Problem with Firefighter logs after upgrade to 5.3 from 5.2

Hello Gurus ,
just for 2 weeks we are running GRC 5.3 , which we updated from the 5.2 version .
Unfortunately i could not make all the possible tests in one day and after i didnt check the FF reports .
So after 10 days..after solving some issues from the upgrade i realized that in SPM (Superuser Priviliege Management ) we have a problem as well .
We cant perform anymore reason / activity reports because the data are empty.By empty i mean all the entries users made dissapeard. I searched the two tables that normally should have the data (/virsa/zffcdhdr and the STXH ) but with no luck .
The other problem is..that after the upgrade to 5.3 from 5.2 the grcservice user that is responsible for the job /VIRSA/ZVFATBAK didnt had enough authorization to complete the job , thing that before worked fine .
So for 10 days the job didnt run and when i run the log report i see for every FFID the message "BACKGROUND JOB WAS NOT SCHEDULED/LOG & FILE NOT YET GENERATED"
When i look directly in the tables CDHDR and CDPOS i can see the data that the log needs.
But how can i reconstruct the FF log with this data ? Because when the auditor comes i would like to have the complete logs.
thank you all for the support
Cheerz ,
david

Hi David,
Please go through the SAP Note [1143639|https://service.sap.com/sap/support/notes/1143639] (and subsequent Notes). I hope it is of help, at least partially.
Best regatds,
Feri
Edited by: Ferenc Orosz on Apr 2, 2009 2:43 PM

Similar Messages

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

You have to go to autherized iPhone agent.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

Hi,
We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
Thanx
deepak

What kind of problems?
I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
This is your best bet.
If you still have problems, contact NI and ni.com/ask and start a support inquiry.

Problem with the workbook after upgrade

Hi all,
We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
1. What could be the possible reason behind this?
2. What exactly got changed in the system which reflected this problems?
3. What other problems might have occurred which we may not have noticed?
4. How can I find out the number of workbooks affected due to this?

Dear ,
This is known issue:
Please implement the below mentioned note as this will solve your issue,
Note 1609237 : Subsequent correction to 1567679
Regards,
Arvind

Problem with Java Script after upgrade from BW 3.5 to BI7

Dear Colleagues,
We're facing the issue with Java Script after upgrade of BW 3.5 to BI7.
Just after update we checked the basic functionality and it occured that some of web templates that use Java Script don't work. They generate seelction screen, but after selection the screen becomes blank without any error messages.
We're currently stucked since web templates weren't converted to BI7 version so they should work exactly as before the upgrade.
We compared the Java code with other environment that was not upgraded - it's perfectly the same.
The only explanation that comes to my mind is that some Java Script settings on the server level were changed during the upgrade but I have no idea where I can check that.
Thanks in advance for any suggestions,
Andrzej Bobula

Hi Deepu,
Thanks, it was great to read your reply and then few minutes later talk to you live on SDN Day!
Unfortunately, http cache clean-up did not help. But there is another funny thing I found - for exactly the same 3.5 webtemplate html code returned from WebAS 3.5 was different then from 7.0.
Unfortunately, this editor does not allow to paste complete code, even in CODE brackets, but here are main differences:
<b>3.5</b>
if (navigator.appName == "Microsoft Internet Explorer")
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=1&CMD=GET_TEMPLATE"
name="Content">
and
<b>7.0</b>
if (navigator.appName.indexOf("Microsoft Internet Explorer")!=-1)
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=8&REQUEST_NO=0&CMD=GET_TEMPLATE"
name="Content" 0nLoad="javascript:loadTitle()">
(I intentionaly put 0 i/o o in 0nLoad, otherwise Forum's editor does not accept the text.
How about SAP's claim that technical upgrade from 3.x to 7.0 changes nothing?
Regards,
Vitaliy

Problems with running programs after upgrade

I have tried to look for a solution elsewhere, but was not lucky to get it. My problem is that I have upgraded my Macbook pro from Tiger to Snow Leopard. Unfortunatelly when I try to start certain programs I get error message that Version of the software I want to run can not be run on installed Mac OS. For example error says that I want to run Safari version 3.0.4. However, I have upgraded all software and I know that Safari 4.0.3 was installed. I also get a similar error for Disk Utility, ICal and some others. I also can not start Quicktime. Icon just jump once and nothing happens further. Other programs work fine. Could someone please help me with that?

