Problem with Fiscal Period and regarding...

Hi all,
         I have a particular query in which posting period and fiscal year are the characteristic variables(mandatory and single values) . I have to define Rolling Year To Date variable/ User exit such that when the user enters posing period and fiscal year query has to fetch previous 12 periods data from the cube..
       If posting period is 005 and fiscal year is 2007 then the output for a particular balance Keyfigure has to be from 005-2007 to 006-2006.
     The thing is we dont have Fiscal period defined in the cube . One possible solution is Using the Offsets if we are are goin to offset on the previous 12 periods, is the query going to fetch the correct values.
    Other thing we can think of is user exits can some one share the logic regarding this... if we have to user the user exits. Promise to award full points.
regards,
sasidhar gunturu

Sasidhar,
Since you have posting period and fiscal year separately, you need not think of going for an exit. You can simply use offsets on both so that they will fetch right data. Since there are two separate objects offsets should fetch correct data. Go ahead with offsets.....

Similar Messages

Consolidating with fiscal periods and calendar periods

Hi, Does anyone have any information out there on how to configure the system to pull data for fiscal period for some companies and calendar period for other companies? Or any horror stories about trying to do it that way.
Thanks.

Stacy,
For consolidation as a whole only one fiscal year variant is allowed. However, there is possibility of collecting data of different fiscal year variant and using appropriate currency translation rates as per that units fiscal year variant.
For example, if you have consolidation fiscal year variant as 31st March ending and you have one unit X as fiscal year variant 31st december ending, in this case the 12th period data of consolidation unit X will be translated using exchange rate as on 31st dec and not as on 31st March.
Hope this might be helpful to you...though no direct response to your question.
Best Regards,
UR

Using fiscal period and Fiscal quarter reporting seemlessly in a BI Query

Hi,
We have a very specific issue. Reporting the Fiscal Period( in our
case we have 53 fiscal periods) and Fiscal Quarter( we have 4 quarters)
in the same query seamlessly as we would have done using Calander Month
and Calander quarter in other reports that uses SAP delivered standard
time dimensions.
However unlike the Calander time dimension (SAP provided all
possible...0CALDAY, 0CALWEEK, 0CALMONTH, 0CALQUARTER, 0CALYEAR) where you have all of these inside your info provider, you can get
aggregation on week, month, quarter etc in your query seamlessly, The Fiscal Year/Period offers a problem in doing report seamlessly.
When we delve into Fiscal realm, SAP only provided with 0FISCVARNT,
0FISCPER, 0FISCYEAR and a special period 0FISCPER3. It doesn't provide
anything like 0FISCQUARTER etc and rightly so, because you can have
only one 0FISCVARNT in the Time dimension and can have related periods
(0FISCPER) only for a Row of data in your infocube. For example if you need to model as per the Fiscalweek, you can create a custom Fiscal year variant (Say z1) and can configure to have only 53 periods (Mapped to 0FISCPER) representing
53 Fiscal WEEK. Similarly for mapping Fiscal Quarter you can create
another fiscal year variant (Say Z2) and have only 4 periods (mapped to
0FISCPER also in this case) to represent the 4 Fiscal Quarter. However
the issue is that for one record you can only map either of those and
not both since you can only have one Fiscal year variant in one row of
data in the info provider.
For example
If I have two rows OF DATA coming from different sources (One FOR
Fiscal Week and another for Fiscal Quarter) I can have the following in
my info provider.
1> Example data in Fiscal
Char1 Char2 0CALDAY 0FISCVARNT 0FISCPER Quantity
X ...... y .....10/22/07 ....Z1 .... 432007 .......10
X ....... Y .....10/22/07 ....Z2 .... Q32007 .......20
The issue is how do I report the Quantity in a query in Quarter Q3 as
(10 + 20 = 30) since both the rows corresponds to FISCAL Q32007?
(Please note that Fiscal week 432007(For VARIANT Z1 ) actually is
Fiscal Quarter Q32007( For Fiscal Variant Z2) as per our
configuration of Fiscal Year Variant configuration Z1 and Z2)
The same is very simple when I have infoprovider with CALENDAR Time
dimensions , for example if we dont have any fiscal reporting
requirement and just report on calendar time dimension the record in
the info provider would look like the following ( example)
2> Example Data in CALENDAR DIMENSION
Char1 Char2 0CALDAY 0CALWEEK 0CALQUARTER Quantity
X ........ y .......10/22/07 .......432007 .......Q32007 .......10
X ........Y .......10/22/07 ....... 442007 .......Q32007 .......20
Here we can use both 0CALQUARTER and get the data aggregated on the
quarter level in addition to the 0CALWEEK.
To solve this issue, One option that we are thinking of Using 0CALQUARTER to represent the
Fiscal Quarter and use Update rule to populate this one. For example
THE example 1 can be as follows.
1A> Example of using 0CALQUARTER along with 0FISCVARNT and 0FISCPER
Char1 Char2 0CALDAY 0FISCVARNT 0FISCPER 0CALQUARTERE Quantity
X .......y .......10/22/07 ..............Z1 .......432007 .......Q32007 ..............10
X .......Y .......10/22/07 ..............Z2 .......Q32007 .......Q32007 ..............20
In this case we would populate the 0CALQUARTER by the actual Fiscal
Quarter and then can use both as per example 2 above. But this is not a
smooth option since we have various other info providers to join and
report based on solely Fiscal Quarter etc
I am certain that this issue have already been solved by somebody as this bound to happen in any finance application.
Would appreciate if we can get some light on this regarding the data modelling, reporting etc.
Thanks
Arun G.

