Problem with finding driver for Xerox Phaser 3117 laser printer.

Hello!
I have trouble with finding appropriate driver for my Xerox Pahser 3111 printer. There is no support for iOS on their official support website.
Thank you for your help.

Hello there, AnnaVod.
The following Knowledge Base article provides some helpful pointers for troubleshooting AirPrint on your iOS device:
About AirPrint
http://support.apple.com/kb/ht4356
For best results
Make sure your software is up to date. For iOS, verify that your device is using the latest version of iOS available and that the app you're printing from is up to date. For OS X, Use Software Update to update OS X and apps you've purchased from the Mac App Store.
To use your AirPrint printer with Wi-Fi, the printer must be connected to the same Wi-Fi network as your iOS device or Mac, either through bridging, or a direct connection to your Wi-Fi network.
AirPrint printers connected to the USB port of an Apple AirPort Base Station or AirPort Time Capsule are not supported with AirPrint. Connect your AirPrint printer to your network using Wi-Fi, or connect it to a LAN port on your AirPort device using Ethernet.
Make sure that your AirPrint printer is connected to your network before attempting to print. Some AirPrint printers can take several minutes to join a network after being turned on.
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
Important: Printers not listed in this article are not supported by AirPrint. To search for an AirPrint printer model, use the Find feature of your web browser (usually Command-F) to search the list below.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • Need Driver for Minolta PageWorks 20 Laser Printer, Mac OS 10.4.11, G5

    Does anyone have any idea where I can find a driver for the Minolta PageWorks 20 printer? I can't find it on the Minolta site nor in a Google search. Generically it'll work with a LaserWriter driver, but I am unable to utilize the different configurations available on the printer itself (which tray to print from and so forth). Or if it's not available, does anyone know how I can customize the standard LaserWriter driver to run this specific printer? Many thanks!

    Hi,
    I'd try a PPD from another QMS printer, like this one...
    http://www.qms.com/support/currentprinters/mc2200sup.htm
    You can also try hand editing a copy of the Generic one to add/change some features, here's a sample of what the start looks like...
    *PPD-Adobe: "4.0"
    *FormatVersion: "4.0"
    *LanguageEncoding: MacStandard
    *LanguageVersion: English
    *Manufacturer: "PostScript Printer Manufacturer"
    *Product: "(Generic PostScript Printer)"
    *PSVersion: "(2000.0) 1"
    *ModelName: "Generic PostScript Printer"
    *ShortNickName: "Generic PostScript Printer"
    *NickName: "Generic PostScript Printer"
    *LanguageLevel: "2"
    *OpenUI *PageSize: PickOne
    *OrderDependency: 30 AnySetup *PageSize
    *DefaultPageSize: Letter
    *PageSize Letter/US Letter: "level2 {
    2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice
    statusdict /lettertray known {statusdict /lettertray get exec /letterR where {pop letterR} if}{letter} ifelse
    } ifelse"
    *End
    *PageSize Legal/US Legal: "level2 {
    2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice
    statusdict /legaltray known {statusdict /legaltray get exec}{legal} ifelse
    } ifelse"
    *End
    *PageSize A4: "level2 {
    2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice
    statusdict /a4tray known {statusdict /a4tray get exec}{a4} ifelse
    } ifelse"
    *End
    *PageSize ISOB5: "level2 {
    2 dict dup /PageSize [499 708] put dup /ImagingBBox null put setpagedevice
    statusdict /b5tray known {statusdict /b5tray get exec}{b5} ifelse
    } ifelse"
    *End
    *PageSize LetterSmall/US Letter Small: "level2 {
    2 dict dup /PageSize [612 792] put dup /ImagingBBox [30 31 582 761] put setpagedevice
    statusdict begin /lettertray where {pop lettertray} if lettersmall end

  • Cannot find driver to Xerox Phaser 3210

    Hello,
    I have "strange" Xerox Phaser 3210 since 2002. This is usual PCL6 compatible
    Xerox laser printer which is recognized by iMac. Unfortunately, no driver for this printer is selected If I try to install some driver for Postscripts printer - Postscript source text is printed (as I can suggest - this printer does not support Postscript at all). If I try to install some Gutenprint driver - printer doesn't respond at all.
    What is worse - there are no mention about Phaser 3210 on the Xerox' site. I suspect this is modification for the Russian market only. But there no drivers for Mac on www.xerox.ru as well.
    The question is: what should I do to find appropriate driver for my printer?

