Problem with first generation iPhone after 3.1 upgrade - HELP!

Hey all!
I'm wondering if any of you know how to help me out with this issue...
I have a first generation iPhone 16GB and I recently upgraded to 3.1 software, but my sim card is not supported - so I need to downgrade. I've tried restoring, tried QuickPwn but no success with anything. It's stuck on the emergency call screen. By the way, my sim card isn't supported on 3.0 either, so I need to downgrade it to the original. I've been browsing the web all day trying to find a solution and nothing yet. If you can help, I'd appreciated it GREATLY!
Thanks so much!

hi spoon7,
I am from dubai and got also the same problem as yours in my first generation iPhone when i updated my software to 3.1, absolutely the same the situation and experienced. My sim card now is not detected of my iphone and only emergency call on screen. So how can I put it back my old firmware version so that i can use again my iphone
Any body can help us. pleassssssssssss.
Thanks in advanced

Similar Messages

  • Problems with iWS6.0 SP4 after JDK change / upgrade

    Solaris8 SPARC
    iPlanet 6.0 WebServer SP4
    I recently upgraded from JDK 1.3.1_02 to JDK 1.3.1_07 .
    In both cases .... the JDK was installed at /usr/j2se.
    iPlanet 6.0 SP4 was already using JDK 1.3.1_02 before ( /usr/j2se ).
    Now after the JDK upgrade, in an attempt to restart the admserv. I am getting the exception below:
    iPlanet-WebServer-Enterprise/6.0SP4 B07/17/2002 14:04
    warning: daemon is running as super-user
    [LS ls1] http://soft2, port 8888 ready to accept requests
    java.lang.NoClassDefFoundError
    at java.security.Policy$1.run(Policy.java:144)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.security.Policy.getPolicyNoCheck(Policy.java:141)
    at java.security.SecureClassLoader.getPermissions(SecureClassLoader.java:133)
    at java.net.URLClassLoader.getPermissions(URLClassLoader.java:415)
    at sun.misc.Launcher$AppClassLoader.getPermissions(Launcher.java:289)
    at java.security.SecureClassLoader.getProtectionDomain(SecureClassLoader.java:157)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:106)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:243)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:51)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:281)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
    The errors logs say:
    [04/Apr/2003:18:36:58] info (20837): successful server startup
    [04/Apr/2003:18:36:58] info (20837): iPlanet-WebServer-Enterprise/6.0SP4 B07/17/2002 14:04
    [04/Apr/2003:18:36:59] info (20838): Installing a new configuration
    [04/Apr/2003:18:36:59] info (20838): [LS ls1] http://soft2, port 8888 ready to accept requests
    [04/Apr/2003:18:36:59] info (20838): A new configuration was successfully installed
    [04/Apr/2003:18:37:00] failure (20838): Internal error: unable to locate: com/iplanet/server/http/util/LogUtil
    [04/Apr/2003:18:37:00] failure (20838): Internal error: Unable to initialize utility classes
    [04/Apr/2003:18:37:00] failure (20838): Late initialization failed: Error running init function(late) NSServletLateInit: unknown error
    The class com/iplanet/server/http/util/LogUtil is in NSJavaUtil.jar ... which is included in the CLASSPATH in the start-jvm file, show below:
    NSES_JDK=/usr/j2se; export NSES_JDK
    NSES_JRE=${NSES_JDK}/jre; export NSES_JRE
    NSES_JRE_RUNTIME_LIBPATH=${NSES_JRE}/lib/sparc:${NSES_JRE}/lib/sparc/server:${NSES_JRE}/lib/sparc/classic:${NSES_JRE}/lib/sparc/native_thread
    s; export NSES_JRE_RUNTIME_LIBPATH
    NSES_JDK_RUNTIME_CLASSPATH=${NSES_JRE}/lib/ext/iiimp.jar:${NSES_JRE}/lib/i18n.jar:${NSES_JRE}/lib/rt.jar:${NSES_JDK}/lib/tools.jar:${NSES_JDK
    }/lib/dt.jar; export NSES_JDK_RUNTIME_CLASSPATH
    # DO NOT CHANGE ANYTHING BELOW THIS LINE
    NSES_SERVER_HOME=/usr/iplanet/servers; export NSES_SERVER_HOME
    NSES_CLASSPATH=${NSES_SERVER_HOME}/bin/https/jar/NSServletLayer.jar:${NSES_SERVER_HOME}/bin/https/jar/NSJavaUtil.jar:${NSES_SERVER_HOME}/bin/
    https/jar/AdminNativeUtil.jar:${NSES_SERVER_HOME}/bin/https/jar/NSJavaMiscUtil.jar:${NSES_SERVER_HOME}/bin/https/jar/servlet.jar:${NSES_SERVE
    R_HOME}/bin/https/jar/servlet-2.3-filters-api.jar:${NSES_SERVER_HOME}/bin/https/jar/jsp092.jar:${NSES_SERVER_HOME}/bin/https/jar/jaxp.jar:${N
    SES_SERVER_HOME}/bin/https/jar/crimson.jar:${NSES_SERVER_HOME}/bin/https/jar/xalan.jar:${NSES_SERVER_HOME}/bin/https/jar/jspengine.jar; expor
    t NSES_CLASSPATH
    LD_LIBRARY_PATH=${NSES_JRE_RUNTIME_LIBPATH}:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
    ...and the JAR file itself exists:
    soft2:/usr/iplanet/servers/https-admserv >ls -alt /usr/iplanet/servers/bin/https/jar/NS*
    -rw-r--r-- 1 root other 191337 Jul 17 2002 /usr/iplanet/servers/bin/https/jar/NSServletLayer.jar
    -rw-r--r-- 1 root other 2856 Jul 17 2002 /usr/iplanet/servers/bin/https/jar/NSJavaMiscUtil.jar
    -rw-r--r-- 1 root other 29941 Jul 17 2002 /usr/iplanet/servers/bin/https/jar/NSJavaUtil.jar
    Here I show that the class iPlanet is complaining is in the NSJavaUtil.jar file:
    soft2:/usr/iplanet/servers/https-admserv >jar tvf /usr/iplanet/servers/bin/https/jar/NSJavaUtil.jar | grep Log
    3403 Wed Jul 17 13:54:22 GMT+10:00 2002 com/iplanet/server/http/util/LogUtil.class
    502 Wed Jul 17 13:54:22 GMT+10:00 2002 com/iplanet/server/http/util/LogUtil$LogWriter.class
    If I modify the start-jvm file so that NSES_JDK points to an older version of the JDK ( /usr/Solaris_JDK_1.2.2_07 ) ... or a newer one ( /usr/j2sdk1.4.0_02 ) ... then the admserv instance starts up.
    Having said that, in an effort to try to replicate the problem, I tried the same JDK upgrade on another Solaris8 SPARC installation, also with iPlanet 6.0 SP4. That one worked fine with any problems. The admserv instance started fine after the upgrade.
    The only different thing that I did was:
    1) I first told iPlanet6 to point to a different JDK location ( JDK 1.3.1_03 in /usr/j2sdk1_3_1_03 ) before the upgrade ....
    2) restarted the admserv instance ...
    3) install JDK 1.3.1_07 ( /usr/j2se )
    4) told iplanet6 to point to the JDK 1.3.1_07 ( /usr/j2se )
    5) restart the admserv instance
    Why would it not work with one installation and not the other ?