You have yourself suggested a solution, which is fine,
Other option is to have a new characteristic Fiscal Qtr in all the infoproviders ans update the same using a routine in the updaterule depending on the fiscal year variant.
for eg. for transaction with variant Z1 in one case you can say if fiscal week 01 between 01 to 13 the Fiscal Qtr should be update with1 and if it is between 14 to 26 then update fiscal qtr with 2 and so on.
For other Variants Z2 you write a different login in the routine ans so on.
so for all the data irrespective of the variant you will have the qtr as either 1 or 2 or 3 or 4 and you can report on this fiscal qtr.
assign points if it helps.
regards
Venkata Devaraj

Fiscal Period and MM period.

Hi all,
Can somebody explain the difference b/w Fiscal Period and MM Period in business context. Detail explanation will be helpful.
thanks & regards,
Prashant Rathore.

Dear,
Fiscal Year Definition
Usually a period of twelve months for which a company regularly creates financial statements and checks inventories.
The fiscal year may correspond exactly to the calendar year, but this is not obligatory.
Under certain circumstances a fiscal year may be less than twelve months (shortened fiscal year).
Fiscal Year Structure
A fiscal year is divided into posting periods. Each posting period is defined by a start and a finish date. Before you can post documents, you must define posting periods, which in turn define the fiscal year.
In addition to the posting periods, you can also define special periods for year-end closing.
In General Ledger Accounting, a fiscal year can have a maximum of twelve posting periods and four special periods. You can define up to 366 posting periods in the Special Purpose Ledger.
What is the Use of Fiscal Year
In order to assign business transactions to different time periods, you must define a fiscal year with posting periods. Defining the fiscal year is obligatory.
You define your fiscal year as fiscal year variants which you then assign to your company code. One fiscal year variant can be used by several company codes.
You have the following options for defining fiscal year variants:
Fiscal year same as calendar year
Fiscal year differs from calendar year (non-calendar fiscal year). The posting periods can also be different to the calendar months.
You define your fiscal year variants in Customizing for Financial Accounting as follows: Financial Accounting Global Settings ® Fiscal Year ® Maintain Fiscal Year Variant (Maintain Shortened Fiscal Year)
MM Periods
Closing operations are periodic tasks and can be subdivided in FI as follows:
u2022     Day-end closing
u2022     Month-end closing
u2022     Year-end closing
The closing operations component helps you prepare and carry out the activities required for day-end, month-end, and year-end closing. For this purpose, the system provides a series of standard reports that you can use to generate evaluations and analyses directly from all of the posted account balance. The system helps you carry out the following:
u2022     (Time-based) accruals/deferrals of expenses and revenues
u2022     Creating the balance sheets and P&L statements
u2022     Documenting the posting data
Prerequisites
To carry out the closing operations in G/L accounting, you first need to carry out the closing operations in the subledger accounting areas you are using. These include:
u2022     Accounts receivable and accounts payable accounting
u2022     Inventory accounting
u2022     Asset accounting
u2022     Payroll accounting
Regards,
Syed Hussain.

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

Problem with sales order and Service order

Dear Guru's
We have a real problem with sales orders and service orders and how we treat these. For a project that uses a WBS, it's not a problem to manipulate SAP to give us a list of shortages (orders with no or limited supply) for each order, but for some reason our after sales orders and our service orders do not work this way.
Thanks and Regards,
Deethya.

CLOSED

DP Planning in Fiscal Periods and Fiscal Weekly Periods

Hi,
We are using fiscal calnedar that starts on first Sunday of Nov with 4 weeks in each period i.e., fiscal year 2009 started on Nov 2nd (Sunday) and first period goes from Nov 2nd (Sunday) to Nov 29th (Saturday) and so on.
So, our fiscal week also starts on Sunday and ends on Saturday i.e., in first period of 2009 the following are the fiscal weeks
1 fiscal week - Nov 2nd to Nov 8th
2 fiscal week - Nov 9th to Nov 15th
3 fiscal week - Nov 16th to Nov 22nd
4 fiscal week - Nov 23rd to Nov 29th
1 fiscal period - Nov 2nd to Nov 29th
In storage bucket profile we are able to assign only one fiscal period profile. There is no place to consider fiscal weeks.
Created two planning books as follows
1. Planning book with time bucket profile of fiscal periods. It is allowing me to plan in fiscal periods and works as expected
2. Planning book with time bucket profile of fiscal weeks. It is not allowing me to plan in fiscal weeks
How to make the fiscal weeks planning book work?
Thanks in advance,
Srini

What version are you using? We asked for this in 2003 at ASUG and although it was delivered in 4.1 we never got it to work, but when we upgraded to 5.1 it works perfectly.
Define 1 storage bucket profile with fiscal weeks and 2 planning bucket profiles, one with fiscal weeks and the other with fiscal months. Then define your planning area with the SBP fiscal week. Within interactive planning, turn on the header functionality. Choose the first icon on the upper left corner of the planning grid and choose "change periodicity" and you can switch from "fiscal weeks" to "fiscal months".

