Problem with FMR playback in filmstrip -mode
Is it normal when I try to playback full motion recording in filmstrip mode with timeline it plays fine, but when I pause playback (for eg pressing space) playback position reverts back to frame 0 aka begining. This makes adding captions very time consuming as you need to drag timeline with mouse to see if the caption boxes aling with the recording.
Using captivate 4 and 5 with latest updates.
Hello,
If you preview a slide (CP5) with F3 (Playback slide) and pause at at certain point (with F3 or Space) the playhead will stay there, you can align objects to the playhead with CTRL-L. That is the way I'm synchronizing audio with objects. During this kind of 'playback' no SWF is created as is the case with all the other Preview modes. You can also scrub, drag the playhead if you want. Some shortcuts are available as well. I blogged once about the functionalities of the Timeline:
Tiny Timeline Tidbits
I do not understand what you mean by Playback with Filmstrip? Are you talking about the other Preview modes? Then a SWF is created as preview, and you will not be able to stop the Playhead somewhere.
Lilybiri
Similar Messages
-
Problem with video playback with iTunes
Several problems :
Problem with video playback with iTunes -
Since about a week, When I launch a video, it takes a long time to get started, then only the sound starts with no pictures - If I press pause then play the video is played normally. Did anyone face or heard about same kind of issue .
Problem with permission disk errors
After re-installing White Tiger and After I installed the last OSX 10.6.5 update
I found the following problem
Group differs on "Applications / Utilities / AirPort Utility.app / Contents / Resources / wanArrow.png", should be 0 instead of 80.
Last but not least :
My computer seems slow - I have 60gig free on My hard drive and I test my hard drive and everything seems all good .What was the fix for this? Everything has sucked for my itunes video playback since the last major revision release.
-
Just downloaded iOS6 onto my iphone4 and now my playback repeatedly cuts out after a few seconds--a particular problem with podcast playback. Anyone else out there have this problem??
bump
-
TS1702 Problems with the app Drive Safe Mode.
Have other users experienced problems with the app Drive Safe Mode? I can't use it, it's frozen, doesn't do anything at all. I use an iPhone5. I shut off the phone twice, I uninstalled the app and reinstalled it, nothing works. Tks for your help,
samwise57Contact the app's developer. Apple does not provide support for apps purchased from the iTunes Store except the ones they provide like iWork apps.
-
Am I the only person who has problem with video playback ?
I'm having problems with the latest nvidia driver and it seems that nobody wrote about it on the forums.. After installing the latest nvidia driver (169.07-1), the video playback with xv selected will be played in purple and blue colours.. Generally red will not be shown.. So human faces are colored with a combination of purple and blue.. Everything is normal on the other hand.. Sound works perfectly, the movie can be watched smoothly even on fullscreen.. With x11, all players can show the colors but...
1) The movie quality in Totem is very bad then...like the image is gathered together by 3x3 pixels..
2) mplayer shows everything fine but it can't get fullscreen..
I created a nautilus script for a workaround that let's me watch the movies with fullscreen using the -fs -zoom options..
But this problem is really annoying..1.0rc2, with some things disabled that are enabled in the Arch package (lirc, samba, and that live-media thing).