    This maybe the final clue. I did a truss via:
    truss -f ./start -start 2&> err
    ... and this is what I get just before the NoClassDefFoundError exception ( look at the SIGSEGV ):
    22780: lwp_mutex_lock(0xFEBC5558) = 0
    22780: lwp_sema_post(0xFCE03E30) = 0
    22780: lwp_sema_wait(0xFCE03E30) = 0
    22780: lwp_mutex_wakeup(0xFEBC5558) = 0
    22780: lwp_mutex_lock(0xFEBC5558) = 0
    22780: Incurred fault #6, FLTBOUNDS %pc = 0xF900A8FC
    22780: siginfo: SIGSEGV SEGV_ACCERR addr=0xFE427F68
    22780: Received signal #11, SIGSEGV [caught]
    22780: siginfo: SIGSEGV SEGV_ACCERR addr=0xFE427F68
    22780: sigprocmask(SIG_SETMASK, 0xFEBBEFE8, 0x00000000) = 0
    22780: mprotect(0xFE424000, 16384, PROT_READ|PROT_WRITE|PROT_EXEC) = 0
    22780: sigprocmask(SIG_SETMASK, 0xFEBCAD68, 0x00000000) = 0
    22780: setcontext(0xFE42B938)
    22780: time() = 1049546821
    22780: poll(0xFD007A40, 0, 10) = 0
    22780: getpid() = 22780 [22778]
    22780: write(6, " [ 0 5 / A p r / 2 0 0 3".., 111)     = 111
    22780: lwp_sema_post(0xFCE03E30) = 0
    22780: lwp_sema_wait(0xFCE03E30) = 0
    22780: lwp_mutex_wakeup(0xFEBC5558) = 0
    22780: lwp_mutex_lock(0xFEBC5558) = 0
    22780: getrlimit(RLIMIT_STACK, 0xFFBEAFAC) = 0
    22780: mprotect(0xFFB72000, 16384, PROT_NONE) = 0
    22780: mprotect(0xFFB70000, 8192, PROT_NONE) = 0
    22780: poll(0xFD007A40, 0, 10) = 0
    22780: brk(0x004BB7F0) = 0
    22780: brk(0x004BD7F0) = 0
    22780: time() = 1049546821
    22780: getpid() = 22780 [22778]
    22780: write(6, " [ 0 5 / A p r / 2 0 0 3".., 93)      = 93
    java.lang.NoClassDefFoundError22780: write(2, " j a v a . l a n g . N o".., 30) = 30

