Problem with Forum Access
Anyone know who I can call or talk about my forum acct? I created this acct temporarily since my existing acct. is not letting me logon and the E-service center has no idea and everyone tells me to call the e-service center.
Need help pls
Solved!
Go to Solution.
In order for us to get a better handle on how widespread the login issues are, please post your issues in this thread to keep all the issues in one place.
Thank You
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.
Similar Messages
-
Problem with file access in other computer in jsp
I have problem with file accessing in other computer in jsp.
The follow code
File folder=new File("Z:"+File.separator+"sharefolder");//Z is a net share driver
File[] files=folder.listFiles();
System.out.println("test");
System.out.println("length="+files.length);
will throw exception at the second print.
but it works well in main funtion.
Is anybody know what is the problem.
JSP works on windows2003 server,tomcat 5.0.28 JDK1.4 net share folder on windows2000 serverno error code for this.But when I start tomcat I get the follow error.
java.lang.IllegalArgumentException: Document base Z:\ does not exist or is not a readable directory
at org.apache.naming.resources.FileDirContext.setDocBase(FileDirContext.java:138)
at org.apache.catalina.core.StandardContext.resourcesStart(StandardContext.java:3910)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4138)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
at org.apache.commons.digester.Rule.end(Rule.java:276)
at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1567)
at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
at org.apache.catalina.core.StandardService.start(StandardService.java:480)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Error in resourceStart()
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Error getConfigured
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Exception during cleanup after start failed
LifecycleException: Container StandardContext[msgstore] has not been started
at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4466)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4371)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
at org.apache.commons.digester.Rule.end(Rule.java:276)
at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.commons.digester.Digester.parse(Digester.java:1567)
at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
at org.apache.catalina.core.StandardService.start(StandardService.java:480)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287) -
With the newly released Verizon Access Manager 7.7.1.0 (2707e) there is a significant computer focus problem with it.
What I mean by this is that if I am using ANY application on my computer with the Verizon Access Manager minimized to the Windows System Tray, something will go on with the Verizon Access Manager and it steals the window focus - I am unable to work in the other application unless I click on the application to use it again.
An example of this would be my typing to post a message in this forum. Something occurs in the Verizon Access Manager and my typing is rendered useless unless I click with my mouse on the browser window to be able to use it again.
I'm highly suspecting whenever networks are coming and going in the Access Manager is when the problem occurs.
This problem did not exist in the previous version of the Access Manager I was using.
This is extremely annoying - please issue a fix for this ASAP!I have found by not minimzing the Verizon Access Manager 7.7.1.0 (2707e) the focus problem does not occur - it appears to be a problem when the app is minimzed to the system tray.
-
Remote Delta link setup problem with Bean / Access Service
Hello,
I am trying to setup Remote Delta Link (RDL) between two portals. (Both portals same version - EP 7.0 EHP1 SP 05 - are in the same domain)
I already have the Remote Role Assignment working without any issues.
The following have been done successfully:
1. Same user repository has been setup for both the portals
2. Setup trust between producer and consumer (SSO working fine)
3. Producer added and registered succesfully on consumer
4. Permissions setup on producer and consumer
4. pcd_service user with required UME actions setup
I am able to see all the remote content in the Consumer portal.
When I try to copy the remote content and paste it as local content, I am getting the following error:
Could not create remote delta link to object 'page id'. Could not connect to the remote portal. The remote portal may be down, there may be a network problem, or your connection settings to the remote portal may be configured incorrectly.
After increasing the log severity, I am able to see the following in Default Trace:
com.sap.portal.fpn.transport.Trying to lookup access service (P4-RMI) for connecting to producer 'ess_int' with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
com.sap.portal.fpn.transport.Unable to lookup access service (P4-RMI) with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
AbstractAdvancedOperation.handleDirOperationException
[EXCEPTION]
com.sap.portal.pcm.admin.exceptions.DirOperationFailedException: Could not retrieve the bean / access service to connect with producer
Could not retrieve the bean / access service to connect with producer
Like you can see above, there is some bean / access service which is not retrieved successfully. I am not sure if this is a permission problem on the consumer.