HI and Welcome to Apple Discussions...
Applications that ran on Tiger may not be compatible with Snow Leopard. You've gone from 10.4 to 10.6.
The most recent version of Safari is 4.0.5. Go to the Apple Menu/Software Updates. If you are running Safari 4.0.3, then the updater should download and install the 4.0.5 update for you.
You may need to install QuickTime7 from your SL disc.
Insert the Snow Leopard install disk. Open the Optional Installs folder, then open Optional Installs.mpkg. An Installer will start... click Continue. When you get to the Installation Type in the window on the right you will see: Applications. Click the Disclosure triangle so it faces down. Select QT 7 then click Continue.
Then repair disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Good read here regarding upgrading to Snow Leopard by; "a brody"...
http://discussions.apple.com/thread.jspa?messageID=10180165#10180165
You may want boot from the SL disc and run Disk Utility from there to verify the startup disk for errors.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
Carolyn
Message was edited by: Carolyn Samit

Problem with ADF Application after upgrade to 10.1.2.3

Hello,
i have some problems with my ADF applications after upgrade of AppServer to 10.1.2.3.
The only Excteption i got is in the application.log of the container:
Error in errorPage /faces/pages/error/error404.jspx
javax.servlet.ServletException
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:614)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:556)
     at pages.error._error404._jspService(_error404.java:682)
     at com.orionserver[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:356)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:674)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:230)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
     at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
     at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
     at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:674)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:230)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.EvermindHttpServletResponse.sendError(EvermindHttpServletResponse.java:1298)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.EvermindHttpServletResponse.sendError(EvermindHttpServletResponse.java:1428)
     at javax.servlet.http.HttpServletResponseWrapper.sendError(HttpServletResponseWrapper.java:162)
     at oracle.security.jazn.oc4j.JAZNServletResponse.sendError(Unknown Source)
     at oracle.adf.view.faces.webapp.ResourceServlet.doGet(ResourceServlet.java:169)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at oracle.adf.view.faces.webapp.ResourceServlet.service(ResourceServlet.java:135)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:674)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
Does anybody know how to handle it?
Regards.
Krystian.

I am also getting the similar error if I enable a particular coloumn of a table to load into ORM , I am getting the following error,
javax.servlet.jsp.JspException     at jsp.viewsinglerecord.throwError(_viewsinglerecord.java:31)     [SRC:/jsp/standardinclude.jsp:84]     at jsp.viewsinglerecord._jspService(_viewsinglerecord.java:1185)     [SRC:/jsp/displaymultiplerecords.jsp:461]     at com.orionserver[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:356)     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498)     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:230)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.GetParametersRequestDispatcher.forward(GetParametersRequestDispatcher.java:257)     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)     at java.lang.Thread.run(Thread.java:534)

Problem with SPAU Transports after Upgrade and after applying SAPKW70016

Dear All,
we copied old dev to new QA, upgraded new QA, then copied new QA to new DEV.
did the SPAU adjustments in DEV. At that time DEV SAP_BW version was SAPKW70015. After that we applied SAPKW70016. Now we're having problems with the SPAU transport because of the application of SAPKW70016.
Requested to kindly suggest ASAP.
Thanks & Regards
janardhan Kumar K

Hi,
Could you please to be more specific with the error ? Please check the log e send us the message error that is happening during the transport.
Thanks,
Walter Oliveira.

Problem with no nat after upgrade version

Hello Guys...
Im having problems with nat after upgrade....
source = 10.11.7.14
destination = 10.0.32.10
the next hop for 10.0.32/24 is 10.0.5.1, by inside interface. My firewall Pings this 10.0.5.1. When I change the router to doesnt pass by firewall, the connection works from source to destination, works!
In log, im receiving this message:
6
Nov 23 2012
15:24:54
302303
spbwts02_0303
55517
10.0.32.10
80
Built TCP state-bypass connection 249015 from dmz:spbwts02_0303/55517 (spbwts02_0303/55517) to inside:10.0.32.10/80 (10.0.32.10 /80)
6
Nov 23 2012
15:27:29
302304
spbwts02_0303
51123
10.0.32.10
80
Teardown TCP state-bypass connection 242785 from dmz:spbwts02_0303/51123 to inside:10.0.32.10/80 duration 1:00:10 bytes 0 Connection timeout
In 8.2 I had this NAT:
DMZ interface:
Exempt 10.0.32.0/24 10.11.7.0/24 (outbound)
I have a bypass for those networks and services. I guess I dont need bypass because the packet comes from dmz and goes to inside, right? Anyway, I removed bypass and nothing happen!
And now, in 8.4(5) I have:
DMZ Inside obj-10.11.7.0/24 obj-10.0.32.0/24 any original original
What can be my problem?

route, look:
Before:
route inside 10.0.32.0 255.255.255.0 10.11.5.1 1
Now and working:
route inside 10.0.32.0 255.255.255.0 10.11.2.3 1
I dont have an interface in the 10.11.5.0 network. I guess when someone configured the route, put this 10.11.5.1 as gateway, but I dont know how it was working.
Now, I changed to 10.11.2.3 and OK. My firewall has an interface in 10.11.2.0 newtork.
But the bypass is a mistery to me yet!

Problem with sound, maybe after upgrade.

