Problem with file system logging in Solaris7

Hi,
Solaris7 by default provides filesystem logging option. I mount a filesystem with "-o logging" option and then crash the filesystem. Next time i am able to mount the same filesystem without having to do an fsck.
But the same does not happen if i mount the filesystem with mount(2) system call with the flag MNTOPT_LOGGING. Sample code is below
--------------Ex code ---------------
struct ufs_args ufs_mount;
ufs_mount.flags = UFSMNT_LARGEFILES|UFSMNT_LOGGING;
length = sizeof(ufs_mount);
mount(dev,mntpoint[i],MS_DATA,filesys,(char *)&ufs_mount,length);
I could avoid this by following the below steps:
1. mount the required filesystem with mount(1) command
mount -o logging /dev/dsk/c1t5d0s0 /mnt
2. Do some activity on it. ex cp,rm and then unmount.
3. Now use the mount(2)system call and mount the filesystem(above prog).
After following these steps even if the filesystem crashed it can be mounted next time with the mount(2) system call without an fsck(1).
I have also observed that a filesystem mounted using mount(2) call very frequently gives a "ufs log error , errno = 5" and needs an fsck after very few crashes.
I have tried this on both 32 & 64 bit Solaris7.
thanks in advance,
rakesh.

Similar Messages

Problem withe file system repository

I configured a windows file system to the portal.
And the folder is showing well in the KM content.(along with its content) which is fine.
Now when i am trying to edit the file (by clicking on the 'Edit Locally' ) it is not responding and a message like operation failed is appearing.
NOTE: The Windows folder has given the full permissions.
The folder in theKM was also given full permissions to user.
can any one help me.
Thanks in advance,
Mr.Chowday

Hi
check this
Internet Explorer settings:
Regardless of whether you are using ActiveX or the Applet, you have to make ActiveX settings in the browser (Internet Explorer) in order to use the Edit Locally function.
Call up the security settings for the browser: Choose Tools ® Internet Options ® Security ® Custom Level in the menu bar. Make the following settings
Download signed ActiveX controls = Enable
Download unsigned ActiveX controls = Disable
Initialize and script ActiveX controls not marked as safe = Disable
Run ActiveX controls and plug-ins = Enable
Script ActiveX controls marked safe for scripting = Enable
and also If you are using the repository in read-only mode, the creating, changing, renaming, and deleting of files and directories is not supported.
http://help.sap.com/saphelp_nw04/helpdata/en/a6/181b09bcc7fe4389c8c17d2ad849cc/content.htm
Regards
Krishna.

Problem with File System Repository after release change

Hello,
we have been changing the Portal release from EP 6.0 to SAP NetWeaver Portal 7.0 SP17. The OS of the host is Windows 2003 Server.
If I open the component monitor to watch the repostitories, the state of the file system repositories are red and a error message occurred:
Startup Error: getting mapped math - Logon failure: unknown user name or bad password
I checked the logon credentials....they are ok. Also I checked the access from the Portalhost to the Windows File System....it´s ok too.
In our previous portal release the FSR were ok!!
Is there a difference between the file system repository configuration in portal 6.0 and portal 7.0?
Thanks and regards
Tom

Hello Hussain,
I have checked the username and the password of the user who have full access on the Windows file system, but the same error occurred. In the Network Path we have configured a domain user for the file system access. Here is the configuration of the network path:
Name: Test
Description: Test
Networkpath:
Host\share
Password: ****
Re-enter Password: ****
User: domain\user
Here the configuration of the repository:
Name: Test
Description: Test
Prefix: /Test
Lookup Mode: caseless
Root Directory:
Host\share
Repository Services: Nothing
Property Search Manager: com.sapportals.wcm.repository.manager.generic.search.SimpleManagerSearchManager
Security Manager: AclSecurityManager
ACL Manager Cache: ca_cm_rep_acl
Windows Landscape System: Microsoft_Windows_KM
Read only: unchecked
Could it be that I need a user mapping for the access of the windows file system?
Perhaps the configuration of the Windows Landscape System is wrong?
regards
Tom