$ pacman -Qs mplayer
local/mplayer-custom 1.0rc2-1
xvinfo:
X-Video Extension version 2.2
screen #0
Adaptor #0: "NV17 Video Texture"
number of ports: 32
port base: 355
operations supported: PutImage
supported visuals:
depth 24, visualID 0x21
depth 24, visualID 0x24
depth 24, visualID 0x25
depth 24, visualID 0x26
depth 24, visualID 0x27
depth 24, visualID 0x28
depth 24, visualID 0x29
depth 24, visualID 0x2a
depth 24, visualID 0x2b
depth 24, visualID 0x2c
depth 24, visualID 0x2d
depth 24, visualID 0x2e
depth 24, visualID 0x2f
depth 24, visualID 0x30
depth 24, visualID 0x31
depth 24, visualID 0x32
depth 24, visualID 0x33
depth 24, visualID 0x34
depth 24, visualID 0x35
depth 24, visualID 0x36
depth 24, visualID 0x37
depth 24, visualID 0x38
depth 24, visualID 0x39
depth 24, visualID 0x3a
depth 24, visualID 0x3b
depth 24, visualID 0x3c
depth 24, visualID 0x3d
depth 24, visualID 0x3e
depth 24, visualID 0x3f
depth 24, visualID 0x40
depth 24, visualID 0x41
depth 24, visualID 0x42
depth 24, visualID 0x43
depth 24, visualID 0x44
depth 24, visualID 0x45
depth 24, visualID 0x46
depth 24, visualID 0x47
depth 24, visualID 0x48
depth 24, visualID 0x49
depth 24, visualID 0x4a
depth 24, visualID 0x22
depth 24, visualID 0x4b
depth 24, visualID 0x4c
depth 24, visualID 0x4d
depth 24, visualID 0x4e
depth 24, visualID 0x4f
depth 24, visualID 0x50
depth 24, visualID 0x51
depth 24, visualID 0x52
depth 24, visualID 0x53
depth 24, visualID 0x54
depth 24, visualID 0x55
depth 24, visualID 0x56
depth 24, visualID 0x57
depth 24, visualID 0x58
depth 24, visualID 0x59
depth 24, visualID 0x5a
depth 24, visualID 0x5b
depth 24, visualID 0x5c
depth 24, visualID 0x5d
depth 24, visualID 0x5e
depth 24, visualID 0x5f
depth 24, visualID 0x60
depth 24, visualID 0x61
depth 24, visualID 0x62
depth 24, visualID 0x63
depth 24, visualID 0x64
depth 24, visualID 0x65
depth 24, visualID 0x66
depth 24, visualID 0x67
depth 24, visualID 0x68
depth 24, visualID 0x69
depth 24, visualID 0x6a
depth 24, visualID 0x6b
depth 24, visualID 0x6c
depth 24, visualID 0x6d
depth 24, visualID 0x6e
depth 24, visualID 0x6f
depth 24, visualID 0x70
depth 24, visualID 0x71
number of attributes: 3
"XV_SET_DEFAULTS" (range 0 to 0)
client settable attribute
"XV_ITURBT_709" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 0)
"XV_SYNC_TO_VBLANK" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 1)
maximum XvImage size: 2046 x 2046
Number of image formats: 4
id: 0x32595559 (YUY2)
guid: 59555932-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x32315659 (YV12)
guid: 59563132-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x59565955 (UYVY)
guid: 55595659-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x30323449 (I420)
guid: 49343230-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
Adaptor #1: "NV05 Video Blitter"
number of ports: 32
port base: 387
operations supported: PutImage
supported visuals:
depth 24, visualID 0x21
depth 24, visualID 0x24
depth 24, visualID 0x25
depth 24, visualID 0x26
depth 24, visualID 0x27
depth 24, visualID 0x28
depth 24, visualID 0x29
depth 24, visualID 0x2a
depth 24, visualID 0x2b
depth 24, visualID 0x2c
depth 24, visualID 0x2d
depth 24, visualID 0x2e
depth 24, visualID 0x2f
depth 24, visualID 0x30
depth 24, visualID 0x31
depth 24, visualID 0x32
depth 24, visualID 0x33
depth 24, visualID 0x34
depth 24, visualID 0x35
depth 24, visualID 0x36
depth 24, visualID 0x37
depth 24, visualID 0x38
depth 24, visualID 0x39
depth 24, visualID 0x3a
depth 24, visualID 0x3b
depth 24, visualID 0x3c
depth 24, visualID 0x3d
depth 24, visualID 0x3e
depth 24, visualID 0x3f
depth 24, visualID 0x40
depth 24, visualID 0x41
depth 24, visualID 0x42
depth 24, visualID 0x43
depth 24, visualID 0x44