    Xerox bought (at least) the phaser series from Tektronix a few years ago.
    If I recall correctly, the xerox support site is split - you have to choose between xerox or tektronix.
    On the US site, I can't find any mac drivers for that printer.
    Just Windows drivers
    http://www.support.xerox.com/go/results.asp?Xlang=en_ZA&XCntry=ZAF&prodID=3210&r ipId=&Xtype=download
    There is also this notice:
    This product is not available in all regions. Support is not available through the Xerox.com website or other corporate support organizations. See Contact Us for local contacts in your region that may support this product.
    this may also help:
    http://www.openprinting.org/showprinter.cgi?recnum=Xerox-Phaser3210

  • Problem with JDBC driver for Oracle 10g

    Hi.
    I've successfully accessed a MySQL database via a DataSource from a servlet (that uses a DAO). However, when I try to do the same with an Oracle 10g Database, I get the error message:
    Cannot load JDBC driver class 'oracle.jdbc.driver.OracleDriver'
    I'm using J2SE1.5.0/5.0 and ojdbc14.jar, the latter of which I downloaded this afternoon as the latest driver JAR available on the Oracle site. As with the MySQL driver, I've placed it in the commons\lib folder within Tomcat. (I've also, of course, made the necessary modifications to server.xml and web.xml.)
    Upon examining the ReadMe file at the top of the Oracle download page, I found that the oracle.jdbc.driver package is now deprecated and all references to oracle.jdbc.driver should be replaced with oracle.jdbc. However, I got a similar error message when I tried this modification. Upon examining the contents of ojdbc.jar, I found that the driver was there and that it was, in fact, still oracle\jdbc\driver\OracleDriver!
    It appears as though the Oracle site has not been updated with a driver that matches its latest documentation. However, this does not explain why the driver is not even being loacted when it is in the correct place. Can anybody shed any light on this? Any help would be much appreciated.
    Thanks in anticipation.
    Cheers.
    Jan

    I've successfully accessed a MySQL database via a
    DataSource from a servlet (that uses a DAO). However,
    when I try to do the same with an Oracle 10g
    Database, I get the error message:
    Cannot load JDBC driver class 'oracle.jdbc.driver.OracleDriver'
    That's different from a ClassNotFoundException.
    >
    I'm using J2SE1.5.0/5.0 and ojdbc14.jar, the latter
    of which I downloaded this afternoon as the latest
    driver JAR available on the Oracle site. So you got ojdbc14.jar or ojdbc14_g.jar under the 10g drivers?
    As with the
    MySQL driver, I've placed it in the commons\lib
    folder within Tomcat. I think it's a better idea to put in the WEB-INF/lib directory of your Web app rather than commons/lib. WAR files are a very good idea, too.
    (I've also, of course, made the
    necessary modifications to server.xml and web.xml.)So you're using a JNDI data source? It sounds to me like that's where the problem is.
    You should not have to edit the server.xml at all. If you put the <ResourceParams> in a context XML file with the same name as your WAR file into the TOMCAT_HOME/webapps directory it'll be picked up automatically. (It might also be accessible in the META-INF directory for your app, but I haven't done it that way.)
    Upon examining the ReadMe file at the top of the
    Oracle download page, I found that the
    oracle.jdbc.driver package is now deprecated and all
    references to oracle.jdbc.driver should be replaced
    with oracle.jdbc.
    However, I got a similar error
    message when I tried this modification. Upon
    examining the contents of ojdbc.jar, I found that the
    driver was there and that it was, in fact, still
    oracle\jdbc\driver\OracleDriver! The fully-resolved class name you should be using MUST match the class that's in the ojdbc14.jar that you're using. Look in the JAR for the definitive answer: the one that I downloaded is still using the oracle.jdbc.driver package for OracleDriver.class. Ignore the docs - use the name that's in the JAR.
    It appears as though the Oracle site has not been
    updated with a driver that matches its latest
    documentation. That often happens with docs.
    However, this does not explain why the
    driver is not even being loacted when it is in the
    correct place. Can anybody shed any light on this?
    Any help would be much appreciated.I think the problem lies in your web.xml and server.xml
    I'd recommend that you decouple the JDBC from the Web app for now. See if you can connect to Oracle using a simple desktop app and leave the Web piece out of the equation for now. Once you can do that, you'll be certain that the parameters you're using are correct and you can turn your attention to getting the Tomcat configuration right.
    PS - I'm using Oracle 9.2.0.1 and Tomcat successfully right now, so it can be done.

