Problem with fonts converted to outlines

In CS5, when I convert a font to an outline.  The stroke and fill is lost and is no longer editable.  Obviously, in this instance, I need to edit both in the resulting outlines, but am unable to do so.  Anyone have any help to offer?

Do you still have the vector paths after creating outline?
If so then create a graphic style(to save all your strokes/fills, then convert to outlines, then apply the graphic style.
You may have these appearance attributes asssigned on the type(on some strange combination of charachter, type, group level), but after it going to outlines Illustrator gets confused and assigns none.
If you have vector paths you could reassign your file & stroke attribute, then graphic style will just back up your hard work.

Similar Messages

  • I have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

    i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

    i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

  • Problem with font size, not showing up as expected.

    I've been wrestling with this for a few weeks now, but surely must be getting closer to having it resolved. It's just a problem with font size on just this one page.
    http://www.kgngroup.net/logos_and_packaging.html
    I want the body text to be 10px, but after two weeks, have played with every conceivable way, altering body font size in CSS and in the document itself. I've viewing it in Safari but others on Windows machines tell me that it is out of whack also.
    My main problem is that I can change the font size to extremes but it still shows up as the same size in the browser (about 12px.) I know changes can be made because I can modify the wording and that does change online. It's just a problem with the font size. Oh, and in the third column, the one to the right, in Dreamweaver, the font looks like it is miniscule, cannot even be read, but in the browser, since the style11 is applied, all three columns look equal size.
    Not sure where to go from here. I just want to get the body font down to 10 pixels.
    TIA,
    Ken

    John Waller wrote:
    I guess this a follow up to your earlier thread
    http://forums.adobe.com/message/3627681
    What would really help you in diagnosing issues such as this is to install the Firebug add-in for Firefox (as suggested in the earlier thread).
    Firebug shows you visually what CSS rules apply to whatever element you click on the screen.
    In this case, you have a confusion of CSS font sizes cascading on top of each other and that's confused again by mixing units for no real reason. .style11 is unnecessarily applied to lots of individual <p> tags. Remove those classes and delete the rule.
    e.g.
    The tiny font in the RHS column is affected first by
    .style8 {
    font-size: 0.5em;
    affecting the <td> then by
    .style11 {font-size: 75%}
    affecting the <p> tag.
    End result = tiny text (approx 2px).
    In these cases of mass confusion, my approach is to strip out all font sizing from the CSS and start over.
    Avoid %. Use px.
    Apply font sizing rules logically starting from the <body> tag downwards.
    That'll give you a solid baseline without weird effects.
    Ah, I find your answer worth repeating.
    Very cool that you have diagnosed so well and spelled it out here.
    I will get the Firefox add-on you mention, plus, print out this response and follow it like a recipe.
    It makes perfect sense and you have saved me from the 'clutter' of being wound up in too many directions with this because I could not make all of the connections that you have done here. I appreciate your help very much.
    Thank You,
    Ken

  • Workflow 2.6.3.5  - Problems with font in OA

    I have some problems with fonts in Oracle Workflow: i created a process in wf builder and a package that start the process..in the package i put a text body for the notifications with 'b' and '/b' but when i read the notification in workflow manager i cant see the bold font!! Anyone can help me?? I suppose that this problem is linked with HTML code that has to be set in some preferences menu, but i cant find it..but it may be another reason!
    Another problem that i have is that i cant disable the history window in the notification (even adding to the message the attribute #HISTORY)..
    THX for your help
    Jac ;)
    Message was edited by:
    JaCoRoBo

    1. I am unable to understand the first problem. Please note that if you want to display HTML formatted content, you will have to use one of the following options.
    PLSQL Documents - 32K size limit
    PLSQLCLOB Documents - CLOB
    Embedded Fwk Regions - Only in Oracle Applications
    If you are specifying HTML content within Item Attributes that you want to be eventually displayed in the notification the HTML tags could be decoded and displayed as is without formatting.
    2. There is no documented way to disable the Default Action History within the notification body. You may define the Document type message attribute #HISTORY, assign a PLSQL Document API to it and return null from the Document code. This should hide the action history.
    Hope this helps.
    Vijay

  • What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

    What is the problem with fonts changing to myriad pro? Is this problem ever going to be resolved? Its driving me mad!

