Problem with frame script

My project has two frames, each with the same frame script
attached. The only command is "go the frame", to keep the playback
head stationary. The script executes in one frame and is ignored in
the other. Debugging verifies that the playback head does go to the
frame where the script doesn't work. I get the same problem if I
write a different (identical) frame script for the problem frame.
I'm baffled. Help!
Thanks,
Bruce

On Sun, 10 Sep 2006 13:46:04 GMT, bd525 posted in
macromedia.director.basics:
> Yes. Either way:
> go the frame
> go to the frame
> I get the same result. The playback head stops in one
frame and not the
> other.
Any chance there's a sprite in that frame with a behavior
attached that does
a 'go' command?
Mark A. Boyd
Keep-On-Learnin' :)

Similar Messages

Problem with navigation script

Hi I'm having trouble getting a button work correctly when
pressed it should take user to a particular label on the main
scene. Is there a problem with my script? The button is inside a
movie clip which is inside another movie clip. Thanks in
advance.

this quite difficult to explain but here goes. i have a
complex button with a roll in roll out effect. ie. a movie clip
acting as a button that shows different buttons (in another movie
clip) when it is rolled over. I then want the different buttons to
go to other parts in the main timeline. the code works fine when
the buttons are on the main timeline but because it is within
another two movie clips it doesnt work like it should. In fact the
script i have used in the first movie clip also affects the button.
This script is as follows and belongs in the first frame of the
first movie clip. In other words, I need the button not to be
effected by the following script but by the gotoAndPlay script.
Thanks

Little execution problem with the script

declare
i number(1):=1;
name varchar2(10);
id number(2);
begin
loop
id:=&id;
name:='&name';
insert into emp values(id,name);
i:=i+1;
exit when id<=5;
end loop;
end;
When i tried to execute the script, it is going through the loop only once..What the problem with this script...Can any body help the script work?

if id is less or equal to 5 then loop will execute only once.
What is the variable i for ?

Problem with a script to remove graphics

Hello,
I have tried to build a javascript to remove all graphics whose extension is not ".EPS" (with "EPS" really in upper cases, as it is for Mathtype equations in Word import).
But It doesn't work and I can't understand why.
Here is the script:
//The script intend to remove all graphics whose extension is not ".EPS"
var myDoc = app.activeDocument;
var myGraphics = myDoc.allGraphics
//Remove graphic if graphic extension is different from ".EPS"
for (var p = 0; p < myGraphics.length; p++) {
    var myImage = myGraphics[p]
    if (CheckExtEps(myImage) != 0){
    myImage.remove ()
//Compare graphic extension with ".EPS" and return myExtValue = 0 if it matches exactly
function CheckExtEps(myImage) {
    var myString = myImage.name
    myExt = myString.substr(myString.lastIndexOf( "." ))
    myExtValue = myExt.localeCompare(".EPS")
    return myExtValue
When I run this script, ALL the graphics are removed, ".EPS" included.
I do have ".EPS" graphics in my document and I expected them not to be removed.
So there is something wrong somewhere, but I don't know what to change.
Any ideas?
By the way, I have a more generic question as a beginner:
I am working with ExtendScript Toolkit. How can I do to check my script step by step?
For exemple, how can I display my variables values as "myString", "myExt", "myExtValue" at each step?
Actually, this script is a step for a bigger script I intend to build to deal with Mathtype equations in Word import.
After not-EPS graphics beeing removed, I wish to relink all remaining equation prewiews to eps in a selected folder, by consecutive order.
But this is a big piece of scripting to swallow for me, so I'm working slowly, step by step.
TIA
Best regards
Nicolas

