Problem with files not being savable.
I've tried asking for help but none of the many people who've read my request for help answered! It's easy to see I'm pretty clueless about how the computer works but i think I can solve the problem if I'm pointed in the right direction.
Every Word file I open now has the following new and unwelcome identity in Get Info -- More Info : Title: Photos for Personal Use or Home Display:
Authors: Technology
I don;t know who 'Photos for Personal Use...' or 'Technology' are, but I don't want them in my system. It must be this intrusion that's giving me trouble saving and exiting from Word Files.
The files are all written Word documents.
Suggestions would be appreciated!
They are all After Submit processes, they only run when the page is submitted, not when first built, so should they not all be shown in debug when the page is submitted, whether they're conditonal or not?
The strange thing is, if I change their sequence values to 21 or above, they run fine. Although this does solve our problem it doesn't explain why they're not running as expected, and it's a potential issue that could catch us out elsewhere.
Edit - we're narrowing it down I think. One of the processes appears to be the cause of this. If we increase it's sequence number, it seems that anything with a lower sequence than it never seems to run. I'll have a look at what this process is doing although I still don't understand why the ones before it don't show up.
Edited by: Antilles on Mar 11, 2009 9:12 AM
Similar Messages
-
Problem with process not being executed depending on sequence
Got a weird problem which is causing us much frustration. We have a page with 6 processes on. It appears that several of the processes are not being run by Apex, we've verified this by looking at the debug readout.
We created a new, unconditional test process to always run and placed it before all the other processes in the page. However it's not being run either. It doesn't even show up in the debug. But if we then change it's sequence so it's the last process in the page, it runs fine and shows up in the debug readout.
Could we have set something on the page that's causing Apex to skip the first 2 processes. Even if they're conditional I'd expect the debug readout to show that Apex hasn't run them (e.g. 0.03: ...Do not run process "PROCESS1").
The processes on the page have sequences of 10, 20, 30, 35, 40, and 999. If we create the Test process and assign it any sequence below 20, it fails to run. A sequence of 21 or above makes it run.
Any ideas? We are stumped!They are all After Submit processes, they only run when the page is submitted, not when first built, so should they not all be shown in debug when the page is submitted, whether they're conditonal or not?
The strange thing is, if I change their sequence values to 21 or above, they run fine. Although this does solve our problem it doesn't explain why they're not running as expected, and it's a potential issue that could catch us out elsewhere.
Edit - we're narrowing it down I think. One of the processes appears to be the cause of this. If we increase it's sequence number, it seems that anything with a lower sequence than it never seems to run. I'll have a look at what this process is doing although I still don't understand why the ones before it don't show up.
Edited by: Antilles on Mar 11, 2009 9:12 AM -
I am trying to login to Facebook. I keep getting error message
Cookies Required
Cookies are not enabled on your browser. Please adjust this in your security preferences before continuing.
I followed the Firefox direction for privacy settings but they are not being saved. What am I doing wrong?If you are blocking cookies, make an exception; If you are not blocking cookies, make sure you don't block site with an exception. Compare your settings to
* http://imageshack.us/photo/my-images/232/clearcachew.png/
Some references:
* Cookies - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Cookies
* Cookies | How to | Firefox Help<br>https://support.mozilla.com/kb/Cookies
* Enabling and disabling cookies | How to | Firefox Help <br>https://support.mozilla.com/kb/Enabling%20and%20disabling%20cookies
* Problematic extensions - MozillaZine Knowledge Base (see '''NoScript''' extension) <br>http://kb.mozillazine.org/Problematic_extensions -
Does anyone else have a problem accessing key web sites using Safari? I am frustrated with Safari particularly as I can get Access immediately using Firefox
I regularly use cleanmymac
Which is a scam, but we can come back to that later.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test. If there's no change, see below.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Problem with scrolling not being smooth
I recently had an updated version of Firefox installed on my computer (PC).But there is one feature of this new version that is actually worse than the old one.
