Problem with formatting of bookmarks in Acrobat Professional

Since a while my bookmarks in Acrobat Professional appear like this, with a fixed blank space. Can anyone tell me how to remove these spaces ?
Thank you very much !

It was reported several times in the past. It seems to be a bug in Acrobat on Mavericks. You should report it to Adobe here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Similar Messages

Problems with our copy of Adobe Acrobat 7 Professional.

We have two problems with our copy of Adobe Acrobat proffesional which we have recently re installed back on the same PC following so we thought the relevant transfer activation instructions.
The first is that when we first start the program with no file loaded Both Transfer Activation and Activate Acrobat are greyout out. This in tiself is not a problem but it may have a bearing on our real problem.
We have for a few years used Acrobat Proffesional successfully to sign released drawing files which have been 'printed' to a PDF file by a third party printer driver. Recently though when we try to load any of this type of file the Acrobat menu stays greyed out and both Adobe Acrobat and the PDF file are listed in Windows task manager. Acrobat is completely locked up and has to be exited via task manager. If I load PDF files from other sources the abot symptoms accur only briefly then the program menus re activate and the PDF file disappears from task manager. It is as thought our PDF drawing files are failing to complete loading.
Does anyone know how I can find out if our copy of Adobe Acrobat Pro 7.0 is actually activated?
Does anyone know what might have started to prevent out drawing files from loading.
Thanks
Chris

Good point but this one does require activation.
Our real issue is that if we load one of our own drawing filkes, even one previously edited or signed with no problems it now completely locks up Adobe acrobat and we cannot do anything at all in Acrobat.

I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing

Application Express 3.1 + BI-Publisher + problem with formating numbers

Hello together!
I use the Oracle BI Publisher Template Builder for Word (10.1.3.4) to generate RTF-Templates. I upload these templates in Oracle Apex (Advanced support-->BI-Publisher/OC4J as print service).
It works well, but I have a problem with formating numbers.
In Template Builder I define following number formats, for example: #.##0 for numbers like 1.454.234 and #.##0,00 for numbers like 54,80
In Template-Builder Preview it looks well.
But whatever I do, in use with Oracle Apex dots and comma are allready interchances in the printout.
That means,
1.454.234 become 1,454,234 in PDF-Report
54,80 become 54.80 in PDF-Report
Other than that, the layout is exactly the same like in Template Builder defined.
What's wrong?
Do I have to change any country parameter?
Juliane

I also had the same problem. I tried with normal formating of 99g99g999d99 instead of ##,##,##0.00 and it has resulted correct way.

Problem with the product activation adobe acrobat 9 standard.

I have a problem with the product activation adobe acrobat 9 standard.
It is a failed hard disk to the pc and was not able to deactivate the license adobe.
Now I replaced the hard drive and reinstalled the software but it tells me that all licenses are used.
Is it possible to unlock the licenses in use?
Thank you.

Adobe can unlock licenses, this is a normal thing for them to do. You must contact them directly, there is no trick or other way.

Problem with Buttons/Form Fields in Acrobat PDF when created in InDesign CS4

So I have been working for quite some time on an interactive form for an internal client at my job. It has two major components, one is the side bar navigation, which I created using buttons in InDesign which link to bookmarks in the document. The second aspect is that I also created "check boxes" accoring to this video: http://www.adobe.com/designcenter/cs4/articles/lrvid4434_ds.html
I have two major issues:
1. Whenever I try to convert my boxes to form fields in Acrobat it will not recognize them unless I save out 4 pages at a time (rather than the whole document).
2. I then have to combine the document and get multiple sets of bookmarks, and some bookamrks are corrupted (not working properly). Even when I try to convert the whole document some of the buttons are corrupted.
UGH tired of this project, I am really bastardizing the whole thing to get it done, but want to figure out the problem as this is an ongoing document that we will be using over and over again in future years.
I am attaching the pdf file--this is a pieced together one (saved out 4 pages at a time) (which I did do some fixes to to get buttons to go to proper locations) and the original indesign file (partial file due to size).
PLEASE OH PLEASE HELP ME!

Acrobat's Form Wizard is good but not perfect when creating form data from a PDF. I have never encountered Acrobat not able to finish the process of creating all form fields, but have encountered very slugish performance afterwards when there was a lot of forms, buttons, and other elements within the pages. And I would say, from your attached PDF, it is pretty heavy with content. I am going to suggest an idea, but I have not tested this to see if it would work.
In InDesign, create a layer for your navigation tabs, and a layer for your text with the check boxes. Create two PDFs from ID, one PDF with just your-nav tabs, the second with just your text with check boxes. In Acrobat, perform the Form Wizard on the second PDF and see if this will finish, the idea here is to reduce the cllutter for the Form Wizard to finish. If it does, you can merge the first PDF as a layer with the second to have a completed document. Again, I have not tested this theory.

