Problem with file association in midnight commander

i want to open jpg files with gpicview isntead of feh in midnight commander, i read that i have to edit the file: /etc/mc/mc.ext
in the part that say type/^JPEG
i wrote
#Include=image-options
Open=gpicview %f
i restart mc but nothing happen it still open the jpg files with feh, what im doing wrong?
cheers

try this
type/^JPEG
Include=its
include/its
Open=/usr/bin/gpicview %f
View=/usr/bin/gpicview %f
make its anything you want

Similar Messages

Problem with file association

I have read on this forum that people have problem with the file association when they haved installed StarOffice 8. I have the same problem.
I install StarOffice on a computer as network administrator - every thing looks fine. When i then log off and log on as a usual user the file association for MS Office files (.doc, .xls, .ppt) are gone. I will not have the users to change the file association by their own because they don't know how to do.
I know we have the same problem when we first install StarOffice 7. I got a register hack that changed the association. Now i have tried to change the path's in the registerhack and run it again - but it wont work for SO8. :(
Is there anyone out here who know a solution for this problem?
As i mention earlier I have seen many people in the forum with the same problem - but I haven't seen a solution for it.
// Stefan

I came across the same problem on windows XP SP2 machines.
I created a registry key that forces the file associations as follows:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.doc\shell]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.doc\shell\open]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.doc\shell\open\command ]
@="\"C:\\Program Files\\Sun\\StarOffice 8\\program\\soffice.exe\" \"%1\""
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.xls\shell]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.xls\shell\open]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.xls\shell\open\command ]
@="\"C:\\Program Files\\Sun\\StarOffice 8\\program\\soffice.exe\" \"%1\""
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.ppt\shell]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.ppt\shell\open]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.ppt\shell\open\command ]
@="\"C:\\Program Files\\Sun\\StarOffice 8\\program\\soffice.exe\" \"%1\""

Problem with file association in Photoshop

I am using Adobe Photoshop CS4, and I also have Adobe After Effects on my computer (which I don't use). For some reason, when I click on a photograph in Adobe Bridge, the After Effects program opens, but the photo I want to open in Photoshop does not open. I have reset the file associations in Photoshop, but Bridge ignores the settings and will only open After Effects. How can I prevent this and return to having Photoshop open my photographs?
Thank you for your help.

Might try posting in the Bridge forum.
If you're runign a Macinotsh, you an trash the bridge.plist but that's not always a good idea so don't do that till you know there's no better answer.

Problem with file vault

One of the desktops on my macbook 2007 steel case will not open.
The message i get on screen at login is that there is a problem with file vault.
my dissertation is on that desktop.
all other desktops/user accounts are unaffected and i have admin permissions on them
i recently upgraded to osx 10.9.4
how can i get back in?
chaiman 22

If you restored the account to which the FileVault protected Home folder belonged, then you need to log into that account and enable FileVault.
If you just need access to the data in the FV protected Home folder, then locate the sparsebundle disc image file that contains the encrypted folder. Double-click on it as if to mount it. You will then need to enter the FV password associated with the account to gain access (this is NOT the admin nor login password.)