  • Problems with opening iBA books after the recent upgrade.

    How many folks have had problems opening .iba books after the recent upgrade??
    I did !  I completed and delivered a free book which was No: 9 in series - all the others opened OK in iBA after the upgrade except this last one.
    I read the forum, none of the offered solutions worked for me.
    I contacted support and was eventually asked to upload to there server the original .iba file which I did a few days back.
    Today I had a reply to advise they had found and corrected  the probem and gave me  server access info to download a revised file.
    The problem turned out to be the "Intro Media" I had dropped an image and not a video, which I have done before without probelms.
    Apple support have removed it and the book file opens OK.
    I dont know if this will help others who had problems opening files in iBA after the update.
    It does seem as though the delivery of content acceptance critera is getting tighter or maybe its my own fault for doding the requirements!

    Its seems like the application load may have not completed properly or there were some issues.
    Backup all the data on your device then follow the below articles.
    How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Manager for...
    In the article below there is a section on how to restore selective data.
    The databases you probably want to restore are:
    Messages
    Address book
    Calendar
    Tasks
    Memo Pad
    Content store
    (Any others that you think you will want)
    How to restore data to a BlackBerry smartphone from a backup file 
    Hope this helps.

  • 10.4.11 problem with first generation macbook

    hey guys, my parents just installed the 10.4.11 update on their mac running 10.4.10, and my dad did the update, it installed everything, restarted twice like normal, but on the second restart, its been on the start up screen with the apple logo, and white screen with the spinning cursor for 20 minutes now. we called support but they were closed. We've considered restarting, but we dont want to possibly ruin the partition, we put our ear to the harddrive area, and there is absolutley no activity, all we hear is the fan blowing really really hard. What should we do guys, we need your expertise. thanks in advance.

    I had the same symptoms you described, but I have managed to boot my system twice now. First, I ejected a DVD I had in the drive, Second I disconnected my external monitor from my laptop, third I held down the power until it shuts down. But that's not the end.
    When I restart my macbook pro, the spinning thing sits there for a while, I push the power button...but only a standard half second push, which seems to break the apple out of the endless spinning icon.
    Everything seems normal, and booting continues,...I have to do this the last 2 times, which really isn't acceptable, but better than not having my computer.
    I haven't had any adverse effects, but do this at your own risk.

  • Problems with iTunes and iPhone after PC rebuild...

    Greetings all,
    Recently, I had to rebuild my PC after a RAID adapter change wiped my array. I reloaded iTunes and went through "authorizing the computer" but it will not allow me to move my apps from my 3G to the itunes. If I enable the sync flag it says it will blow all the apps away on the phone.
    I got this for each application from the iphone configuration console:
    Mon Jul 6 22:56:14 unknown mobile_installationd[159] <Error>: 00808600 storebinarydict: Could not create /private/var/mobile/Library/MobileInstallation/ArchivedApplications.plist: Permission denied
    Mon Jul 6 22:56:14 unknown mobile_installationd[159] <Error>: 00808600 : stat /private/var/mobile/Library/MobileInstallation/ArchivedApplications.plist uid=0 gid=501 p=100644
    Mon Jul 6 22:56:14 unknown mobile_installationd[159] <Error>: 00808600 : stat /private/var/mobile/Library/MobileInstallation uid=501 gid=501 p=40755
    Mon Jul 6 22:56:14 unknown mobile_installationd[159] <Error>: 00808600 MobileInstallationRemoveArchive: Could not store /private/var/mobile/Library/MobileInstallation/ArchivedApplications.plist
    Mon Jul 6 22:56:14 unknown mobile_installationd[159] <Error>: 00808600 handleremovearchive: API failed
    Mon Jul 6 22:56:14 unknown mobileinstallationproxy[217] <Error>: handleremovearchive: Uninstallation failed
    Any help much appreciated!!
    C

    bump
    Anyone??