depth 24, visualID 0x45
depth 24, visualID 0x46
depth 24, visualID 0x47
depth 24, visualID 0x48
depth 24, visualID 0x49
depth 24, visualID 0x4a
depth 24, visualID 0x22
depth 24, visualID 0x4b
depth 24, visualID 0x4c
depth 24, visualID 0x4d
depth 24, visualID 0x4e
depth 24, visualID 0x4f
depth 24, visualID 0x50
depth 24, visualID 0x51
depth 24, visualID 0x52
depth 24, visualID 0x53
depth 24, visualID 0x54
depth 24, visualID 0x55
depth 24, visualID 0x56
depth 24, visualID 0x57
depth 24, visualID 0x58
depth 24, visualID 0x59
depth 24, visualID 0x5a
depth 24, visualID 0x5b
depth 24, visualID 0x5c
depth 24, visualID 0x5d
depth 24, visualID 0x5e
depth 24, visualID 0x5f
depth 24, visualID 0x60
depth 24, visualID 0x61
depth 24, visualID 0x62
depth 24, visualID 0x63
depth 24, visualID 0x64
depth 24, visualID 0x65
depth 24, visualID 0x66
depth 24, visualID 0x67
depth 24, visualID 0x68
depth 24, visualID 0x69
depth 24, visualID 0x6a
depth 24, visualID 0x6b
depth 24, visualID 0x6c
depth 24, visualID 0x6d
depth 24, visualID 0x6e
depth 24, visualID 0x6f
depth 24, visualID 0x70
depth 24, visualID 0x71
number of attributes: 2
"XV_SET_DEFAULTS" (range 0 to 0)
client settable attribute
"XV_SYNC_TO_VBLANK" (range 0 to 1)
client settable attribute
client gettable attribute (current value is 0)
maximum XvImage size: 2046 x 2046
Number of image formats: 5
id: 0x32595559 (YUY2)
guid: 59555932-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x32315659 (YV12)
guid: 59563132-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x59565955 (UYVY)
guid: 55595659-0000-0010-8000-00aa00389b71
bits per pixel: 16
number of planes: 1
type: YUV (packed)
id: 0x30323449 (I420)
guid: 49343230-0000-0010-8000-00aa00389b71
bits per pixel: 12
number of planes: 3
type: YUV (planar)
id: 0x3
guid: 03000000-0000-0010-8000-00aa00389b71
bits per pixel: 32
number of planes: 1
type: RGB (packed)
depth: 24
red, green, blue masks: 0xff0000, 0xff00, 0xff
xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#Section "ServerFlags"
# Option "XkbDisable" "true"
#EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "ServerLayout"
Identifier "TV Layout"
Screen 0 "Screen_TV" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/artwiz-fonts"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
#Load "dri"
#Load "evdev"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "logiitc"
Option "XkbLayout" "se"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
EndSection
Section "Monitor"
Identifier "Acer AL1923"
#HorizSync 30.0-69.0
#VertRefresh 60.0-75.0
# calc: (x|y)pixels * 25.4 / dpi
#DisplaySize 336 269 # 96 DPI @ 1280x1024
Option "DPMS"
EndSection
Section "Monitor"
Identifier "TV"
HorizSync 30-50
VertRefresh 60
EndSection
Section "Device"
Driver "vesa"
Identifier "VESA"
EndSection
Section "Device"
Identifier "nv"
Driver "nv"
EndSection
Section "Device"
Identifier "NVIDIA GeForce 7600GS"
Driver "nvidia"
BusID "PCI:5:0:0"
Option "NoLogo" "true"
Option "RenderAccel" "true"
Option "AddARGBGLXVisuals" "true"
Option "backingstore" "true"
EndSection
Section "Device"
Identifier "Card_TV"
Driver "nvidia"
Option "TVStandard" "PAL-B"
Option "TVOutFormat" "SVIDEO"
Option "ConnectedMonitor" "TV"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA GeForce 7600GS"
#Device "nv"
#Device "vesa"
Monitor "Acer AL1923"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen_TV"
Device "Card_TV"
Monitor "TV"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "800x600"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
I should probably also mention that I'm rolling my own kernel, and as such I'm not using the package from testing. Building it manually with the PKGBUILD from ABS though so it shouldn't be any difference though.
