLUMN OBJECT
    *** Felder in GEOMETRY
    SDO_GTYPE NEXT * | CHARACTER
    SDO_SRID CONSTANT
    Wert ist '31468'
    SDO_ELEM_INFO DERIVED * VARRAY
    Abschlusszeichenfolge : '|/'
    *** Felder in GEOMETRY.SDO_ELEM_INFO
    X FIRST * | CHARACTER
    *** Feldende in GEOMETRY.SDO_ELEM_INFO
    SDO_ORDINATES DERIVED * VARRAY
    Abschlusszeichenfolge : '|/'
    *** Felder in GEOMETRY.SDO_ORDINATES
    X FIRST * | CHARACTER
    *** Feldende in GEOMETRY.SDO_ORDINATES
    *** Feldende in GEOMETRY
    Tabelle SURFACE_GEOMETRY:
    100 Zeilen erfolgreich geladen.
    0 Zeilen aufgrund von Datenfehlern nicht geladen.
    0 Zeilen nicht geladen, da alle WHEN-Klauseln fehlerhaft waren.
    0 Zeilen nicht geladen, da alle Felder NULL waren.
    Zugewiesener Bereich für Bind-Array: 232576 Bytes (64 Zeilen)
    Byte in Lese-Puffer: 1048576
    Gesamtzahl der übersprungenen logischen Datensätze: 0
    Gesamtzahl der gelesenen logischen Datensätze: 100
    Gesamtzahl der abgelehnten logischen Datensätze: 0
    Gesamtzahl der zurückgewiesenen logischen Datensätze: 0
    Lauf begonnen am Fr Mai 28 15:16:43 2010
    Lauf beendet am Fr Mai 28 15:16:43 2010
    Abgelaufene Zeit: 00:00:00.19
    CPU-Zeit: 00:00:00.01
    Edited by: user9338988 on 28.05.2010 06:21

    sorry, wrong forum. I opened the thread in forum "Export/Import/SQL-Loader & External Tables"

Maybe you are looking for

  • Sony A7II blue "halo" on LCD.

    Hey guys, just updated to firmware on my Sony A7II to 1.20 (from 1.10) and I'm noticing something really strange that I've never seen before. My LCD screen now has this odd blue square taking up the entire center of the screen. I took a pic with my p

  • Blue tooth question

    I use a macbook white 2007 with OS X 10.7.5 When I click the bluetooth symbol in the pagetop and open Bluetooth Preferences, and click Advanced I find a few questions about waking up outoff sleepingtime. Wright under them I find Serial Ports with whi

  • ZFS M&M with Dell Server Hardware and OpenManage

    Hi there, Has anybody had any experience with using ZFS to provide hardware alerts for Dell servers running OpenManage? Also with trapping Backup Exec and Solaris alerts? Cheers, Dave

  • Spanish advanced payments HR Portal

    Hello everybody! I'm looking for information about advanced payments (for Spain) for a HR Portal. I'm quite new in Portal and I don't have idea of HR... very good e anyway I have been checking some standard portal application to find this option whic

  • I accidentally made my "File, Edit, Favorites, etc" toolbar disappear. How do I get it back?

    I accidentally made my "File, Edit, Favorites" etc. toolbar disappear. How do I get it back?