Problem with front panel USB connector

Motherboard: MS-6750
I have a problem with my front panel USB connector JUSB2 not working.
I have checked the connection to be sure that it is oriented correctly.
I also made sure that it was enabled in the BIOS.
Still no luck. There is not any voltage on this either.
I see a jumper or pin labeled JGS1 just below the JDLED1...do not know what this is and cannot find it in the manual.
Any ideas on what this is and how I might trouble shoot the USB connector?

Which 6570 MB do you have, if its the K7N2 Delta 2 Platinum and came with the Dled bracket try plugging that into that port on the mainboard and see if those usb ports work as it could be the usb hub itself not working on the front. Hope this helps Dok

Similar Messages

Problems with front panel audio input on hp media center pc

I can't get the audio input phono jacks on the pc front panel to work. Am trying to transfer audio casstettes to my pc. Cassette player works fine.
This question was solved.
View Solution.

Please provide the model number or product number of your system to support you further...
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Z87-G43 Board Front panel USB Problem

I have installed the board and windows 7 64bit
Updated the Bios and checked everything I could. I do NOT get the connect tones from anything I connect to the front panel USB ports. I have used 2 (KNOWN GOOD, works on other machines) connector sets with 2 ports each, and ALL of the ports have the same symptoms. All of the usb devices have the connect tones when inserted to any of the rear ports. I have not tried the USB3 port for the front because I do not have the wiring and related header connector. My phone, (Samsung GS4) when connected to the rear ports always opens an explorer window showing the Ext SDCard and the Internal memory. when I connect to any of the front panel ports, no sound, no pop-up of explorer, but I do see the device when I manually open explorer and can open the connection manually.
I am at a loss as to what is not right and how I can make it work correctly. If anyone can give me any information to correct this, I'd be very grateful. (Tech Support was no help)
Thank you, and Aloha From Hawaii!

Thank you for your reply.
I have an older Antec Case and I have tried a brand new front panel connector I got from Frys and it acts the same Way. the only difference is that the connector is a one piece assembly that connects directly to the mobo header pins. the one in the case has individual pin connectors. both systems end up with the same scenario. When I plug in a thumb drive, there is no connect or disconnect sound and I still can manually open explorer and access the thumb drive or my phone but nothing pops up to signify any port access.BTW, I am a systems engineer and have spent the last 13 years building machines for a transportation company (bus) My previous board in the same case used the front panel connection and it worked just fine, but since the board died and was only supportive of XP I decided to upgrade to Win 7 64bit and have 16gb ram. All the rear connectors work just fine, but I need all of them so have to use the front panel connection for phone, and thumb drive access. I suspect the mobo has a design problem. The tech support person had no suggestion to correct this problem too! :<(

~~KT4V~~ Front Panel Pin Connectors (USB + Audio)

Hello All
I have a few questions on setting up the front panel pin connectors from my case to my new KT4V board.
First question: USB
My case is usb 2.0 (Raidmax Scorpio)it has two seperate pin connectors a 4 pin and a 4 pin + GND pin on the second wire. I assume I put the GND in the JUSB1 #10 slot which is marked (USBOC) in my manual. Is this correct?
Second Question: Front Audio (Microphone, Headphones)
The front panel Audio Connector: JAUD1
The four pin connectors that my case has labeled is:
1. MIC DATA
2. MIC GND
3. EAR R
4. EAR L
I am pretty sure MIC DATA goes in pin #1, and MIC GND goes in pin #2. As far as both EAR pins, I am not sure and would appreciate some help in this.
Thanks in advance.
ncarme :D

I know, I have the book in front of me. But the names on the board and my case are different. Thanks for the info on the usb, how about the audio inputs.
Thanks.
ncarme