Last edited by [vEX] (2008-01-15 17:15:36) -
Problem with Opening Outline in edit mode in Essbase
Hi ,
I am trying to open an outline in edit mode in EAS console, but I am getting the followong error
"There is a problem with locking the outline object ,error # 1,051,675"
Kindly help me to fix the issue.
Thanks,
SatheeshDid you try google?
locking th eoutline error (Again a new feature of OTN)
Can you view the outline, if yes try the steps in Error Opening Database Outline in Edit Mode : "There is a problem with locking the outline object, error # 1,051,675" [ID 1491030.1]
I've seen this error (not sure about the number) where EAS cannot allocate more memory (for loading the outline). I'll try stopping apps and start this one and see if it fixes the issue.
Regards
Celvin
http://www.orahyplabs.com -
Problems with audio playback in 10.3.9
hi all- I've got a really weird problem with the audio playback of my G5; when I try and play an mp3 (in Itunes or in the finder window as a preview) the playback "stutters" arbitrarily. This goes for any mp3 - Has anyone come accross this type of problem before?
I've run checks both with my external soundcard (a motu 828 firewire card) and apple's internal sound, but this seems to be some sort of software problem.
HELP!!! I'm tearing the (little) hair I have out!!!
thanks
Lolo
Power mac G5 2x2 Ghz & G4 titanium 667 mhz Mac OS X (10.3.9) 512 ram on G5 and 1 gig ram on G4; both computers are used for audi home studioRight.. 10.3.x doesn't automatically pull down mobile users' files. It only creates a new local account on the machine, but gives you the control over the account through WGM.
BTW- if you want to sync the ~/Library folder, you will need to use 10.4.3 Client (I think) and above.
_Brett -
Problems with the pictures in automatic mode
I bought an xperia Z1 just a few days ago, I just find a problem with the camera flash, when I take a picture in automatic mode.
failure is, when a picture is taken in autmomatic mode, the right side of the picture, left with a bright white shadow, wich is ruining the photos.
I need your help, Its so frustrating, I thought I had made the right decision when I bought this computer, but apparently not
attached a sample image
hopefully you can help me
kind regardsProbably there was something that reflected your flash.I suggest you disable flash in panoramic night shots.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
Wierd problem with video playback getting corrupted
I have a "week 38" iPod Touch 16 that didn't exhibit any negative black issues or other problems.
But ever since I did the 1.1.1 update I sometimes get weird psychedelic colors in the dark areas of the video playback (iTunes purchases or YouTube). A reset (holding both buttons for 10 seconds) solves the problem, but it will sometimes come back a few days later.
Anyone else seeing this?Same thing has happened on my 38 wk model, once.
It happened first on You Tube, so I thought it was a problem with that but, when I checked some videos they were also, 'psychedelic'. Those I knew WERE fine as I had loaded them only that morning and they were beautifully crisp and clear.
I was actually, showing it to a bunch of people at the time and that was a real let down after their initial 'WOW' reactions at the device.
Fortunately, I shut down. And when I restarted, all was back to normal.
Hope it doesn't do it again!!! -
Problem with video playback in adobe premiere pro CS4
Whevener i am to put something into my video. Via it be either A fraps recorded video or a video shot by my camera... i put it in the library and drag it to the stage. then when i play it in Premiere the video just stays as a still picture but the audio plays. It does this with 2 methods i tried (Fraps and my Photosmart M537 Camera). I asked My uncle (who had the same problems with CS3) and he said that hes pretty sure theres something wrong with the Codec. I think thats it because when i put in my video that i had recorded with Hypercam 2. it worked fine. Could anybody please help me?
