Problem with fonts while printing PDF in MAC OS

I have PDF file. It contains Cyrillic fonts and looks OK on the screen in MAC OS
But during printing all labels are presented wrongly and not readable. I have tryied two options:
1) Opened PDF in built-in MAC OS Viewer
2) Downloaded and installed Acrobat Reader and printed from it
Printing results by both methods are different, but in both cases text is not readable.
Attaching screenshots (part of laptop screen) from laptop screen and printing results (scanned paper sheets)
Printer: Cannon MP560 (with standard driver version 10.84.2.0)

Max,
Try Troubleshoot fonts | Mac OS X and go through each step. You can probably skip step 1 as it's already displaying correctly. Good luck.

Similar Messages

Problems with stopped HP Print Jobs on Mac OS 10.5.

I have several Mac Stations with different Mac OS X versions (Mac OS X 10.5-10.7) and bought 2 HP Laser Printers:
- HP LaserJet Pro 400 M401dw
- HP LaserJet Pro 200 M276nw
After installing the HP Driver SW on all Mac Stations I changed then on the Printers the dynamic IP address to static ones. The printing didnt work anymore from the Mac Stations. I re-installed all Driver SW on every Mac Station. Then Printing worked on every Mac, except only on the Mac OS X 10.5. Station the Print Jobs were always stopped after any Print attempt.
This appeared on the Mac OS X 10.5. Machine in the Printer Spooler Job Message Window and within the error_log File content:
- can't create PictWPSDoc from `/private/var/spool/cups/xxx'.ERROR during execution of pictwpstops. Error number -9783
As it seems like problems existed with file permissions I ran a complete Disk Utility File Permission Repair. Then another reinstall of the HP Driver Packages. - Still the same failures with stopping Print Jobs.
Then I read the README file of the Installation Package. And the quite simple solution was:
DE-INSTALL the HP Driver SW FIRST (with the HP Deinstallator), BEFORE RE-INSTALLING the HP Driver SW again.
So I did this, then no Print Jobs were stopped anymore and both Printer are happily printing.
The conclusion is, I guess, Mac 10.6..10.7 does not have problem with multiple re-installation of the HP driver SW. Only the Mac OS 10.5. did NOT work anymore after another reinstall of the Driver SW Package, and without de-installing it properly. The bottom line is to de-install the driver SW (and maybe disk repair) properly BEFORE another insallation wants to be done. This however solved my printing problems on the Mac OS X 10.5. machine.

Hi,
Please follow the link below :
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Problem with fonts when reading PDFs

Hi,
I have just updated my PC to Windows 7 and Adobe Reader 9.2.
When I open PDF files I've previously viewed OK they now are shown with Adobe fonts.
Some always, some may be OK the first time but not subsequently and some don't have the problem.
I assume the ones that are OK were produced with a different PDF creator package?
What's changed in Adobe 9/Windows 7?
Thanks

Thanks for taking the time to answer Claudio.
I understand what you are saying but these documents are ones I've been accessing every week for the last year and have only just started getting the problem.
I also notice that the ones that I don't have a problem with were created with a different program, earlier than the others as the guy who produces them had changed the program he uses.
If I haven't already said, I have successfully opened one of the problem ones and it was OK, closed it and re-opened it and I get the Abobe font instead of the Times New Roman.

HP Laserjet 4250 - While Printing PDFs with Watermark, Prints images as scrambled

Hi,
I am using HP Laserjet 4250 printer. While Printing PDFs with Watermark, the printer prints images as scrambled. It prints the part of the image as scrambled which is overlapped by the Watermark. The other part of the image is printed fine. When seen on the screen, it shows up the image with the watermark properly. Could you please suggest how to arrive at a solution for this problem. Thanks in advance.

Hi @Sebastian43
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP LaserJet 6L is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet 6Lse Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

Problem with countinuous paper printing in dot matrix printer

Hi All,
I have problem with dot matrix printer (Devise Type EPESCP) while printing continuos printing. If i am printing 2 or more than that prints at a time, 2nd page is printing 5 lines up.
I have developed one smartform for this and i have used A4 size page format.
I have tried to change the Printer initialization code to 86 lines for DINA4. Still no change in continuous printing.
     Printer initialization
     Reset after exit
     Cover page
     First Page
     Start of even page
     Start of odd page
     Start of page
     End of first page
     End of even page
     End of odd page
     End of page
     Start of line on an even page
     Start of line on an odd page
     Start of line
     End of line on an even page
     End of line on odd page
     End of line
Printer initialization
# reset
\e\0x40
# select character table 3 -> PC 437 character set
\e\0x74\0x03
# set line spacing 6 LPI
\e\0x32
# set page length 86 lines
\e\0x43\0x46
# cancel bottom margin
\e\0x4F
# set left margin to 0
\e\0x6C\0x00
# select LQ quality
\e\0x78\0x01
# select non-proportional spacing
\e\0x70\0x00
Can any one help me.
Thanks,
Vishnu