I have checked that the P4 ports are configured correctly (standard - not changed) and I am able to telnet from producer to consumer (and vice versa) on the P4 port.
I am stuck at this point and am not able to find any information on this.
I would really appreciate if some one can point me in the right direction.
Thank you for reading.
- RajHi Raj,
Please check your config of the P4 port on the producer. Is it really 50004 (check SystemInfo of the producer)?
I do think there's a problem with the P4 communication since RDL requires P4 connection.
Do you have load balanced consumer-producer connection? Please refer to this blog for further details
Little known ways to create a load balanced Consumer Producer connection in a FPN scenario
Regards,
Dao -
Problem with MS Access Files and executable files migrateds
Hi all.
We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES 2 SP2a. I already migrated one volume and in this weekend well migrate the last, and most important, volume to new OES 2 server.
The problem is about some MS Access databases that are very very used for all users and some executable applications that was writed using fisical path like \\OLDSERVER\VOL\PATH\APP.EXE or some links to libraries, databases, images, etc.
The old NW 6.0 server will be removed from the tree in 2 or 3 weeks and in this time the two servers will co-exists. I want to know if it is possible redirect NCP requests to OLDSERVER to NEWSERVER without users rewrite all of MS Access and executable applications. Is it possible?
Tks
Alan Cota.AlanCota wrote:
>
> Hi all.
>
> We are migrating an old Netware 6.0 server to new SLES 10 SP3 with OES
> 2 SP2a. I already migrated one volume and in this weekend we´ll migrate
> the last, and most important, volume to new OES 2 server.
>
> The problem is about some MS Access databases that are very very used
> for all users and some executable applications that was writed using
> fisical path like \\OLDSERVER\VOL\PATH\APP.EXE or some links to
> libraries, databases, images, etc.
>
> The old NW 6.0 server will be removed from the tree in 2 or 3 weeks and
> in this time the two servers will co-exists. I want to know if it is
> possible redirect NCP requests to OLDSERVER to NEWSERVER without users
> rewrite all of MS Access and executable applications. Is it possible?
>
> Tks
>
> Alan Cota.
>
>
Have you considered trying to use a dns alias to it. I have not tested with
MS access specifically but many other apps it works perfectly for. This is
how I get around those issues. Of course your issue is that you still
havethe existing server in the tree. How much will there still be on the
old server. You could rename the old nw server and than update its info in
dns to resolve this. -
Problem with Dynamically accessing EJB Class objects in WL 7.0 SP1
I am trying to build a component which has the ability to instantiate and execute
an known EJB method on the fly.
I have managed to build the component but when I try and execute it I get a ClassNotFoundException.
I know that the EJB I am trying to invoke is deployed and available on the server,
as I can see it in the console, I also seen to have been able to get the remote
interface of the object, my problem occurs when I try and access the class object
so I can perform a create on the object and then execute my method
The code I have written is below:
private Object getRemoteObject(Context pCtx, String pJNDIName, String pHomeBean)
throws Exception {
String homeCreate = "create";
Class []homeCreateParam = { };
Object []homeCreateParamValues = {};
try {
//This call seems to work and doesn't throw an exception
Object home = pCtx.lookup(pJNDIName);
//However this call throws a java.lang.ClassNotFoundException
Class homeBean = Class.forName(pHomeBean);
Method homeCreateMethod = homeBean.getMethod(homeCreate,homeCreateParam);
return homeCreateMethod.invoke(home, homeCreateParamValues);
} catch (NamingException ne) {
logStandardErrorMessage("The client was unable to lookup the EJBHome.
Please make sure ");
logStandardErrorMessage("that you have deployed the ejb with the JNDI
name "+pJNDIName+" on the WebLogic server ");
throw ne;
} catch (Exception e) {
logStandardErrorMessage(e.toString());
throw e;
Any advice would be really appreciated, I'm fast running out of ideas, I suspect
it has something to do with the class loader but I'm not sure how to resolve it
Regards
Jo CorlessHello Joanne,
Congratulations! I'm very happy that you've managed to fix your problem. It's
always essential to understand how to package applications when deploying on BEA
WebLogic. Usually, by throwing everything into an EAR file solves just about all
the class loader problems. :-) Let us know if you have any further problems that
we can assist you with.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
"Joanne Corless" <[email protected]> wrote:
>
>
I've fixed it!!!!!!!!