Problems with file system functions

I've been using CLibInit.supplyFile( ); to feed files to the
C code to work with. My code looks like:
//in Flash:
cLibInit.supplyFile("./myfile", _myFileByteArray);
if ( !access (file, R_OK) )
// later:
if ( (handle = open (file,O_RDONLY ) == -1)
printf (" couldn't open %s\n",file);
return;
The access test passes, signalling that the file exists and
everything is well. BUT, the open fails with a "File or directory
does not exist" error.
I tinkered around some, and noticed that the open() works
when I removed the access() call. Similarly, if I put the open in
front of the acess, the open succeeds, but the access fails. This
makes me think that supplyFile might be "one use," meaning that the
library 'forgets' the file once a system call accesses it. Is that
the case? If so, it's truly bizarre functionality! But it's very
possible that I'm missing some nuance of the UNIX system libs...
:)

Is it possible to open file in C?
I tried to open file but it makes error "Can not Open File "
// in fileread.c
static AS3_Val fileread2(void* self, AS3_Val args)
char* val = NULL;
AS3_ArrayValue( args, "StrType", &val );
char result[256];
FILE *fp1;
char s[256];
if((fp1=fopen(val,"r"))==NULL)
sprintf(result,"Can not Open File : %s", val);
return AS3_String(result);
while(fgets(s,256,fp1)!=NULL) {
sprintf(result,"_%s",s);
fclose(fp1);
return AS3_String(result);
int main() {
AS3_Val fileread2Val = AS3_Function( NULL, fileread2 );
AS3_Val result = AS3_Object( "fileread2: AS3ValType",
fileread2Val );
AS3_Release( fileread2Val );
AS3_LibInit( result );
return 0;
// In fileread.as
import cmodule.fileread2.CLibInit;
private function init():void
var loader:CLibInit = new CLibInit;
var lib:Object = loader.init();
//trace(lib.fileread2("_ReadMe.txt"));
var arr:ByteArray = new ByteArray();
loader.supplyFile("_ReadMe.txt", arr);
trace("Array : " + arr);
}

Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

New WIN7 System, FFox gives error "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory" - will not go to any site.

New Windows 7 computer. After installing Firefox, every time I bring it up I get the following message:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
Then Firefox comes up, but will not function at all - can enter url address, but will not respond to ANY clicks, so can not go to any site.

This link shows how to fix this - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

Unable to download from AppStore, updates,etc.Messages 'the installer is damaged' to 'there might be a problem with file ownership and permissions.' I am the owner and only user of a new MBP. What could be going on?

Is anyone having the same type of problems I'm having with Lion. I have a new MacBook Pro, received 7 weeks ago, preinstalled with Leopard 10.6.7. I didn't migrate anything from my old iMac, wanted a clean install from the Apple Store. While there, I asked for the upgrade to Lion 10.7, however their system was down.
I installed it myself, wirelessly about a week later, and Apple emailed me a receipt. Now, I've had to call support directly last week when I lost Mail, Address Book, was unable to open Preview or iTunes, among other problems. Seemed fixed after a session that baffled even the store tech. Now I am unable to download or install the recent Mac updates for Lion, from the App Store, could not install Adobe Reader, etc. Messages range from 'A network error has occured - Check your Internet connection and try again' to 'The Installer is damaged and cannot open the package. There may be a problem with file ownership or permissions.' All fail and I'll probably have to call Apple again. I am frustrated beyond words. Logs 'Install's runner tool is not properly configured as a setuid tool', domain errors, 'attempt to write a readonly database, and on and on. I have barely done a thing on this computer except search online for help with these problems. Safari gives me a 'You are not connected to the internet' too often. Diagnostics disagrees. I do see wi-fi problems in the forum. Disk and permissions were fine at the beginning of the earlier problems, checked first by support tech. I'm not sure if support tech even knew. I was just happy they were fixed. Anyone have these download and/or install problems after a 'clean bill of health' so to speak, only a week ago?