1 - search the forum for fraps - many problems, few successes
2 - what CODEC is used for your Photosmart M537 Camera?
If that is a STILL camera which has a video mode, you most likely need to convert to DV AVI type 2 with 16bit 48khz sound
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Many of the ideas at the next link are generic enough they have helped some Non-Premiere users fix problems
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of the troubleshooting link -
Problem with video playback on Ipod
I am having a problem I hope someone can help me with. I was given a 30GB Ipod for my birthday. I am running Windows Vista on a 3GHZ machine with 3GB of ram. I downloaded and installed the latest Itunes and Quicktime. I have no problem syncing all my music files, those synced and play properly. When I had Itunes convert some videos I had and sync them, the Ipod does not playback the video correctly. I get about 1 frame every 5-10 seconds. The audio on the video is fine and sounds normal, just the video is freezing. I loaded itunes on my XP notebook and converted and synced the exact same video and it plays great on the ipod. It appears that itunes is corrupting the video during the conversion on my Vista machine. Has anyone else ran into this and if so what is the fix?? I called support and the gentleman told me he had heard of the problem before but said their database was down and he could not access the article. He was supposed to email me the article but I never received it. Thanks for your help in advance.
GaryJust an update, I think I may have found the problem, but not a permanent fix. I failed to mention I am running a raid striped array. I tried inserting a 2gb usb drive with my video file into the computer. I then went into itunes and changed the itunes directory to the USB drive. I then proceeded to have Itunes convert the file for ipod, synced the file and then it played properly on the ipod. I do not have a external drive large enough to hold all my videos. It is either a problem with the raid array or the fact the files are on the boot drive. Anyone have a fix so I can you my computers hard drives??????????
Gary
P.S. Support still has not emailed me the article they were suppose to send. I have 7 days to return the ipod and if I do not get a answer back by then I guess I will return it for something else. -
IOS 6: problem with sprites rotation in gpu mode
Hi,
I have a game published on iTunes and today I found a serious problem with the latest iOS 6 GM.
Sprite rotation around X and Y axes doesn't work with gpu render mode.
Here is my code:
<mx:UIComponent id="gameCanvas" mouseChildren="false" mouseEnabled="false" width="100%" height="100%" />
var gridSprite:Sprite=new Sprite();
gameCanvas.addChildAt(gridSprite,0);
// then I draw stuff on this gridSprite
It works fine if this sprite is not rotated.
But when I change its rotationX or rotationY properties, the sprite disappears from the screen!
My game works fine on older versions of iOS (5.0, 5.1.1 and 6 beta 3).
This problem only happens on iOS 6 GM and since iOS 6 will be officially released in a few days, I am really worried...
I tried Air 3.3 and Air 3.4 - both have this problem.
In "cpu" and "direct" render modes sprite rotation works, but graphics performance is terrible. So "gpu" is my only option...
I'll really appreciate any help.I performed some other tests and so it seems like everything is 2D in gpu mode. When I try to do 3D transformations, objects disappear from the view.
For example out of these 3 images only image1 is displayed:
<s:BitmapImage id="image1" source="logo.png" height="25%" width="100%" />
<s:BitmapImage id="image2" source="logo.png" height="25%" width="100%" rotationY="5"/>
<s:BitmapImage id="image3" source="logo.png" height="25%" width="100%" z="5"/>
Maybe there is some setting that enables 3D (something like zBufferEnabled=true) that needs to be explicitly set for iOS 6 in gpu mode?