Thanks to everyone who gave me help!!!!
The class loader was the culprit which is what I suspected all along.
As soon
as I put the 2 jar files I was using into an EAR file the problem went
away!!!!!
Thanks again
Jo Corless
"Ryan LeCompte" <[email protected]> wrote:
Hello Joanne,
As Mr. Woollen mentioned, I also believe it's a problem with the class
loader.
You need to be careful how you arrange your EJBs, because WebLogic has
a specific
method in which it loads classes in an EAR, JAR, and WAR file(s). Please
refer
to http://dev2dev.bea.com/articles/musser.jsp for more information about
BEA WebLogic
class loading mechanisms and caveats. Also, try printing out the various
methods
that are available on the object that was returned to you via reflection.
For
example, use the getMethods() method, which returns an array of Method
objects
that you can subsequently cycle through and print out the various method
names.
This way you can discover if the class found/returned to you is indeed
the one
you intend to locate.
Hope this helps,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
Rob Woollen <[email protected]> wrote:
I believe the issue is the home interface class for this EJB is not
available in the class loader which is doing the reflection.
If you do:
getClass().getClassLoader().loadClass(homeInterfaceClassName)
I suspect it will fail. Reflection still requires that the class be
loadable.
-- Rob
Joanne Corless wrote:
Hi Slava,
If I make my code look like you describe below I get a compliationerror telling
me that
home.getMethod() is not recognised (no such method)
If I change it slightly and use
Method homeCreateMethod =
home.getClass().getMethod(homeCreate,homeCreateParam);
The code will compile OK but when executed it still throws a NoSuchMethodException
Any ideas ?
Thanks for your help so far
Regards
Jo Corless
Your code should look like
Object home = pCtx.lookup(pJNDIName);
Method homeCreateMethod =
home.getMethod(homeCreate,homeCreateParam);
return homeCreateMethod.invoke(home, homeCreateParamValues);
Regards,
Slava Imeshev
"Joanne Corless" <[email protected]> wrote in message
news:[email protected]...
Hi Ryan,
I also wanted to mention that if you do a "header search" in this
particular
newsgroup
with the search query as "reflection", you will see many previousmessages
regarding
reflection and EJBs. I believe you could learn a lot from thedifficulties
that
others have faced and solved.I tried that and although there was a number of similar cases noneof them
actually
seem to fix my issue. Thanks for the suggestion though
Are the EJBs that you are trying to access accessible via your
system
classpath?
Try to avoid having them accessible via the main system classpath,and
only bundle
them in your appropriate EJB jar files (contained in an EAR file,for
example).Maybe I should have laid the problem out a little clearer.
I have a number of EJB's bundled up in a JAR file which is hot deployedto
the
server. Within this first JAR file is an EJB (SSB) component that
needs
to
be
able to invoke a known method on another EJB. This second EJB may
or
may
not be
within the first JAR file but it also will be hot deployed.
The component trying to invoke the method on the 2nd EJB has to
be
able to
create
an instance of the 2nd EJB without actually knowing anything bar
a
JNDI
Name which
is passed in at runtime.
I can get as far as doing the
Object home = pCtx.lookup(pJNDIName);
This returned a class with the name
"com.csc.edc.projects.allders.httppostoffice.postman.PostmanBean_mp8qy2_Home
Impl_WLStub"
My problem seems to occur when I try and invoke the create method
Method homeCreate = home.getClass().getMethod("create", new Class[0]);
My code throws a java.lang.NoSuchMethodException at this point so
I
am
unable
to progress to the next step of :
Object bean = homeCreate.invoke(home, null);
So I can return the instantiated bean back to the calling client.
Why am I getting the NoSuchMethodException, is is because I am gettinga
stub
back rather than the home interface and if so how do I get the truehome
interface
from the bean
Thanks in advance
Jo Corless -
Problem with users accessing sharepoint 2013 site collection
I have an unbeliveable problem..
I have a sp site with several site collections..
I have around 15 users.. Everybody have access to the root site. Two users do not have access to site collections even though they are in EXACTLY same permission groups like other users who can access those site collections!