    Browser Dog, Amy,
    The default font remains Myriad Pro until you change it, either in the RGB/CMYK Startup files or in the preferences, options depending on versions.
    Concerning missing font names, I believe this may solve it:
    Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
    It was first presented in this post #15 by TheUlser:

  • Problem with fonts display in safari and mail ???

    hello !
    sometimes i have problems with fonts display
    safari use a mathematics font instead of my preferences fonts
    i have to copy-paste in a text-editor to see the right font !!!
    i have the same problems sometimes in mail
    is anybody have infos about that problem ?
    thanks !
    p.s. mail version 1.3.11 - safari version 1.3.1

    OS X cocoa apps like Safari and Mail don't like non-Unicode fonts using common names that replace Latin with symbols or other scripts. Helvetica Fractions and Times Phonetic are common culprits. You need to remove such fonts to solve the problem.

  • Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

    Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

    giadad,
    It sounds as this issue:
    Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
    It was first presented in this post #15 by TheUlser:
    https://forums.adobe.com/message/6854594#6854594
    It has been described on this Adobe page:
    http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/

  • Help me, I have a problem with font when export report to PDF?

    Hi everyone! Help me
    I have a problem with font when export report to PDF
    My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
    when desige template no problem, error only happen when view report by PDF.
    Edited by: user10236405 on Oct 15, 2008 11:23 PM

    give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

  • CS5.1 Missing fonts - converted to outline

    Hello, I have PC with Adobe Master Suite CS5.5 installed.
    Problem:
    I had to open eps file, where is font Obelix Far East, which I don't have and needs to be replaced to Myriard.
    When I open this eps, all Obelix's words are automaticaly converted to outlines.
    original:
    CS5.5 - immedatelly after opening:
    Is any way to prevent convert words? I can see it first time, because before CS5.5 I used only CS4 and there was no problem with this. I simply replaced missing font for the known one and that's it...
    Thank you very much for any idea.
    Regards...Ilja

    like maybe I hit some odd key command that made it all go away but I've been unable to get anywhere.
    Yes that is the case, you accidentally must have hit the cmd + T key and now you have set Bridge to show only thumbnails.
    Under the menu view you will see a checkmark in front of the option: "show thumbnail only" . Click on it again to deselect or hit again cmd + T (on a Mac) and you get back to the normal situation

  • Problem with fonts when opening a pdf in Illustrator

    Hi all! I'm working on a pdf. I do NOT have the original. So I've found it's easier to open the pages in Illustrator, make edits, and resave as a pdf. The problem is that Illustrator is converting some text to outlines. It is saying I don't have the font, but I do. In fact, on the same page I'll have 4 lines... and some will be converted to outlines and some won't... and they are all the same font. Is there a way to tell Illustrator to NOT convert the font to outlines? I don't mind if it uses a substitute font... it's easy to go in and change the font to the right font. But I don't want the text converted to outlines. Thanks.
    Julie
    PS I'm using CS 4 on a Mac.

    Thanks, Scott. But I'm not sure what you mean by "pretty standard." Are you saying this is, in fact, default behavior in AI 14?
    I'm still at AI 12 (CS2), and "standard" behavior (when the font is not available) is for Illustrator to do a font substitution, not automatically convert the type to outlines.
    Is this, perhaps, what the new 'Missing Glyph Protection' does in AI 14 (as Myle suggested in post #1)?
    If, in fact, this is the new default behavior, I would hope that Illustrator provides a warning (and an option to not proceed) given the highly destructive nature of converting type to outlines.

  • Issue installing a TTF 'Serious Problem' with Font Table Directory

    I was given a font by a client to use for a project. I have installed TONS of fonts easily and NEVER a problem. But this font ( ASIA-NO. TTF ) will not install via Font Book. The font validator says all items of the font are acceptable except for the 'Font Table Directory' - in which is says there are 'Serious Problems with the Font Table Directory and says Do Not install font. HELP! I need this font for the project. ANY IDEAS Welcome!

    Hi there, I wonder if it's a Windows® TTF & needs converting...
    http://www.versiontracker.com/dyn/moreinfo/macos/4632

  • Word 2011 for Mac - problems with font color

    After reading others' problems with Word, I feel lucky I've got only this small one: I can't change the color of fonts! When I click the arrow next to the Colored A, I get a blank menu! I've found a few others with this problem on the web, but no clear, simple solutions. Anybody got one? I'd really appreciate it!

    Louise,
    I'd recommend visiting the Office for Mac Product Forums for MS Office questions.