  • Problems with Flip Words Game after recent ios upgrade on my iPad2

    After I installed the latest version of ios on my ipad2, the font type has changed and now my Flip Words game is not able to be played because of a new black border across the top of the game screen showing my ipad wifi signal, time and battery status.
    How can I get this removed, or back load to the previous version of the ios software?
    Current version is: 7.1.(11D167)

    Hi billfrombowie,
    If you are having issues with one of your apps after updating to iOS 7.1, you may find the following article helpful:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Regards,
    - Brenden

  • Why am I experiencing problems with Facetime for iPad after iOS 6 upgrade?

    I recently upgraded my iPad 3 to iOS 6. Everthing works fine except Factime. Everytime I try to Facetime I get a message saying "email is already in use". I've tried creating a new email account and it still won't allow me access to my Facetime. Any advice?

    You can't downgrade your iOS version.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • Problems with accessing stolen iPhones icloud storage... help!

    I recently had my iphone stolen, luckily icloud backed it all up. I now want to manage my icloud storage as I have no room left to back up my new iphone. how do i access the old phones storage without just completely deleting it?

    Yes and I took that option, so this current iPhone has all my contacts etc but I'm scared to delete the old iPhone iCloud since not all my photos are on this phone? I just need to be able to access it so that I can sift through what I want to keep and in order to free up my iCloud space
    Thanks

  • Problems with Warp Stabilizer -Testversion After Effects, who can help ?

    Hey can someone tell me why the Warp Stabilizer is not working at the testversion. Is is only activ on the registrated version ? Wanna figure out whats better at this stabilizer compares to the final cut Motion 3 d stabilizer befor i buy a expensive software that doesn´t make it better, thanks a lot for any answer..simon germany

    thanks..will wait and try....thanks for the link
    Am 17.04.2011 um 05:57 schrieb Todd_Kopriva:
    The trial version will be available in May. See http://blogs.adobe.com/toddkopriva/2011/04/improved-trial-version-for-after-effects-cs5-5. html.
    >

  • Home video not appearing in Videos/Movies after syncing with first generation iPad.

    Why is my home video in Shared Libraries but not Movies after syncing with first generation iPad?  It appears in Movies on iPad2 and iPad3.  I've already changed Media Kind to "Movie."  I didn't have this problem 1 month ago when syncing a new video.  Is there a software update issue?  iPad says software is up-to-date.

    The video app has 4 tabs across the top.  If they are not hiding  in one of the  tabs, i suspect they are missing the type identifier and the app doesnt know where to show them.  Glas that at least you can find them.
    Next time you sync, take a look in i tunes, and see if they are fully labeled there.  I would not be surprised if one the i tunes fields is the key for the pad video app to know which tab to put the, under.

  • What to do with an unused first generation iPhone

    I've got a brand new first generation iPhone.
    I have no desire to use it as a phone.  I'd like to use it as nothing more than an mp3 player and wifi stuff in the coffee shops.
    I've googled how to do it, but I came up with all kinds of complex stuff that I don't understand.  One article says it involves doing unauthorized stuff to the phone (gave way too complex instructions for unlocking the thing) ... another more recent article says that Apple is not objecting to people using old iPhones simply as iPods.
    But nowhere have I found a tutorial that will get me up to speed ... something written to a techno-simpleton like me, with no real understanding of iPhones or computer terminology.
    Can anyone point me to a very simple tutorial on how to convert a first generation iPhone ... probably one of the first ever made ... into a non-phone media player and wifi surfer?
    And is Apple in fact okay with this?
    -JOHN

    The iphone is designed to only be used once it has been activated with a carrier.
    Once it has been activated, then it can be used without a wireless plan.
    Using an iPhone without a wireless service plan