Problem with file descriptors not released by JMF

Hi,
I have a problem with file descriptors not released by JMF. My application opens a video file, creates a DataSource and a DataProcessor and the video frames generated are transmitted using the RTP protocol. Once video transmission ends up, if we stop and close the DataProcessor associated to the DataSource, the file descriptor identifying the video file is not released (checkable through /proc/pid/fd). If we repeat this processing once and again, the process reaches the maximum number of file descriptors allowed by the operating system.
The same problem has been reproduced with JMF-2.1.1e-Linux in several environments:
- Red Hat 7.3, Fedora Core 4
- jdk1.5.0_04, j2re1.4.2, j2sdk1.4.2, Blackdown Java
This is part of the source code:
// video.avi with tracks audio(PCMU) and video(H263)
String url="video.avi";
if ((ml = new MediaLocator(url)) == null) {
Logger.log(ambito,refTrazas+"Cannot build media locator from: " + url);
try {
// Create a DataSource given the media locator.
Logger.log(ambito,refTrazas+"Creating JMF data source");
try
ds = Manager.createDataSource(ml);
catch (Exception e) {
Logger.log(ambito,refTrazas+"Cannot create DataSource from: " + ml);
return 1;
p = Manager.createProcessor(ds);
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Failed to create a processor from the given url: " + e);
return 1;
} // end try-catch
p.addControllerListener(this);
Logger.log(ambito,refTrazas+"Configure Processor.");
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured))
Logger.log(ambito,refTrazas+"Failed to configure the processor.");
p.close();
p=null;
return 1;
Logger.log(ambito,refTrazas+"Configured Processor OK.");
// So I can use it as a player.
p.setContentDescriptor(new FileTypeDescriptor(FileTypeDescriptor.RAW_RTP));
// videoTrack: track control for the video track
DrawFrame draw= new DrawFrame(this);
// Instantiate and set the frame access codec to the data flow path.
try {
Codec codec[] = {
draw,
new com.sun.media.codec.video.colorspace.JavaRGBToYUV(),
new com.ibm.media.codec.video.h263.NativeEncoder()};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
Logger.log(ambito,refTrazas+"The processor does not support effects.");
} // end try-catch CodecChain creation
p.realize();
if (!waitForState(p.Realized))
Logger.log(ambito,refTrazas+"Failed to realize the processor.");
return 1;
Logger.log(ambito,refTrazas+"realized processor OK.");
/* After realize processor: THESE LINES OF SOURCE CODE DOES NOT RELEASE ITS FILE DESCRIPTOR !!!!!
p.stop();
p.deallocate();
p.close();
return 0;
// It continues up to the end of the transmission, properly drawing each video frame and transmit them
Logger.log(ambito,refTrazas+" Create Transmit.");
try {
int result = createTransmitter();
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Create Transmitter.");
return 1;
} // end try-catch transmitter
Logger.log(ambito,refTrazas+"Start Procesor.");
// Start the processor.
p.start();
return 0;
} // end of main code
* stop when event "EndOfMediaEvent"
public int stop () {
try {
/* THIS PIECE OF CODE AND VARIATIONS HAVE BEEN TESTED
AND THE FILE DESCRIPTOR IS NEVER RELEASED */
p.stop();
p.deallocate();
p.close();
p= null;
for (int i = 0; i < rtpMgrs.length; i++)
if (rtpMgrs==null) continue;
Logger.log(ambito, refTrazas + "removeTargets;");
rtpMgrs[i].removeTargets( "Session ended.");
rtpMgrs[i].dispose();
rtpMgrs[i]=null;
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Stoping:"+e);
return 1;
return 0;
} // end of stop()
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
Logger.log(ambito,refTrazas+"\nControllerEvent."+evt.toString());
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
Logger.log(ambito,refTrazas+"\nEvento EndOfMediaEvent.");
this.stop();
else if (evt instanceof ControllerClosedEvent)
Logger.log(ambito,refTrazas+"\nEvent ControllerClosedEvent");
close = true;
waitSync.notifyAll();
else if (evt instanceof StopByRequestEvent)
Logger.log(ambito,refTrazas+"\nEvent StopByRequestEvent");
stop =true;
waitSync.notifyAll();
Many thanks.

Its a bug on H263, if you test it without h263 track or with other video codec, the release will be ok.
You can try to use a not-Sun h263 codec like the one from fobs or jffmpeg projects.

When I open Firefox the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution in the forum but only for Windows based

When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
== This happened ==
Every time Firefox opened
== Two days ago, for no apparent reason.

In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library

Why would an error pop up saying the installer is damaged. The Installer can't open the package. There may be a problem with file ownership or permissions. when trying to install java 7?

why would an error pop up saying the installer is damaged. The Installer can’t open the package. There may be a problem with file ownership or permissions. when trying to install java 7?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Problem in file association and main-class in JWS

Hello , all
I have a problem in JWS with file association and main-class. I have a java application that has two entry classes, one is appmain.class that is required to launch from web, and the other is player.class that is required to launch when user double-click the .abc extension file.
In JWS 5.0+, there is a association element in JNLP syntax that can be used to make the file association with .abc extension. But how can I declare the main-class in JNLP file?
If I declare the application-desc element as <application-desc main-class="player">, the player.class will be launched from web. But if I declare it as <application-desc main-class="appmain">, the .abc extension wil be associated to the appmain.class.
Does anyone know how to solve this problem? Thank you for your kindly help.

One way is to define a third main that refers
to the other two, as appropriate. E.G. if the
web based main does not include -open as
its arguments, it is easy.class WebStartSpringboard {
/** Call web based main unless args include -open. */
public static void main(String[] args) {
    if (args[0].equals("-open") ) {
      OpenFileBasedClass.main(args);
    } else {
      WebBasedClass.main(args);
}Other measures might be taken for a situation
where the web based version does include a
-open argument.

