Problem with flash in events packaged application
Hi,
I´v installed the Events packaged application.
On page 24 you can show some flash-reports. But I get an error: xml loading failed (flow_flash_chart_Rxxxxx).
What can be the reason? serverside or desktopside?
Any reaction will be appreciated.
Leo
Try the following
close all browser windows and open Windows Explorer
in the address bar type %appdata%\Adobe
delete the 'Flash Player' folder in there
in the address bar type %appdata%\Macromedia
delete the 'Flash Player' folder in there
Now try again to change any Flash Player settings.
Similar Messages
-
Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any Ideas of how to solve this one?After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Problem with flash on IE11 after using adobe cleaner
Problem with flash on IE11 after using adobe cleaner to remove a trial version of photoshop because there was not any entry on add/remove applications in windows 8.1
Its to frustrating to reinstall everything. I tried everything from your support page with no luck…Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/ -
Error in Events Packaged Application
Hello,
I've been interested for some time in the "Events" packaged application. It was great to see it become available recently. I downloaded, installed, and ran it. It had a problem in changing the calendar type for display. I wanted a daily calendar, showing the hours, and couldn't figure it out.
I went and looked, and on page 201, "Events" region, Calendar attributes, the Calendar Type Column is defined as P1_CALENDAR_TYPE. This should be changed to P201_CALENDAR_TYPE. Once this is done, you can switch to weekly and daily calendars using the buttons on the calendar page.
Hope that saves some others from problems.
Now, I'd like to see how the region could be changed to display 15 minute increments within the hour. How is this possible (is it)? Can someone maybe help me on this portion?
Thanks,
Mike Riley
Vice President - Oracle Development Tools User GroupGuess I should have added: Ideally, I'd like to see this like the Outlook daily calendar, where the events are shown in increments and blocked for the duration of the event (switch to the day view if you use Outlook to see an example).
Thanks,
Mike -
When Upgrading on my laptop from iTunes 10.2.11 to 10.5.0 the message I get is: "There is a problem with this Windows Installer Package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or pacakge vendor.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
I've also spent hours on the phone with both apple and windows technical support specialists. This is very clearly not a windows issue. I've given my computer a clean boot, disable my antivirus and firewall, and then attempted to download (yes, from apple's website). I've delete all of the programs (in the necessary order) and then attempted reinstalling with absolutely no luck. I'm starting to think that there's absolutely nothing I will be able to do. I've also never been able to fine "apple software updater or apple software update on my computer, which is particularly odd because I haven't found a post in this community that answers that question. No, "apple software update" cannot be found by accessing the start menu or anything in the "C drive". Apple software update is also never included in the itunes download package that I get from apple's website (the others, such as bonjour, apple application support, and apple mobile support are). No matter what I do, I always get the mesage at the end of the download, "There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
This may or may not be related to the "apple software update" issue.Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait
-
I've been seeing this since wednesday. And I tried to get rid of iti via support instrcutions including changing startup settings rum-msconfig etc. and I even uninstalled itunes considering there can be a conflict or something. Now I cannot even download the old version, and my hands are tied I Cannot sync new songs to my ipod and I coulnd't download any applications to my new iPhonse 4S. I'M using windows XP by the way. none of the support issues solved my problem yet.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
When trying to install itunes the following appears. There is a problem with this windows installer package. A program for this install to complete could not be run. Contact your support personnel or package vendor. Any help?
a colleague of mine suffers from the same problem. did a quick look on the apple support pages. found many topics covering the same problem.
also saw 1 marked as correct answer... (just browse the discussion pages before you ask, this answer appearantly was sitting there from oct. 14...)
(i'm not on windows, so i can't test...)
good luck!
j.
Correct Answer by Peter Lepere on Oct 14, 2011 3:07 AM
Hi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
HELP!! Itunes wont install on Windows 7. I get an error msg. there is a problem with this windows installer package. A program required to install to complete could not be run. Contact your support personnel or package vendor. WHAT NOW?
Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix. -
OK - I have had intermittent problems with Flash video, basically it gets choppy, usually after about 20 minutes - half an hour of watching - recently this problem has gotten worse - coinciding with a recent system update perhaps? - it's more or less anytime I stream something, and it happens on all browsers, even when the movie has clearly downloaded and is buffered way in advance of the playhead.