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Problem with file descriptors not released by JMF

Hi,
I have a problem with file descriptors not released by JMF. My application opens a video file, creates a DataSource and a DataProcessor and the video frames generated are transmitted using the RTP protocol. Once video transmission ends up, if we stop and close the DataProcessor associated to the DataSource, the file descriptor identifying the video file is not released (checkable through /proc/pid/fd). If we repeat this processing once and again, the process reaches the maximum number of file descriptors allowed by the operating system.
The same problem has been reproduced with JMF-2.1.1e-Linux in several environments:
- Red Hat 7.3, Fedora Core 4
- jdk1.5.0_04, j2re1.4.2, j2sdk1.4.2, Blackdown Java
This is part of the source code:
// video.avi with tracks audio(PCMU) and video(H263)
String url="video.avi";
if ((ml = new MediaLocator(url)) == null) {
Logger.log(ambito,refTrazas+"Cannot build media locator from: " + url);
try {
// Create a DataSource given the media locator.
Logger.log(ambito,refTrazas+"Creating JMF data source");
try
ds = Manager.createDataSource(ml);
catch (Exception e) {
Logger.log(ambito,refTrazas+"Cannot create DataSource from: " + ml);
return 1;
p = Manager.createProcessor(ds);
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Failed to create a processor from the given url: " + e);
return 1;
} // end try-catch
p.addControllerListener(this);
Logger.log(ambito,refTrazas+"Configure Processor.");
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured))
Logger.log(ambito,refTrazas+"Failed to configure the processor.");
p.close();
p=null;
return 1;
Logger.log(ambito,refTrazas+"Configured Processor OK.");
// So I can use it as a player.
p.setContentDescriptor(new FileTypeDescriptor(FileTypeDescriptor.RAW_RTP));
// videoTrack: track control for the video track
DrawFrame draw= new DrawFrame(this);
// Instantiate and set the frame access codec to the data flow path.
try {
Codec codec[] = {
draw,
new com.sun.media.codec.video.colorspace.JavaRGBToYUV(),
new com.ibm.media.codec.video.h263.NativeEncoder()};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
Logger.log(ambito,refTrazas+"The processor does not support effects.");
} // end try-catch CodecChain creation
p.realize();
if (!waitForState(p.Realized))
Logger.log(ambito,refTrazas+"Failed to realize the processor.");
return 1;
Logger.log(ambito,refTrazas+"realized processor OK.");
/* After realize processor: THESE LINES OF SOURCE CODE DOES NOT RELEASE ITS FILE DESCRIPTOR !!!!!
p.stop();
p.deallocate();
p.close();
return 0;
// It continues up to the end of the transmission, properly drawing each video frame and transmit them
Logger.log(ambito,refTrazas+" Create Transmit.");
try {
int result = createTransmitter();
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Create Transmitter.");
return 1;
} // end try-catch transmitter
Logger.log(ambito,refTrazas+"Start Procesor.");
// Start the processor.
p.start();
return 0;
} // end of main code
* stop when event "EndOfMediaEvent"
public int stop () {
try {
/* THIS PIECE OF CODE AND VARIATIONS HAVE BEEN TESTED
AND THE FILE DESCRIPTOR IS NEVER RELEASED */
p.stop();
p.deallocate();
p.close();
p= null;
for (int i = 0; i < rtpMgrs.length; i++)
if (rtpMgrs==null) continue;
Logger.log(ambito, refTrazas + "removeTargets;");
rtpMgrs[i].removeTargets( "Session ended.");
rtpMgrs[i].dispose();
rtpMgrs[i]=null;
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Stoping:"+e);
return 1;
return 0;
} // end of stop()
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
Logger.log(ambito,refTrazas+"\nControllerEvent."+evt.toString());
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
Logger.log(ambito,refTrazas+"\nEvento EndOfMediaEvent.");
this.stop();
else if (evt instanceof ControllerClosedEvent)
Logger.log(ambito,refTrazas+"\nEvent ControllerClosedEvent");
close = true;
waitSync.notifyAll();
else if (evt instanceof StopByRequestEvent)
Logger.log(ambito,refTrazas+"\nEvent StopByRequestEvent");
stop =true;
waitSync.notifyAll();
Many thanks.

Its a bug on H263, if you test it without h263 track or with other video codec, the release will be ok.
You can try to use a not-Sun h263 codec like the one from fobs or jffmpeg projects.

Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

Problem with File Based replication in Weblogic Express 10

Hi,
          We have Web application (exploded war) file deployed on Weblogic Express 10, to a Cluster of three Managed Servers (all three on different physical machines).
          We are using File based session persistance in weblogic.xml
          We have a shared location for all the three servers where we will be sharing the Session data.
          When we start the application, its works fine and is very fast, but after sometime the application slows down.
          Troubleshooting the Issue we found that its a problem with file based replication. By using File based replication every user session is stored in form of directory inside shared directory. So after sometime thousands of directories are created inside the shared directory where the session information is stored. So when we access the application, its waiting for lot of time with Message Session Monitor .... (this is because its browsing through the shared session storage directory for lot of time for session information as it has lot of directories) and finally after a long time like 10 mins we get the Application Home Page.
          When we clean up all the saved sessions inside shared directory, the application works fine, But we will see the same sometime later may be after 3 or 4 hours when the shared session directory has lot of session information stored in it.
          Is there a way to clean up the saved session information on file system as soon as that user session is closed by using file based replication.
          We cannot used Inmemory replication as our Appl doesnt support it.
          Please advice as it is a major show stopper in our Production Mirror env.
          Weblogic Consultant

It is possible to reduce number of live session by configuring very low timeout-secs weblogic.xml. Default is 60 minutes.
          More details are here..
          http://e-docs.bea.com/wls/docs100/webapp/weblogic_xml.html#wp1071982
          Jayesh
          Yagna Sys

Problem with file vault

One of the desktops on my macbook 2007 steel case will not open.
The message i get on screen at login is that there is a problem with file vault.
my dissertation is on that desktop.
all other desktops/user accounts are unaffected and i have admin permissions on them
i recently upgraded to osx 10.9.4
how can i get back in?
chaiman 22

If you restored the account to which the FileVault protected Home folder belonged, then you need to log into that account and enable FileVault.
If you just need access to the data in the FV protected Home folder, then locate the sparsebundle disc image file that contains the encrypted folder. Double-click on it as if to mount it. You will then need to enter the FV password associated with the account to gain access (this is NOT the admin nor login password.)

Problem with FIle Adapter

Hi
We r facing typical problem with file adapter.
Lets say there are 30 files to be processed by placing an copy in arichive folder by file adapter based on pooling
parameters.
All the 30 files are picked up and we can see the copies in archive folder.
But when we go to RWB and check the audit log,
there we could see only 25 files , the 5 files are missing.
no trace found therre about the 5 files.
This is happening only some times and not to all the files placed in the FTP. Later when the same file is placed back from the Archive folder to the Source folder, the file is being picked and processed succesfully.
unfortunately this is happening on Production server
Any pointers which could trouble shoot this issue.
Regards
shekar chandra

Hi,
Couple of thing which you can try....
1. Use EOIO QoS and check if you still face the issue.
Is some program or application writing files to the directory? If yes I would recommend the use of a temporary name to write the files and then rename them.
Sometimes when an external application connects via FTP and transfers the files...
The file could be picked up by the adapter poll even before the transfer of data is done.
Which is why you will find that the file is archived but there is no xml message created for the same in the Integration engine.
Try increasing the poll interval. This helps sometimes.
Regards,
Sidharth

Problem with file access in other computer in jsp

I have problem with file accessing in other computer in jsp.
The follow code
File folder=new File("Z:"+File.separator+"sharefolder");//Z is a net share driver
File[] files=folder.listFiles();
System.out.println("test");
System.out.println("length="+files.length);
will throw exception at the second print.
but it works well in main funtion.
Is anybody know what is the problem.
JSP works on windows2003 server,tomcat 5.0.28 JDK1.4 net share folder on windows2000 server