When I scroll down to read multiple messages on message boards it doesn’t react the same as it did before the “upgrade”. It is not as “smooth” now as it was before when I scroll down through messages. This might seem like a small problem but it is a waste of time and hard on the eyes.
Each time I roll the wheel on my mouse one notch to move the messages up on my screen they move differently than they did before.
Now what happens is the increments that the screen moves in are much more discernible than before. Before the update, it was much more seamless and you couldn’t even notice any changes at all – it was more smooth – now it is very “jumpy”, to the point where you can’t read the messages as they scroll across the screen, which is the point. They move now in such noticeable or discernible increments that I can’t read them as they move – I have to wait until the screen stops.
I used to be able to read as I scrolled. This might not seem like a big problem but it is huge! It is way better to be able to read as you scroll – saves time and is way easier on your eyes.
Scrolling through newspaper articles or other internet articles doesn’t seem to be a problem because each mouse wheel click moves the screen in bigger “chunks”. It is the little movements that happen with message board reading that make it impossible to read and very hard on the eyes.
How do I fix this? Or can you fix this? Do I have to go back to the previous version of Firefox?
Please help. I hate this problem!
''title edited by a moderator''Firefox 13.0.1 'autoscroll'
You described the problem very well, and my problem is the same or maybe worse.
When I roll the wheel one notch the vertical scrolling takes off with a mind of its own.
The scrolling speed accelerates and decelerates in speed from start to stop.
per the '- - tools-options-help' redirection to 'ff help-browsing':
Browsing
Use autoscrolling: Autoscrolling is a useful feature which allows you to scroll the page by clicking the middle mouse button (usually the scroll wheel) and moving the mouse up or down. Some people find this annoying, so autoscrolling can be disabled with this option.
So I'm assuming this is the 'autoscroll' feature and is the way it was designed.
One click will start a short vertical scroll job of maybe 2 or so inches.
I don't like it because it is too erratic with too many clicks.
During the scrolling there is a horizontal slice of the page with noticeable distortion.
And if there is too much page-loading activity, the scroll is more erratic and is very obnoxious.
If it scrolls too fast I may click on the page and accidentally hit a link into a 'flash ad'.
Unchecking the 'autoscrolling' doesn't disable this undesired feature.
How do I get back to the 'one-line' per click scroll? What am I missing? -
CVS problem: Entries file not being created
I am using Flash Builder 4 Standard. Connecting to CVS, it had been working correctly but now when sharing a project it isn't working. It creates the project in the repository but doesnt include any of the files. Looking in the actual project files (in finder) it has created a CVS folder correctly but only has 'repository' and 'Root' but not 'Entries' which I assume is the problem. These are the steps I am taking (which was working...)
Create new project
File > New > Project
Complete all fileds including path to the project files. Fla, and .as files.
Do all the work I need to, and is finished. So I want to share the project to the team.
Right click on the project in 'Package Explorer' window > Team > Share project...
Select the CVS repository, (the connection works as I see all the projects listed)
Select 'use project name as module name'
Next > enter password > Finish
At this point I used to get another dialogue window appear to be able to add comments and finalize the commit. But now for some reason nothing happens. No errors or anything. When I look in the repository the folder is there but it is empty.
Does any one have any idea how I can fix this? It is most strange and very frustrating! Any help would be greatly appreciatedDelivery transaction accounting can be seen in Inventory--Transactions--Material Distributions screen (assuming that your destination is inventory)
Thanks
Nagamohan -
Mozilla Firefox has worked fine for several years. Beginning two days ago I would click on the desktop icon, I would see the little whirling circle for about 1 second and then nothing would happen. Later when I shut down the computer, suddenly I would see the mozilla firefox page come up for an instant and then shut down. The computer was telling me that it was open, but I couldn't see the home page or use it. Then I decided to try uninstalling it and reinstalling. The uninstall went fine. But after downloading the latest version, which my antivirus program told me was safe, the computer refused to install the executable program, telling me it was corrupt. I have already lost all my bookmarks, etc. It looks like my only solution is to use another browser. However I really prefer Mozilla. Any suggestions?
Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
-
Problem with file descriptors not released by JMF
Hi,
I have a problem with file descriptors not released by JMF. My application opens a video file, creates a DataSource and a DataProcessor and the video frames generated are transmitted using the RTP protocol. Once video transmission ends up, if we stop and close the DataProcessor associated to the DataSource, the file descriptor identifying the video file is not released (checkable through /proc/pid/fd). If we repeat this processing once and again, the process reaches the maximum number of file descriptors allowed by the operating system.
The same problem has been reproduced with JMF-2.1.1e-Linux in several environments:
- Red Hat 7.3, Fedora Core 4
- jdk1.5.0_04, j2re1.4.2, j2sdk1.4.2, Blackdown Java
This is part of the source code:
// video.avi with tracks audio(PCMU) and video(H263)
String url="video.avi";
if ((ml = new MediaLocator(url)) == null) {
Logger.log(ambito,refTrazas+"Cannot build media locator from: " + url);
try {
// Create a DataSource given the media locator.
Logger.log(ambito,refTrazas+"Creating JMF data source");
try
ds = Manager.createDataSource(ml);
catch (Exception e) {
Logger.log(ambito,refTrazas+"Cannot create DataSource from: " + ml);
return 1;
p = Manager.createProcessor(ds);
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Failed to create a processor from the given url: " + e);
return 1;
} // end try-catch
p.addControllerListener(this);
Logger.log(ambito,refTrazas+"Configure Processor.");
// Put the Processor into configured state.
p.configure();
if (!waitForState(p.Configured))
Logger.log(ambito,refTrazas+"Failed to configure the processor.");
p.close();
p=null;
return 1;
Logger.log(ambito,refTrazas+"Configured Processor OK.");
// So I can use it as a player.
p.setContentDescriptor(new FileTypeDescriptor(FileTypeDescriptor.RAW_RTP));
// videoTrack: track control for the video track
DrawFrame draw= new DrawFrame(this);
// Instantiate and set the frame access codec to the data flow path.
try {
Codec codec[] = {
draw,
new com.sun.media.codec.video.colorspace.JavaRGBToYUV(),
new com.ibm.media.codec.video.h263.NativeEncoder()};
videoTrack.setCodecChain(codec);
} catch (UnsupportedPlugInException e) {
Logger.log(ambito,refTrazas+"The processor does not support effects.");
} // end try-catch CodecChain creation
p.realize();
if (!waitForState(p.Realized))
Logger.log(ambito,refTrazas+"Failed to realize the processor.");
return 1;
Logger.log(ambito,refTrazas+"realized processor OK.");
/* After realize processor: THESE LINES OF SOURCE CODE DOES NOT RELEASE ITS FILE DESCRIPTOR !!!!!
p.stop();
p.deallocate();
p.close();
return 0;
// It continues up to the end of the transmission, properly drawing each video frame and transmit them
Logger.log(ambito,refTrazas+" Create Transmit.");
try {
int result = createTransmitter();
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Create Transmitter.");
return 1;
} // end try-catch transmitter
Logger.log(ambito,refTrazas+"Start Procesor.");
// Start the processor.
p.start();
return 0;
} // end of main code
* stop when event "EndOfMediaEvent"
public int stop () {
try {
/* THIS PIECE OF CODE AND VARIATIONS HAVE BEEN TESTED
AND THE FILE DESCRIPTOR IS NEVER RELEASED */
p.stop();
p.deallocate();
p.close();
p= null;
for (int i = 0; i < rtpMgrs.length; i++)
if (rtpMgrs==null) continue;
Logger.log(ambito, refTrazas + "removeTargets;");
rtpMgrs[i].removeTargets( "Session ended.");
rtpMgrs[i].dispose();
rtpMgrs[i]=null;
} catch (Exception e) {
Logger.log(ambito,refTrazas+"Error Stoping:"+e);
return 1;
return 0;
} // end of stop()
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
Logger.log(ambito,refTrazas+"\nControllerEvent."+evt.toString());
if (evt instanceof ConfigureCompleteEvent ||
evt instanceof RealizeCompleteEvent ||
evt instanceof PrefetchCompleteEvent) {
synchronized (waitSync) {
stateTransitionOK = true;
waitSync.notifyAll();
} else if (evt instanceof ResourceUnavailableEvent) {
synchronized (waitSync) {
stateTransitionOK = false;
waitSync.notifyAll();
} else if (evt instanceof EndOfMediaEvent) {
Logger.log(ambito,refTrazas+"\nEvento EndOfMediaEvent.");
this.stop();
else if (evt instanceof ControllerClosedEvent)
Logger.log(ambito,refTrazas+"\nEvent ControllerClosedEvent");
close = true;
waitSync.notifyAll();
else if (evt instanceof StopByRequestEvent)
Logger.log(ambito,refTrazas+"\nEvent StopByRequestEvent");
stop =true;
waitSync.notifyAll();
Many thanks.Its a bug on H263, if you test it without h263 track or with other video codec, the release will be ok.