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

Multiple Problems with PDF InDesign, Bridge, and Acrobat Reader

I create proof books with a blend of Adobe Bridge & InDesign.
Here is my work flow: I will BOLD the errors I am having and need help with.
Step 1.) I create contact sheets in Bridge and save them as PDF's
Problem with Bridge ( I have another posting for this thread as well under Bridge) I cannot save PDF's larger than 400ish photos at 300ppi (important for my printer) without it saving as a blank PDF. COMPLETELY EMTPY! So I have to split up my photos into groups of 400 or less photos then patch them back together.
Problem with Acrobat: If I patch those PDF’s back together with Adobe Acrobat (a suggestion from another person on here) they save great but I get an error when I try to import them in indesign. The error reading: ERROR. Cannot determine page count.
Please open the PDF file in Acrobat, do a “Save As…” and try again. (99)
Step 2.) I use a script (MultiPageImporter2.2.1.jsx) to import the PDF's into Indesign. (if saved as one pdf in acrobat I get the above error)
Problem With InDesign: I run this importer script in InDesign to create my books with a template I use from my printers. Well since I have to import multiple pdf with multiple pages ( because I can’t piece them together without the above error. Then I have this problem:
I place a pdf with 1-226 pages in. I start this on page 1.
I place the next pdf with 1-141 pages in. I start this on page 227.
An error pops up that says I MUST start my import on page 226!!!!!!!!!! I don’t want to import on page 226 because I have two photos on that page!
I tried it several ways and no matter what I loose my last page of my first import.
PLEASE someone help me! I feel like I might be doing something really silly but I’ve spent 7.5 hours today working on this books with error after error.
I have done all the updates on my computers and nothing works. I use two macs and both have the same errors. I have a mac-book Pro | snow leopard and a Imac | snow leopard.
Thanks much!

All your problems seem to stem from the PDFs that you are making from Bridge. What you are describing should be perfectly possible, but the fact that Bridge doesn't want to make a PDF with more than 400 photos and it all goes downhill from there makes me suspect Bridge.
Here's a plugin that may help? Looks pretty cheap for what it does.
Apart from that I'd try to clean up the PDFs that Bridge is producing if Indesign doesn't like them. One way would be to print to a new PDF, after you've combined them as necessary.
As to the last pronlem you mention, where it forces you to place on page 226, have you tried creating a blank page 227 first, before you try placing?

Compatibility problem with GoLive 5.0 and Acrobat 6.0 Standard?

Whenever I add pdf files created with Acrobat 6.0 to the GoLive 5.0 site window a question mark or the little green bug appears next to the file. The bug/question mark does not go away when I link to the file. Moreover, trying to delete it in GoLive's trash is almost impossible. No matter how many times I try, it continues to appear in Site Trash (under the Extras tab). Has anyone out there had problems with pdf files and GoLive 5.0? Thanks for the help!

Almost all versions of Acrobat came with Distiller since version 1.0. There was a version of Acrobat Approval 5.0 that did not come with Distiller, but that wasn't really a full version of Acrobat.
...Mike

SQL Developer 3 EA2 - Problem with formating plsql source code

I'm using sql developer 3 ea2. I have played with source code formating.
I have 2 issues with formating in source code editor.
I have a plsql string like the following extending over several lines.
s VARCHAR2(2000) := 'SELECT
col1, col2, col3
FROM table
WHERE col4 = :var';The result after apply "format" to my sourcecode ist:
s VARCHAR2(2000) := 'SELECT
col1, col2, col3
FROM table
WHERE col4 = :var';The second is that sql developer ist camelizing the previous line if I type a whitespace in plsql sourcecode.
How to switch that off??
The last issue is realy annoying!
Christian

I am having exactly the same problem. Every time you use Format Ctrl/F7 it adds new line feeds. Code starts off as:
command := '
select account_status, default_tablespace, temporary_tablespace,
to_char(created,"YYYY-MON-DD HH24:MI:SS"), profile
from Dba_Users@@
where username=:1' ;
First Format Ctrl/F7 get an extra blank line:
command := '
select account_status, default_tablespace, temporary_tablespace,
to_char(created,"YYYY-MON-DD HH24:MI:SS"), profile
from Dba_Users@@
where username=:1' ;
Then second Format Ctrl/F7, get THREE extra lines!!! It goes exponential!!
command := '
select account_status, default_tablespace, temporary_tablespace,
to_char(created,"YYYY-MON-DD HH24:MI:SS"), profile
from Dba_Users@@
where username=:1' ;
So far I've only really encountered the problem with dynamic SQL, which ignores the extra line feeds.
i am pretty sure this is a long standing SqlDeveloper Format problem, going back to V2.