no error code for this.But when I start tomcat I get the follow error.
java.lang.IllegalArgumentException: Document base Z:\ does not exist or is not a readable directory
     at org.apache.naming.resources.FileDirContext.setDocBase(FileDirContext.java:138)
     at org.apache.catalina.core.StandardContext.resourcesStart(StandardContext.java:3910)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4138)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
     at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
     at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
     at org.apache.commons.digester.Rule.end(Rule.java:276)
     at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
     at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at org.apache.commons.digester.Digester.parse(Digester.java:1567)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
     at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
     at org.apache.catalina.core.StandardService.start(StandardService.java:480)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Error in resourceStart()
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Error getConfigured
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Exception during cleanup after start failed
LifecycleException: Container StandardContext[msgstore] has not been started
     at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4466)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4371)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
     at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
     at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
     at org.apache.commons.digester.Rule.end(Rule.java:276)
     at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
     at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at org.apache.commons.digester.Digester.parse(Digester.java:1567)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
     at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
     at org.apache.catalina.core.StandardService.start(StandardService.java:480)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)

NT security problems with file I/O

I have 2 problems with file I/O. When I read from a file I use the getAbsolutePath() method that is part of the File class to find what directory the files are currenlty. The problem is that the returned path says that the file is on the desktop no matter what directory the file really is in. The second problem is that I am unable to save files anywhere but the desktop. I must run the class files from the desktop too to get it to work.
I am using NT 4.0 for development. I'm guessing that these problems might be NT security related. Could someone help me?
Code below:
import java.awt.*;
import java.applet.*;
import java.net.*;
import java.io.File;
import java.awt.event.*;
//import java.security.*;
//import sun.security.*;
//import java.awt.Window;
//import com.ms.security.*;
public class Edit extends Applet implements ActionListener, ItemListener
String Gselect;
reader readit;
int mhz, khz;
TextField textField1;
String freq = "000.000";
String data;
Choice freqC;
Button ActivateB, SaveB, /*CancelB, HelpB,*/ DeleteB;
Checkbox SetC;
int NotUsedReply[] = new int[200];
int HwListReply[] = new int[200];
public void init()
readit = new reader();
String myFile="satellite.st1";
// myFile = myFile.concat(Gselect);
File satellite = new File(myFile);
textField1 = new TextField();
textField1.setText( "(void) " );
add( textField1 );
SetC = new Checkbox("TRAP-RX");
add(SetC);
SetC.addItemListener(this);
freqC = new Choice();
freqC.setSize(20,50);
freqC.add("000.000");
add(freqC);
freqC.addItemListener(this);
ActivateB = new Button("Activate");
add(ActivateB);
ActivateB.addActionListener(this);
SaveB = new Button("Save");
add(SaveB);
SaveB.addActionListener(this);
DeleteB = new Button("Delete");
add(DeleteB);
DeleteB.addActionListener(this);
     /*CancelB = new Button("Cancel");
add(CancelB);
CancelB.addActionListener(this);
     HelpB = new Button("Help");
add(HelpB);
HelpB.addActionListener(this);*/
//textField1.setText( data );
for(int a = 1; a < 9; a++)
data = readit.getData(satellite.getAbsolutePath(), a);//("E:\\forte4j\\system\\Projects\\Zebra\\satellite.st1", a);
freqC.addItem(data);
textField1.setText(satellite.getAbsolutePath() );
public void paint(Graphics g)
//g.drawString("Radio Setup Files",20, 20);
