Problem with formatted search in grid

Hi all,
I have a Grid with 3 columns in my user defind form. In that Grid,I used one one formatted search on column 2 based on the value of column 1.
I mean when i was press 'SHFT+F2' on second column, it will execute the query based on value of what we entered in the first column of the grid. How can i do this?? How can i fetch the value of first column in the formatted search??. Please help me.
Thanx in Advance
Oram.

Hi
write a query like this and assign formatted search on column2
SELECT ITEMNAME FROM OITM T0 WHERE T0.ITEMCODE = $[/$GRIDUID.COL1 UID.ROWNUM])
regards
Vishnu

Similar Messages

Problem with Formatted Search-Urgent

Hi All, I have a problem as follows:
I am trying to set up a formatted search in the Batches Setup window of GRPO document. I want to pickup the "Total Created" figure from Rows From Document grid (i.e. the upper grid) in the form. I want to add 100 to it and then to display the result in the "Batch Attribute1" Field in the lower grid i.e. Created Batches Grid.
Please someone give me the tested query for the purpose..
Thanks In Advance
Amol Mangalkar

Try the next FS:
SELECT $[$35.38.Number]+100

Problem With Formatted Search.

Hi to all,
I have linked a formatted search to a UDF that lies at row level in AP Invoice. This field is used to display the Sales Order Price. The requirement is that from SO we create a purchase order and subsequently create a goods receipt and AP invoice.. Now in invoice it is showin perfectly fine whether it is copied from goods receipt or purchase order.. But in the purchase order and goods receipt screen this query will not work. And the same query used in AP invoice is being linked to these documents. Is there any work around for this?? Is it possible to run queries based on the form numbers?? If so ho do i pull the form number in the formatted search query??
Please Help!!!!
Regards
Aris

I recommend creating separate queries for each document.
ie
1 formatted search to lookup price on sales order from AP Invoice
1 formatted search to lookup price on sales order from GRPO
1 formatted search to lookup price on sales order from PO
then change the lookup to pull fields from the document that you are using as a reference.
when you are building the formatted searhes start by returning the values that are you are using as a reference. That way you are sure that you are pulling the correct information.
Then layer in the lookup to the sales order.
If you get stuck I recommend that you copy and paste the formatted search in SQL Server management studio and replace the variables refereces with real values.
In my experience troubleshooting queries is more effective when using SQL Server management studio. (the error reporting is better).

Problem with formatted search on UDO Form

Hi,
I've created an UDO and in the lines I have the fields ItemCode and ItemName. In the ItemName field I have a formatted search configured the next way:
 -Search by Saved Query
 -QueryName
 -Auto refresh when existing altered column
 -ItemCode
 -Refresh regularly
This formatted search works fine when I do <shift> + F2 in the field. But when I change the field ItemCode and get out of the field it doesn't execute the formatted search.
Any ideas?
Thanks in advance, regards
Vanesa

Hi Vanessa,
Firstly (and I'm not giving lessons on sucking eggs) does this work when run as a query with the $ field replaced with a litteral value that you know exists in the table you're searching (surrounded by single quotes)?
The reason I say this is that I have had a few where as opposed to giving an error I've been hitting shift+f2 with absolutely NO feedback via error messages.
Which form is this within? How have you used the variable element in the query?
Is it possible for you to show the query? Along with details on which form you're using it in?
Hopefully be able to help with more info,
Julian

Formatted search on grids

Formatted search on grids does not work.
I defined formatted search query
SELECT $[$MYGRID.QTY.0]
and link it to field DESCRIPTION on the grid.
I was hoping to get QTY value copied to DESCRIPTION when press SHIFT-F2. but nothing happened.
Does Formatted Search working on grids? is any work around?
Thanks a lot
Fred

Fred,
Please have a look at this SAP Note as it pertains to issues with Formatted Searches on grids. If this issue pertains to you, you will need to download patch level 18 from SAP Business One 2005A SP01 from the SAP PartnerEdge Portal.
SAP Note# 1005565
HTH,
Eddy