  • First Generation iPhone - can't seem to activate Bluetooth functionality

    I upgraded my first generation iPhone with V2.0 software, unfortunately I can't turn on Bluetooth functionality at all - can't even get to the point of trying to pair with a Motorola headset.
    I go to Settings>General>Bluetooth and move the switch from off to on. The little gray gear symbol just turns until the phone switches off automatically (about 2 minutes).
    Is this a problem with the new software?
    Thanks,
    Gail

    Gail... I had this same problem back in January 2008 with the first update of the year, I have a bluetooth adapter in my stereo system in my truck so I can have hands free calling that come out over the stereo system. I installed this adaptor in the beginning of Dec 2007 worked beautiful till the Jan. update. After the update everytime I got in the truck and turned the stereo on it would pair then freeze the iphone, sometimes it would completly shut it down, I was mad!!! After about a week of this I just disabled the bluetooth. After the March 2008 update all was back to normal, bluetooth worked beautifully again! I have not had any problems since then. I have not updated to 2.0 and after reading all the forums today I am gonna hold off for a while. You probably just need to wait till the next update, unfortunatly. Hope this helps!

  • Reactivating first generation iPhone?

    So I currently have a 3GS (had it since it first came out) so I know, it's time to buy a new one. But because I just can't afford it I've just kept using it, which was never a problem. That is, until I made the terrible decision to download iOS 5 on it. Now I can't receive any incoming texts, which is a huge problem. I still have my first generation iPhone so I thought maybe I could reactivate it just until I can afford to get a new phone in a couple of weeks. But whenever I try to activate it (after putting my current SIM card into it) the activation process never fully works. I was wondering if it's just not really possible to reactive a first generation iPhone or if something's just going wrong? Any advice would be appreciated. Thanks!

    I'm talking about your 3GS.
    If you didn't lose "everything" by installing iOS 5 on your 3GS, you won't lose "everything" when restoring the 3GS with iTunes.
    Where you do get you will lose everything on your iPhone when restoring it with iTunes?
    All iTunes content on your iPhone - all music, movies, tv shows, podcasts, ringtones, audio and print books, and 3rd party apps should be in your iTunes library on your computer. All photos on your iPhone that were transferred from your computer should remain on your computer. Photos and videos in your iPhone's Camera Roll can and should be imported by your computer as with any other digital camera. Contacts, calendar events, and Safari bookmarks are designed to be synced with a supported app on your computer so all this data should be available on your computer as well. This leaves data such as iPHone settings, SMS/MMS, and 3rd party app settings and data created and stored by a 3rd party app which is included with your iPhone's backup.
    If you switch to your original iPhone, you won't have all the data that is on your iPhone 3GS available on the original iPhone anyway.

  • Forgot the password to my first generation iphone, how to unlock it now please help

    I forgot my first generation iphone password, my iphone gives me this message "iphone is disabled and connect to iunes" when I connect to itunes get another message please enter your password.  Please help if anyone had this problem before

    If you restore the phone from backup on the LAST computer the phone synced with, this will remove the passcode. If you do not have access to the last computer the phone synced with, you will have to force the phone into recovery mode & restore it as a new device to remove the passcode:
    Turn the phone off using the Sleep/Wake button, then the slide to power off. If you are unable to do that, press and hold the Sleep/Wake and Home buttons at the same time. When your phone turns off, release the Sleep/Wake and Home buttons. Then, leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, you will only be able to restore as a new device.

  • First Generation iphone static from receiver

    My first generation iPhone has static coming from the receiver. When I am on the phone the other person does not hear it. The distortion made by receiver is very annoying. The static last for about 10 seconds. It started happening last week. I have the latest update. I did the restore twice. I am headed to the apple store tomorrow. I only got 25 days left on the warranty. I wanted to know if this was a common problem.
    Message was edited by: Jay Pat
    Message was edited by: Jay Pat

    The phone was purchased off eBay, and it was unused brand new when it was purchased...and it was unlocked.
    What part of the the iphone 2G was never sold anywhere in the world officially unlocked, other than France, do you not understand? Fact is, your phone was "hacked" to unlock it, which is common with iphones purchased on ebay. There are posts daily here just like yours. There is no way to officially unlock your phone, as AT&T does not offer unlocking and they would be the only ones who could unlock yours. As already stated: ANY ATTEMPT to update software or restore a "hacked" iphone will re-lock it to the carrier it was originally locked to. You have three choices: 1. Sell it and buy a phone you can use, 2. Take it back to the US & activate it on the AT&T network(very expensive to use where you live if you do that), or 3. Enjoy it as a paperweight.

Maybe you are looking for