//g.drawString(getParameter("wse"),20, 20);
public void actionPerformed(ActionEvent event)
if(event.getSource() == ActivateB)
activator();
if(event.getSource() == SaveB)
/*if(event.getSource() == CancelB)
stop();
if(event.getSource() == HelpB)
if(event.getSource() == DeleteB)
public void itemStateChanged(ItemEvent e)
if(e.getItemSelectable() == SetC)
textField1.setText("Check box 1 clicked!");
if(e.getItemSelectable() == freqC)
freq = ((Choice)e.getItemSelectable()).getSelectedItem();
public void activator()
makeMHZ();
makeKHZ();
if(mhz > 254)
int StartLink[]={0x0c,0x01,0x07,0x00,0x00,0x00,0x00,0x00,0x00};          //New Link Proc Start
int TrapConfig[]={0x25,0x80,0x00,0x00,0x00,0xb7,0x00,0x0c,0x0b,          //TRAP Configuration
0x00,0x00,0x00,0xff,0xa0,0xff,0x0d,0xff,0xe8,
0xff,0x0d,0xff,0x00,0xff,0x15,0xff,0xb0,0xff,
0xff,0xff,0x94,0x0a,0x01,0x06,0x1a,0x00,0x0d,
0x2d,0x21};
TrapConfig[11]=(mhz-255);
TrapConfig[12]=(khz/5);
int SetUserOutput[]={0x41,0x42,0x49,0x54,0x52,0x41,0x50,0x20,0x34, //Sets User Output Format
0x35,0x34,0x35,0x30,0x30,0x2e,0x30,0x4e,0x30,
0x38,0x32,0x34,0x35,0x30,0x30,0x2e,0x30,0x57,
0x30,0x31,0x30,0x30,0x2e,0x30,0x30,0x4b,0x4d,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00};
sendget CmdFunc;
CmdFunc=new sendget();
try
//PolicyEngine.assertPermission(PermissionID.SYSTEM);
Socket h = new Socket("192.9.200.155",9000);
Socket s = new Socket("192.9.200.155",9001);
Socket t = new Socket("192.9.200.155",9002);
int j;
CmdFunc.SendCmd(h,0,0x01,null);
CmdFunc.GetCmd(h,HwListReply);
CmdFunc.SendCmd(s,9,0x1e,StartLink); //New Link Proc Start
CmdFunc.GetCmd(s,NotUsedReply);
CmdFunc.SendCmd(s,37,0x00,TrapConfig); //TRAP Configuration
CmdFunc.GetCmd(s,NotUsedReply);
CmdFunc.SendCmd(s,155,0x03,SetUserOutput);//Sets User Output Format
CmdFunc.GetCmd(s,NotUsedReply);
catch(Exception e){}
else
textField1.setText( "000.000 is the null choice. Try another." );
public void receiveText1( String select )
Gselect=select;
public void makeMHZ()
String y = freqC.getSelectedItem();
y = y.substring(0,3);
mhz = Integer.parseInt(y);
//textField1.setText( y );
public void makeKHZ()
String y = freqC.getSelectedItem();
y = y.substring(4,7);
khz = Integer.parseInt(y);
//textField1.setText( y );
import java.awt.*;
import java.applet.*;
import java.io.RandomAccessFile;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.LineNumberReader;
import java.awt.event.*;
import com.ms.security.*;
import netscape.security.*;
import netscape.util.*;
public class saver extends Applet implements ActionListener
String nameS = "Data.txt";
String dataS = "Default Data";
Button saveB;
public void init()
saveB = new Button("SaveFile");
add(saveB);
saveB.addActionListener(this);
public void actionPerformed(ActionEvent event)
if(event.getSource() == saveB)
RandomAccessFile RAF;
byte array0[] = dataS.getBytes();
try
if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
if(Class.forName("netscape.security.PrivilegeManager") != null)
netscape.security.PrivilegeManager.enablePrivilege("UniversalFileWrite");
catch (Throwable cnfe)
try
RAF = new RandomAccessFile(nameS, "rw");
// RAF.writeUTF(dataS);
RAF.write(dataS.getBytes());
RAF.close();
catch(Exception e)
public void receiveND(String name, String data)
if(name != null)
nameS = name;
dataS=data;
import java.io.RandomAccessFile;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.LineNumberReader;
//import java.security.*;
import com.ms.security.*;
import netscape.security.*;
import netscape.util.*;
public class reader
//Signature sig;
public String getData(String filename, int pass)
//String nameS = "Data.txt";
String dataS = "Default Data Sucks";
String comma = ",";
int get = pass, count=0, top=0, bottom=0;
char[] work;
try
if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
if(Class.forName("netscape.security.PrivilegeManager") != null)
netscape.security.PrivilegeManager.enablePrivilege("UniversalFileRead");
catch (Throwable cnfe)
try
//sig.sign();
//nameS = filename;
RandomAccessFile RAF = new RandomAccessFile(filename, "r");
// dataS = RAF.readUTF();
dataS = RAF.readLine();
RAF.close();
catch(Exception e)
return e.toString();
work = dataS.toCharArray();
for(int i = 0; i < dataS.length(); i++)
if( work[i] == ',' )
count++;
if(get == count)
bottom = i + 1;
if( (work[i] == ',') && (count > get) && (top == 0) )
top = i;
dataS = dataS.substring(bottom,top);
return dataS;
}