Hello guys,
Yesterday I did a system upgrade and after I rebooted there seems to be a problem with my sound. There is now a popping sound during startup from both speakers, and again a crackling sound when it wakes from sleep. If I connect my headphones there is no sound output through it. The output is through speakers. My system is an Asus X201E. This is a part of pacman.log after which the problem started:
[2013-09-24 20:16] [PACMAN] Running 'pacman -Syu'
[2013-09-24 20:16] [PACMAN] synchronizing package lists
[2013-09-24 20:17] [PACMAN] starting full system upgrade
[2013-09-24 20:41] [PACMAN] upgraded elfutils (0.155-1 -> 0.156-1)
[2013-09-24 20:42] [PACMAN] upgraded fakeroot (1.19-1 -> 1.20-1)
[2013-09-24 20:42] [PACMAN] upgraded imagemagick (6.8.6.9-1 -> 6.8.6.10-1)
[2013-09-24 20:43] [PACMAN] upgraded inkscape (0.48.4-10 -> 0.48.4-11)
[2013-09-24 20:43] [PACMAN] upgraded jre7-openjdk-headless (7.u40_2.4.1-3 -> 7.u40_2.4.2-1)
[2013-09-24 20:43] [PACMAN] upgraded jre7-openjdk (7.u40_2.4.1-3 -> 7.u40_2.4.2-1)
[2013-09-24 20:43] [PACMAN] upgraded jdk7-openjdk (7.u40_2.4.1-3 -> 7.u40_2.4.2-1)
[2013-09-24 20:43] [PACMAN] upgraded lib32-elfutils (0.155-2 -> 0.156-1)
[2013-09-24 20:43] [PACMAN] upgraded lib32-systemd (204-1 -> 207-1)
[2013-09-24 20:43] [PACMAN] upgraded man-pages (3.53-1 -> 3.54-1)
[2013-09-24 20:43] [PACMAN] upgraded networkmanager (0.9.8.2-1 -> 0.9.8.4-1)
[2013-09-24 20:43] [PACMAN] upgraded pstoedit (3.62-2 -> 3.62-3)
[2013-09-24 20:43] [PACMAN] upgraded serf (1.3.0-1 -> 1.3.1-2)
[2013-09-24 20:43] [PACMAN] upgraded subversion (1.8.1-2 -> 1.8.3-1)
and output of lsmod:
Module Size Used by
nls_cp437 5953 1
vfat 10055 1
fat 51827 1 vfat
uvcvideo 72804 0
ath3k 7557 0
btusb 18496 0
videobuf2_vmalloc 3272 1 uvcvideo
videobuf2_memops 2335 1 videobuf2_vmalloc
videobuf2_core 27797 1 uvcvideo
bluetooth 308340 3 ath3k,btusb
videodev 110188 2 uvcvideo,videobuf2_core
media 11591 2 uvcvideo,videodev
snd_hda_codec_hdmi 30336 1
snd_hda_codec_realtek 37032 1
joydev 9663 0
arc4 2000 2
x86_pkg_temp_thermal 6959 0
intel_powerclamp 8802 0
coretemp 6326 0
kvm_intel 129393 0
kvm 379223 1 kvm_intel
crc32_pclmul 3019 0
crc32c_intel 14249 0
ghash_clmulni_intel 4501 0
ath9k 91043 0
cryptd 8473 1 ghash_clmulni_intel
ath9k_common 1991 1 ath9k
ath9k_hw 392347 2 ath9k_common,ath9k
microcode 13488 0
ath 15681 3 ath9k_common,ath9k,ath9k_hw
asus_nb_wmi 7368 0
asus_wmi 16306 1 asus_nb_wmi
sparse_keymap 3114 1 asus_wmi
alx 25191 0
mac80211 453808 1 ath9k
iTCO_wdt 5407 0
iTCO_vendor_support 1929 1 iTCO_wdt
snd_hda_intel 36520 2
snd_hda_codec 148129 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
cfg80211 402729 3 ath,ath9k,mac80211
snd_hwdep 6332 1 snd_hda_codec
snd_pcm 77765 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7234 2 snd_pcm,snd_hda_intel
snd_timer 18718 1 snd_pcm
rfkill 15698 4 cfg80211,bluetooth,asus_wmi
i915 610807 3
pcspkr 2027 0
snd 59141 11 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
evdev 10693 13
ac 3324 0
psmouse 85356 0
serio_raw 5041 0
soundcore 5450 1 snd
wmi 8347 1 asus_wmi
i2c_i801 11269 0
intel_agp 10872 1 i915
intel_gtt 12664 2 i915,intel_agp
drm_kms_helper 35854 1 i915
mdio 3525 1 alx
drm 235996 4 i915,drm_kms_helper
thermal 8620 0
button 4669 1 i915
video 11380 2 i915,asus_wmi
battery 6925 0
lpc_ich 13112 0
mperf 1267 0
mei_me 9296 0
mei 61875 1 mei_me
i2c_algo_bit 5391 1 i915
i2c_core 23720 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
shpchp 25457 0
processor 24917 0
ext4 470412 1
crc16 1359 2 ext4,bluetooth
mbcache 5866 1 ext4
jbd2 83376 1 ext4
hid_logitech_dj 10567 0
usbhid 41466 0
hid 88758 2 usbhid,hid_logitech_dj
sd_mod 30899 4
ahci 22888 3
libahci 21393 1 ahci
ehci_pci 4120 0
libata 171318 2 ahci,libahci
xhci_hcd 91419 0
ehci_hcd 48084 1 ehci_pci
scsi_mod 128695 2 libata,sd_mod
usbcore 178049 7 ath3k,btusb,uvcvideo,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common 1648 1 usbcore
and lspci -vv:
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_hcd
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7e1a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e18000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 107f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation 7 Series Chipset Family LPC Controller (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e16000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: ASUSTeK Computer Inc. Device 108d
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel modules: i2c_i801
02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
Subsystem: Lite-On Communications Inc Device 6628
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at f7d80000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
03:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 10)
Subsystem: ASUSTeK Computer Inc. Device 200f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at e000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
Kernel modules: alx
Any idea as to what happened? Also, I am using alsa. Thanks.
Edit: There is also a crackling sound when I connect or disconnect my headphone.
Last edited by dabholkaras (2013-09-25 11:30:29)