I tried to delete them from all user groups in SP, then delete their user profiles in Central Administration, and delete them from Active Directory. After that I recreated their profiles in Active directory, readded them to Central Administration, and again
added them to coresponding groups in SharePoint site collections. They again CAN NOT ACCESS site collections.
What should I do.. This is incredible that 5 users with the same user privileges can access site collections, and 2 can not, even though they are all created in the same way..
Regards,
SrdjanHello,
Have you found a solution for this problem? I have the exact same problem with 2 users accessing a site collection (access denied). I found also this row on uls log:
Access Denied. Exception: Attempted to perform an unauthorized operation., StackTrace: at Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(Exception ex) at Microsoft.Office.Project.PWA.PJBaseWebPartPage.OnPreInit(EventArgs
e) at System.Web.UI.Page.PerformPreInit() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionSt... 6955b79c-c42c-50fc-84f8-2b68f97002ea -
Still having problems with VPN access
Hello!
I am having problems with my VPN clients getting access to the networks over a MPLS infrastruture. I can reach these resources form my Core network (172.17.1.0/24) and my Wifi (172.17.100.0/24) but not from my VPN network (172.17.200.0/24). From the VPN I can reach the Wifi network (which is behind a router) and the rule that allows that also allows access to the other networks but for some reason it is not working.
When I ping inside the core network from VPN I can connect and get responses. When I ping to the Wifi network, I can get responses and connect to resources there. A tracert to the wifi network shows it hitting the core switch (a 3750 stack) @ 172.17.1.1, then the Wifi router (172.17.1.3) and then the host. A tracert to a resource on the MPLS network from the VPN shows a single entry (the destination host) and then 29 time outs but will not ping that resource nor connect.
I've posted all the info I can think of below. Any help appreciated.
*** Here is a tracert from a core network machine to the resource we need on the MPLS:
C:\Windows\system32>tracert 10.2.0.125
Tracing route to **************** [10.2.0.125]
over a maximum of 30 hops:
1 1 ms <1 ms <1 ms 172.17.1.1
2 1 ms <1 ms <1 ms 172.17.1.10
3 5 ms 5 ms 5 ms 192.168.0.13
4 31 ms 30 ms 31 ms 192.168.0.5
5 29 ms 30 ms 29 ms 192.168.0.6
6 29 ms 29 ms 29 ms 192.168.20.4
7 29 ms 29 ms 29 ms RV-TPA-CRMPROD [10.2.0.125]
Trace complete.
172.17.1.10 is the mpls router.
**** Here is the routing table (sh ip route) from the 3750 @ 172.17.1.1
Gateway of last resort is 172.17.1.2 to network 0.0.0.0
S 192.168.30.0/24 [1/0] via 172.17.1.10
172.17.0.0/24 is subnetted, 3 subnets
S 172.17.200.0 [1/0] via 172.17.1.2
C 172.17.1.0 is directly connected, Vlan20
S 172.17.100.0 [1/0] via 172.17.1.3
172.18.0.0/24 is subnetted, 1 subnets
S 172.18.1.0 [1/0] via 172.17.1.10
S 192.168.11.0/24 [1/0] via 172.17.1.10
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
S 10.2.0.0/24 [1/0] via 172.17.1.10
S 10.10.10.0/24 [1/0] via 172.17.1.10
S 10.20.0.0/24 [1/0] via 172.17.1.10
S 10.3.0.128/25 [1/0] via 172.17.1.10
S 192.168.1.0/24 [1/0] via 172.17.1.10
S* 0.0.0.0/0 [1/0] via 172.17.1.2
*** Here is the firewall config (5510):
ASA Version 8.4(1)
hostname RVGW
domain-name ************
enable password b5aqRk/6.KRmypWW encrypted
passwd 1ems91jznlfZHhfU encrypted
names
interface Ethernet0/0
nameif Outside
security-level 10
ip address 5.29.79.10 255.255.255.248
interface Ethernet0/1
nameif Inside
security-level 100
ip address 172.17.1.2 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 172.19.1.1 255.255.255.0
management-only
banner login RedV GW
ftp mode passive
dns server-group DefaultDNS
domain-name RedVector.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network WiFi
subnet 172.17.100.0 255.255.255.0
description WiFi
object network inside-net
subnet 172.17.1.0 255.255.255.0
object network NOSPAM
host 172.17.1.60
object network BH2