Hello Ariel
Thank you very much for your help.
1. I added semicolons at the end of lines, but the script result is the same.
2. Running line by line, I could see in the Console where is the problem:
variable "myString" is always undefined.
Well, I have to get more inside my script...
Thank's again
Best regards
Nicolas
Nicolas BALBO
[email protected]
22, rue d'Hauteville 75010 PARIS
Tel : 33 (0)1 42 57 14 31
Le 18 avr. 2012 à 17:36, Arïel a écrit :
Re: Problem with a script to remove graphics
created by Arïel in InDesign Scripting - View the full discussion
Well, I can't see any semicolons in your script. Maybe that's just the
email interface, but there should be semicolons at the ends of lines.
In the ESTK, you can step through a script a line at a time. Just click
on the downwards pointing arrow instead of the "play" arrow. Each time
you click, the script will advance one line. In the Console window
(Windw>Console) you can then type the name of the variable you wish to
examine.
Ariel
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4344039#4344039
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4344039#4344039. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign Scripting by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem with SAP Script FAX output

Hi Friends,
I have problem with SAP Script Fax output.
After I issued output using the messge type, the print preview format shows me correct alignments and the right data. But when I go to List display using the menu bar functions from the print preview screen, the list is showing me the right data, but all the alignments at the main window went wrong.
How do I rectify this problem? I need correct alignments in both form display and list display.

Hi Sasidhar,
Have you tried with different fax machine.
Regards,
Atish

Ultrasearch problems with Frames

I am having problems with Ultrasearch crawling pager with frames. When my ultrasearch crawler encounters a page with frames it does not crawl any of the frames. Is this because it is looking for an <a href> tag to follow or is there something I am missing within my Ultrasearch configuration? Thanks

The crawler will treat the subframe as separate URLs. Maybe it is due to how the
frame is generated. Note that the crawler can not handle jsp script.

Problem with some script--Help???

I've been trying to learn some new things with flash and
actionscript out of a book, I was trucking along nicely then I hit
this rut--
I keep getting an error with my script, but I am 99.9% sure
that the script is the same as it is in the book.
here is the code:
//----------<LoadVars>---------//
var myLV:LoadVars = new LoadVars();
myLV.onLoad = function (success){
if (success){
_level5.loadedInfo.htmlText = myLV.info;
} else {
_level5.loadedInfo.text = "There has been an error loading
the requested information .
Please contact the Webmaster and report your error.";
//---------------</LoadVars>-----------------\\
and this is the error message:
**Error** Scene=Scene 1, layer=actions, frame=1:Line 20:
String literal was not properly terminated
_level5.loadedInfo.text = "There has been an error loading
the requested information .
**Error** Scene=Scene 1, layer=actions, frame=1:Line 21:
Syntax error.
Please contact the Webmaster and report your error.";
**Error** Scene=Scene 1, layer=actions, frame=1:Line 22:
Expected a field name after '.' operator.
Total ActionScript Errors: 3 Reported Errors: 3
any suggestions??
thanks,
hutch

sweet, that fixed the error problem. Now i have to figure out
why my text won't load. The fun of learning!! I love running into
problems and spending an insane amount of time trying to trouble
shoot them, just to find the problem to be something so simple and
minute that it makes you hate your self,--but when it all works in
the end it feels so good.
thanks,
it is much appreciated.
hutch

Problem with Java Script after upgrade from BW 3.5 to BI7

Dear Colleagues,
We're facing the issue with Java Script after upgrade of BW 3.5 to BI7.
Just after update we checked the basic functionality and it occured that some of web templates that use Java Script don't work. They generate seelction screen, but after selection the screen becomes blank without any error messages.
We're currently stucked since web templates weren't converted to BI7 version so they should work exactly as before the upgrade.
We compared the Java code with other environment that was not upgraded - it's perfectly the same.
The only explanation that comes to my mind is that some Java Script settings on the server level were changed during the upgrade but I have no idea where I can check that.
Thanks in advance for any suggestions,
Andrzej Bobula