You can try to use a not-Sun h263 codec like the one from fobs or jffmpeg projects. -
New Windows 7 computer. After installing Firefox, every time I bring it up I get the following message:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."
Then Firefox comes up, but will not function at all - can enter url address, but will not respond to ANY clicks, so can not go to any site.This link shows how to fix this - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
-
I keep getting the following dialogue box when I start Firefox " Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions." I am not sure how to find or change the profile directory. I have gone to the Options: General: Save files to ...box but it wont allow me to browse to another file and the box remains blank. ideas please!
See [[Could not initialize the browser security component]]
Continue here: [/questions/780717] -
Ubuntu 11.04: I have been getting this message whenever I install Firefox from the repositories and downloading the tar file. I cannot use Firefox! " There is no Profile folder Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features."Firefox does not respond to any addresses or a google search. Indeed it responds to nothing. There is no Profile folder!
Uninstalling Firefox on Linux
* http://kb.mozillazine.org/Uninstalling_Firefox#On_Linux
* http://kb.mozillazine.org/Installation_directory#Linux
* Removing user profile data - http://kb.mozillazine.org/Uninstalling_Firefox#Removing_user_profile_data
After all is done, Restart your system.
Installing Firefox on Linux
* https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Linux
Check and tell if its working. -
The full alert is " Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behaviour when accessing security features."
This is just started three/four days ago. I need assistance quickly as I can't access any secure sites e.g bank accounts/homepage etc.See [[Could not initialize the browser security component]]
-
When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
== This happened ==
Every time Firefox opened
== Two days ago, for no apparent reason.In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library -
PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!
What is your operating system? Reader version? Are these local or online PDFs? If online, in what browser?
Can you post a screenshot: https://forums.adobe.com/thread/1070933
Maybe you are looking for
-
Function Module Extractor with Delta
I'm very new to working with the BW, so I hope I'm explaining my question in a way that makes sense. I need to make a BW extractor that pulls data from at least one table, possibly more, and which also calculates some data. I think the only way I can
-
Something doesn't seem right with start-up
Maybe I'm going mad but something doesn't seem right. When I start-up I get the usual chime, the power light comes on, I hear the drive whir a bit, the fans have a quick blow and the I get a black screen for about 30 seconds. After this the light goe
-
What is the Best Way to Display a ClobDomain Field on a jspx Page?
I have a ClobDomain field in my table that I need to display in my jspx form. What is the best way to go about this? I can't just drag and drop the field from my View and place it onto the form. Thanks.
-
Unable to see print preview for Sales PDF form SLS_FORM01 SD_SLS_PRINT01
Hi, I tried to use pdf forms for my sales print forms . I maintained standad driver program SD_SLS_PRINT01 and pdf form SLS_FORM01 in NACE. But i am unable to see print preview . But i am able to view standard purchase order pdf form MEDRUCK_PO .
-
Hi Experts, I m working on SAP MEINT. I have changed Customer Service Transaction for equipmentStatusChangeRequest_UNSCH_DOWN. If i generate queue, its is giving following error in queue monitor on retry : [STEP = STD_SERVICE]. Error calling plugin '