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

Problem with purchase orders and cancelling order lines

Hi,
We have a problem with purchase orders and cancelling order lines. For example we have created PO no. 4300291277:
We have made a GR 5000186897 on 03.09.2010 amount 1.920 and tried to cancel it with GR 5000208866, but it takes the invoice amount 1.724 instead of 1.920. What is the correct way to undo this orders, so we cancel the 1.920 and not the 1.724?
Please help me, your help will be highly appreciated.
Regards,
Najma.

hi,
You have to cancel the IR first...and then do cancel the GR...
yes, there will be diff. in the price(if the price changes in bwtn)..if no changes in the price , the price will taken as old one..
Process:
1. Cancel IR
2. Then cancel GR..
3. then go the PO and try to delete the line item..
Regards
Priyanka.P

Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
All worked OK with ISO 6.

Hello CraigNicholson
You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
Regards,
-Norm G.

Problem with m3u files and Quicktime

Hello:
I have made one update with Quicktime software (version 7.6.9 1680.9). The problem is that Quicktime player reproduces mp3 files but when I try to play m3u files the sound is very bad. It sounds like gargling.
For example: This files play ok:
http://www.telefonica.net/web2/sevarra/Sarabande.mp3
It plays ok when the previous link is introduced as URL address in Quicktime player, but the corresponding m3u files sounds like gargling
http://www.telefonica.net/web2/sevarra/list0.m3u
I think there a problem with m3u files and Quicktime.
Tank you very much and best regards.

I have discovered that when the URL is playing (with gargling sound) if I open the A/V controls in QT menus and I move the Jog Shuttle or the Speed level then the sound becomes good.
Yes! Great catch, ttfrank. I can replicate that too.
Interesting ... if (after getting the sound working properly again) you then pause play of the m3u, and start it again, you get the gargling/dalekish sound quality back again.
Bug reporting ... there's a couple of ways you can go about doing this. You can use the QuickTime product feedback form:
http://www.apple.com/feedback/quicktime.html
... but if you want to track progress on the bug, try instead registering as an Apple Developer (for free):
http://developer.apple.com/programs/register/
... and then you'll be able to submit the bug via the Apple Bug Reporter:
http://developer.apple.com/bugreporter/
In the meantime, there's also a restricted forum available to level 4 and 5 members ("Notable New Technical Issues") where we can report this sort of thing. I'll try to get a post written up on the topic there later today.

E-Recruiting: Problems with search profile and serach templates

Hi Recruiting-Experts,
I´m facing problems with "Search Profiles" and "Search Templates"
(Customizing SPRO --> SAP-E-Recruiting --> Recruitment --> Talent Warehouse --> Candidate --> Candidate Search )
Out customers wants me to add a new search criterion to the talent search. It's a customer-field (type 'd' --> Date) belonging to infotype 5106.
Unfortunately, it doesn't work. The hit list is always empty.
What I did:
Customizing (see above)
Updated search profile (report RCF_RECREATE_SEARCH_PROFILES)
The result:
I can see and choose the new search criterion on talent warehouse search site (recruiters startpage)
I can find the data (internal format yyyymmdd) via transaction SKPR07 (see XML below, ZZEARLIEST_ENTRY 20090901)
By the way, the hit list is also empty when adding and searching for birthdate.
Has it got to do with the date stored in internal format?
Thanks for any comments / help.
Regards
CHRIS
=========================================================================

Hi Sebastian,
thanks for your quick answer.
That's why I didn't get it done for hours yesterday.
Thanks again,
Regards
CHRIS

I hve pop up from adobe that tell me they have problem with my paiement and billing information and to go in my account or my lisence will stop working in 25 days

I have pop up from adobe that tell me they have problem with my paiement and billing information and to go in my account or my lisence will stop working in 25 days again... I can't find anything wrong in my account infos. What do I need to check and change? Adobe takes the money directly on my credit card since almost 2 years and I haven't change anything sicne then. The expiration date is good. Also, I'm not able to contact the Adobe support, it's not available.

ImprimerieModerne, my response of about being unable to find the CC was for Kathy P. The issue that you are facing is being worked upon.
I am sorry for the confusion.
Regards
Rajshree

I have a problem with my bluetooth and Wi-Fi, it seems not to connect and just keep searching

i have a problem with my bluetooth and Wi-Fi, it seems not to connect and just keep searching

Hello there, charles.
The following Knowledge Base article offers up some great information and links in regards to things that can interfere with both Bluetooth and Wi-Fi:
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/ht1365
Additionally the following articles offer specific steps for each:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
and
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Problem with Fiscal Period and regarding...

Similar Messages

Maybe you are looking for