On 2 occasions recently leaving the movie to play just to see what happens has led to a kernel panic.
I've heard alot about Flash video generally being a resource hog and not playing ball sometimes - is there a way to solve this issue? Things I have tried - reset sound to 16 bit 44.1 khz in audio/midi manager; fixed permissions; run Tech Tool - everything seems to be fine hardware wise - I think there are some incompatible driver issues that are meesing up RAM usage but have no idea what or how to solve this... Any ideas anybody?
Thanks.If, as you show, you are running 10.5.2, that is out of date. You need to install the 10.5.8 combo updater.
It is also possible that your FlashPlayer is out of date.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe. -
ITunes 10.5 Error Message: There is a problem with this Windows Installer package
When trying to update iTunes to version 10.5, I get the following error message at the end of the installation process:
There is a problem with this Windows
Installer package. A program run as
part of the setup did not finish as
expected.
I have attempted to troubleshoot Windows Installer and it appears to be working properly.After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Can't install itunes on a new Win7 machine. Get a message "There is a problem with this Windows installer package. A program required for this install to complete could not be run"
Have you completed all windows update including service Pack1? If not, please complete all the windows update then follow steps below to re-install all over.
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Problem with Flash CS4. Getting error when rendering the file
Hi,
One of my user is facing problem with Flash CS4.
Whenever he tries to render the file, Flash CS4 throws the below error and only after restarting the application, it works fine for another couple of hrs.
Please some one help me to resolve this issue.
-Prabagaran L.Please post in the Flash forum. This forum is for suite specific issues.
Bob -
Whenever I try to update iTunes to 10.5 I get the message 'There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.'
I then uninstalled iTunes to try and reinstall it but I still get the same message for both 10.5 and previous versions, please help!My situation:
- get error when updating iTunes from 1041 to 1050 or above: "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
My system: XP SP3 with all latest updates.
Found out that the 1051 update fixes a major intrusion possibility during the update process, so I want to get iTunes upgraded to 1051.
Did more research and the following worked (not known if all steps outlined were necessary) (I do not guarantee success nor any more issues as a result):
- ran: MicrosoftFixit.ProgramInstallUninstall.exe (did JUST the patch option).
- ran: Windows Installation Removal Tool.exe (uninstalled JUST the iTunes program installer folder) (this does not remove the actual program).
- removed all apple software update registry entries.
- removed: C:\Documents and Settings\All Users\Application Data\Apple\Installer Cache\(JUST the software updatefolders) (hidden folder).
- removed: C:\Documents and Settings\current user\Local Settings\Application Data\Apple\(JUST the software update folders) (hidden folder).
- DID NOT need to restart
- downloaded latest iTunes update (1051)
- opened using WinRAR
- extracted all files
- ran JUST the apple software update MSI
- it succeeded
- ran JUST the iTunes MSI
- it succeeded
- normally I then uninstall the apple software update program, but DID NOT this time
- DID NOT need to restart
Hope it works for you.
Maybe you are looking for
-
I'm thinking of purchasing a Mac mini to use as a node computer for Logic Pro 8. Before I can do that, however, I need to install the Logic node on the mac mini and put this in the startup items so the node loads automatically when the Mac mini boots
-
Dont receive SMS from ONE person only. I am AT&T, they are Verizon
Since my friend swithed to a BB Pearl, I am unable to receive SMS from her. On her old phone I received them. Since getting the BB Pearl I do not receive them. They show up as sent on her phone but I get nothing. I am on a blackberry curve with AT&T.
-
Problem with trying to update account settings in itunes
Zynga game willnot update and states that i have an issue with account that should be settled first......all i did was cancel paypal due to security concerns. I have a credit card registered in Apple acct. anyway. Cant play the game anymore and c
-
HT3529 I can send but not receiving messages
People have been receiving my messages but I am not receiving theirs?????
-
I'm new to CiscoWorks and inherited 2 LMS 3.2 servers about 2 months ago. Sense the server build in Januray this year, there has not been any updates/upgrades to it at all. The following is the current build info I was able to collect - Integration