Problem with Flash Lite in Nokia 5800 XpressMusic-Problema con Flash Lite en Nokia 5800 XpressMusic

I've got a problem playing videos in YouTube with my 5800. Recently I updated my version of Flash Lite to 3.1, from that day I can't see correctly videos on YouTube, when the the indicator of the bar reaches 1/4 of the totallity of the bar, the sound and image stop, but the indicator continues playing. If i want to see completly a video I have to put the indicator in the start of the bar and wait the load again. Some idea to fix this problem?
Sorry for my English level.
Tengo un problema reproduciendo vídeos en YouTube con mi 5800. Hace poco actualicé la versión del Flash Lite a la 3.1 y desde entonces no puedo ver correctamente vídeos de YouTube, cuando el indicador de la barra alcanza 1/4 de la distancia total, se detienen el sonido y la imagen, pero el indicador continúa como si siguiera reproduciendo, es decir para el vídeo es como si siguiera reproduciendo pero ni el sonido ni la imagen continúan., para ver los vídeos tengo que llevar el cursor de carga al principio y esperar la carga de nuevo, es un problema realmente molesto. ¿Alguna idea para solucionarlo?

Hi,
I have Nokia 5800XM as well. The YouTube videos are playng fine for me. my FW is 40.0.005 with FL3.1
Maybe you need to update your device's firmware and FL version.\
Start Device Manager application on your 5800XM from menu or dialing *#0000#. It will check for new updates and ask you to download them. Remember that these updates are in MBs. I'd recommend update using a WiFi connection or flat-rate data plan.
Best,
// chall3ng3r //

Similar Messages

Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

There is a problem with this connection's security certificate The remote computer cannot be authenticated due to problems with its security certificate. Security certificate problems might indicate an attempt to fool you or intercept any data you send

Hi,
I have this Windows 2008 R2 on which I installed remoteapp some years ago.
Now the certificate expired and I get the message
"There is a problem with this connection's security certificate
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer."
How should I renew the certificate? I already went to certification store and tried to renew certificate with same key but then it says "the request contains nor certificate template information".
Please advise.
J.
J.
Jan Hoedt

Does the computer account have Enroll permission to the certificate template?
From the Server running your CA, run mmc, click File then Add/Remove Snap-in...
Add Certificate Templates and click OK.
Find the certificate template, then right click and select properties. On my CA its call ed RemoteDesktopComputers but might be called something different depending on what what template your certificate is based on.
On the security tab, click Oblect types, check Computers then OK. Enter the Computername and click OK. Then give your computer account Enroll permisssion.
HTH,
JB

Hi. ITunes 11 dont install my pc.. Problem: "There is a problem with this windows installer package. A problem required for this install to complete could not be run. Contact your support personnel or package vendor." Please help me.

Hi. ITunes 11 dont install my pc.. Problem: "There is a problem with this windows installer package. A problem required for this install to complete could not be run. Contact your support personnel or package vendor." Please help me.

Repair your Apple software Update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU in All programs, go to control panel/
XP- add n remove Programs/highlight ASU, CHANGE then REPAIR.
Vista or Win7 - Programs n features/highlight ASU and click REPAIR

Since I upgraded to 10.7.2 lion I have these problems with Time Capsule. What is the problem? thanks

since I upgraded to 10.7.2 lion I have these problems with Time Capsule. What is the problem? thanks

Unable to access disk image backup "/ Volumes / Time Capsule / iMac Admin. Sparsebundle" (error -1).
Then?????

I have a problem with google safe browsing, I have a problem with google safe browsing

I have a problem with google safe browsing, I have a problem with google safe browsing

Hello mitjarak1,
I would be be concerned too if I was not able to update my iPhone. If you have not resolved the issue, I recommend following the steps in the article belowfor an issue like this:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
As always, it is a good idea to create a backup before hand:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M.

Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

HP Pavillion DV7 notebook PC
Windows 7 64
intel I5
6 gig memory
service pack 1
I am trying to identify a problem with my HP Pavillion dv7 laptop
Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
any help would be great this PC has a lot of info on it and I dont think it is a lost cause
thanks

Hi duddy, sorry to hear that you are having issues with your computer over heating. I have found a document that will assist you with Restoring the BIOS. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
If you are still having issues, please let me know and I will be happy to offer more assistance..
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Having data problems with ios6, seems to be a unique problem?

My little brother recently bought an iphone 4s and imediately upgraded to ios6. Since the phone has been in use (less than 30 days) the phone company (bell a canadian company) claims he has used up 17 Gigs of data but the iphone counter says he has only used 5 gigs. I realize the counter may not be totally accurate but that big of a difference seems a little crazy. I also have an iphone 4s with the ios 6 and my data usage that my phone counter displays matches what my phone company says almost perfect (a few mb difference). The data amounts come in large chunks on my brothers phone and at very odd times such as: 1456.28 mb at 4:04 am, or 4268.07mb in one session. He does not use his phone for streaming or anything like that, We are aware of what uses large amounts of data and what does not. he uses it for facebook twitter web browing etc.
When talking to tech support one guy said that we could have a "lemon" phone claiming that a known problem with ios6 can cause the data to somehow get "scrambled" and completely making up data usage numbers to send to the phone company. According to him this makes it an apple problem.
My main question is has anyone heard of this? If so I am looking for articles talking abut this problem, we are looking at $1000.00 in overage chrges and are preparing for a fight with the phone company.
The counter has never been reset and I know that I use my iphone 4s much more than my brother (I stream utube and radio stations alllll the time, goole maps etc) and have never once gone over my 6 gb limit. It just seems quite crazy to me that the difference in the iphone data collector (about 5 gb) and what the phone company has (17gb) is so great. To me that is indicating a serious problem. Any input would be greatly appreciated!
Thanks
Crystal

kleptul wrote:
I have upgraded from a SB Li've! to an SB Li've 24-bit, but I HAVE performed a complete format/clean install of WinXP SP2 to try to correct this problem. WinXP at first recognizes the card as a "Multimedia Audio Controller(the whole yellow "!" found in device manager). Upon installing either the drivers that came with the CD or the updated drivers from the website, the card works fine until I start the system up again, and I'm back at square one, having to install either set of drivers again(and rebooting) to have the card work properly once again. But after shutting down AGAIN... It's like I never installed the drivers in the first place. I'm running in a vicious circle here, like WinXP refuses to acknowledge the drivers permanently. I have formatted and reinstalled WinXP SP2 a total of three times now, to no avail. I'm a computer tech of 2 years and have NEVER seen a problem such as this. Each time the device manager comes up as "drivers for this device has not been installed". And from personal experiences/general knowledge, this does not sound like faulty hardware to me. It's THIS kind of instabilaty that makes me actually MISS dos! Um... help?
Hi
Sounds like your system don't recognize the sard (BIOS or OS).
Does your system recognize the card as a "Creative Li've! 24-bit" or something (is PnP functionality in use?) even it don't work? Is BIOS battery well?
Have you tried by installing Li've! in another PCI slot?
Is there some security settings set on XP, and are you installing with full admin rights? Can you find the driver files even when your card is not functioning?
Also, have you tried install drivers by executing the ctzapxx.exe found on installation package.
jutapaMessage Edited by jutapa on 0-06-2006 08:53 PM

Problems with ViaVoice under Leopard, especially key mapping problems

ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Any problems with the recalled hard disk drives, any problems with the recalled hard disk drives

Has anyone had their defective hard drive replaced?
any problems with the Apple service or restarting the machine with a new hard drive?