UPD: Ok, I'm pretty sure it's a bug, I reported it to Adobe - Bug 3330901 -
Problem with .swf playback
Hello,
I have a problem with .swf animation playback in captivate 4. I created the .swf in flash with as3 on one frame. The animation is contained in a movieclip. I exported from flash and made sure the framerates between captivate and flash work. I import the animation to a slide and notice that the duration of the animation is .01 (could this be a red flag?). When previewing my captivate file the animation does not play it shows up static. I have my captivate file set up with continue buttons but I tried taking the button off the animation slide and it still shows up with the static what would be animation. Has anyone else encountered this? I'm really at a loss as to whats going on
For bonus points: I'm still getting a transition that fades to white briefly even after I put no transition. Is their a way to just have an abrubt transition without the fade?
Cheers
-MattAlright now it makes more "sense".
Your SWF problem is caused by a bug in Captivate. I have encountered this many many times. Basically if you import a Flash animation and you have more than 1 slide in Captivate it will play to the end before you get to the slide with the animation. It's a really annoying bug that also occurs if you insert an SWF created in Captivate into a master Captivate project.
There are a couple of solutions to your problem.
1. Try and Externalize your animations when you publish your Captivate project. This can sometimes remove the problem. You can edit the settings in Preferences - Publish Settings.
2. Create a loader in Flash that will pull in your animation SWF. Basically you just need to do a loadMovie shell in Flash and then have that pull in your animation SWF. I use this all the time for AS2 projects, but I guess that it will work just the same for AS3 projects.
As for your fade in / fade out issue. Did you by any chance set a transition effect on your slides? Check the Slide Properties for a transition effect. If that's not it - is your fade in issue only occuring on the first slide? The "master" setting for a Captivate project has a default to fade in on the first slide. You can change that in Preferences - Project - Start and End.
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets. -
Problem with DVR playback on second STB
We have one STB with DVR, and one plain STB. I often record long programs on the DVR and play them back on the second STB. This hasn't been a problem until one of the system updates a few weeks.
Now, playback stops at exactly 2 hours. If I'm trying to play back a longer program, it stops after 2 hours even if the recording is 2:15 or 2:30 or whatever. It's as though I hit the STOP button -- it just stops playing the recorded program and goes to the blue "view recordings" screen.
And I can't just start up again where the program stopped (at the 2 hour mark) -- there's no "resume play" option. The only option is "play" which of course starts over again at the beginning.
I have no problem with playback of programs shorter than 2 hours.
Neither the DVR nor the second STB shut down when the playback stops at 2 hours. If I play back the long programs on the DVR/STB (on the first TV), the entire program will play, no matter how long it is.
Any idea why this has started happening, and how to fix it?Just an update, I think I may have found the problem, but not a permanent fix. I failed to mention I am running a raid striped array. I tried inserting a 2gb usb drive with my video file into the computer. I then went into itunes and changed the itunes directory to the USB drive. I then proceeded to have Itunes convert the file for ipod, synced the file and then it played properly on the ipod. I do not have a external drive large enough to hold all my videos. It is either a problem with the raid array or the fact the files are on the boot drive. Anyone have a fix so I can you my computers hard drives??????????
Gary
P.S. Support still has not emailed me the article they were suppose to send. I have 7 days to return the ipod and if I do not get a answer back by then I guess I will return it for something else. -
Problem with ALV grid in edit mode
Hello, gurus!
I have a problem with ALV-grid. Sometimes when I call F4 help for a cell, data is inserted in a different cell. And when I call check_changed_data method, my internal table (passed to ALV-control in set_table_for_first_display) does not updates properly. In what can be a problem?
Thanks,
MikhailHi Prabhu,
MODULE pbo_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
title_of_report = text-010.
SET TITLEBAR '0100' WITH title_of_report.
DATA: g_event_receiver TYPE REF TO lcl_event_handler.
IF z_custom_container IS INITIAL .
CREATE OBJECT z_custom_container
EXPORTING
container_name = 'ALV_ZAC'.
CREATE OBJECT alv_grid
EXPORTING
i_parent = z_custom_container.
g_repid = sy-repid.
gs_variant-report = g_repid.
x_save = 'A'.