Copy full file path+file name in Midnight Commander

Hi!
How can I copy a file's full path with the file name in Midnight Commander?
If I press Ctrl+Alt+Enter it's shows this to me in the command line but I can't copy this route.
If I mark a file with 'Insert' and than if I would like to paste this for example in Mousepad or any other text editor with Shift+Insert or Ctrl+V it isn't works.
(Relatively newbie sitting here so if the answer is complicated please write a step-by-step instruction )

Well,I did a lot of research on the internet and I found the best solution.
- choose the file,press 'Ctrl' + 'Shift' + 'Enter'
- after that you can see the full file path + the file name in the command line (bottom of the screen)
- Select the text with 'Shift' + 'Mouse Left Click' (drag it across the whole command)
- For copy the text, press 'Ctrl' + 'Insert'
- For paste, press 'Shift' + 'Insert'
This is still pretty damn slow,I wanted to do it with a single key combination while the file is selected but it looks impossible.
But at the same time I have started to use Ranger file manager which is also runs from terminal,extremely fast,easy to use and if I press 'Ctrl' + 'Insert' on a file it is copies the full path with the name of the file itself. Just perfect.
I won't mark the thread [SOLVED] because if anybody knows a better method for this in Midnight Commander (with a script or whatnot) maybe will write it down for us. I hope...

Problems with File Transfers Over Firewire 800

Problems with File Transfers Over Firewire 800.
Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
Any thoughts...
Dual 2.7 GHz PowerPC G5
Mac OSX 10.4.3
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.3)

Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.

Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

Unable to download from AppStore, updates,etc.Messages 'the installer is damaged' to 'there might be a problem with file ownership and permissions.' I am the owner and only user of a new MBP. What could be going on?

Is anyone having the same type of problems I'm having with Lion. I have a new MacBook Pro, received 7 weeks ago, preinstalled with Leopard 10.6.7. I didn't migrate anything from my old iMac, wanted a clean install from the Apple Store. While there, I asked for the upgrade to Lion 10.7, however their system was down.
I installed it myself, wirelessly about a week later, and Apple emailed me a receipt. Now, I've had to call support directly last week when I lost Mail, Address Book, was unable to open Preview or iTunes, among other problems. Seemed fixed after a session that baffled even the store tech. Now I am unable to download or install the recent Mac updates for Lion, from the App Store, could not install Adobe Reader, etc. Messages range from 'A network error has occured - Check your Internet connection and try again' to 'The Installer is damaged and cannot open the package. There may be a problem with file ownership or permissions.' All fail and I'll probably have to call Apple again. I am frustrated beyond words. Logs 'Install's runner tool is not properly configured as a setuid tool', domain errors, 'attempt to write a readonly database, and on and on. I have barely done a thing on this computer except search online for help with these problems. Safari gives me a 'You are not connected to the internet' too often. Diagnostics disagrees. I do see wi-fi problems in the forum. Disk and permissions were fine at the beginning of the earlier problems, checked first by support tech. I'm not sure if support tech even knew. I was just happy they were fixed. Anyone have these download and/or install problems after a 'clean bill of health' so to speak, only a week ago?

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Problem with File Based replication in Weblogic Express 10

Hi,
          We have Web application (exploded war) file deployed on Weblogic Express 10, to a Cluster of three Managed Servers (all three on different physical machines).
          We are using File based session persistance in weblogic.xml
          We have a shared location for all the three servers where we will be sharing the Session data.
          When we start the application, its works fine and is very fast, but after sometime the application slows down.
          Troubleshooting the Issue we found that its a problem with file based replication. By using File based replication every user session is stored in form of directory inside shared directory. So after sometime thousands of directories are created inside the shared directory where the session information is stored. So when we access the application, its waiting for lot of time with Message Session Monitor .... (this is because its browsing through the shared session storage directory for lot of time for session information as it has lot of directories) and finally after a long time like 10 mins we get the Application Home Page.
          When we clean up all the saved sessions inside shared directory, the application works fine, But we will see the same sometime later may be after 3 or 4 hours when the shared session directory has lot of session information stored in it.
          Is there a way to clean up the saved session information on file system as soon as that user session is closed by using file based replication.
          We cannot used Inmemory replication as our Appl doesnt support it.
          Please advice as it is a major show stopper in our Production Mirror env.
          Weblogic Consultant