  • Problem with fonts when reading PDFs

    Hi,
    I have just updated my PC to Windows 7 and Adobe Reader 9.2.
    When I open PDF files I've previously viewed OK they now are shown with Adobe fonts.
    Some always, some may be OK the first time but not subsequently and some don't have the problem.
    I assume the ones that are OK were produced with a different PDF creator package?
    What's changed in Adobe 9/Windows 7?
    Thanks

    Thanks for taking the time to answer Claudio.
    I understand what you are saying but these documents are ones I've been accessing every week for the last year and have only just started getting the problem.
    I also notice that the ones that I don't have a problem with were created with a different program, earlier than the others as the guy who produces them had changed the program he uses.
    If I haven't already said, I have successfully opened one of the problem ones and it was OK, closed it and re-opened it and I get the Abobe font instead of the Times New Roman.

  • Illustrator - problem with font Windsor

    Hello,
    i work on my old PC and now i have brand new PC with clean install Win 7, 64 bit + Adobe Suite CS6 + updates. On old PC i open my graphic with font Windsor with no problem. On new PC in Illustrator i open graphic and program give me info "missing font Windsor-regular". I have same font as my coworker and from same source. But coworker have no problem with missing font Windsor. I have Windsor in Fonts in Windows. My solution i snow: i open graphic document/ i read info about missing font/ Choose Text – Find font – choose font from "system" and replace. Now font is OK and i save this graphic. I reopen this graphic and info about missing font is gone. After this open my coworker same graphic and he has same info about missing font Windsor-regular. So he replace Text from system and save and its OK for him after reopen. I open this graphic again and i have info about missing font . Its so annoying.
    i try font delete and try give font from one source to me and my coworker. Problem still persist. I try at home open graphic with same font from same source and all work fine = font is OK and info about missing font is gone. Maybe the problem is only my PC, but why have my coworker info about missing font after i save the document? maybe i save some bug with font? Pleas give me some clue. Thanks.

    So i today uninstal Windsor font from my PC and delete "Windsor" from registr via regedit + restart PC. After this i install same font from co-worker. The graphic with font Windsor still give me info about missing font. So we check versions of fonts (thanks Rama) and we have different versions! How is this possible? Same source and same font, but different versions. I dont get it, really this is magic :-)
    I have:
    Windsor
    Postscript name: Windsor
    Windows font name: Windsor
    Language: Latin
    Type font: True type
    Type Tsume: none
    co-worker have:
    Windsor-regular
    Postscript name: Windsor-regular
    Windows font name: Windsor
    Language: Latin
    Type font: True type
    Type Tsume: none
    And i go To Windows and with coworker we check in Fonts in Windows Properties by this Windsor Font. We have almost same information, but i have name "WINDSOR_7" and co-worker "WINDSOR_0" and i have change date today 2. July 2014 and co-worker has 8. March 1997. I try rename my "Windsor_7" to Windsor_0, but this give me info that i have Windsor_0 in my PC and this must be Windsor_0 (2). But i have visible in Fonts only 1 Windsor!
    In Total Commander i see:
    c:\Windows\Fonts\WINDS.TTF
    c:\Windows\Fonts\WINDSOR.fon
    c:\Windows\Fonts\WINDSOR.TTF
    c:\Windows\Fonts\WINDSOR_.TTF
    c:\Windows\Fonts\WINDSOR_0.TTF
    c:\Windows\Fonts\WINDSOR_1.TTF
    c:\Windows\Fonts\WINDSOR_2.TTF
    c:\Windows\Fonts\WINDSOR_3.TTF
    c:\Windows\Fonts\WINDSOR_4.TTF
    c:\Windows\Fonts\WINDSOR_5.TTF
    c:\Windows\Fonts\WINDSOR_6.TTF
    c:\Windows\Fonts\WINDSOR_7.TTF
    But i cant delete this fonts. I try, but Total commander give me info: "Remove the write-protection". How? I try Properties by this files in Total Commander, but cant activate. Is this some solution?
    15:31 = now was on my PC IT specialist and he cant delete fonts (as admin) too. Its really some weird problem.

  • Problem with unit converter widget

    I am having a weird problem with my unit converter widget on 10.4.9.
    I re-installed my system, and now when I go to open the unit converter widget, I can no longer see the British pound currency, there are all these othere European currencies.
    Is there anyway to get the British pound currency back, do I need to re-install the widget, and how do I do that.

    Then I'd try removing & reinstalling it...
    http://docs.info.apple.com/article.html?artnum=301629
    If it's one that came with OSX, you may have to get pacifist to extract it from your install Disk.

Maybe you are looking for