PERFORM check_alv_grid_fields.
ps_layout-cwidth_opt = 'X'.
ps_layout-edit = 'X'.
CALL METHOD alv_grid->set_ready_for_input
EXPORTING
i_ready_for_input = '1'.
* CALL METHOD alv_grid->register_edit_event
* EXPORTING
* i_event_id = cl_gui_alv_grid=>mc_evt_enter.
APPEND s_list_rec to it_list_rec.
CALL METHOD alv_grid->set_table_for_first_display
EXPORTING
is_layout = ps_layout
is_variant = gs_variant
i_save = x_save
CHANGING
it_fieldcatalog = pt_fieldcat
it_outtab = it_list_rec[].
CALL METHOD alv_grid->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
CALL METHOD alv_grid->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDIF.
FORM check_alv_grid_fields .
DATA: ls_fcat LIKE LINE OF pt_fieldcat.
REFRESH pt_fieldcat .
CLEAR: ps_layout, ls_fcat.
ls_fcat-fieldname = 'VBELN'.
ls_fcat-ref_field = 'VBELN'. ls_fcat-ref_table = 'LIPS'. " .
ls_fcat-outputlen = 9.
* ls_fcat-datatype = 'CHAR'.
* ls_fcat-inttype = 'C'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ls_fcat-fieldname = 'ERDAT'.
ls_fcat-ref_field = 'ERDAT'. ls_fcat-ref_table = 'LIPS'.
ls_fcat-outputlen = 9.
* ls_fcat-f4availabl = 'X' .
* ls_fcat-datatype = 'DATS'.
* ls_fcat-inttype = 'D'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ENDFORM. " check_alv_grid_fields
FORM save_p .
CLEAR l_valid.
CALL METHOD alv_grid->check_changed_data
IMPORTING
e_valid = l_valid.
IF l_valid IS INITIAL.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = text-i01
txt1 = text-i02
txt2 = text-i03
txt3 = text-i04.
ELSE.
i_dat_reg = zrumm_prr-cdprr.
CLEAR is_temp_otc.
freshit i_prrpus_fax.
freshit i_list2_ot.
LOOP AT it_list_rec INTO s_list_rec.
MOVE-CORRESPONDING s_list_rec TO i_list2_ot.
i_list2_ot-fgrup = 'RECE'.
i_list2_ot-prrnu = i_num_prr.
APPEND i_list2_ot.
MOVE-CORRESPONDING s_list_rec TO i_prrpus_fax.
APPEND i_prrpus_fax.
ENDLOOP.
ENDIF.
Edited by: Mikhail Sarychev on Mar 16, 2011 6:41 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM
Maybe you are looking for
-
How to change the text of a tabstrip?
Hallo Experts, There are 3 tabstrips in Screen Painter with the name tabstrip1, tabstrip2 and tabstrip3. The default text ist: customer_fields1, customer fields2, customer fields3. Now I want to change the text of tabstrips in real time. E.g. text of
-
Invoice corrections Sales order- New Pricing is not carried out
Hi All, waiting for some one to guide me in a right way... I have Scenario where creating a invoice correction request with reference to Invoice document.New pricing is not carried in debit line item even though i changed the pricing date as current
-
How to fix email crash in iOS 7
Since my ios7upgrade me iPad and iPhone email crashes frequently usually immediately after launch. Seems to be aggrieved acted by selecting email messages to delete. Google search didn't seem to indicate to me many others were having this problem I'd
-
When I try to watch movies off of Safari, the quicktime window appears, but it is soooo small... where do i go to make that bigger?
-
Why the CLOB couldn't be inserted completely?
envirentment: vc++ 6.0 database: oracle8i 8.1.7 ole provider: OraOLEDB.Oracle 8.1.7 I want to insert CLOB into oracle,but after inserted, dbms_lob.getlength(content) return the byte of the CLOB is less than original one,no error was reported in the p