Hi Deepu,
Thanks, it was great to read your reply and then few minutes later talk to you live on SDN Day!
Unfortunately, http cache clean-up did not help. But there is another funny thing I found - for exactly the same 3.5 webtemplate html code returned from WebAS 3.5 was different then from 7.0.
Unfortunately, this editor does not allow to paste complete code, even in CODE brackets, but here are main differences:
<b>3.5</b>
if (navigator.appName == "Microsoft Internet Explorer")
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=1&CMD=GET_TEMPLATE"
name="Content">
and
<b>7.0</b>
if (navigator.appName.indexOf("Microsoft Internet Explorer")!=-1)
<frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=8&REQUEST_NO=0&CMD=GET_TEMPLATE"
name="Content" 0nLoad="javascript:loadTitle()">
(I intentionaly put 0 i/o o in 0nLoad, otherwise Forum's editor does not accept the text.
How about SAP's claim that technical upgrade from 3.x to 7.0 changes nothing?
Regards,
Vitaliy

Problem with action script 3 make input text box and button....

Hi every one I am trying to make a family book using "Air for Android" with a simple search engin in the book
air for android only work with AS3,
the search function is to type a person's name and hit submit then go to a specific frame.
have a problem making below code to work in AS3 and hopefully one of you guys can lead me in the right direction to fix the issue.
Currently, I have an input text box and a button. When you type specific words into the input box and then hit the button it sends you to a specific frame.
(it work find in AS2 but not in AS3,)
Here is my current code that is placed on the main timeline, first frame:
stop();
onEnterFrame = function () {
    submit.onRelease = function() {
        switch (yourname.text) {
        case "name1" :
            gotoAndStop(2);
            break;
        case "name2" :
            gotoAndStop(3);
            break;
My button that checks if the phrase is correct is called "submit" and my input box has an instance of "yourname".
My phrases that will be accepted in the input box are "name1" and "name2" which bring me to two different frames.
Basically, I'm having a problem with making this to work with AS3.

you should use the default option in the switch statement
that way yourname contains something not in one of the case statements it will go to the default bit and execute teh code there
function onSubmit(e:MouseEvent):void
                              switch (yourname.text)
                                        case "name1":
                                                  gotoAndStop(2);
                                                  break;
                                        case "name2":
                                                  gotoAndStop(3);
                                                  break;
                                        default:
                                                  goToAndStop(you frame you want);
                                        break;

Problem with sap script table in main window

hi all,
i have created a sap script for which output is in 7 pages.
except first page all the remaining pages are giving the correct output.
the problem with the first page is iam not not getting vertical lines in the table which is in the main window of page 1.
iam getting the vertical lines correctly in the mainwindow table of all the remaining pages.

Hi,
It's simple,
Pre- U should had declared a second page for the same window with header, main & footer.
now
First when u r looping the internal table provide no of rows eg Row 1 TO 10. in the Loop ( Data Tab)
or
when defing TEXT Go to PC Editor and mention all the fields Under PROTECT - ENDPROTECT.
This would solve the issue.
Thanks
Ravi

Wacky problem with Frame label

I have a menu set up with three items. Menu item one has
"gotoAndPlay("video"), menu item two has
"gotoAndPlay("somethinghere") etc...
My menu items two and three always jump to the correct frame
label. I am having a problem with the first menu item.
When you click through the menu items slowly, content loads
in correctly, but it seems that if you click different menu items
too fast, the first menu item jumps back the main timeline to frame
1. My menu is inside of a movieclip. This is where my frame labels
are.
Has anyone ever seen an issue like this before or know how to
prevent this wacky behavior?

use the goto methods, not functions:
_root.gotoAndPlay("video");

More problems with frames DOH!