Hi Vishnu,
Above you have the following commands:
set line spacing 6 LPI
\e\0x32
set page length 86 lines
\e\0x43\0x46
46 HEX = 70
So the above settings mean 70 lines at 6 LPI = 11.66 inches.
So is the paper length 11.66 inches? If not, you should adjust the settings accordingly.
Regards,
Aidan

Problem with Photoshop Elements Printing

I have been using Photoshop Elements for a couple of years now and know it pretty well. Today while attempting to print, a strange problem came up: After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image. How do I disable this function?

Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have. Am I looking in the wrong place?
Date: Mon, 3 Sep 2012 11:14:57 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Photoshop Elements Printing
    Re: Problem with Photoshop Elements Printing
    created by 99jon in Photoshop Elements - View the full discussion
Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Cannot print due to a problem with the current printer

Cannot print (anymore) due to a problem with the current printer is the message I get every time I try to print something out. I tried to reinstall the printer's software, I changed the cables, but nothing happened. It seems to be something related to the printer setup utility. Any big idea on how to solve this? I was printing without problems until this afternoon. I have a HP Laserjet 1022 and sometimes I use Adobe Acrobat Writer. None is currently working.
Thanks for any help.
Power Book G4 Mac OS X (10.3.9)

I just had the opererational system (10.3.9) reinstalled . Back to normality again.

Problem with font size, not showing up as expected.

I've been wrestling with this for a few weeks now, but surely must be getting closer to having it resolved. It's just a problem with font size on just this one page.
http://www.kgngroup.net/logos_and_packaging.html
I want the body text to be 10px, but after two weeks, have played with every conceivable way, altering body font size in CSS and in the document itself. I've viewing it in Safari but others on Windows machines tell me that it is out of whack also.
My main problem is that I can change the font size to extremes but it still shows up as the same size in the browser (about 12px.) I know changes can be made because I can modify the wording and that does change online. It's just a problem with the font size. Oh, and in the third column, the one to the right, in Dreamweaver, the font looks like it is miniscule, cannot even be read, but in the browser, since the style11 is applied, all three columns look equal size.
Not sure where to go from here. I just want to get the body font down to 10 pixels.
TIA,
Ken

John Waller wrote:
I guess this a follow up to your earlier thread
http://forums.adobe.com/message/3627681
What would really help you in diagnosing issues such as this is to install the Firebug add-in for Firefox (as suggested in the earlier thread).
Firebug shows you visually what CSS rules apply to whatever element you click on the screen.
In this case, you have a confusion of CSS font sizes cascading on top of each other and that's confused again by mixing units for no real reason. .style11 is unnecessarily applied to lots of individual <p> tags. Remove those classes and delete the rule.
e.g.
The tiny font in the RHS column is affected first by
.style8 {
font-size: 0.5em;
affecting the <td> then by
.style11 {font-size: 75%}
affecting the <p> tag.
End result = tiny text (approx 2px).
In these cases of mass confusion, my approach is to strip out all font sizing from the CSS and start over.
Avoid %. Use px.
Apply font sizing rules logically starting from the <body> tag downwards.
That'll give you a solid baseline without weird effects.
Ah, I find your answer worth repeating.
Very cool that you have diagnosed so well and spelled it out here.
I will get the Firefox add-on you mention, plus, print out this response and follow it like a recipe.
It makes perfect sense and you have saved me from the 'clutter' of being wound up in too many directions with this because I could not make all of the connections that you have done here. I appreciate your help very much.
Thank You,
Ken

Problem with the MVMapView.print(printMapDiv,) function.

Hello,
I have a problem with the MVMapView.print(printMapDiv,) function.
My FOIs are displayed correct on the screen but on the printed letter
the stroke(border) color and the labels of a circle are not displayed.
the fois have a custom style:
var xmlDef = '<svg width="1in" height="1in">'+
'<g class="marker" '+
'style="width:40;height:40;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
'<circle r="20"/>'+
'</g>'+
'</svg>';
markerStyle = new MVXMLStyle("my_vector_icon_" + i + '_' + j, xmlDef)
and are created like this:
v_result = new MVFOI(p_geofeature.foiId, p_geofeature.foiGeomertyObject, markerStyle, null, 30, 30);
v_result.setHTMLElement('1',0,0);
Browser: I can see the map with a green circle, a red border and '1' as a label on
top of the Circle.
Printed Letter: I see the map with the green circle but no red border Color and no label.
The implmentation of the printing function uses the same techique like the "Oracle Maps Tutorial"
It is a javascript function called through a href link:
function mapPrint()
var a=document.getElementById("printmap");
global_gdi.mapviewer.mapview.print(a);
Version is Ver11_1_1_5_B110527
Does anbody know how to print the map properly including the contents of the
MVFOI class set trough setHTMLElement function?
Greetings
Andre