import java.awt.*;
import java.applet.*;
import java.net.*;
import java.io.File;
import java.awt.event.*;
//import java.security.*;
//import sun.security.*;
//import java.awt.Window;
//import com.ms.security.*;
public class Edit extends Applet implements ActionListener, ItemListener
String Gselect;
reader readit;
int mhz, khz;
TextField textField1;
String freq = "000.000";
String data;
Choice freqC;
Button ActivateB, SaveB, /*CancelB, HelpB,*/ DeleteB;
Checkbox SetC;
int NotUsedReply[] = new int[200];
int HwListReply[] = new int[200];
public void init()
readit = new reader();
String myFile="satellite.st1";
// myFile = myFile.concat(Gselect);
File satellite = new File(myFile);
textField1 = new TextField();
textField1.setText( "(void) " );
add( textField1 );
SetC = new Checkbox("TRAP-RX");
add(SetC);
SetC.addItemListener(this);
freqC = new Choice();
freqC.setSize(20,50);
freqC.add("000.000");
add(freqC);
freqC.addItemListener(this);
ActivateB = new Button("Activate");
add(ActivateB);
ActivateB.addActionListener(this);
SaveB = new Button("Save");
add(SaveB);
SaveB.addActionListener(this);
DeleteB = new Button("Delete");
add(DeleteB);
DeleteB.addActionListener(this);
/*CancelB = new Button("Cancel");
add(CancelB);
CancelB.addActionListener(this);
HelpB = new Button("Help");
add(HelpB);
HelpB.addActionListener(this);*/
//textField1.setText( data );
for(int a = 1; a < 9; a++)
data = readit.getData(satellite.getAbsolutePath(), a);//("E:\\forte4j\\system\\Projects\\Zebra\\satellite.st1", a);
freqC.addItem(data);
textField1.setText(satellite.getAbsolutePath() );
public void paint(Graphics g)
//g.drawString("Radio Setup Files",20, 20);
//g.drawString(getParameter("wse"),20, 20);
public void actionPerformed(ActionEvent event)
if(event.getSource() == ActivateB)
activator();
if(event.getSource() == SaveB)
/*if(event.getSource() == CancelB)
stop();
if(event.getSource() == HelpB)
if(event.getSource() == DeleteB)
public void itemStateChanged(ItemEvent e)
if(e.getItemSelectable() == SetC)
textField1.setText("Check box 1 clicked!");
if(e.getItemSelectable() == freqC)
freq = ((Choice)e.getItemSelectable()).getSelectedItem();
public void activator()
makeMHZ();
makeKHZ();
if(mhz > 254)
int StartLink[]={0x0c,0x01,0x07,0x00,0x00,0x00,0x00,0x00,0x00}; //New Link Proc Start
int TrapConfig[]={0x25,0x80,0x00,0x00,0x00,0xb7,0x00,0x0c,0x0b, //TRAP Configuration
0x00,0x00,0x00,0xff,0xa0,0xff,0x0d,0xff,0xe8,
0xff,0x0d,0xff,0x00,0xff,0x15,0xff,0xb0,0xff,
0xff,0xff,0x94,0x0a,0x01,0x06,0x1a,0x00,0x0d,
0x2d,0x21};
TrapConfig[11]=(mhz-255);
TrapConfig[12]=(khz/5);
int SetUserOutput[]={0x41,0x42,0x49,0x54,0x52,0x41,0x50,0x20,0x34, //Sets User Output Format
0x35,0x34,0x35,0x30,0x30,0x2e,0x30,0x4e,0x30,
0x38,0x32,0x34,0x35,0x30,0x30,0x2e,0x30,0x57,
0x30,0x31,0x30,0x30,0x2e,0x30,0x30,0x4b,0x4d,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00};
sendget CmdFunc;
CmdFunc=new sendget();
try
//PolicyEngine.assertPermission(PermissionID.SYSTEM);
Socket h = new Socket("192.9.200.155",9000);
Socket s = new Socket("192.9.200.155",9001);
Socket t = new Socket("192.9.200.155",9002);
int j;
CmdFunc.SendCmd(h,0,0x01,null);
CmdFunc.GetCmd(h,HwListReply);
CmdFunc.SendCmd(s,9,0x1e,StartLink); //New Link Proc Start
CmdFunc.GetCmd(s,NotUsedReply);
CmdFunc.SendCmd(s,37,0x00,TrapConfig); //TRAP Configuration
CmdFunc.GetCmd(s,NotUsedReply);
CmdFunc.SendCmd(s,155,0x03,SetUserOutput);//Sets User Output Format
CmdFunc.GetCmd(s,NotUsedReply);
catch(Exception e){}
else
