Problem with freezing and volume control PLZ HELP

every time i go into my volme and ringtones and blackberry messenger settings and it just freezes and the only solution is to take out the battery,

i can not get my volume changed or turned of my company that i deal with is telus i have no volume on my phone what so ever

Similar Messages

I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

I'm having problems with 7.1 update my flash "flashes" now when I receive txt's and notifications! And I'm also having problems with freezing and wifi problems! How do I solve this?

Doh! Rectified flash!
But when face timing 2 seconds after it connects wifi disconnects? Any thoughts

Problems with parity and flow control using visa serial

I am trying to create a basic user interface with the options that my
company uses most often for a force indicator. You can configure
the indicator over serial, as well as read the values off the
indicator. I am trying to create the user interface so that using
producer/consumer loops with events, once you change a value, it will
write that new value to the serial port, ie the device.
The problem I am having is transfering the parity and flow control
values for the serial config to the Basic read write VI. The
problem is that once the consumer loop executes, it will write the
values correctly to the VI, but then the outer loop executes 200 ms
later and clears the values. I know that this is normal behavior
and that in order to keep the values stored, normally you would use a
shift register. I tried to use this and had some issues with
correct data types/array mis-mtaches, ets, so I created an indicator
and had a local vaible read the indicator, which seems to be working
for the stop bits, read bits, baud rate, etc, but not the parity anf
flow control. I always get "blank" outputs for theses values (if
you enable the digital display you can see that they are outputing the
value 0 which correspondes to None in both cases, which is
correct). Even though it appears that it is outputting the
correct value, I get an error that says the VISA property is
invalid. I initally did a search and found that my stop bit
control was wrong (outputting double instead of integer), but I could
not find anything on the parity/flow control issue. I even tried
to copy the serial config controls from the basic serial read/write to
my dialog box and that did not work either.
I would be grateful for any suggestions.
Thanks
Kenny
Kenny
Attachments:
BGI_main pandc.zip ‏232 KB

I should add that I am using LV 8.0 and that the serial config
indicator in the consumer loop will be off the frontpanel in the final
VI so that it is not visible to the user.
Kenny

Problems with WRT160N and Xbox 360 - please help

Hello,
I have recently purchased a WRT160N router and when I play games online (Halo 3 or Modern Warfare 2) it takes around 10 min to find a game while in the lobby. I don't get kicked out or signed out of my profile it just takes a long time. It says that my NAT type is Open. I have isolated that the problem is the router because if I plug an ethernet cable from the 360 to the DSL modem I find games instantly. I have looked up port forwarding and opened the ports on the 360 and specifically for modern warfare 2 and it actually made my NAT type go to strict, ironic. I have spent 5 hours trying to mess with this and can't seem to get it working right. If someone could please help me on the settings or have any other ideas that would be greatly appreciated.
Solved!
Go to Solution.

I have already tried reducing the MTU as well as the Beacon Level, Threshold, and Fragmentation. That did not work. To get the ip address of the modem is where I do cmd prompt ipconfig right. If so, I have not done that yet and since I am at work I will do that when I get home. the ports I have opened on the router for the xbox were 80, 88, 53, and 3074. Like I said when I did that it actually got worse cause my NAT was open but then it went to Strict.

Xfi Xtreme Audio Problems with Microphone and other things NEED HELP!!!!

? Alright i have exhausted my search for an answer for my problems.... This is a last resort now!
Im running Windows 7
st Problem: I was having problems with my microphone where people heard themselves through my microphone. Ok well i have a creative Fatility series headset with a supposed noise canceling mic. So last night i was like screw it imma put in the install disk for my sound card Xfi Xtreme Audio.
This Arose my 2nd Problem: Now that the drivers were installed and i finaly got a volume panel it says im running Windows Vista. The name next to my card says Sound Blast X-Fi Xtreme Audio (Vista). Alright so i am running windows 7.... What the heck! Next thing is my microphone doesnt even work! This is just awsome btw and im pretty sure the volume panel isnt even the way it was when i was on an XP system.
So if anyone has a fix to this problem let me know it would be great!

A quick update i was able to fix Problem 2, i had to get rid of what i installed so im just back to Problem . I dont have the VOlume Panel anymore but my microphone still seems to make it so that people can hear themselves....