Thanks for your reply but it is not working and i can prove that.
I have a small example based on the mapviewer print tutorial. To run it you need a
mapviewer installation and copy the text into a html file. In the browser you can see
a green point with a red border and red label text on a map.
If you use the print button everything except the label text will be printed.
I think this is a mapviewer css-api bug.
<html>
<head>
<META http-equiv="Content-Type" content="text/html; charset=UTF-8">
<style type="text/css">
@media screen
.noscreen {display: none;}
@media print
.noprint{display: none;}
</style>
<script language="Javascript" src="/mapviewer/fsmc/jslib/oraclemaps.js"></script>
<script language=javascript>
var mapview;
var baseURL = "http://"+document.location.host+"/mapviewer";
function showMap()
mapview = new MVMapView(document.getElementById("map"), baseURL);
mapview.addMapTileLayer(new MVMapTileLayer("mvdemo.demo_map"));
mapview.setCenter(MVSdoGeometry.createPoint(-122.45, 37.6706,8307));
mapview.setZoomLevel(4);
mapview.display();
//adds custom foi with label
var xmlDef = '<svg width="1in" height="1in">'+
'<g class="marker" '+
'style="width:40;height:40;font-family:sans-serif;font-size:20pt;stroke:0xff0000;fill:0x00ff00;stroke-width:1.5">'+
'<circle r="20"/>'+
'</g>'+
'</svg>';
var markerStyle = new MVXMLStyle("my_vector_icon_", xmlDef);
mpoint = MVSdoGeometry.createPoint(-122.30, 37.73,8307);
var v_result = new MVFOI("11", mpoint, markerStyle, null, 60, 60);
v_result.setHTMLElement('test label',0,0);
mapview.addFOI(v_result);
function mapPrint()
var a=document.getElementById("printmap");
mapview.print(a);
</script>
</head>
<body onload=javascript:showMap()>
<div id="map" style="position:absolute;top:50px; left:10px; width:600px; height:450px;border:0px"></div>
<div id="printmap" class="noscreen"></div>
<p>Please click <a href="javascript:mapPrint()">here</a> to print map</p>
</body>
</html>
Edited by: user12005064 on 27.02.2012 02:37

Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing works .

Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing works .

Yea i tried in disk utility and its got faiiled and the partitation has deleted and when i tried to replug the usb msg show up by saying usb not compaitnle. With this mac and take me to disk utility and thanks for replying

Facing problem with logo in the PDF attachment when sending mail...

hi friends,
i'm facing problem with logo in the PDF attachment to the mail.
my requirement:
1. enter spool number and mail id in the selection screen.
process:
1. now the program will fetch the spool data and converts it to PDF.
2. but when i'm trying to send mail with this PDF as attachment.
when i open the PDF file from the mail, logo is not coming properly (looks disturbed).
can anyone help me how to resolve this issue...
thanks in advance, murashali.

hi dinakar, thanks for your mail...
logo looks good in spool/script/smartform.
even it look good when i download this spool to pdf and to the presentation server as pdf file.
i'm using CONVERT_OTFSPOOLJOB_2_PDF.
when i used CONVERT_ABAPSPOOLJOB_2_PDF, is gives a msg - 'spool number not found'.
here i'm using folloing code to pass pdf to the function module: SO_NEW_DOCUMENT_ATT_SEND_API1.
code:
Transfer the 132-long strings to 255-long strings
lt_mtab_pdf[] = pdf[].
LOOP AT lt_mtab_pdf INTO lwa_mtab_pdf.
    TRANSLATE lwa_mtab_pdf USING ' ~'.
    CONCATENATE lv_gd_buffer lwa_mtab_pdf INTO lv_gd_buffer.
    CLEAR lwa_mtab_pdf.
ENDLOOP.
TRANSLATE lv_gd_buffer USING '~ '.
DO.
    lwa_mess_att = lv_gd_buffer.
    APPEND lwa_mess_att TO lt_mess_att.
    CLEAR lwa_mess_att.
    SHIFT lv_gd_buffer LEFT BY 255 PLACES.
    IF lv_gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
NOTE: problem i believe is with ''. i'm getting this tilt symbol () in my pdf internal table. here in the above code the line   TRANSLATE lv_gd_buffer USING '~ ' is changing the existing tilt to space. so my logo is getting disturbed.
even i tried with REPLACE this tilt with other char, but it doent work.
can you give any idea...

I have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!

Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem with fonts while printing PDF in MAC OS

Similar Messages

Maybe you are looking for