See this FAQ: http://www.thexlab.com/faqs/freeingspace.html

Siebel Problem With a Workflow Process (Pleaseee help REAL PROBLEM)

Well the problem is this i have a designed a workflow who is called by a JOB. Its functionality is to close Service Requests at certain time in the night.
when i simulate a workflow against 2 different Servers it works fine without errors, but when i run a job that calls this WP in those servers i have diferent errors in diferent steps.
In one server i have this kind of error in the last step "Cerrar Requerimiento":
SBL-EXL-00151
SBL-SCR-00141
SBL-BPR-00162
This operation is not allowed when there are no records displayed.
Please execute a query that returns at least one record or add a new record
and in the other i have this error in the 3er step:
SBL-SCR-00141- Problem Running a eScript
in spanish:
Error de tiempo de ejecuci?n de Siebel eScript en el procedimiento 'GetFieldValue' de BusComp [Action]:
Error: SiebelError: Esta operaci?n no se permite cuando no hay registros mostrados. Ejecute una consulta que devuelva por lo menos un registro o agregue un nuevo registro.(SBL-DAT-00215)
(SBL-SCR-00141)
Error al invocar servicio 'BCH EAI Query Utility', m?todo 'UpdateRecord' en el paso 'Cerrar Actividades'.(SBL-BPR-00162)
(error in the Runtime of the Siebel eScript in the process GetFieldValue of Action,This operation is not allowed when there are no records displayed.
Please execute a query that returns at least one record or add a new record
error invoking the service "BCH EAI Query Utility in the Method UpdateRecord in the step "Cerrar Actividades".
If they have the same job and workflow, and BS's active(i use the BS in other workflows and no problem with it) why they give error in diferent steps but they work fine when i use the Business Simulator?, its there a solution?, this can be a problem about the server config or triggers??
thanks a lot!

Hi,
1.Is you're server and youre client using the same version of SRF ?
2.Is the version for workflow in server and the one youre testing in client are the same ?
3. Last but not least this BCH EAI Query Utility search spec is it correct ? Can it able to return at least one record base on you're search spec because I know some business service are required to return at least one record else it will throw error.
Thanks,
Joey Tan , Malaysia

TS3408 I have a MacBook Air and suddenly Safari cannot find the Facebook server. I am out of my home country but no problem with my iPhone. Laptop was no problem either until now. Any recommendation?

I have a Mac Air and suddenly Safari can't find the Facebook server. I am out of my home countryt but no problem with my iPhone's Safari. Any recommendations? I would like to put some pictures on Facebook from iPhoto. Thanks.

you cannot keep up with all of the interfaces 'cause they do not even allow you to use the older os.
You should be able to upgrade to Mountain Lion via the App Store applicaiton on your Macbook Air.   You do not have to upgrade, but it should be an option.
I can't even get an ichat acct 'cause, help?
iChat can use AOL Instant Messenger accounts (they are free), iChat can use Google Talk (Jabber) accounts (actually any Jabber based chat service).   And if you upgrade to Mountain Lion, you shoul be able to get an Apple iCloud account that can be used with the Messages replacement for iChat (think of Messages as being iChat renamed, with additional features).
Oh and my battery very close to a year after buying it, which is one of the reasons I was so called to it, the battery life. Well, having it stripped down to minimal usage, while working on nothing crazy, I could be cordless from nevver reahing 100% anymore, just under that, but gets to 20 percent in about 3 hours. No audio, no video, light low, it bothers me anyway. Please, this is also a huge problem.
Every battery today, has a limited number of recharges (not just Apple's).   Depending on how many times it has been recharged, will affect how much power it will eventually hold. <http://www.apple.com/batteries/>
I know that generally after about 2 years of use (my use, not yours) I find that my batteries have very little life left in them (I frequently have my devices plugged in, so running fully on batteries only is most likely less than yours).
You can have your battery replaced by Apple (for a fee) or by an authorized Apple repair facility.

HT1338 what about the problems with the trojan virus is that a problem for my mac as well?