  • Problems with a driver for PCCAM-300

    I need a driver for PCCAM-300 and I have Windows XP. I've already downloaded two diferent drivers:
    1. PCCAM300DrvsV_04.exe
    2. PCCAM300Drv.exe
    When I tried to install them I had problems because this softwares were not compatible for Windows XP (but when I downloaded them it was suposed to be compatible).
    What can I do?
    Could yo help me to solve this problem?
    Thank you

    Creative Labs PD060 PC-CAM 300 is NOT compatible with WindowsXP! The program might work just for storing photos but it does not recognized the camera! Most site which contained information on the camera says it's compatible with WindowsXP, but it's not! Sorry Creative, try again. http://www.amazon.com/Creative-Labs-...0/dp/B000063YQ

  • Can't find driver for my hp photosmart 7660 printer for windows 7

    Hello, I want a driver(hp photosmart 7660) for my laptop I wouldn't like to change my printer. I tried the steps another guy asked for the same printer but for windows 8 and it didn't worked. I couldn't find the 1st printer hp deskjet plc3 or something and the others didn't work.Please if anyone can help me I would appreciate it.

    Hi,
    Although a driver for Windows 7 is not avaialble, you may install an Alternative driver by using the Deskjet 5600 model.
    Follow these steps to install an alternative driver for your printer:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796821&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Problems with the driver for the HP E3631A

    I have installed the driver of NI for Labview version 5.1.
    I need to send information to a DC Power Supply ( HP E3631A), this information is just to set the output voltage for the HP E3631A.
    I'm using the "getting started.vi" for the HP E3631A, normaly this must work !
    I have called with support from NI,
    But they couldn't tell me what the problem was !
    The problem is that when I set the voltage on my PC ( using labview),
    and run the getting started.vi, I always get the same outputvoltage from my DC Power Supply. ( HP E3631A ) ( +0.288V )
    You first need to choose between +6V, +25V and -25V.
    The strange thing is that when you change this, the DC Power Supply
    changes correctly, follows these settings.
    So the DC Power Sup
    ply follow's the +6V, +25V and -25V when you change these, but always gives the same voltage when you set the outputvoltage.
    Can you tell me what the problem is ??
    Thanks in Advance !
    Hope you can solve my problem !!!

    Pauwels,
    You may also check in the Configure Output.vi, which is one subvi of the Getting Started VI, and try to set the boolean for output(which is On=True by default) to false. I do not have the power supply, but my guess is that this boolean when set to true, only allows the predefined values.
    Regards,
    Cyril Bouton
    Applications Enginneer
    National Instruments
    Cyril Bouton
    Active LabVIEW Developper

  • Problem with JDBC driver for mysql

    I have downloaded the Connector/J3.0 mysql-connector-java-3.0.7-stable.tar.gz from www.mysql.com/downloads/api-jdbc-stable.html web site and used gunzip and tar to extract the file. I have received the following error message:
    tar: directory checksum error
    Will this error cause some problem later on?
    Which directory should I put the driver into? Can I put it in any directory?
    Do I need to set the classpath for the driver? If yes, how can I set it?
    What is the connect string? Can you give a sample for me? I am using Solaris 5.8 and mysql is on the same machine.
    Thanks a lot,
    Lisa

    this is an example of a connect string for mysql that i used...
    public Connection CreateConnection () throws Exception
         Connection myConn = null;
         String driverName = "org.gjt.mm.mysql.Driver";
         String dbUrl = "jdbc:mysql://www.desres.com/jhazrd?user=jhazrd&password=????";
         Class.forName(driverName);
         myConn = DriverManager.getConnection (dbUrl);
    return myConn;
    }