host 172.17.1.60
object network EX2
host 172.17.1.61
description Internal Exchange / Outbound SMTP
object network Mail2
host 5.29.79.11
description Ext EX2
object network NETWORK_OBJ_172.17.1.240_28
subnet 172.17.1.240 255.255.255.240
object network NETWORK_OBJ_172.17.200.0_24
subnet 172.17.200.0 255.255.255.0
object network VPN-CLIENT
subnet 172.17.200.0 255.255.255.0
object-group service DM_INLINE_TCP_1 tcp
port-object eq www
port-object eq https
object-group network DM_INLINE_NETWORK_1
network-object object BH2
network-object object NOSPAM
object-group network VPN-CLIENT-PAT-SOURCE
description VPN-CLIENT-PAT-SOURCE
network-object object VPN-CLIENT
object-group network LAN-NETWORKS
network-object 10.10.10.0 255.255.255.0
network-object 10.2.0.0 255.255.255.0
network-object 10.3.0.0 255.255.255.0
network-object 172.17.100.0 255.255.255.0
network-object 172.18.1.0 255.255.255.0
network-object 192.168.1.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 192.168.30.0 255.255.255.0
object-group network VPN-POOL
network-object 172.17.200.0 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
access-list Outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq smtp
access-list Outside_access_in extended permit tcp any object BH2 object-group DM_INLINE_TCP_1
access-list global_mpc extended permit ip any any
access-list Inside_access_in extended permit object-group DM_INLINE_PROTOCOL_1 any any
pager lines 24
logging enable
logging asdm informational
no logging message 106015
no logging message 313001
no logging message 313008
no logging message 106023
no logging message 710003
no logging message 106100
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302018
no logging message 302017
no logging message 302016
no logging message 302021
no logging message 302020
flow-export destination Inside 172.17.1.52 9996
mtu Outside 1500
mtu Inside 1500
mtu management 1500
ip local pool VPN 172.17.1.240-172.17.1.250 mask 255.255.255.0
ip local pool VPN2 172.17.200.100-172.17.200.200 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (Inside,Outside) source static EX2 Mail2
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.200.0_24 NETWORK_OBJ_172.17.200.0_24
nat (Inside,Outside) source static inside-net inside-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static LAN-NETWORKS LAN-NETWORKS destination static VPN-POOL VPN-POOL
object network inside-net
nat (Inside,Outside) dynamic interface
object network NOSPAM
nat (Inside,Outside) static 5.29.79.12
nat (Outside,Outside) after-auto source dynamic VPN-CLIENT-PAT-SOURCE interface
access-group Outside_access_in in interface Outside
access-group Inside_access_in in interface Inside
route Outside 0.0.0.0 0.0.0.0 5.29.79.9 1
route Inside 10.2.0.0 255.255.255.0 172.17.1.1 1
route Inside 10.3.0.0 255.255.255.128 172.17.1.1 1
route Inside 10.10.10.0 255.255.255.0 172.17.1.1 1
route Inside 172.17.100.0 255.255.255.0 172.17.1.3 1
route Inside 172.18.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.11.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.30.0 255.255.255.0 172.17.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server RedVec protocol ldap
aaa-server RedVec (Inside) host 172.17.1.41
ldap-base-dn DC=adrs1,DC=net
ldap-group-base-dn DC=adrs,DC=net
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=Hanna\, Roger,OU=Humans,OU=WPLAdministrator,DC=adrs1,DC=net
server-type microsoft
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 172.17.1.0 255.255.255.0 Inside
http 24.32.208.223 255.255.255.255 Outside
snmp-server host Inside 172.17.1.52 community *****
snmp-server location Server Room 3010
snmp-server contact Roger Hanna
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
crypto ikev1 enable Outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
telnet 172.17.1.0 255.255.255.0 Inside
telnet timeout 5
ssh 172.17.1.0 255.255.255.0 Inside
ssh timeout 5
console timeout 0
dhcpd address 172.17.1.100-172.17.1.200 Inside
dhcpd dns 172.17.1.41 172.17.1.42 interface Inside
dhcpd lease 100000 interface Inside
dhcpd domain adrs1.net interface Inside