Total iMac failure! Please help. Problems with freezing, and time machine

My iMac has started to go crazy over the last week. It started crashing repeatedly, so much so that it could take me 10 tries just to get it going. I was able to run disk warrior and disk utility and neither of those came up with any issues. I took it into the apple store and they repaired permissions and cleared the cache and of course nothing happened while the mac was in the store.
When I came home I started trying to clear out excess files and organize to save space and memory. I downloaded cleanmymac as well as crucial.com's scanner as recommended by the mac genius. Unfortunately, that night after everything had been working fine, the computer started crashing all over again. I get lines through my screen, it locks up, things get distorted, etc.
In addition, I noticed today that all of my time machine backups have been deleted from my machine. The only one that exists is a huge one that was created the day after it was examined at the store. I have no idea how that happened as I have not touched the time machine settings. To make matters worse, the time machine will not even back up now. It says there isn't enough space. (There are 160GB available). Shouldn't it just be making incremental backups? All I am doing at this point is deleting files anyway!
If anyone has any suggestions at all, please offer them!!!

Hi, unfortunately it sounds as though your Mac needs the attentions of an Apple Service Technician.
You do not say how old your Mac is or if you have Applecare..
In any event I feel you will do best as I previously said -> Apple Service Technician.
Don't forget to L I S T all your issues/worries......L

Problems with scrolling and Mission Control

I have this problem:
When scrolling down any page, the letters will blur at the top of the screen and not the bottom.
When swiping acrross pages in the launchpad, it occasionaly freezes half way between the two.
When I swipe up with four fingers to access mission control, the screen becomes very sluggish. Swiping back down (or clicking a tab) is even worse, causing slow "laggy" animations.
And this the report from EtreCheck:
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.5 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 0:3:16
Disk Information:
          APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (309.44 GB free)
          HL-DT-ST DVDRW GS41N
USB Information:
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Configuration files:
          /etc/hosts - Count: 1
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents:
          [not loaded] com.bose.soundtouch.plist Support
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
          [loaded] com.google.keystone.agent.plist Support
          [running] com.spotify.webhelper.plist Support
User Login Items:
          iTunesHelper
          Spotify
          BitTorrent
          Autodesk 360
Internet Plug-ins:
          SharePointBrowserPlugin: Version: 14.0.0 Support
          FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
          AdobePDFViewer: Version: 10.0.0 Support
          Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player Support
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               2%          WindowServer
               2%          SoundTouch music server
               0%          fontd
               0%          BitTorrent
               0%          mds
Top Processes by Memory:
          90 MB          mds_stores
          86 MB          Safari
          78 MB          Spotify
          57 MB          Spotify Helper
          49 MB          ocspd
Virtual Memory Information:
          1.83 GB          Free RAM
          1.44 GB          Active RAM
          190 MB          Inactive RAM
          558 MB          Wired RAM
          303 MB          Page-ins
          0 B          Page-outs

I have this problem:
When scrolling down any page, the letters will blur at the top of the screen and not the bottom.
When swiping acrross pages in the launchpad, it occasionaly freezes half way between the two.
When I swipe up with four fingers to access mission control, the screen becomes very sluggish. Swiping back down (or clicking a tab) is even worse, causing slow "laggy" animations.
And this the report from EtreCheck:
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.5 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 0:3:16
Disk Information:
          APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (309.44 GB free)
          HL-DT-ST DVDRW GS41N
USB Information:
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Configuration files:
          /etc/hosts - Count: 1
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents:
          [not loaded] com.bose.soundtouch.plist Support
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
          [loaded] com.google.keystone.agent.plist Support
          [running] com.spotify.webhelper.plist Support
User Login Items:
          iTunesHelper
          Spotify
          BitTorrent
          Autodesk 360
Internet Plug-ins:
          SharePointBrowserPlugin: Version: 14.0.0 Support
          FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
          AdobePDFViewer: Version: 10.0.0 Support
          Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player Support
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               2%          WindowServer
               2%          SoundTouch music server
               0%          fontd
               0%          BitTorrent
               0%          mds
Top Processes by Memory:
          90 MB          mds_stores
          86 MB          Safari
          78 MB          Spotify
          57 MB          Spotify Helper
          49 MB          ocspd
Virtual Memory Information:
          1.83 GB          Free RAM
          1.44 GB          Active RAM
          190 MB          Inactive RAM
          558 MB          Wired RAM
          303 MB          Page-ins
          0 B          Page-outs

Problems with Superdupe and then Winclone - please help!