Front Panel USB Power

MSI P4M900M2-L, 945GCM5, G31M-F.
Does anyone know how to solve the problem when using Internal card reader + Bluetooth device on this motheroard, the Bluetooth can function normaly but card reader can't, when only disable bluetooth then the card reader can funtion. Both devices are plug in the motherboard JUSB 1 Slot (Front Panel). When plug in a USB Flash Drive and a External Harddisk to the front panel usb at the same time, the USB Flash can work but the Extrnal Harddisk can't.
Any solution for this? Is it the JUSB slot cant produce enough power?
Thank you

The Bluetooth and Card Reader are 2 in 1 device that using a slot in Motherboard (JUSB), after login to windows, the bluetooth can function but when insert flash card the system cannot detect the card but when disable the bluetooth then the system can detect the flash card.
The Front Panel USB problem is when USB Flash Drive and External Harddisk using Front Panel USB slot, only the USB Flash can detect. (With or without card reader also same problem)
These problem seems like lack of power supply from motherboard and only allow 1 device run at the same time, although trying to change Ram, power Supply, Processor but the problem is the same. Customer claim that the card reader can run smoothly in Gigabyte and Intel motherboard, and dont know why these 3 model MSI 7255, 7267, 7345 facing the same problem.
What is the best solution to produce more or stable power or to allow these device run properly?

Hp p6367c front panel usb ports: how do I access these?

There is a button in front along the side that I assume is supposed to open the expansion bay and provide access to front panel usb ports, but nothing happens when I press this button.

Please look the upgrade and service manual page 13. You will notice the DVD drive, the empty 2nd CD/DVD bay, maybe the pocket drive (if so equipped). Below that is the mystery USB ports, and audio ports.
The panel likely has a small tab, and the access panel flips up, or slides up/down. Without knowing the exact face plate design, it's difficult to know. But if you look at the manual, the mystery will be exposed.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Z87-G45 front panel USB is SLOW

Ive had this computer running for about a year and all of a sudden it is SLOW via the front panel USB connections. The 3.0 port transfers at about 4-8mbs and the 2.0 about the same.
It use to fly through transfers with the 3.0 up in the 60-80 range.
This just happened overnight and not sure what to try to fix it.
Id rather not do a system restore.

Are you using Windows 8.1 ??
did you check if REAR USB 3.0 works ok??

Problem with tabbed panel

I have a problem with tabbed panel...this panel has 3 columns, I copied to each of them a diffrent text (diffrent height)...I expected to obtain diffrent working area of column, for example 1st column-height 7500 px, 2nd-1500 px, 3rd-2500 px, but I received one height 7500 px, each column has been formatted to this size....below a text I have “empty space”- (it is a diffrence between working area and text area)...I put the text to the 1st column for example 7200 px height, empty space below this text is 300 px I received 7500 px of working area in this column, here the problem doesn`t exist but….2nd column i have height of text for example 1300 px, below this text i have 6200 px empty space...It should be height 1300 px of text and maybe 200 px of empty space...so the working area could have at 1500 px not 7500 px of height....I try to change it (to for example 1500 px) but it still return to the basic 7500 px height and can`t do it...The solution is to use another form like. the accordion form..but it is a row form….when you put a diffrent sized text (height) you will receive diffrent size of working area (height), you obtain 7200px text +300 px empty space=7500 working area in 1st row.. 1200 px text + 300 px empty space=1500 workin area px in 2nd row and 2500 working area px in 3rd row…everything is fine in this form…each row has been formatted to the different size of height…but I prefer to use a tabbed panel (column form) instead a accordion form.…I don`t to waste the time to correct the code in html text editor like PSPad…
Best Regards
Kamil

A couple of threads here that should answer your query.
http://forums.adobe.com/message/5080345
http://forums.adobe.com/message/5104253
Thanks,
Vinayak

I have some problems with element Panel Label and Message.

I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
BEST REGARDS

You can simply remove the label attribute for the input text on the page.
sid

Front panel USB - Where to hook up?