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
group-policy RedV internal
group-policy RedV attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
default-domain value ADRS1.NET
group-policy RedV_1 internal
group-policy RedV_1 attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
default-domain value adrs1.net
username rparker password FnbvAdOZxk4r40E5 encrypted privilege 15
username rparker attributes
vpn-group-policy RedV
username mhale password 2reWKpsLC5em3o1P encrypted privilege 0
username mhale attributes
vpn-group-policy RedV
username dcoletto password g53yRiEqpcYkSyYS encrypted privilege 0
username dcoletto attributes
vpn-group-policy RedV
username rhanna password Pd3E3vqnGmV84Ds2 encrypted privilege 15
username rhanna attributes
vpn-group-policy RedV
tunnel-group RedV type remote-access
tunnel-group RedV general-attributes
address-pool VPN2
authentication-server-group RedVec
default-group-policy RedV
tunnel-group RedV ipsec-attributes
ikev1 pre-shared-key *****
class-map global-class
match access-list global_mpc
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
class global-class
flow-export event-type all destination 172.17.1.52
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:202ad58ba009fb24cbd119ed6d7237a9Hi Roger,
I bet you already checked it, but does the MPLS end router has route to VPN client subnet 172.17.200.x (or default) pointing to core rtr)?
Also, if the MPLS link has any /30 subnet assigned, you may need to include that as well in Object group LAN-NETWORKS.
Thx
MS -
Could not find the main class - Problem with Webservice-Access
Hello Everybody,
I'm having serious Problems with accessing a WebService (Tomcat-Axis) per executable jar-File.
I constructed a simple GUI with 3 Textboxes 1 Button and 1 Resultbox.
I use eclipse so it was no Problem to simple generate the Backgroundclient by Processing the .wsdl-File of the WS.
Now I do this:
Head_tServiceLocator serviceLocator = new Head_tServiceLocator();
Head_t service = serviceLocator.getRPCCall();
RPCCallSoapBindingStub Head_t = (RPCCallSoapBindingStub) service;and use the Webservice like an Object.
All this works very well.
Now the Problem:
Head_t service = serviceLocator.getRPCCall();this Line has to throw a ServiceException.
If i add a try-catch Block to Process the Message JAVA tells me after i exported to JAR (with Manifest-stuff and so on) and double Click on the JAR the following :
Could not find the main Class - Program will exit.
And if i add a throws Declaration to the Methodheader it tells me:
Fatal Exception Occured - Program will exit
But if i Comment out that Line at least the GUI is being displayed (so it DOES find the main-Class). But then of course the Webservice won't be accessed.
All the JARs needed (axis.jar, commons-discovery.jar and so on) are in the same Directory as the Webservice-Client.jar
Please Help me.
Greets,
ZapI am not done any typing mistake while creating the jar file i already followed the suggestion that you have mentioned but still the same error .
This is my MANIFEST.MF file created under META-INF folder
Manifest-Version: 1.0
Class-Path: qtjambi-4.4.3_01.jar qtjambi-win32-msvc2005-4.4.3_01.jar
Created-By: 1.5.0 (Sun Microsystems Inc.)
Main-Class: Ui_MainWindow
When i extracted the app.jar following this i got
1. META-INF folder inside that MAINFEST.MF file the contents i have already placed above
2. qtjambi-4.4.3_01.jar
3. qtjambi-win32-msvc2005-4.4.3_01.jar
4. Ui_MainWindow.class
Please tell me whats wrong in that i can also give you the app.jar file please let me know the email id .. -
Problem with Restrict Access to Page with access level using ASP
I'm using Dreamweaver CS3 with ASP-VBScript and an Access
database. The pages were created from scratch for this project,
using those tools all the way through.
I've created a login page, an admin homepage, and add, edit,
and list records pages for three tables. The login page uses the
Server Behavior "Log in User", all other pages use the Server
Behavior "Restrict Access to Page". All of these are based on an
Access Level.
