Problem with file conversion from version 9.2.2 to version 10.1.0.71

Hello everyone.
I have a problem. In my database, i have a lot of artwork done with indesign 9.2.2. Since a while now I upgraded indesign and now I have the latest version 10.1.0.71 but I can't open my indesign artwork made with indesign 9.2.2.
When I try, a dialog box appear and says : " La conversion a échoué : les données du fichier ne correspondent pas aux données attendues".
What should I do ?
Thank you in advance

Hi,
Ideally all files created in 9.2.2 should open fine in versions greater than itself.
Did you happen to have some 3rd party plugin in 9.2.2 which is missing in 10.1 ? That can be one of the reasons for such errors.
Are the files still opening in version 9.2.2? (assuming you still have 9.2.2)
If there are no 3rd party plugins involved you can share the file with us at [email protected] and we can have a look and figure out the cause of the problem.
Regards
Javed

Similar Messages

Aspect ratio problem with Quicktime Conversion from FCE HD 3.5

I have a FCE 3.5 HDV project (16:9 aspect ratio) which I am trying to export using Quicktime Conversion for eventual web-streaming. I have tried various settings including "maintain aspect ratio" and the "letterbox" options. After every multi-hour attempt, the end result is just what I need, except the aspect ratio is always 4:3 and vertically squeezed.
What settings should I use for a small to medium sized version of my movie for streaming on a website, but in the correct aspect ratio? I'd prefer a 16:9 Quicktime frame, or at least a 4:3 Quicktime frame with black bars.

I too have been having some problems, same software. Export to iPod completely ignores the intended aspect ratio and is non-adjustable and squeezes the footage. It looks fine on the canvas but gets messed up on export. A 4:3 video that should be 640x480 ends up being 640x426, and a 16:9 video that should be 640x360 looks to be getting 640x426 as well.
Currently, my work-around is to export to DV file, then export to iPod. Being a double encoding, it is quite wasteful in terms of time and processing power. Is there something else I can do?

Problem with file share from iTunes to iPad - not enough memory

Hi
I've got iTunes (10.7.0.21) installed - latest version.
On my iPad I have an app - OpenSong. I need to transfer a number of files to this app throug Application - File share (don't know if this is the correct description, I use a Danish version).
I want to add around 750 small files (1-3 kb) to the iPad. The problem is that it only will copy around 30-60 files at a time before iTunes comes with a box indication that the program encountered a problem and cannot copy the file xxxxx. "Not enough availabel memory".
I then have to close iTunes and continue from where I came to. If i don't, that is I try to copy again, iTunes frequently crashes.
iPad 3, 64 GB - plenty of free memory
Win 7, 4 GB RAM, plenty of free disc space. Windows and iTunes fully updated.
Anyone got an idea? Or how do I report this to Apple?

Hi Damse,
I have the same problem. I also have about the same number of small files to transfer to the iPad. The point at which the transfer through iTunes to the iPad varies within the range you describe. I also have taken to loading in as many files as I can, integrating them into the applicatiom, ejecting the iPad, and stopping and starting iTunes again and repeating the process.
Best regards,
Bob Charest

Problem with files created from a template

I've never had this problem before and I can't seem to figure
out how to fix it. I have DW 8 and we've created a new website, and
we have a root cfm template named root.dwt.cfm. Everything works as
normal when you're editing code in the template, but when you go to
edit code in a file you created from the template, all the text is
black and it doesn't offer code hints or anything. It's like it
doesn't know what type of file it is or something? This is the
first template I've created in DW 8, so is this some sort of bug?
Is there anything I can try to check to figure out what's going on?
I'm at a loss.
Thanks!!!
Holli

Show me one of these pages, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Wolli World" <[email protected]> wrote in
message
news:e35f95$aft$[email protected]..
> I've never had this problem before and I can't seem to
figure out how to
> fix
> it. I have DW 8 and we've created a new website, and we
have a root cfm
> template named root.dwt.cfm. Everything works as normal
when you're
> editing
> code in the template, but when you go to edit code in a
file you created
> from
> the template, all the text is black and it doesn't offer
code hints or
> anything. It's like it doesn't know what type of file it
is or something?
> This is the first template I've created in DW 8, so is
this some sort of
> bug?
> Is there anything I can try to check to figure out
what's going on? I'm
> at a
> loss.
>
> Thanks!!!
> Holli
>

Problem with files converted from m4a to mp3

Here's what happened: I recorded the a in Garageband, exported it to disk then to iTune & converted it to MP3 as I usually do to distribute my demos. The MP3 files works fine on iTune on my iMac but when I downloaded it to my PC and tried to play it on WMP, all it did was jump.
I actually upgraded iTunes & other Mac softwares lately... Could this be the reason why the MP3 converter won't work ?

greg-
thanks. yes, i think that's what has been so tricky about this. i add a link to an mp3 in blogger, but feedburner doesn't add this particular show as an enclosure, so it's not updating in the feed. can't seem to find where the origin of the problem, though...is it blogger, feedburner, or the mp3 file or...?
charlie

Problems with image conversion from InDesign to PDF

My images look posterized when I convert from InDesign to PDF. Any ideas about this?