  • Problem with wireless driver for Thinkpad X220

    Hi guys
    I tried to install a driver from the AUR from here https://aur.archlinux.org/packages.php?ID=46797
    But I get this error:
    -> Found kernel-3.0_support.patch
    ==> Validating source files with md5sums...
    rtl8192ce_linux_2.6.0006.0321.2011.tar.gz ... Passed
    kernel-3.0_support.patch ... Passed
    ==> Extracting Sources...
    -> Extracting rtl8192ce_linux_2.6.0006.0321.2011.tar.gz with bsdtar
    ==> Entering fakeroot environment...
    ==> Starting build()...
    patching file HAL/rtl8192/Makefile
    make: *** /lib/modules/3.0-ARCH/build: No such file or directory. Stop.
    make: *** [all] Error 2
    ==> ERROR: A failure occurred in build()
    I am using kernel 3.0
    I don't know what else to do, I googled a little but found nothing
    Last edited by Dannymx (2011-09-22 06:17:13)

    You need to install linux-headers. I wish you the best of luck -- I had a USB wireless adapter that used the same chipset and couldn't get the driver to compile for the life of me.
    Last edited by kahlil88 (2011-09-21 05:44:18)

  • Проблема с драйвером для видеокарты /The problem with the driver for your video card "atikmdag.sys"

    При загрузке системы ноутбук стал выдавать "синий экран". Запускается только в безопасном режиме. Переустановил систему все работает, но без драйверов на видеокарту. Как только устанавливаешь драйвера на видеокарту просит перезагрузиться, после перезагрузки вместо хода в сисетму снова  "синий экран"  

    fekero
    Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
    English: http://h30434.www3.hp.com
    Spanish: http://h30467.www3.hp.com
    French: http://h30478.www3.hp.com
    Portuguese: http://h30487.www3.hp.com
    German: http://h30492.www3.hp.com
    Korean: http://h30491.www3.hp.com/t5/community/communitypage
    Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
    Cheers,
    KarolB
    I work for HP

  • Problem with finding BADI for transaction F9K2

    I Found many BADIs for the transaction...but am not able to decide which is suitable for my requirement..
    my requirement is ..i need to keep check box removing radiobutton in the the transctio F9K2 in tab 'accounts statements'  in  Bk.st.orig column....
    in which BADI i can Achieve  my requirement....

    Hi aman,
       Clif parameter is not getting filled when debugging the screen.and i need the badi which changes the radio button field "bk.st.orig" to checkbox in the table control of the account statement tabstrip . can please help in this regard.
    thanks and regards

  • OS Lion driver for Brother QL-570 Label Printer

    Where to find driver for Brother QL-570 Label Printer ?
    Have been to Brother web site no listing for OS Lion.
    10.6
    10.3,,, etc..

    Also run Software Update, you will quickly find out if the printer is supported in Lion or not. The printer manufactureres supply Apple with drivers so if one isn't avaible via Software Update then Brother isn't supporting the device under Lion. Make sure the printer is connected to the computer and turned on when running Software Update.

  • My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

    My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
    When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    Don't install the Thunderbolt update -- it's defective.

  • Hello! i've a problem with my Imac. it shows me white screen with a folder with quastion. it could be a problem with hard drive. i should insert mac os cd, but i couldnt find it. in Russia, in Finland and in Sweden the same problem)

    hello! i've a problem with my Imac. it shows me white screen with a folder with quastion. it could be a problem with hard drive. i should insert mac os cd, but i couldnt find it. in Russia, in Finland and in Sweden the same problem)

    Have a look at some of the suggestions in this link:
    http://support.apple.com/kb/TS2570?viewlocale=en_US&locale=en_US (Russian is available from the link within the article (top right of the page).

  • Leopard install fails with panic: "Unable to find driver for this platform"

    I have an early 2006 20" iMac with OSX 10.4.11 installed. Running perfectly with latest Firmware, permissions repaired, just perfect. I now want to upgrade to OSX 10.5, so I insert the Leopard Install DVD, reboot, and then to my horror a kernel panic, screen goes black with message panic(CPU 0 ...): "Unable to find driver for this platform", with the usual boxed message about holding the start button.
    Grateful for any help.

    I finally managed to install Leopard by using a 2nd iMac to read the install DVD, and using firewire and Target Mode as described in http://reviews.cnet.com/8301-13727_7-10327225-263.html?tag=mfiredir . This seems to imply that the kernel panic is due to some hardware fault with my iMac's optical drive.

Maybe you are looking for