Login seems to work correctly, and redirects to the admin
homepage. From the admin homepage, I can open any other page as
expected, and they initially display correctly. On the add and edit
pages, however,
submitting the form often results in getting logged out, but
not always.
Once this happens, I can log back in, but other problems will
sometimes occur during that second login session. Sometimes,
logouts will occur on pages that worked fine during the first login
session. Sometimes, another session variable that I've setup
manually will change when it shouldn't...as if there were two
values stored for my session variable, and reloading the page
changes to the other value.
This
post seems closest to my experience, but it doesn't look like
there was really an answer beyond "I had to fight with it for a bit
to get it to work":
I suspected that there is some problem with session settings
on the server. We have an almost identical tool on the same server
that was developed with an older version of DW that works more
reliably; it sometimes has problems with the initial login, but
never has a problem after that.
Has anyone experienced problems like this? Any suggestions
for what to check? I'm really pulling my hair out since it's so
unreliable...the kind of problem that goes away when you try to
show someone and comes back when they leave.Hello,
I was thinking that all I would need would be the username, although username and paswsword would be more secure. There are about 50 users and no groups or levels. They are all equal ... same level.
The website is private and there is a general content area for all users and then there will be private areas for each user where proprietary documents will be held. I need to be able to ensure that user 'A' can only see the user 'A' pages, user 'B' can only see user 'B', etc.
I don't really understand what the Dreamweaver script is doing, but the overview sounded like it was the right tool to accomplish what I'm trying to do.
Any assistance greatly appreciated.
thanks. -
Problem with Table Access Full
Hi,
Please help me how to resolve the problem of table access full, when i am executing query i facing a problem with these. all though i have create index on these is queru but execution time taking too late.
Also please help if there any syntax to run faster execution.
Thanks in Advance
SreenivasHi,
Please try to analyze your tables once with DBA's help.
If the above does not work, try to use hints which will force use the index created on the column.
Do not use any conversion functions on that column, in the where clause while checking any condition.
If you are storing numbers in a character column, try to have the conditional value as character value in where clause instead of number type.
Thanks and Regards,
Sridhar. -
Weird Safari problems with Forum
I've been having random problems with the forum and Safari. When I am not logged in I see this:
Every user, every post is the same except for the occasional (see the 7th row) odd one. I'm also not able to sign on. The login screen comes up but when I enter my un and pw the next page just reloads in a constant loop during the redirect. This is happening on 4 different computers 3 with OSX 10.8.2 and one with the lateest version of OSX 10.7. All have the latest version of Safari...The forum database crashed a few days ago. There's all sorts of oddities. Not browser related (though of course you could always use a "decent" browser ).
Mylenium -
Problem with Clean Access Agent and Windows Updater
I have a problem with a laptop when using Cisco Clean Access Agent. The agent keeps directing the laptop to get updates from the Windows Update site, but when I have connected the laptop via cable, windows updates tells me there are no updates either essential or optional. The laptop is a Sony VIVO VGN-FJ270 running XP Home Edition SP2 and the Clean Access Agent is version 4.0.2.1
Any help is appreciated!!Verify the allowed hosts in CCA agent.
Try these link:
http://www.cisco.com/en/US/products/ps6128/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a81.shtml -
Hi guys,
I've been trying to access the Market Place as well as my account at: www.renderosity.com, but when I click to the Market Place on the link I get the message below (included also is my correspondence with the site's admin). I can access the rest of the site with no seeming problem. And it seems to be only that site that I have been having problems with. I have Java enabled and the block pop-up is unchecked. But it is only with that site that I am having problems with. They have had no reports of any problems from their side. Thanks for any help. Please reply to my other e-mail: [email protected]
Cheers;-)
Michael
404 Not Found
http://219.235.223.223/forbid.htm
Not Found
The requested URL /forbid.htm was not found on this server.
Apache/1.3.22 Server at WebRoad Port 80
Hi Michael,
Do you have javascript enabled? Are you running any security software?
Karen
Michael Boatwright wrote:
Hi Karen,
I finally managed to get through to the Market Place, but this is how the page looked (See Attached image). Any ideas? I still cannot get into my account though.