Okay..
I just got a 17" and I used Superdupe to clone my 15" and used Winclone to do the same for my windows partition.
I bought a new 500 gig hard drive and formatted it. I formatted it to Mac OS Extended Journaled with just one partition.
After cloning (2 hours or so..) - I restarted with the new hard drive in the new 17" and went to bootcamp and it says...
"The startup disk cannot be partitioned or restored to a single partition. Restore your information to the disk and try using Boot Camp Assistant again."
Ok - so I went back to disk utility and did it all over again - making sure there is just one partition... now after 2 hours and super duper working again.. I am getting the same message from Boot Camp..
Any help!!! I just did this about a month ago and did not have this problem.. I think what I did last time was partition the drive in Mac and boot in windows and make the partition a windows format.. which I think worked.. but I cant remember..
Its about to drive me nutz..
thanks!
Mark

I have no idea what you are doing since you didn't make that very clear. However, what you need to do is this:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the drop down menu to One. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
I would be careful about trying to restore your clone from your other computer because the new 17" may require a new build of OS X. If you restore your other system it may not be fully compatible or not even boot the new one. Better to install the version of OS X that was included with the new computer's installer discs. You can always restore your data files separately from your backup clone.
Once you have a working system open Boot Camp Assistant and use it to create a new Windows partition to which you can restore your Wincloned backup. Note that in earlier versions of WinClone it would only restore a Windows partition to the same hardware. It may not restore to your new hardware.

Problem with freezing and hour glass comes on as if updating every 10 minutes or so and lasts for 52 seconds or more.

When I am on a site, any site, or writing an email every ten minutes or so, the hour glass comes on and I cannot do anything but wait. I think it is updating something. How can I stop this?

Updating to Firefox 8.0 might do it, unless there is damage to the places.sqlite indexes, anyway this is the fix, and I actually option (same as all options).
freezing at regular intervals: http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
: https://addons.mozilla.org/firefox/addon/places-maintenance/
:<br>Install add-on, run at least the option mentioned in the article, I ran them all. When finished you can uninstall the extension, all without taking taking Firefox down, The extension is one of the new JetPack extensions.
Thought I was having that problem right now, but it's my anti-virus scan, usually ties things up pretty much.

A problem with LOV and my query. Help to solve, please...

Hello!
Here is a query:
SELECT FULLNAME||', '||(SELECT NAMEOFGROUP||', '||(SELECT CITY FROM CITY WHERE PRKEY=TLL.CITY) FROM GROUPS TLL WHERE PRKEY=TL.GROUPOF) t ,PRKEY r FROM MINEUSERS TL
In SQL DEVELOPER it works fine. But in APEX - when I try to save my "SELECT LIST" - it falls with error - "If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query."
How can I reassemble my query to fix this problem - I have no idea... :(
Thanks

You may create a pipelined function returning two values, display and return, to return
the result from your query. After that, your LOV should work. See example here:
http://htmldb.oracle.com/pls/otn/f?p=31517:146
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Problems with J2ee tutorial-Bookstore1 example--Plz help

Hi,
I have been working on the bookstore1 example servlets from the J2ee tutoril for quite a few days.
I followed the same procedure as given in the tutorials to deploy the application.
Wen i type
http://localhost:8080/bookstore1 on the browser,
I get the erropage.html and the .gif file listed.
But when i try to use
http://localhost:8080/bookstore1/bookstore it issues an error message
saying "The application is unavailable. Please try later."
I happened to see the same question posted by many,,,and the solution being,,the Pointbase server should be started in the background
I think my Pointbase server is running fine...But anyway i would be greatful if anyone cud reply in much detail about the configuration and working of the pointbase server.Or if my problem is due to some other cause,,please let me know.I jave all the properties set in the "asant listprops".
Please help
S&S