Problem with formatting taglib

I am trying to use the JSTL formatting taglib using JBoss 402 and am having a problem with the <fmt:message tag. Every reference to a message resource, such as <fmt:message key="xyz" /> is not resolved, and instead the value '???xyz???' is always displayed.
I have made sure that my 'messages.properties' file is in /WEB-INF/classes so that it is in the classpath, and have included the tags below, but these have not changed a thing. Anyone have any ideas or suggestions as to what the problem might be?
<fmt:setLocale value="${locale}" />
<fmt:bundle basename = "messages" />

There are a couple of JSTL tags that deal with bundles.
The bundle tag you are using here needs the <fmt:message> tag nested inside it:
<fmt:setLocale value="${locale}" />
<fmt:bundle basename = "messages">
<fmt:message key="xyz"/>
</fmt:bundle>alternatively use the <fmt:setBundle> tag
<fmt:setBundle basename="messages"/>
<fmt:message key="xyz"/>Cheers,
evnafets

Problems with producing PDFs via Adobe Acrobat Prof 11

Hello we have the following problem:
While producing several word documents via PDF Printer (we have insallted the latest version of Adobe Acrobat Professional 11) we receive error messages like
%%[ ProductName: Distiller ]%%
%%[ Error: /EMC pdfmark without matching BMC/BDC.]%%
%%[Page: 1]%%
%%[Page: 2]%%
%%[Page: 3]%%
%%[Page: 4]%%
%%[ Error: limitcheck; OffendingCommand: pdfmark ]%%
Stack:
-mark-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Using the Word 2010 Add inn (producing PDF), it works.
What is the problem?
Thanks for ur help.
S.H-Schuett

Hi,
I'm having a similar problem and it's disappointing that no one has responded to the original posing from April 2013.
I was extracting a range of pages from Framemaker 7 to PDF using the Acrobat 6 Distiller. The PS file failed to convert to PDF and the log file contained these errors. What is the meaning of the "Error: undefined" statement? How can I figure out where the error is occurring?
Yours,
Michael F
=====================================================================
%%[ ProductName: Distiller ]%%
%%[ Warning: Helvetica not found, using Font Substitution. Font cannot be embedded.]%%
%%[ Warning: Helvetica-Bold not found, using Font Substitution. Font cannot be embedded.]%%
%%[ Warning: Times-BoldItalic not found, using Font Substitution. Font cannot be embedded.]%%
%%[ Warning: Times-Roman not found, using Font Substitution. Font cannot be embedded.]%%
%%[ Error: undefined; OffendingCommand: pdfmark ]%%
Stack:
/StRetrieve
/P82708
/StoreName
-dict-
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%

Problem with formatting date with JSTL ans swedish locale

Hi,
I have a strange problem with JSTL fmt:formatDate -tag and swedish locale.
-------------------------- Extract from the JSP ------------------------------
<jsp:useBean id="date" class="java.util.Date" />
<fmt:formatDate value="${date}" pattern="dd.MM.yyyy HH:mm" />
With en_US and fi_FI locales date is printed just the way I want: 29.04.2005 13:28 but in se_SE locale it is printed: Fri Apr 29 13:30:09 EEST 2005
Has anyone had this problem before?
Thanks in advance!

Hi
Try using "sv_SE" locale.

Problem with formatting text in textobjects with right aligned tabulators

Post Author: Jens Kluesener
CA Forum: General
HiI want to print out some values in a line. So I put a Textobject in the Report with some right aligned tabulators (left aligned tabulators working fine). Then I insert a formula. In this formula i do this:"1"chr(9)"2"chr(9)"3"chr(9)"4"chr(9)"5"chr(9)"6"chr(9)"7"Look: Many ThanksJens

I think i found why.
There was no problem with TextField.
There was a problem with Array. "CityArea"
So each time I executed script it added new string in Array. And that is because i got like:
TextField
City 1
City 2
City 1
City 2
Running this script is Ok:
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
But outside of this for loop there is another for loop for adding Cities in CityArray.
I fixed it by adding empty array at the start of function
function myFunc():void
CityArea = [ ]; // Empty array fixed this issue
// LOOP FOR ADDING SHOPS IN CITY AREA
for (var j:int = 0; j < _Shops; j++)
CityArea.push(_Shop);
// FOR LOOP TO ADDING SHOPS IN STRING
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
Thank you for your help kglad

Problem with diacritics when export in Acrobat(PDF)

Hello,
I use reporting service from Sql Server 2008 R2 and I have a problem when I export in Acrobat(PDF) format. All the 'ș' and 'ț' are after export in pdf just a square.
Can you please help me. Thanks.

Hi Alin-g,
SQL Server 2008 R2 Reporting Services supports Adobe Acrobat 6 or later. So, please make sure your current Acrobat version meets the requirement.
Besides, the font in the PDF format may be different with that in the HTML rendering extension because GDI font substitution in those formats behaves differently. If there is a font missing on the client, you might see characters replaced with boxes (□).
For more information, please see:
Exporting to a PDF File (Report Builder 3.0 and SSRS)
Regards,
Mike Yin
TechNet Community Support

Problem with formatting of bookmarks in Acrobat Professional

Similar Messages

Maybe you are looking for