Hi Michael,
I've never seen that url before which is why I got confused.
Try this one and let me know if you have problems.
http://market.renderosity.com/
Regards,
Debbie Montique
MarketPlace Manager
Michael Boatwright wrote:
Hi Deb,
and thanks for the quick reply. That URL is what shows up when I click on the Market Place Home. Maybe it's just temporary. I certainly hope so! I've never had this problem before. I guess time will tell. Thanks again.
Cheers,
Michael
Hi Michael,
We're not aware of any problem on the site. Can you please give me the exact URL that you are trying to access?
Additionally, it may be helpful if you log out of Renderosity, empty your cookies and cache on your browser, and then sign back in and see if that resolves the problem.
Kind regards,
Karen Janes
Renderosity Admin Team
Michael Boatwright wrote:
Hi guys,
I have never had problems before with access to any part of Rendo and even now I can access parts of your site, but I can neither access my account nor the market place. Is there something going on from your end? Here is the message that I'm getting when I try to get to those parts of the site that I just mentioned:Hi Ayesh,
Per my test, it seems that the Site Collection Access is only available for the local group of that site collection which is used to store the site collection local term sets.
To make the site collection local group available, please refer to the steps in the link below:
http://www.dotnetsharepoint.com/2013/10/how-to-get-site-collection-local-term.html#.U-PVOvmSyd5
After that, you will see the Site Collection Access when you click the group in Term Store Management.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Pismo: problem with Ethernet access
Hello. I have a new (used) Pismo with OS 10.3 installed. I operate a LAN via a DSL connection. I cannot get the Pismo on to the network. I use a cable that works fine with my G4 iBook, but when moved over to the Pismo; the Pismo cannot be made to access the LAN. I have looked over all the settings and cannot figure it out. This is also happening with a similarly configured G3 iBook SE (clam shell). Any ideas or suggestions. Thanks.
Peter,
OK, that is similar to my own setup (substituting a cable modem for the DSL, but I used to have a DSL). Wondering why you are using the LinkSys Router instead of the Airport Base station, since the ABS will do everything as well as pass Appletalk packets (between computers, wired and wireless) while the Linksys will only work with TCP/IP.
Anyway, I assume you Linksys is set up to hand out DHCP addresses and also do the NAT from the single DSL IP address. Your computers are all set up to receive a TCP/IP address via DHCP, right? Finally, I would create a location in 10.3.9 Network system preference that has ONLY the Ethernet network port configuration defined. Do not leave it set to "automatic" since it may try to connect using some other means (such as the modem). If you have upgraded to Airport 4.2, that may also be causing some problems, although it is the Ethernet connection we are talking about.
Note that I have had some problems with DHCP in the past so I use hard-defined Ethernet addresses for all my machines and not DHCP. Mine are all in the 10.0.1.x range (using the Airport Base station), but I think Linksys uses the 192.168.1.x range. You might try that, too.
How are you using your Airport Base Station? And what model is it? Do you have wireless clients? Did any of the above resolve the issue?
Steve
Maybe you are looking for
-
Displaying data in one row for for 2 tables without relaiton
I Have 2 tables without any relation and there is a common field and i want to display data like below table refdet 1) refdt----------refbr----refamt----refcat 10-aug-09---10-----34234-----101a 10-aug-009--11----23245-----102a 1-AUG-09----10----455.9
-
Need help with question about indesign 2014...
I am using indesign 6 on a pc - simple question: when I update to indesign 2014, will the update keep all of my previous and current work?
-
Hi all. I have no FC experience.....just some iMovie putzing with the family video's. I do use Photoshop CS5 and have years of experience with Pro Tools and work in film/TV production so I am not a total stranger to filmmaking and audio production, u
-
Apparent Battery Failure on 4wk-old Q5
I have a nice new (red) Q5 which would appear to satisfy most of my requirements, but in less than four weeks I'm already reduced to going from one charger to the next just to keep the handset working. A full charge will now be down to zero in less
-
How to execute Excel Marco from SAP using Office Integration Classes
Is there a way to trigger Excel Macro from SAP? I tried using method CALL METHOD document->execute_macro of i_oi_document_proxy but it does not work. Thanks Vivek