Hokay, so, here is my program:
import java.awt.*;
public class ShowAFrame
     public static void main(String args[])
          Frame f;
          String myTitle;
          myTitle = "Test";
          f = new Frame();
          f.setTitle(myTitle);
          f.setSize(500,500);
          f.setIconImage(new ImageIcon("c:/javaprograms/book2.gif").getImage());
          f.show();
and here is my error message:
C:\JavaPrograms>javac ShowAFrame.java
ShowAFrame.java:13: cannot resolve symbol
symbol : class ImageIcon
location: class ShowAFrame
f.setIconImage(new ImageIcon("c:/javaprograms/book2.gif").getImage());
................................................... ^
1 error
I feel really stupid asking, but since this is a beginners forum, what am i doing wrong?
btw, the dots are added to manually move the carrot
Thanks

hint #1:
1) When it tells you: "ShowAFrame.java:13: cannot resolve symbol" it's saying that there's a problem with line #13, specifically, that there's a symbol that it doesn't understand.
2) Look at the carot. What's it pointing to?
Now, put 1 and 2 together. The compiler is telling you that there's a word on line 13 that it doesn't understand, and then it shows an arrow pointing to a word on line 13. Any guesses as to the culprit?
hint #2:
learn about import statments and their purpose

Problems with Java Scripting API

Hello Everyone!
Guys, I need help with Java scripting API. A problem is that I cannot understand how can I operate Java Object's fields and methods from the script language. I have chosen embedded javascript to work with. And I can get the fields and methods of in-box java classes (such as ArrayList for example), but I cannot work with methods and fields from my own classes!
Here is an example:
public class ScriptingExample {
    class MyClass {
        int myfield = 5;
        int getInt() {return 7;}
    public void runExample() {
        ScriptEngineManager mgr = new ScriptEngineManager();
        List<ScriptEngineFactory> factories = mgr.getEngineFactories();
        ScriptEngineManager factory = new ScriptEngineManager();
        ScriptEngine engine = factory.getEngineByName("JavaScript");
        MyClass mc = new MyClass();
        try{
            engine.put("mc", mc);
            engine.eval("print(mc.myfield); print(mc.getInt())"); // or engine.eval("print(mc.myfield)");
        } catch (Exception e) {e.printStackTrace();}
} If I run the code with the commented part it prints "undefined" instead of "5".
If I run the code as it is it prints error instead of "7":
undefinedjavax.script.ScriptException: sun.org.mozilla.javascript.internal.EcmaError: TypeError: Cannot find function getInt. (<Unknown source>#1) in <Unknown source> at line number 1
at com.sun.script.javascript.RhinoScriptEngine.eval(Unknown Source)
at com.sun.script.javascript.RhinoScriptEngine.eval(Unknown Source)
at javax.script.AbstractScriptEngine.eval(Unknown Source)
at solutiondatabase.ScriptingExample.runExample(ScriptingExample.java:26)
at solutiondatabase.Main.main(Main.java:49)
How can I fix it?

Guys,
please let me raise this topic because several new questions emerged.
(1) How can I get all the variables created inside my engine?
There are two kinds of variables: first kind is Java obejcts put inside the engine and second kind is the variables created in my script, such as 'var a = 4;'. How can I list all the variables of that two kinds?
(2) Is there is a way to make 'import static' to the engine? I dont want to write MyClass.MyEnum.MyEnumItem every time. Also, I cannot put the whole enum into the engine with engine.put("MyEnum", MyEnum); I can put only enum items separately: engine.put("MyEnum", MyEnum.EnumItemA);. Thats why I ask about static import.
(3) How can I cast engine variables back to java variables inside my java code?
Here is my example:
package mypackage;
import java.util.ArrayList;
import java.util.List;
import javax.script.ScriptEngine;
import javax.script.ScriptEngineFactory;
import javax.script.ScriptEngineManager;
public class Main
     public static void main(String[] args) throws Exception
          ScriptEngineManager mgr = new ScriptEngineManager();
          List<ScriptEngineFactory> factories = mgr.getEngineFactories();
          ScriptEngineManager factory = new ScriptEngineManager();
          ScriptEngine engine = factory.getEngineByName("JavaScript");
          ArrayList<Double> myList = new ArrayList<Double>();
          myList.add(5.0);
          engine.put("MyList", myList);
          engine.eval("MyVar = MyList.get(0);");
          System.out.println((Double)engine.get("MyVar"));
}The result is:
Exception in thread "main" java.lang.ClassCastException: sun.org.mozilla.javascript.internal.NativeJavaObject cannot be cast to java.lang.Double
+     at mypackage.Main.main(Main.java:28)+
Is it possible to retrieve my Double java object from the engine?
Edited by: Dmitry_MSK on Aug 6, 2010 1:56 AM