I've just put together a system using the 845GE Max M/B. I would like to make use of the front panel USB ports on the case, but can't figure where to plug them in. I'm using the USB 2 card, and there's another USB jack on the M/b...
Any ideas?
Thanks,
Wedge

Looks to me like JUSB1 or JUSB2. It's in the manual.

Building dll with front panel

Hi all,
do you know, can i build with LV Builder dll that will run with Front Panel open when i call it from some another VI?
I tried build it, but not succesfully.
The prolem was that if i select in VI properties "Show FP when loaded", dll runs with FP open, but property "Show FP when called" doesn't give same results. Dll runs, but in background.

Nadav,
Did you see this recent post about LabVIEW calling LabVIEW DLLs?

Front panel audio connectors

I have an msi 915p combo-fr mainboard and i am trying to connect it to my front panel audio connectors?do someone knows how to plug these cables?

Connect the front audio cable to this connector
Cheers

Help with front panel audio on K9N board.

Okay, I admit I'm a bit of a moron with front panel audio but I just can't figure out how to configure this board with my case. Here are the pins:
Case:
Mic In
Mic Bias
SpeakOut L
Return L
SpeakOut R
Return R
Ground
Motherboard:
PIN    SIGNAL      DESCRIPTION
1    PORT 1L      Analog Port 1 -Left channel
2    GND      Ground
3    PORT 1R      Analog Port 1 -Right channel
4    PRESENCE#     Active low signal -signals BIOS that a High Definition Audio dongle is connected to the analog header. PRESENCE# = 0 when a High Definition Audio dongle is connected.
5    PORT 2R      Analog Port 2 -Right channel
6    SENSE1_RETIRN     Jack detection return from frontpanel JACK1
7    SENSE_SEND     Jack detectionsenselinefrom the High Definition Audio CODEC jack detection resistor network
8    KEY      ConnectorKey
9    PORT 2L      Analog Port 2 -Left channel
10    SENSE2_RETIRN     Jack detection return from frontpanel JACK2
I haven't been able to make any sense of the two, so if anyone here can help, I would appreciate it very much.

Quote from: crazy on 09-June-06, 15:51:46
You may tell us more information about your mainboard, please give us the detailed name of your mainboard. :D Then there will be more users could give some suggestions.
Sorry, there aren't that many K9N boards out there, but mine is the K9N Platinum MS7250 Version 1.0. It's the AM2 non-SLI nVidia nForce 570 Chipset model.
Thanks for any help.

MSI K8MM-V problem with front usb

Hi to everyone.
I have a problem with this motherboard MSI K8MM-V .
The rear ports usb work fine as usb2, but the front ports work as usb 1.
The pins of the case are certified for usb2, so I think the problem is of the motherboard.
Someone can tell me how can I do to use the front ports of my case as usb 2 ?
Thank you.

Quote from: Henry on 10-February-10, 07:10:31
If you remove the last black wire shown in your picture (the one I cropped and has red arrow) It should fix your problem. All USB plugs to be used on MSI MB should have red (pins 1 & 2), white (pins 3 & 4), green (pins 5 & 6), black (pins 7 & 8). Pin 9 (key, no hole), pin 10 (hole, no wire).
Thank you dear friends !!!!
I removed the last black wire and now my front plugs work as usb 2.0 !!!!!
I am really happy, thank you to everybody !!!!

Front panel led connectors cables problem

Anyone knows how to connect the cables for the front panel power and hdd switches and leds to the jumpers on the board? The cables have wordings printed on one side of the cables (power led.. hdd led.. etc).. i'm not sure which side should be facing up on the board ... is it the side with the wordings facing up or the opposite side without the printed wordings ? i'm worried that i may end up short circuiting the board if i connec them the wrong way round ... thanks

The are just switches, so there is no polarity to worry about. the led's are polarity sensitive, so If they don't work, just reverse the connection; no damage will occur.

Problem with front panel USB connector

Similar Messages

Maybe you are looking for