textField1.setText( "000.000 is the null choice. Try another." );
public void receiveText1( String select )
Gselect=select;
public void makeMHZ()
String y = freqC.getSelectedItem();
y = y.substring(0,3);
mhz = Integer.parseInt(y);
//textField1.setText( y );
public void makeKHZ()
String y = freqC.getSelectedItem();
y = y.substring(4,7);
khz = Integer.parseInt(y);
//textField1.setText( y );
import java.awt.*;
import java.applet.*;
import java.io.RandomAccessFile;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.LineNumberReader;
import java.awt.event.*;
import com.ms.security.*;
import netscape.security.*;
import netscape.util.*;
public class saver extends Applet implements ActionListener
String nameS = "Data.txt";
String dataS = "Default Data";
Button saveB;
public void init()
saveB = new Button("SaveFile");
add(saveB);
saveB.addActionListener(this);
public void actionPerformed(ActionEvent event)
if(event.getSource() == saveB)
RandomAccessFile RAF;
byte array0[] = dataS.getBytes();
try
if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
if(Class.forName("netscape.security.PrivilegeManager") != null)
netscape.security.PrivilegeManager.enablePrivilege("UniversalFileWrite");
catch (Throwable cnfe)
try
RAF = new RandomAccessFile(nameS, "rw");
// RAF.writeUTF(dataS);
RAF.write(dataS.getBytes());
RAF.close();
catch(Exception e)
public void receiveND(String name, String data)
if(name != null)
nameS = name;
dataS=data;
import java.io.RandomAccessFile;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.LineNumberReader;
//import java.security.*;
import com.ms.security.*;
import netscape.security.*;
import netscape.util.*;
public class reader
//Signature sig;
public String getData(String filename, int pass)
//String nameS = "Data.txt";
String dataS = "Default Data Sucks";
String comma = ",";
int get = pass, count=0, top=0, bottom=0;
char[] work;
try
if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
if(Class.forName("netscape.security.PrivilegeManager") != null)
netscape.security.PrivilegeManager.enablePrivilege("UniversalFileRead");
catch (Throwable cnfe)
try
//sig.sign();
//nameS = filename;
RandomAccessFile RAF = new RandomAccessFile(filename, "r");
// dataS = RAF.readUTF();
dataS = RAF.readLine();
RAF.close();
catch(Exception e)
return e.toString();
work = dataS.toCharArray();
for(int i = 0; i < dataS.length(); i++)
if( work == ',' )
count++;
if(get == count)
bottom = i + 1;
if( (work == ',') && (count > get) && (top == 0) )
top = i;
dataS = dataS.substring(bottom,top);
return dataS;

This message [Ubuntu repositories or Mozilla download: " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory....

Ubuntu 11.04: I have been getting this message whenever I install Firefox from the repositories and downloading the tar file. I cannot use Firefox! " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."Firefox does not respond to any addresses or a google search. Indeed it responds to nothing. There is no Profile folder!

Uninstalling Firefox on Linux
* http://kb.mozillazine.org/Uninstalling_Firefox#On_Linux
* http://kb.mozillazine.org/Installation_directory#Linux
* Removing user profile data - http://kb.mozillazine.org/Uninstalling_Firefox#Removing_user_profile_data
After all is done, Restart your system.
Installing Firefox on Linux
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Linux
Check and tell if its working.

Problem with file system logging in Solaris7

Similar Messages

Maybe you are looking for