Hello dabholkaras,
Today I did a system upgrade and after I met a similer sound problem.
I resolved this problem by downgrade packages as follows;
upgrade /var/log/pacman.log:
[2013-09-28 18:14] [PACMAN] upgraded linux-firmware (20130725-1 -> 20130903-1)
[2013-09-28 18:14] [PACMAN] upgraded linux (3.10.10-1 -> 3.11.2-1)
[2013-09-28 18:14] [PACMAN] upgraded linux-headers (3.10.10-1 -> 3.11.2-1)
downgrade command:
~ $ sudo pacman -U /var/cache/pacman/pkg/linux-firmware-20130725-1-any.pkg.tar.xz
~ $ sudo pacman -U /var/cache/pacman/pkg/linux-headers-3.10.10-1-x86_64.pkg.tar.xz
~ $ sudo pacman -Ud /var/cache/pacman/pkg/linux-3.10.10-1-x86_64.pkg.tar.xz
[2013-09-28 23:45] [PACMAN] downgraded linux-firmware (20130903-1 -> 20130725-1)
[2013-09-28 23:46] [PACMAN] downgraded linux-headers (3.11.2-1 -> 3.10.10-1)
[2013-09-28 23:49] [PACMAN] downgraded linux (3.11.2-1 -> 3.10.10-1)

Problems with init 5 after upgrade.

Hi, I've got an three months old installation of ArchLinux in a VirtualBox machine and after upgrading with pacman, I can't get into init 5 anymore. I've followed all the instructions, updated the configuration files, etc. If I boot in init 3 and start x manually, it works well. The problem is strange, after entering init 5, when starting GDM, the screen flash between the graphical and the console mode, there's a warning (or error) message but I don't have time to read it and I'm not sure in which log file I could find it.
P.S.: I'm running xmonad over Gnome.

I've finally fixed it, but I'm not sure how! Here's what I've done:
* Edited rc.conf to remove dbus from the DAEMONS list
* rebooted, now GDM evidently wouldn't start, but at least I was able to log into the console
* Put back dbus in the DAEMONS list, at the exact same place
And now it works! That was really strange, now I just have to remember how to get GDM to work nicely with xmonad, I've done last week on another machine, so it shouldn't be that hard.

Problem with audio configuration after upgrading to iTunes 7.5

After being forced to upgrade to iTunes 7.5 (when downloaded a new song form the Music Store), an error message is displayed when I launch the application, "ITunes cannot run becuase it has detected a problem with your audio configuration". The application exits immediately.

Try the instructions in this article.
(26574)

A problem with Wi-fi after upgrade to Nokia Belle ...

Good Afternoon
I have a problem with my Nokia 500 (Belle) (Symbian).
I was using a old system and I had my wi-if acess working but after I upgrade my system to Belli my wi-fi doesn´t work. I tried writing the same password but my connection s (Connecting. connectins and fall).
May you help me ?
Is there any configuration if I have to do ?
Thanks a Lot

Hi
Thank you for you post and welcome to the forums.
Firstly try removing the WiFi access point off you device and then reboot the device and reset the router then try re-add the WiFi access point on your phone and see if it connects. If it still doesn't work temporarily removing the password on router then try to connecting to see if this helps.
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Problem with Firefighter logs after upgrade to 5.3 from 5.2

Similar Messages

Maybe you are looking for