Problem with sap script

Hi All,
I have a problem with a sap script (PO) everytime when an item is deleted (on me23e) it doesn't display on the on the print preview and the client wants to see on the preview with a sign indicating the deleted item.
SELECT ebeln ebelp pstyp packno txz01 loekz
FROM ekpo
INTO TABLE it_ekpo
WHERE ebeln = po_no
AND loekz NE 'L'
AND loekz NE 'S'.
This is how it has been read from the ekpo.... Is there something that I need to change?
Thanks in advance.
Regards,
Fred.

Hi,
In EKPO table the field 'loekz' indicates the Deletion status.
So u can consider the deleted line item also.
u change u r query like this.
SELECT ebeln ebelp pstyp packno txz01 loekz
FROM ekpo
INTO TABLE it_ekpo
WHERE ebeln = po_no.
In it_ekpo table u can get all the line item(including deleted items).
Then u cn print the data.
Hope this will helps u.

Problem with ksh script

Hi
This is for scripting gurus,
I am on "SunOs"
I have created below ksh script to fetch table space info; problem is that I can not have any out put in my variable (TS_DATA);; I don't want to use utl file in my pl/sql can any one tell what went wrong with my script. Thanks in advance
temp() {
GET_DB_PASS
TS_DATA=`sqlplus -s /nolog <<EOSQL
whenever sqlerror exit failure
set serveroutput on
set feedback off
set pause off
set echo off
set heading off
set verify off
connect ${l_connect_string}
DECLARE
TYPE t_task_tab IS TABLE OF VARCHAR2 (1000)
INDEX BY BINARY_INTEGER;
t_tab_space_name t_task_tab;
t_tot_byte t_task_tab;
t_fr_byte t_task_tab;
t_max_chunk t_task_tab;
t_rpt_txt t_task_tab;
t_rpt_num t_task_tab;
l_count number :=0;
BEGIN
SELECT tablespace_name,NVL(SUM(bytes),1),1,1
BULK COLLECT INTO t_tab_space_name,t_tot_byte,t_fr_byte,t_max_chunk
FROM dba_data_files
GROUP BY tablespace_name;
FOR i IN t_tab_space_name.FIRST..t_tab_space_name.LAST
LOOP
SELECT NVL(SUM(b.bytes), 1) INTO t_fr_byte(i)
FROM dba_free_space b
WHERE t_tab_space_name(i) = b.tablespace_name;
IF (95 < 100-(t_fr_byte(i)*100/t_tot_byte(i))) THEN
l_count := l_count + 1;
SELECT t_tab_space_name(i),TO_CHAR(ROUND(100-(t_fr_byte(i)*100/t_tot_byte(i)), 2))
INTO t_rpt_txt(i),t_rpt_num(i) FROM dual
WHERE 95 < 100-(t_fr_byte(i)*100/t_tot_byte(i));
dbms_output.put_line(t_rpt_txt(i));
dbms_output.put_line(l_count);
END IF;
END LOOP;
END;
EOSQL`
echo $TS_DATA
temp

if this is SunOS specifice, is the wrong mailing list..
what about someting simple:
cat y.sh#!/usr/bin/ksh
temp() {
TS_DATA=`sqlplus -s /nolog <<EOSQL
connect scott/tiger
select count(*) from emp;
exit
EOSQL`
echo "${TS_DATA}"
temp
./y.shConnected.
COUNT(*)
15
>
so works fine on Linux......
not sure what you are up to, but
#!/usr/bin/ksh
temp() {
sqlplus -s /nolog <<EOSQL
connect scott/tiger
select count(*) from emp;
exit
EOSQL
temp
also should write the output to the stdout; not really sure why you need to use variables to store the results
guido

Problem with frame script

Similar Messages

Maybe you are looking for