What about the problems with the Trojan virus will this be a problem also for me using Mac

What Trojan?
If you're referring to the DNS Changer Trojan, it's highly unlikely you're affected. The actual distribution of the trojan was stopped several years ago and the perpertrators jailed.
The FBI has been maintaining the servers used by the trojan for the last 5 years in order to give affected systems time to be purged. They will finally shut them down on Monday.
Ensure that your router and the Mac's network settings are set for the DNS addresses of your ISP, or if you're not sure what they should be, change them to Open DNS using the IP addresses;
208.67.222.222
208.67.220.220

CNN website problems with Comments section. Scroll and post problems

CNN website, myself and other firefox users can no longer scroll up and down inside a comment when making a post.
Often you can not post the comment with the 'post' button unless page is reloaded.
Problem has been occurring for last week or so.
I have confirmed that other uses on CNN have same problems with firefox.
Problem doesn't occur when using I.E.8
Brgds,
John

I have this problem with IE 8. I cannot post comments on CNN.com. I thought CNN.com might have disabled my ability to post comments but am not sure if they have that ability. Thanks for your help!

Problem with dv7-6140ew - is this a processor problem ? (i7-2630qm).

Hello all
As I mentioned in title I have a problem with hp pavilion dv7-6140ew (i7-2630qm) Win7 64bit.
This is a brand new laptop I bought him few days ago
Of course I notified this problem to the hp support center. But they did not know what it could be.
But may someone will know where the problem is.
I would like also to ask whether this is the normal behaviour?
I have terrible interrupting (It looks similar to old problem with HDD witchout DMA) I saw, that it took place while the kernel process suddenly takes the large amount of the processor space. For instance
by the mcAffee process (the antivirus) but it takes place also with other
(eg at uninstalling of the software). But not always - There is on no rule.
I recorded the example-film with 3dmark03 (I added the music from winamp) and in 0:25 the McSvHost.exe process start - which is visible on the photo.
Check my video http://www.youtube.com/watch?v=dsV861xbVbw
and the photo https://lh6.googleusercontent.com/-Spo2l-5sr3Y/Tpg7l8t2XII/AAAAAAAAC1s/3elBg68MWV4/s720/IMGP4330.JPG
Bios version F.1A, 2011-07-22
Windows 7 64bit
Processor i7-2630qm
4GB ram
Radeon 6770M

Another issue, that I found, is that, If process takes suddenly large amount of processor space in each of 4 core (8 with turbo boost) the error take place. For instance mcAfee process McSvHost sometimes cause such error. But it disappear when I change colligation in task manager for this process to be used by for instance one core.
Does anybody knows what is going on and what cause it ?

Problem with a Dell Monitor - stopped working yesterday, just a flashing orange light. Monitor or Mac Mini issue?

I've been using an old Dell monitor with my Mac Mini ever since I got it, however yesterday evening my monitor stopped working - however I'm not sure whether the issue is with the monitor or the Mac Mini. It just doesn't seem to respond when I try to bring the Mac Mini out of sleep. I can hear that the Mini is responding to the keyboard - I hear the right noise for pressing return on the password box without entering anything.
I've made sure all the cables are plugged in properly (power & connection to the Mini), but all I'm getting is a flashing orange light on the monitor.
I don't have anything else to test the monitor on, nor do I have access to another monitor to plug into the Mac Mini - I only have an old iBook G4, so don't have the right adaptors to plug the VGA from the monitor into that.
So before I run out and buy a new monitor, what is the best way to determine where the problem lies.

Hi, I've actually never had any issues waking this monitor from sleep, this is the first time that it has been unresponsive and I've had it for years - probably over 10! (E151FP) so probably overdue for replacement.
To be honest I'd rather not just switch the Mini off unless it's a last resort given that other than the lack of a picture everything else seems to be working ok - still hearing all the normal noises of Skype, Mail and TimeMachine etc.

Problem with Flash Lite in Nokia 5800 XpressMusic-Problema con Flash Lite en Nokia 5800 XpressMusic

Similar Messages

Maybe you are looking for