How can i get totals in columns with formated searches

How can i do this with SDK if it isn´t posible since formated searches

This is not possible with formated searches.
With SDK, depends on if it is Matrix or Grid, on if it is a system form/your own form. But basically, loop throw the form or datasource, and do the sumatory.
Regards,
Ibai Peñ

Application Express 3.1 + BI-Publisher + problem with formating numbers

Hello together!
I use the Oracle BI Publisher Template Builder for Word (10.1.3.4) to generate RTF-Templates. I upload these templates in Oracle Apex (Advanced support-->BI-Publisher/OC4J as print service).
It works well, but I have a problem with formating numbers.
In Template Builder I define following number formats, for example: #.##0 for numbers like 1.454.234 and #.##0,00 for numbers like 54,80
In Template-Builder Preview it looks well.
But whatever I do, in use with Oracle Apex dots and comma are allready interchances in the printout.
That means,
1.454.234 become 1,454,234 in PDF-Report
54,80 become 54.80 in PDF-Report
Other than that, the layout is exactly the same like in Template Builder defined.
What's wrong?
Do I have to change any country parameter?
Juliane

I also had the same problem. I tried with normal formating of 99g99g999d99 instead of ##,##,##0.00 and it has resulted correct way.

Problem with ALV search help Dictionary Search Help

Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
Miko

Hello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko

Proxy problem with Yahoo search returned links

We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3 that works well. A replacement that I have had up but not currently using much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with Yahoo search results. If I point a workstation to the older NW6 BM it works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM then it will work fine in Bing and Google but in Yahoo it will return the results but when you click on any link there I get this message:
Yahoo!
Yahoo! - Help
The requested URL was not found on this server.
Please check the URL for proper spelling and capitalization. If you're having trouble locating a destination on Yahoo!, try visiting the Yahoo! home page or look through a list of Yahoo!'s online services. Also, you may find what you're looking for if you try searching below.
Any ideas? I have no access rules enforced. Anything that might be of help would be greatly appreciated.....Thank you!

On 03/10/2014 09:56 PM, jpeteet wrote:
>
> Mysterious;2310138 Wrote:
>> On 03/07/2014 09:06 PM, jpeteet wrote:
>>>
>>> We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3
>> that
>>> works well. A replacement that I have had up but not currently using
>>> much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with
>>> Yahoo search results. If I point a workstation to the older NW6 BM it
>>> works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM
>> then
>>> it will work fine in Bing and Google but in Yahoo it will return the
>>> results but when you click on any link there I get this message:
>>>
>>>
>>> Yahoo!
>>> Yahoo! - Help
>>>
>>>
>>> The requested URL was not found on this server.
>>>
>>> Please check the URL for proper spelling and capitalization. If
>> you're
>>> having trouble locating a destination on Yahoo!, try visiting the
>> Yahoo!
>>> home page or look through a list of Yahoo!'s online services. Also,
>> you
>>> may find what you're looking for if you try searching below.
>>>
>>>
>>> Any ideas? I have no access rules enforced. Anything that might be of
>>> help would be greatly appreciated.....Thank you!
>>>
>>>
>>
>> 1. Verify that you use the same proxy.cfg on both servers and the same
>> settings like persistent connections.
>> 2. Take a lan trace on the 3.7 when hitting the yahoo url and a lan
>> trace on the 3.8 doing the same action and compare the differences.
>
> I am still trying to make sense of the Wireshark output. I can see where
> I get the HTTP/1.0 403 Forbidden. What is happening upon further
> inspection is when I click on a link returned from a yahoo search it
> actually takes me to a link that always starts
> "http://r.search.yahoo.com/.......blah blah blah. But If I go to the
> newly opened tab (in IE) and add 's' to the HTTP address and hit enter
> - the link works. Maybe that will help. This happens whether or not I
> have "enforce access rules" checked.....
>
>
1. Verify that you use the same proxy.cfg on both servers and the same
settings like persistent connections.
2. Compare both traces, the working one and the non working one. See if
the returned link from yahoo is the same on both traces and it is coming
from the same server. You may have another firewall/router up in the
path causing the issue.
3. Before taking the lan traces on the netware server using pktscan.nlm,
unload proxy, load proxy -cc to clear cache. Then take the traces and
see at what point the non working one differs from the working one.
check that info is coming from the same up server