It is possible to reduce number of live session by configuring very low timeout-secs weblogic.xml. Default is 60 minutes.
          More details are here..
          http://e-docs.bea.com/wls/docs100/webapp/weblogic_xml.html#wp1071982
          Jayesh
          Yagna Sys

Problem with file permissions

Hello all,
I am making a simple HttpServlet, which takes input
from html page and saves in to a file, but I'm having a
bit of a problem with file permissions.
I'm getting the following exception
java.security.AccessControlException: access denied (java.io.FilePermission ./data/result read)
     java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
     java.security.AccessController.checkPermission(AccessController.java:427)
     java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
     java.lang.SecurityManager.checkRead(SecurityManager.java:871)
     java.io.File.exists(File.java:700)
     SyksyHTTPServlet.doPost(SyksyHTTPServlet.java:31)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)The exception seems to occur when I'm trying to check whether the file already
exists or not.
The data directory has all permissions (read, write and execute) set for all users,
and I have made an empty file called result inside the data directory for testing.
This file has read and write permissions enabled for all users.
Here's my code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.Enumeration;
import java.util.List;
import java.util.ArrayList;
public class SyksyHTTPServlet extends HttpServlet
     public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          int totalCount = 0;
          List list;
          String song = request.getParameter("song");
          PrintWriter out = response.getWriter();
          File file = new File("./data/result");
          if(file.exists()) // this is line 31, which seems to cause the exception
               list = readFile(file);
          else
               file.createNewFile();
               list = new ArrayList();
          list.add(song);
          writeFile(file, list);
          for(int i = 0 ; i < list.size() ; i++)
               out.println(list.get(i));
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          doPost(request, response);
     private List readFile(File file)
          List list = null;
          try
               FileInputStream fis = new FileInputStream(file);
               ObjectInputStream ois = new ObjectInputStream(fis);
               list = (ArrayList)ois.readObject();
               ois.close();
          catch(Exception e)
               e.printStackTrace();
          return list;
     private void writeFile(File file, List list)
          try
               FileOutputStream fos = new FileOutputStream(file);
               ObjectOutputStream oos = new ObjectOutputStream(fos);
               oos.writeObject(list);
               oos.flush();
               oos.close();
          catch(Exception e)
               e.printStackTrace();
}I'm using Tomcat 5.5 on Ubuntu Linux, if that has anything to do with this.
I'll appreciate all help.
kari-matti

Hello again.
I'm still having problems with this. I made
a simple servlet that reads from and writes
to text file. The reading part work fine on my
computer, but the writing doesn't, not even
an exception is thrown if the file exists that
I'm trying to write to. If I try to create a new
file I'll get an exception about file permissions.
I also asked a friend of mine to try this same
servlet on his windows computer and it works
as it should.
Here's the code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class ReadServlet extends HttpServlet
     public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          String s = "";
          PrintWriter out = response.getWriter();
          String docroot = getServletContext().getRealPath( "/" );
          out.println("docroot: "+docroot);
          File file = new File(docroot+"test.txt");
          if(file.exists())
               s = readFile(file);
               out.println(s);
          else
               out.println("file not found");
               //file.createNewFile();                    // causes exception
               //out.println("new file created.");
          writeFile(file, "written by servlet");
          out.println("Now look in the file "+file.getPath());
          out.println("and see if it contains text 'written by servlet'");
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          doPost(request, response);
     private String readFile(File file)
          FileInputStream fis = null;
          BufferedInputStream bis = null;
          DataInputStream dis = null;
          String s = "";
          try
               fis = new FileInputStream(file);
               bis = new BufferedInputStream(fis);
               dis = new DataInputStream(bis);
               s = dis.readLine();
               fis.close();
               bis.close();
               dis.close();
          catch(Exception e)
               e.printStackTrace();
          return s;
     private void writeFile(File file, String s)
          FileOutputStream fos = null;
          BufferedOutputStream bos = null;
          DataOutputStream dos = null;
          try
               fos = new FileOutputStream(file);
               bos = new BufferedOutputStream(fos);
               dos = new DataOutputStream(bos);
               dos.writeChars(s);
               fos.flush();
               bos.flush();
               dos.flush();
               fos.close();
               bos.close();
               dos.close();
          catch(Exception e)
               e.printStackTrace();
}And if someone wants to test this servlet I can
give a war package.
Any advices?
kari-matti

Problem with file association in midnight commander

Similar Messages

Maybe you are looking for