Hi,
I have been working on the bookstore1 example servlets from the J2ee tutoril for quite a few days.
I followed the same procedure as given in the tutorials to deploy the application.
Wen i type
http://localhost:8080/bookstore1 on the browser,
I get the erropage.html and the .gif file listed.
But when i try to use
http://localhost:8080/bookstore1/bookstore it issues an error message
saying "The application is unavailable. Please try later."
I happened to see the same question posted by many,,,and the solution being,,the Pointbase server should be started in the background
I think my Pointbase server is running fine...But anyway i would be greatful if anyone cud reply in much detail about the configuration and working of the pointbase server.Or if my problem is due to some other cause,,please let me know.I jave all the properties set in the "asant listprops".
Please help
S&S

Problem with Installation of essbase 11v, plz help

hi,
when it checks for pre requisites, giving one error message ""*bold host name resolved to an IP address-192.168.1.101*"".
on Aug 30, 2010 5:23 PM

Sundeep,
I blogged on this topic a while back, http://www.artofbi.com/index.php/2009/05/hostname-resolved-to-an-ip-address-windows-2008-hyperion-system-11-installation-issue/
This should provide you with the context under which you received the message in bold.
Also, pay attention to John's reply. When installing any software such as the EPM suite, read the Oracle documents to ensure that your environment is certified. Even if you do manage to install on XP or a non-certified environment, you may run into issues shortly down the road and waste a lot of time trying to solve the unsolvable simply because the instructions were not followed correctly from the beginning.
Cheers,
Christian
http://www.artofbi.com

HT4946 Problems with ITunes and storage purchase. HELP!

I utilize the ITunes app frequently. Today, it suddenly disappeared from my iPad and IPhone! Please, contact me to help me reinstall it. I've tried everything I know to do, at this point. Secondly, I recently purchased more storage from ICloud, and, as of now, it hasn't increased my storage capacity. Ugh!
Thank you for your help!
Best regards,
Amy Trela

Your purchase of more iCloud space hasn't increased your capacity where ? It won't increase the available space on your iPad.
If you can't find the iTunes app on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > iTunes being set 'off' ?
If not then have you tried a reset to see if you can find it after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Real Problems with Feedburner and iTunes. Please help!

I've tried numerous things to figure out whats going on but havent been able to pin point it. Maybe someone here can help. My latest podcast episode has not shown up in iTunes yet and it has been almost 2 days. I've tried pinging the iTS and pinging feedburner but I'm not sure what's going on. For my first 2 podcasts everything went fine but for this one, the feedburners site says it was unable to create an enclosure for the podcast. Any clues on where to even start? I'm not really a code guy so I don't know what to do. Here's my feed URL and the site I post my podcasts too:
http://moviepool.wordpress.com/feed/
http://moviepool.wordpress.com
feedburner feed:
http://feeds.feedburner.com/moviepool

interesting. I see they are in the iTunes Store now. Last night after I pinged iTunes AND feedburner it didn't show up. What is the usual wait time for pinging the sites? Maybe I need to just be a little more patient
All I care about are the actual mp3 episodes of my podcasts. I don't care about the other links or image files.
Bones

Problems with bxslider and fancybox. Please help!

Hi guys,
I'm making a site for a client and have made a gallery using FancyBox. Everything worked fine until I implemented bxSlider into the gallery.
The two are conflicting - although it seems that bxSlider has the upper hand as that still works (albeit out of position at the moment!)! The images using FancyBox just load the link to the image as if FancyBox wasn't installed...
If you click here, you can hopefully see what I mean.
Does anyone have any ideas on how I can get both to work?
Thank you,
SM

I didn't see it the first time, you still have 3 versions of jquery. 1.7.1, 1.7.2 and jquery-latest.js (v1.8.1).
The best way to get all of these scripts to function on the same page, would be to start with scripts written for the same version of jquery. I know 1.8.x had some issues (from a post by Nancy O.) and older scripts stopped working. It might be best to use 1.7.2 now that I think of it.
You might be able to use 1.7.2 in place of the first jquery reference and clear out the other two references. If that doesn't work, you're going to need to find or re-write compatible scripts.

Problem with freezing and volume control PLZ HELP

Similar Messages

Maybe you are looking for