Read item code from Sales Order with formatted search

hi,
i'm tring to read tha values of the item or items of a sales order (before save it) with a formatted search.
i have no problem to read the value of card code or cardname but i can't read the item's value.
i tried with this [code]Select $[RDR1.ItemCode][/code] (i found it on the forum) but it doesn't work.
somebody can help me ?
thank you

Hi, Alessandro!
I think the trouble is that you are trying to assign a FS to the header of the document. You are getting the information of the current row, so you have to bind a formatted search to some column of the "table - part" of the document.
And also you can try:
SELECT $[$38.1]
38 - the value of "Item" (when you point a mouse to the cell, information you want from)
1 - the value of "Column" (the same...)
It will get an info of this cell in a current row.
HTH!

Help with Formatted search involving a UDF

I have a Formatted search which runns the following code:
exec xsp_nssItemLookup $[$38.256.0]
This search is on a udf of the Purchase order screen. (256 is the item details field in the details.
The above query runs fine. What I really want to do is to pass the contents of another UDF to the stored procedure. The USF is called U_NSSItemID. If I change my stored procedure to read:
exec xsp_nssItemLookup $[$38.U_NSSItemID.0] however it does not work. I get blank results every time.
I have also tried exec xsp_nssItemLookup $[POR1.U_NSSItemID.0] which doesn't work either.
I can't figure out what is wrong with my syntax. I don't get any errors, just a blank value.
Thanks
don shields

Suda,
Thanks for answering so quickly. To answer your question the data type is Alphanumber which I just figured out is the save as CHAR() in SQL. My problem turned out to be that I needed to trim the spaces from my parameter. I was getting values like "cover ", and I needted to get "cover". Problem solved now.
Don

Get matrix row data and put it into header field with formatted search ???

Hi All,
I ask your help concerning the following:
On an invoice matrix I want to check all Itemgroup Codes of all items in the rows, if there are some rows' items with ItemGroupcode 101 and some others with anything else, then header field should be Y, otherwise N.
My main problem is: how do I put a matrix row data to a header data with checking all rows in the matrix?
A minor problem is that I can't get the formatted search to work on all rows when the formatted search is assigned to the user field in header.
If I put the formatted search to a row field then the row field is filled with the proper value, but the same query assigned to the user field in header works only on the first row.
What am I doing wrong?
SELECT USEDPROD= CASE T0.ItmsGrpCod WHEN 101 THEN Y ELSE N END FROM .[OITM] T0 WHERE T0.ItemCode = $[$38.1.0]
(SBO 7.6)
Any suggestions are welcome.
Thanks.
Bálint

Dear Adele,
Thanks for the answer. The major one cannot be solved. OK, I'll try to get a workaround.
However I still do not understand why my query does not work in all selected rows, just in the first row, i.e. if I assign the query to a header field and I'm positioned in the first row it's OK, but when I add a new item to the second row or any of the next rows, the header field is not updated at all.
Why is that so? Do you have any idea?
Bálint

Problem with Binary search statement

Hi,
I have problem with reading the internal with Binary search.
I have two internal tables BSAS and BSIS. In BSAS I have 1,200,000 line items and BSIS 500,000 line items. I need to delete the line items if BSIS-BELNR NE BSAS-AUGBL.
I am using the following code :
 LOOP AT gt_bsas .
 READ TABLE gt_bsis WITH KEY bukrs = gt_bsas-bukrs
 belnr = gt_bsas-augbl
 gjahr = gt_bsas-gjahr.
 IF sy-subrc NE 0.
 DELETE gt_bsas.
 CLEAR gt_bsas.
 ELSE.
 endif.
endloop.
By this execution of the loop is taking long time. If I use the binary search it is fast but result is not correct.
Please suggest me, how to resolve this issue.
Thanks,
Sri.