That'd be in the export settings not in Reader. Ask in the InDesign forum, they'll probably know better.

Problem with File Content Conversion

Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PM

You will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Unable to download from AppStore, updates,etc.Messages 'the installer is damaged' to 'there might be a problem with file ownership and permissions.' I am the owner and only user of a new MBP. What could be going on?

Is anyone having the same type of problems I'm having with Lion. I have a new MacBook Pro, received 7 weeks ago, preinstalled with Leopard 10.6.7. I didn't migrate anything from my old iMac, wanted a clean install from the Apple Store. While there, I asked for the upgrade to Lion 10.7, however their system was down.
I installed it myself, wirelessly about a week later, and Apple emailed me a receipt. Now, I've had to call support directly last week when I lost Mail, Address Book, was unable to open Preview or iTunes, among other problems. Seemed fixed after a session that baffled even the store tech. Now I am unable to download or install the recent Mac updates for Lion, from the App Store, could not install Adobe Reader, etc. Messages range from 'A network error has occured - Check your Internet connection and try again' to 'The Installer is damaged and cannot open the package. There may be a problem with file ownership or permissions.' All fail and I'll probably have to call Apple again. I am frustrated beyond words. Logs 'Install's runner tool is not properly configured as a setuid tool', domain errors, 'attempt to write a readonly database, and on and on. I have barely done a thing on this computer except search online for help with these problems. Safari gives me a 'You are not connected to the internet' too often. Diagnostics disagrees. I do see wi-fi problems in the forum. Disk and permissions were fine at the beginning of the earlier problems, checked first by support tech. I'm not sure if support tech even knew. I was just happy they were fixed. Anyone have these download and/or install problems after a 'clean bill of health' so to speak, only a week ago?

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

Problem with file permissions using Snow Lepord

I'm having problems with file Sharing & Permissions using Snow Lepord.
When I save any new file it only has 'Read & Write' privileges for the user, everyone else is 'read only' or 'no access'.
We have a Netgear NAS Server which is accessed by other users over the local network and if I change the Privilege to 'read & write' via Get Info and then copy the file from my desktop to ther server it changes the Privilege of the server version to 'no access' we then have to change it again for it to work.
I also created a new folder on the server and now it says 'no access' and has a no entry icon!
Any ideas???

We have issues like this. Have tried running AFP and SMB, now connecting using CIFS. All have the same problem. I can work on one or two files fine, then suddenly, one of the files I just worked on says I don't have permissions. I log off the server and log back on, and then I have permissions to the file. It will work fine for one or two operations, then fails. We just updated to OSX Mavericks and a Windows 2012 server, but have been having this issue for years. My permissions look fine. I can even change permissions, but it won't let me work on the file or move or delete the file or rename the file. Once I log out and log back in, I can do anything I want.

Problems with Gmail in Firefox version 20.0.1.

I never had any problems with Gmail before this version. Now when I want to compose a new message the compose window and home page will turn into an empty white browser window. It is titled as if it were the inbox, but there are no links or words appearing in the window. I cannot type in this window either. So I am unable to send email from my desktop.
Also, I can only read new messages. When I try to read older messages I'd saved for information purposes, I can no longer open those.

Google has been tinkering with the design of Gmail lately, which raises the possibility that Firefox may be mismatching old cached files with new ones, or sending the site cookies that correspond to an older design.
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove your google.com cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
That will open a dialog where you can remove the individual cookies.
Then try reloading the page and logging in again. Does that help?

Problems with File Transfers Over Firewire 800

Problems with File Transfers Over Firewire 800.
Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
Any thoughts...
Dual 2.7 GHz PowerPC G5
Mac OSX 10.4.3
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.3)

Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.

Problem with date format from Oracle DB

Hi,
I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
I have changing the field settings in DataSource to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
Thanks in advance.
Regards
Varada

Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
The issue again in detail
I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
The problem is, I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
Regards
Varada

Problem with file conversion from version 9.2.2 to version 10.1.0.71

Similar Messages

Maybe you are looking for