Try this way:
LOOP AT gt_bsas .
SORT GT_BSIS BY BUKRS BELNR GJAHR.
READ TABLE gt_bsis WITH KEY bukrs = gt_bsas-bukrs
belnr = gt_bsas-augbl
gjahr = gt_bsas-gjahr
BINARY SEARCH.
IF sy-subrc eq 0.
****Do Nothing.
ELSE.
DELETE gt_bsas sy-tabix.
CLEAR gt_bsas.
endif.
endloop.
1. Also make sure that the KEY mentioned in READ statement follows the same seqeunce of gt_bsis structure.
Thanks,
Santosh
Message was edited by:
 SKJ

Problem with context search in iFS

Hello , here is my problem with iFS.
We have installation of Oracle 8.1.7 Enterprise edition with interMedia and iFS 1.1 on same server (Windows NT Server 4.0/512 RAM). During install everything went fine.
I had uploaded about 200 MB files in the iFS (pdf's and html's).
The problem is when I try to use context based search. If I search for file's name everything is fine, but when I search for a word that is in a file it almost immediately gives mi "0 file(s) found", and I'm sure that there are files that have that word in their body's.
What can be the problem?
Any sugestions will be in help.
Thanks in advance.

<BLOCKQUOTE>quote:<HR>Originally posted by mark_d_Drake ():
That's the way it works. Content Indexing is not on insert, it occurs when the ctxsrv process runs. See the IntermediaText doc for more information.
<HR></BLOCKQUOTE>
Documents's content is stored in the GLOBALINDEXEDBLOB column of the IFSSYS.ODMM_CONTENTSTORE table.
There is an text index GLOBALINDEXEDBLOB_I built on this column.
To make the context search possible just update this index using the following command in SQL*Plus:
SQL> exec ctx_ddl.sync_index('GLOBALINDEXEDBLOB_I');
If you want this index be updated automatically when new documents are uploaded/changed/deleted in iFS then start the ctxsrv utility on the computer where your Oracle database resides. To do this issue the following command in OS command line:
ctxsrv -user ctxsys/ctxpwd@db_alias
just replace here ctxpwd and db_alias with real values you specified during the installation.
null

SQL Developer 3 EA2 - Problem with formating plsql source code

I'm using sql developer 3 ea2. I have played with source code formating.
I have 2 issues with formating in source code editor.
I have a plsql string like the following extending over several lines.
s VARCHAR2(2000) := 'SELECT
col1, col2, col3
FROM table
WHERE col4 = :var';The result after apply "format" to my sourcecode ist:
s VARCHAR2(2000) := 'SELECT
col1, col2, col3
FROM table
WHERE col4 = :var';The second is that sql developer ist camelizing the previous line if I type a whitespace in plsql sourcecode.
How to switch that off??
The last issue is realy annoying!
Christian

I am having exactly the same problem. Every time you use Format Ctrl/F7 it adds new line feeds. Code starts off as:
command := '
select account_status, default_tablespace, temporary_tablespace,
to_char(created,"YYYY-MON-DD HH24:MI:SS"), profile
from Dba_Users@@
where username=:1' ;
First Format Ctrl/F7 get an extra blank line:
command := '
select account_status, default_tablespace, temporary_tablespace,
to_char(created,"YYYY-MON-DD HH24:MI:SS"), profile
from Dba_Users@@
where username=:1' ;
Then second Format Ctrl/F7, get THREE extra lines!!! It goes exponential!!
command := '
select account_status, default_tablespace, temporary_tablespace,
to_char(created,"YYYY-MON-DD HH24:MI:SS"), profile
from Dba_Users@@
where username=:1' ;
So far I've only really encountered the problem with dynamic SQL, which ignores the extra line feeds.
i am pretty sure this is a long standing SqlDeveloper Format problem, going back to V2.

Problem with formatted search in grid

Similar Messages

Maybe you are looking for